Break on change in watch expression

Hello,
is there a reason why one cannot set the check mark 'break on change' from the very beginning but only if the program is running (requiring an additional breakpoint)?
My scenario: I have added a watch expression for a variable by clicking on the variable in the source code window and subsequently Ctrl+F7. In the watch window, the variable name is shown, but in the field 'Break on Change' no checkmark is shown. Hence I need to add a breakpoint at the first line of main () just to set this checkmark...
Solved!
Go to Solution.

Hello Wolfgang,
In 2013 the "Break On Change" behavour was changed.
You can read detalied information in Release Notes, section Watch Window.
Break on Change is available only for watchpoint that represent the contents of a memory adress(LHS expression). If you are not debugging the watchpoint can't be evaluated, the debugger doesn't know the memory adress of that expression.
Constantin.

Similar Messages

Airport Utility 6.0.0 breaks support for my Airport Express

Computer updated to Airport Utility 6.0 but that breaks support for my Airport Express. When I try to access the Airport Express it tells me I have to download Airport Utility 5.6 - but I can't find that anywhere on the Apple sites to download!

My catch-all list of Airport 6.0 & Firmware 7.6.1 problems:
~~~~~~~~~~~~~~
I've compiled a catch-all list of problems and changes with Airport Utility version 6.0 and FW 7.6.1. Some of the items may be relevant to this thread.
THE PROBLEMS WITH AIRPORT UTILITY 6 AND FIRMWARE 7.6.1:
Introduction: If you find AirPort Utility v6.0 too limiting or strange, you can ALSO install AirPort Utility v5.6, released alongside v6.0, to maintain all your previous capabilities. It works fine with both Airport g and n devices.
PLEASE NOTE: According to Apple you must FIRST install Airport Utility v6.0 in order to access and install Firmware upgrade 7.6.1. Do that first. THEN install Airport Utility v5.6 and use it instead if you prefer. HOWEVER: Another user has informed me that they were able to use Airport Utility v5.6 to install Firmware v7.6.1 without any problems! This would mean anyone can avoid Airport Utility 6.0 entirely if they chose.
~~~~~~~~~~~~~~~~~~~
1) According to Apple's documentation, Airport Utility version 6.0 is ONLY for Mac OS X 10.7 Lion. It is NOT for 10.6 Snow Leopard. If you accidentally installed v6, you'll have to dig around in Apple - Support - Downloads for the previous relevant version for your devices and OS version. Here is the relevant page:
http://support.apple.com/kb/DL1483
2) The HELP for Airport Utility has been updated. When you first access it you may well be looking at the old Help. It is supposed to update itself spontaneously over the Internet. It took a couple minutes in my case. Be sure you are looking at the NEW Help before you start using it. One way to tell is that the list of help topics essentially doubles from what there used to be. Also, the very first topic in the NEW Help should read:
"Set up an AirPort device > Set up a new AirPort Base Station or Time Capsule"
3) The HELP has some WRONG information. Here we go:
3a) There is NO "Enable Guest Network" setting. You CANNOT create a guest network or name it or give it any settings. Why this is still listed in Help, I have no idea. Why the setting is gone: This is most likely because the technology behind guest networks, WPS, has been thoroughly CRACKED in the wild. Google "WPS cracked" for lots of documentation of the situation. It won't be resolved soon.
3b) I can't find any 'Setup Assistant". Everything is now manual. This is not to say that there isn't a setup assistant that appears when you FIRST set up your Airport device. I don't know.
4) After installing Airport Utility v6.0, there is no indication of the accompanying firmware update until you decide to run the new version. Even then, you have to click on the big icon of your Airport device and notice an 'Update' button about halfway down the popup window. You then have to assume that this button is telling you to update your firmware.
5) After you update your Airport device's firmware, you may well discover an ERROR subwindow popping up inside Airport Utility that says:
"An error occurred while updating the firmware. -6721"
Don't panic! All you need to do is go into your Wi-Fi settings, either in your menubar or the Network preferences, and turn OFF Wi-Fi, then turn ON Wi-Fi again. This is part of a long standing bug in Lion's Wi-Fi with which I bet you are already familiar, certainly up through Lion version 10.7.2.
6) Miscellaneous changes in Airport Utility 6:
6a) The keyboard command to manually change your Airport devices settings is GONE. You have to click the little 'Edit' button after clicking on the big icon for your device.
6b) There is no longer any summary window for your Airport device. You have to instead click on the big "Internet" icon for related data, then click on the big icon for your Airport device for local settings data.
6c) There is no longer any HELP advising users to EXPORT their settings. (The Help only talks about Import of settings). BE SURE TO EXPORT YOUR NEW SETTINGS! I did this immediately after both updates.
6d) MAC address filtering for Airport devices is GONE.
6e) All references to IPV6 anywhere are GONE. I have to assume the IPV6 settings are now entirely working and entirely automatic. Let's hope so.
6f) Signal and Noise data and graphs are GONE. Use Apple's Wi-Fi Diagnostics app instead. Apple have hidden it here in Lion:
/System/Library/CoreServices/W-Fi Diagnostics
6g) In order to access the menu items in Airport Utility, you have to first click on the big icon for your Airport device.
--> No doubt there are other changes, oddities or bugs related to these changes. But this is what I came up with during a cursory strafing of the software.

TestStand 4.0 Watch Expression Panel Patch

There is a patch available for TestStand 4.0. This patch improves the performance of the Watch Expression in the TestStand 4.0 Sequence Editor. For more information regarding this patch, please see the Readme.
http://joule.ni.com/nidu/cds/view/p/id/878/lang/en
Message Edited by AllenP on 08-30-2007 01:04 PM

Hi,
The TS is a hidden property of the Step.
You can unhid this property by a setting in the Station Options select the Preference Tab.
You actually dont need to enable this setting, you could of just typed it in (, the .TS.id I mean). But when learning it is handy to see all the properties.
Regards
Ray Farmer
Regards
Ray Farmer

Using TestStand API Engine to programatically set watch expressions?

I would like to auto populate the Watch Expression window when I start a sequence. This would allow the test developer to set up a list of variables once and have them available all the time, for troubleshooting. I see references in Test Stand help to insert, remove, clear, etc, but I haven't been able to figure out how to access them. Getwatchexpressions is all I can find, so far. I have looked in TS 3.5 and 4.

That was the hint that I needed. I am attaching a simple sequence that populates a watch expression. May be useful for others.
Attachments:
testwatch.seq ‏20 KB

Flex development - Debugging - watched expressions & variables

Hello to all!
I use Flash Builder 4 Standard as Eclipse Plugin. I can debug and see the variables and the watched expressions.
Now I am using a different library and I have a variable which has many attributes, inherited attributes, ...
Is it possible to search the whole variable for a string, so I can easily find the attribute which I need?
With right-click "find" I can only search for the name of the attributes and only in the first depth. I need a search for all depths and on the values.
Is this possible? Or what can I do instead of going through the whole listing?
Best Regards PHANTOMIAS

"dcjava" <[email protected]> wrote in
message
news:ggp5uu$ndd$[email protected]..
> I have a Flex Demo application that I'm trying to debug.
There is a
> variable
> defined as follows:
>
> var itemToUpdate:XMLList
>
> If I add a trace statement as follows, I'm able to see
the value of the
> quantity displayed in the Console:
>
> trace(itemToUpdate.qty); <-- This works!
>
> But if I add a "Expression" in the debugger like this:
> "itemToUpdate.qty".
> I get the following value displayed in the "Expressions"
debugging view:
> "<errors during evaluation>".
>
> What am I doing wrong? Why can't I add watch expressions
for an XMLList
> type?
>
> Version: Flex 2.01
http://flexdiary.blogspot.com/2008/03/debugger-and-e4x.html

PSE 12 Changes to Watch Folder

I want to make changes to Watch Folders. In Organizer
When I click on Watch Folders I get the following? "To enable watch Folder Functionality Please start the Adobe's Active File Monitor service from Service Manager (Control panel --> Administer Tools-->Services).
could somebody kindly tell me how I can find this 'Control Manager'.

The file is actually located at this link (windows 7):
<C:\Program Files (x86)\Adobe\Elements 12 Organizer\PhotoshopElementsFileAgent.exe>
Just click on the file and launch it to see if it works for you.
Good luck and post back if this didn't work.

Watch Expression Settings error

If I have a parameter declared as a number and I pass an array element to it, by reference, I have problems trying to watch the parameter value.
If I double click on the glasses in the 'Watch Expression' window the 'Watch Expression Settings' dialog pops up. If I click on the Expression control and try to expand the Parameters value, TestStand fails with the following error...
Expected container, found number
Error code -17308. specified value does not have the expected type
Source 'TSAPI'
If I manually type into the watch expression field it's O.K.
(This is with TestStand 3.5)

Hi,
yep - I get exactly the same issue and we had the issue in TestStand 2.x too before but fixed it in 3.1.
http://forums.ni.com/ni/board/message?board.id=330&message.id=5107&requireLogin=False
This was reported to R&D (# CAR ID 46J4EOW3) for further investigation. Unfortunately the only workaround is to type it in manually, or to go to the context tab when you're on the breakpoint and right click it, select "copy property path" and paste that into the watch expression box instead.
Thanks
Sacha Emery
National Instruments (UK)
// it takes almost no time to rate an answer

Using ipad with remote app, I cannot change to watching a movie from listening to music through Apple TV without resetting the procedure. It only changes the song

Using ipad with remote app, I cannot change to watching a movie from listening to music through Apple TV without resetting the procedure. It only changes the song

it might be worth checking your TV settings to see if it has an option for different settings based on whether using the tv speakers or headphones.
Normally you should be able to control the sound via the tv.
Have you tried it without the headphones?

Change color stroke expression

Hi everybody,
I´m using the stroke effect applying on a mask with a wave wrap effect. I have a music track with a "convert audio to keyframes" done.
I´d like to vary the stroke color with the speed of the music.
If the music accelerate, the stroke will pass to red, and when the music slows, it´ll converrt to green.
Have you got a expression to help me? There is another way to do this without expression?
Tks a lot and have a good wee!

Facts:
Your audio to keyframes produces a range of values that you can easily see using the graph editor
The range of values that Audio to Keyframes generate denote volume not tempo
Color values can be driven by an expression
Color values are an array of 4 values from 0 to 1
The array that would produce pure red looks like this [1, 0, 0, 1]
The array that would produce pure green looks like this [0, 1, 0, 1]
The linear expression function converts one range of numbers to another for example: linear(t, 0, 100, 1, 0) as the value of the property t changes from 0 to 100 the output changes from 1 to 0
Since there is no automatic beat counter in AE and expressions pull values from the current frame, devising a mathematical formula that looked for the time difference between the loudest volumes in the timeline would not only be difficult to create mathematically it would take longer to calculate for frame 20 than it took to calculate for frame 10 the easiest solution would be to simply add an expression control slider to the layer and animate the value based on your perception of the tempo
If you wanted to emphasize the beats instead of the tempo the same expression could be driven from the keyframe values of the Audio To Keyframes layer left, right, or both channels. Change the range of the first set of values to correspond to the minimum and maximum values you observe in the graph editor.
Here is an expression for driving a color change with an expression control slider named more green.
t = effect("More Green")("Slider"); // slider value
r = linear(t, 0, 100, 2, 0); // value of red
g = linear(t, 0, 100, 0, 2); // value of green
[r, g, 0, 1]
Note: to prevent the luminance value falling to 50% when the slider is at a value of 50 the upper value must be set to 2 instead of 1. Color will clip the value at 1 unless the project is set to 16 or 32 bit. Even with a 32 bit project the color will appear normal unless you are using a blend mode on the layer.
An easier solution that would maintain luminance as the color values shift would be to add Hue and Saturation to your Fill effect, set it to Colorize and then animate hue.

HT204150 I linked my outlook express with icloud, not realizing it would change my outlook express contacts. I deleted email addresses from my iphone which in turn deleted them from my PC. Is there any way to get these addresses back?

I linked my outlook express with icloud, not realizing it would change my outlook express contacts. I deleted email addresses from my iphone, not wanting them there which in turn deleted them from my PC. Is there any way to get these addresses back? Seems I no longer have an outlook contacts list.

It's Outlook, not Outlook Express (different program) and if you have now deleted them from iCloud and do not have a backup they are gone.

Outlook Anywhere breaks when changing Internal Auth Method to NTLM

I have an Exchange 2013 environment that I'm migrating to from Exchange 2007, and many of our Outlook clients are still 2007, which means they can't save passwords by default. We have OA published through TMG's for machines on 4 separate domains to
connect into the mail servers, which all reside on one domain. We published this rule with Basic auth, and we've been happy, so we config'ed Exchange 2013 the same way.
Since all clients use OA to connect to Exchange 2013, our Outlook 2007 clients are now being prompted for creds every single time they open outlook. When I try to change the internalclientauthenticationmethod to NTLM, it fixes the cred challenge for
domain members, but it breaks OA even though the externalclientauthenticationmethod is still Basic. The internal and external host names are the same. It's just the auth methods that differ, and both auth methods are set in IISAuthenticationMethods.
Checking an Outlook client's proxy settings show NTLM. If manually switched to Basic, it'll work until Autodiscover switches it back to NTLM. The weird thing is that testconnectivity.microsoft.com tests come back no problem when using autodiscover
and basic. Is Outlook just not smart enough to do that?
I'd attempt to use Negotiate on both, but I've read that's incompatible with Exchange 2007, and I'll users for a while trying to connect to resource mailboxes and public folders on Exchange 2007. Is there a way to get to this to work? If it can't
work this way, why do they even bother having separate auth methods?
Thanks!

Thanks. That's what I was afraid of.
I've seen the article. We want to do preauth for OA, so we'd need to hack at it.
Alternatively, create a separate external host name and ensure the internal host name is not resolvable on the Internet. That will ensure external Outlook users will use the external name and the external auth.
Twitter!:
Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.
Yes. Thanks. That's what I was figuring. The problem with that is that our internal host name is the same external name that provides the entry point for EAS and EWS for a large number of users, so I'd have to rearchitect everything with the
majority of our mobile devices already using that. It's simply not going to happen. I'll have to hack a bit to figure out a way to make it work. I suppose I could use legacywebmail.domain.com, which is a SAN on the cert we use for Exchange
and will now be unused during the migration, as the internal name and make it unresolvable externally. It's just ugly since Outlook clients will see that in proxy settings. I like things neat.
Funny how with the introduction of internal/external hostnames and auth methods, that our Exchange 2007 environment is now setup the same way I'd want our 2013 setup (same hostnames internally and externally resolvable - NTLM internal/Basic external), and
it works fine.

Vendor open items report without page break after changing vendor account

Hi,
I would like to get the vendor open items report without pagination when the vendor account changes.
The option of deleting the * mark in the Filter page is not valid for me, because this way the vendor's name dissappear. I mean, it would be ok if I could show in the output of the report the name of the vendors.
Thanks in advance.

HI,
If I understood your issue correctly then in the report S_ALR_87012085 is a field "Summarization level (0-4)" in the output controls.
You just have to set this field to the value '2'.
When you set the field to two, the page break will first executed, when the page is "full".
If you want to see information about the "Summarization level (0-4)" field, you just have to set the cursor in it, and press F1.
I believe this answer solve your problem.
Please assign points if it useful.
Regards
Ravinagh Boni

INSERT 'PAGE BREAK' AT CHANGE IN EACH TOTAL

Hi...
Does anyone know a way of inserting a page break at each change in a total on a report, so when the report is printed it prints each section (i.e. each time it finds a total) on a separate page.
I also want to print the report title on each page if possible.
The disco. version I am using is 4.1
I would appreciate any help on this. Thanks.

Hi,
A 'total' on a report is based on a group item, e.g. By department, region, category, etc.
Make this group item a 'Page item' and you have a separate page for each group.
Regards,
John

Unable to change profiles on Express

I have both an AirPort Extreme and an Express. I have the Extreme as my base station and my Express configured to join my network to stream AirTunes on my stereo. This setup works fine, but I want to take my Express to my parents' house and use it as a base station there and be able to use my laptop wirelessly. I created two profiles, one for home and one for at my parents. The home profile includes the join existing wireless network option, the parents profile creates a wireless network. I created the profiles while at home, took the Express over to my parents and jacked in to their router. AAU did not recognize the Express. The yellow light just kept blinking. I did a reset on it and went through setting it up using AirPort Setup Utility. Worked fine, profile was still there. Went home and AAU didn't recognize Express again. Hard reset, etc.,etc. I was under the impression that by simply plugging in the Express that AAU would see the Express, I would select it, click configure, and select my profile. It doesn't seem to work like that. I even tried connecting some CAT5 cable between my PowerBook and the ethernet connection on the Express to no avail. How are you supposed to change profiles for different locations?
PowerBook G4, Blue and White G3>4 Mac OS X (10.4.4)

The problem is that client mode on the Express turns
off the access point functionality so that you cannot
connect to it. It's a necessary consequence of a
device that's as versatile as the Airport Express.
Hmm. Unfortunately I guess that makes sense (and would explain why plugging in with an ethernet cable didn't even get me access). So the only way to get around a reset is to change the profile prior to pulling the AX off the network it's a client of? Makes sense, but still seems like an unresolved design problem.
The upside though, if I do a bit of infering from what you've suggested, is that the AX (currently running as Remote) may switch to Client automatically when I get back to my other location. If it does, then at least one pre-emptive switch declaration is eliminated. One could hope.

Pitch change in Logic Express 9

How do you change the pitch of an imported audio file in Logic Express. In Garageband you can use AUpitch. Is there a similar function in Logic Express?

In the fx section of the channel strip, you can actually use the AUpitch as a plugin or Logic's Pitch Shifter. You'll find them under effects>pitch. I prefer AUpitch personally.

Break on change in watch expression

Similar Messages

Maybe you are looking for