INSERT 'PAGE BREAK' AT CHANGE IN EACH TOTAL

Hi...
Does anyone know a way of inserting a page break at each change in a total on a report, so when the report is printed it prints each section (i.e. each time it finds a total) on a separate page.
I also want to print the report title on each page if possible.
The disco. version I am using is 4.1
I would appreciate any help on this. Thanks.

Hi,
A 'total' on a report is based on a group item, e.g. By department, region, category, etc.
Make this group item a 'Page item' and you have a separate page for each group.
Regards,
John

Similar Messages

Pivot Table, "Insert Page Break After Each Item" Setting Only Works for the First Item Change

I have a flattened pivot table generated from Powerpivot and I would like to insert a page break for each change in the row item.
When I use the pivot table Field Settings>Insert Page Break After Each Item, Excel inserts the first page break then returns to normal pagination for the rest of the output.
Is there another setting required to maintain the page breaks after the item change?
Thanks.

We are experiencing the same problem. Did you ever find a solution?

How to insert page break in smartforms?

Hi.
I want to insert page break after printing 15 rows on each page.how to do it. please give me solution

hi Badhe,
 WELCOME TO SDN
 Try with command GO TO NEXT PAGE or &SFSY-PAGEBREAK&
A page break to a new page occurs as soon as the processing of a page is finished and
i. The output control of the main window has not yet been completely processed or
ii. A manual page break was executed in the output control of the main window or
iii. The page does not contain a main window
Regards,
Santosh

How to insert Page Break in SPOOL file

How to insert Page Break in SPOOL file.

How to insert Page Break in SPOOL file.
SET NEWP[AGE] {1|n|NONE}
SET NEWPAGE is not supported in iSQL*Plus
Sets the number of blank lines to be printed from the top of each page to the top
title. A value of zero places a formfeed at the beginning of each page (including
the first page) and clears the screen on most terminals. If you set NEWPAGE to
NONE, SQL*Plus does not print a blank line or formfeed between the report pages.
http://www.lc.leidenuniv.nl/awcourse/oracle/server.920/a90842/ch13.htm
SQL> SET PAGESIZE 5
SQL> SET NEWPAGE 0 --a form feed between your pages
SQL> SPOOL C:\output.doc
SQL> SELECT * FROM emp;
     EMPNO ENAME      JOB             MGR HIREDATE         SAL       COMM     DEPTNO
      7369 SMITH      CLERK           7902 17-DEC-80        800          0         20
      7499 ALLEN      SALESMAN        7698 20-FEB-81       1600        300         30
      7521 WARD       SALESMAN        7698 22-FEB-81       1250        500         30
     EMPNO ENAME      JOB             MGR HIREDATE         SAL       COMM     DEPTNO
      7654 MARTIN     SALESMAN        7698 28-SEP-81       1250       1400         30
      7698 BLAKE      MANAGER         7839 01-MAY-81       2850          0         30
      7782 CLARK      MANAGER         7839 09-JUN-81       2450          0         10
     EMPNO ENAME      JOB             MGR HIREDATE         SAL       COMM     DEPTNO
      7788 SCOTT      ANALYST         7566 09-DEC-82       3000          0         20
      7839 KING       PRESIDENT            17-NOV-81       5000          0         10
      7844 TURNER     SALESMAN        7698 08-SEP-81       1500          0         30
     EMPNO ENAME      JOB             MGR HIREDATE         SAL       COMM     DEPTNO
      7876 ADAMS      CLERK           7788 12-JAN-83       1100          0         20
      7900 JAMES      CLERK           7698 03-DEC-81        950          0         30
      7902 FORD       ANALYST         7566 03-DEC-81       3000          0         20
     EMPNO ENAME      JOB             MGR HIREDATE         SAL       COMM     DEPTNO
      7934 MILLER     CLERK           7782 23-JAN-82       1300          0         10
13 rows selected.
SQL> SPOOL OFFKhurram

Matrix exporting to excel with empty columns, with page break option of "Between each instance of a group" selected.

I am working with Report Builder 3.0 I am using a matrix to produce grouped data on separate worksheets in excel.
The select is:
SELECT ID, Measurement, Value, [Date] FROM Measurements_Report. (please ignore the underscores they are just for formatting)
The contents of the Measurements_Report table:
ID__Measurement__Value__[Date]
1___Hot_________33_____10/1/2014
2___Hot_________44_____10/2/2014
3___Cold_________55_____10/2/2014
The matrix contains a single row group based on the field "measurement". The Measurement group has the page break option of "Between each instance of a group" selected.
There is a column group based on the field "Date".
When this is matrix is exported to excel on the first worksheet (Hot) there are three columns as shown below:
ID__10/1/2014____10/2/2014___10/2/1014
1___33
2_______________44
Notice the last column doesn't have a value.
On the second worksheet (Cold) there are also three columns as shown below:
ID__10/1/2014___10/2/2014___10/2/1014
3__________________________55
This time notice there is only one row and only a value in the last column.
I only want the columns with data for that worksheet to show up. How can I remove these empty/duplicate columns? Hopefully there is a simple fix. Thanks ahead of time.

With the following contents of the Measurements_Report table:
ID__Measurement__Value__[Date]
1___Hot_________33______10/1/2014
2___Hot_________43______10/1/2014
2___Hot_________44______10/2/2014
3___Cold________55______10/2/2014
Returns on the first tab (Hot):
ID__10/1/2014____10/1/2014____10/2/2014
1___33
2_________________43
2______________________________44
In the excel worksheet it contains a separate column for each date with a value. Thanks again!
Why is the same date repeating on multiple columns? Do you've the time part also returned from database?
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

How can you insert "Page Break" in a pdf file so you will specify the pages

How can you insert "Page Break" in a pdf file so you will specify the pages

How / from what was the PDF originally created? It would be easiest to insert page breaks into the original document, then recreate the PDF.

Inserting Page Breaks

I was planning on working on a TV script, and I need to be able to insert page breaks to end the various acts, how does one do this in Story?

Hi Christopher,
You can press "Ctrl + Enter" to add a page break.
Please let us know if you face any problem.
Regards,
Neeraj Gupta

How to insert page breaks, I would like certain rows to print on a new page I am making a childrens dictionary and would like to to automactically print each letter on a new page. is this possible?

How do I insert a page break on certain rows in a Numbers spreadsheet.
I am making and always updating a childrens dictonary and would like to be able to hit print and have each letter start on a new page.
Is this possible?
Thanks

AM,
Set your view to "Print View" and you will see the individual pages. More pages will be added as you drag content away from the existing pages.
Arrange your content as you would like to see it printed. That's it. What you see is what will print.
Jerry

Vendor open items report without page break after changing vendor account

Hi,
I would like to get the vendor open items report without pagination when the vendor account changes.
The option of deleting the * mark in the Filter page is not valid for me, because this way the vendor's name dissappear. I mean, it would be ok if I could show in the output of the report the name of the vendors.
Thanks in advance.

HI,
If I understood your issue correctly then in the report S_ALR_87012085 is a field "Summarization level (0-4)" in the output controls.
You just have to set this field to the value '2'.
When you set the field to two, the page break will first executed, when the page is "full".
If you want to see information about the "Summarization level (0-4)" field, you just have to set the cursor in it, and press F1.
I believe this answer solve your problem.
Please assign points if it useful.
Regards
Ravinagh Boni

Can I insert Page Breaks in Acrobat X?

I've got a 1 page scanned document in Acrobat X Pro. I'd like to split it at a point I choose into a 2 page pdf file. Is that possible in Acrobat?
In say Word, I'd just insert a Page Break. I looked for a Page Break In Acrobat but couldn't find one. I did find Pages > Split Document but that splits on pages or bookmarks, so not really relevant to my problem. I could get the scissors out, cut the original piece of paper, and re-scan as 2 pages. But that isn't ideal for the volume I'll be handling in future.
I'm sure the gurus here will know a neat and efficient way of doing this - or know straightaway that it can't be done - or just point me to something really obvious that was there all along but I missed! Thanks for any input.

You cannot treat Acrobat as a word processor. But you can duplicate a page and crop the bottom on one page and the top of the other. The problem is there will be no reflowing of the rest of the document.

Dynamically insert page breaks (runtime)

Hi,
I have 3 repeating frames within each other in Oracle Reports. In the 1st frame I have Product groups. I want to give the user the option (from Oracle Forms) to have all the product groups without page breaks or each product group on one seperate page.
I only found the "Maximum records per page" property but this can't be set in runtime. I also tried to put a boilerplate on the repeating frame and gave it the property "Page break before". It worked pretty well except on page 2 it repeated the first product group and on page 3 it repeated the second productgroup and so on.
Does anybody have a solution for my problem?
Thanks

I did this long time back.
1. keep repeating frame with field(value null or line) with page break..
2. using Format Trigger show or hide this field.

?for-each-group? dosen't work with page break - rtf template???

Hello all,
When I give a page break inside the for-each-group the group doesn't iterate any code after the page break. I can't give <?split-by-pagebreak?> in this case because I want that loop to be iterated for every department, and should show the report in one column(ms word column), and the department description in two columns.....as this has to happen for every department I can't write separate code........everything should go into one file......
Final file should look like:
<for every department>
<department_report-a table>--one column(ms word column)
<department_description-a huge text>--two columns(ms word columns)
<next department>
how can I achieve this - please help, its urgent.
Thanks for your time.
DK

bipuser thanks for your response
i will have table data also so i cannot keep in the same line.
its strange for the last 2-3 days below syntax gave me space at the beginning of each group now it is working i didnt do any change
<?for-each:G_1?>
ABCDEFDG
<?split-by-page-break:?><?end for-each?>

How to insert a Page Break Programatically ?

Hello,
How to insert a Page Break Programatically ? Please Help..
Regards,
Aanta
Message was edited by:
user526601

Hi Praveen,
Thanks for the reply...
I think <?split-by-page-break?> syntax is used in a loop. In my case i need to check the condition.. if its true i need to insert Page break.
I have requirement Like as follows
- In the Invoice Print Report I need to display “Invoice Appendix” On the Last Page of an Invoice.
- If I am running for multiple Invoices then Invoice Appendix should print on last page of each Invoice.
As I'm using XMLP 5.6.1, i'm unable to use <?start@last-page:body?> syntax. So i'm trying to achive this as i'm explaing below.
Invoice Header
Invoice Lines
end Of Lines
If Invoice_Appendix_flag = 'Yes'
---------------<Page Break>------------------
New Page(Or Last Page)
Start Of Invoice Appendix
End Of Invoice Appendix
End Of Header

Page break within a group(s)

I have a report that uses a group that contains three parts, a details part, a blank lines part, and a totals part.
What I am attempting to achieve, is to produce the report so that there are page breaks within this group. The page breaks should happen after each part.
I have been able to achieve the desired look by adding a group for each part, with an additional 'blank' group to provide a page break between the Details Part and the remaining 2 parts.
This, however has left me with 3 issues;
Throughout the report, there will be pages with only the heading and no details.
There are pages that show 2 headings (one for the ending detail group and the other is for successive detail group)
How to remove the headings for the blank lines part and totals part (which is now on their own separate pages)
The major pain point for me is issue #3. Anyone able to offer suggestions with the amount of information provided?

Hello,
Based on your description, you have three part in one group. You have add page break between each part. You have mentioned that the heading will repeat in each page. You have set the tablix repeat headers on each page, right?
Since you have blank line part in the group, when we add page break between each part, we will get a blank line page. When we have set the heading will repeat in each page, we would also have repeat page header in blank page.
Now, what your requirement is not get the repeat header in the blank page and total page, right? Please refer to the following steps below:
Cancel the headers repeat in each page configuration.
Add a total row before of the detail group. Change these text box values with headers values.
Please refer to the screenshot below:
If there are any misunderstanding, please feel free to let me know.
Regards,
Alisa Tang
If you have any feedback on our support, please click
here.
Alisa Tang
TechNet Community Support

Pages '08 does not import MS Word Page-breaks

Pages '08 imports MS Word 2004 for Mac documents without the page-breaks.
I love the Mac interface and really want to stop using MS software. I was hopeful with all the good press about Pages '08. I downloaded the 30-day trial and immediately discovered this glitch.
I must be able to exchange 300+ page manuscripts with MS Office users. If Pages cannot import the page-breaks in these documents, it's a deal-breaker for me. I'm not going to go through and re-insert 300+ page-breaks everytime I have to edit and return a document.

I've had the same problem as Jeffrey ... but with Appleworks 6 documents. I can import a small amount of Appleworks pages with hard page breaks (Insert Page Break) but when I try to import the entire 300 pages of my manuscript into Pages '08 the page breaks move up and are not where they should be. Also, many of my large Appleworks text manuscript files (no graphics) will not open in Pages '08. On top of that, the line spacing in Pages is a big headache,. I still am unable to place 11 lines on the first page of each Chapter (as I have done before in Appleworks with no problem). Sometimes it will give me 11, next time it will be 12. Hitting return once often moves two lines of type rather than one. Very frustrating. I have followed instructions and even added styles with my own template. I also used "Exact" spacing of 24 pt with my 12pt type because using double spacing is not even close to what double spacing is in Appleworks using the exact same font (Times New Roman, 12pt w/ 24pt spacing.) Any help will be appreciated (before I go back to Appleworks).

INSERT 'PAGE BREAK' AT CHANGE IN EACH TOTAL

Similar Messages

Maybe you are looking for