Break points when matlab is called with system
hi everyone, My v.i calls a matlab script by use of system Exec.vi...this script then calls other matlab files(scripts and functions)..however,when i write keyboard in matlab so as to insert a break point and carry out a step by step analysis of the matlab files,matlab doesn't stop at keyboard ....I would like to know if there's just something am doing wrong and if not,if there are other alternatives for putting break points so as to carry out a step by step debug session..thank you in advance
Hi alpony01,
When you use System exec.vi you call an external application and the related problems are not refer to National instruments software.
However, you can use che MATLAB script structure and paste the Matlab code.
you can find it in Functions palette -> Mathematics -> Script and Formulas -> Script Node -> MATLAB Script
In the links below you can find additional information:
http://zone.ni.com/reference/en-XX/help/371361K-01/gmath/matlab_script_node/
http://digital.ni.com/public.nsf/allkb/93DDF49DA2EFED528625670B005B48E9
http://www.ni.com/white-paper/7671/en/
Similar Messages
-
Where to put break point when debugging the inbound IDOC processing
Hi, Dear Experts,
If IDOC has error and want to debug, which program or function module to put break point when debugging the inbound IDOC processing
Thank you so much!
HelenIt depends on if you have the custom FM or standard FM...Is it MM invoice or FI invoice? ... You can find out your FM by going to partner profile (WE20) for your sender partner and partner function.. Drill down to your partner and the message type and find the inbound process code.. Double clicking on the process code will help you find the FM...
If you don't have access to WE20, You can also put BP into any of the IDOC_INPUT_INVOIC* FM and see if it is getting triggered (assuming your IDOC is standard FM)... -
good day my question is , does anyone of you experiencing when making a call with facetime the phone shuts off and restart
See this veeeeeeeeeery long thread.
https://discussions.apple.com/thread/3404857
It's an issue with hundreds of phones. Some claim it's software related, some hardware, some say it's a mixture of both.
Some people have had temporary success with quitting the Phone.app / restoring as a new phone / restoring from an iCloud backup / disabling Siri / toggling speakerphone on & off...
Unfortunately all of the above only been temporary, with the problem recurring again after a few calls, or a few days etc.
So far the only solution that seems permanent has been to replace the phone. But even so, it's the luck of the draw to recieve a functional phone, and not another faulty one.
I'm completely annoyed as there is no Apple Store near me...... and Apple haven't even acknowledged the issue, despite the above thread being 34 pages long, as of writing. -
6120c delay when answering a call with bluetooth h...
Hi,
I have a Nokia 6120 classic and a Jabra BT2010 headset. When using the headset, every time I answer a call I have a 3 second delay until I can hear anything.
During these 3 seconds I hear 3 beeps: one the moment I answer the phone, a second one a couple of seconds after that, and a third one just before I can start to speak.
Does someone have the same problem? Is this a firmware problem and will be fixed with a new firmware? I have firmware 3.83.that is a bit strange, i have used Nokia BT headset BH-900, BH-201 and BH-600 on the 6120 and there is no delay...
it could be related to your headset... if there is a way to factory re-set that jabra? i had a jabra before, and it can be done if i remeber correctly,when you keep pressing volume up + power on for 10sec and watch the LED change color... -
Would like to mute speakers when on a call with he...
I would like to have my speakers mute automatically when I make or take a call on skype with my headset. And have it unmute when the call ends. Is there a way to do this?
http://community.skype.com/t5/Windows-archive/Skype-calls-disable-speakers/td-p/1421561
-
DEBUG - how can I put a "break-point" when a variable have a certain value
Hi
I need help...
Do you know some kind os instruction or tools to see and stop in debug a program when a variable have a specified value ?
For example:
At debug I want that a program "stop" when likp-vbeln = 70000123000.
Now for do this, I change the code and insert a IF( ), and i put a breakpoint. But i need a way without need change code.
ThanksHi Ricardo,
Use Watch point for this puppose.
Watchpoints allow you the option of monitoring the content of individual variables.
The Debugger stops as soon as the value of the monitored variable arrives.
In addition, conditions can be specified. The Debugger also checks whether such a condition is fulfilled.
Creating a Watchpoint
In the toolbar of the New Debugger, you will find the pushbutton Create Watchpoint . It brings you to the dialog box Create Watchpoint.
Using this function, you can enter the variable to be monitored.
All possible ABAP data structures are allowed here.
Hope this will help.
Regards,
Nitin. -
Illustrator breaks preview when I used it with LaTex
I am having a bizarre problem using Illustrator CS3 on Leopard. Here is the sequence of events:
1. I create a diagram in Illustrator. I save a copy of that diagram as an eps file (or as a pdf).
2. I embed that eps (or pdf) diagram as a figure in a LaTex document and compile it. The code I use is:
\begin{figure}[htp]\centering\includegraphics[height=50mm]{figtiming.eps}\caption{Timing of the model.} \label{fig:timing}\end{figure}
3. All the sudden, every pdf file I open has fonts that are all wrong! It's like somehow this breaks preview's ability to properly decode the fonts of all pdf files.
When I restart the computer, everything is strangely back to normal.
Help!
Many thanks, RyanHi Allen,
Is there any way to store the back up to Mac and restore after formating? -
i have an 5c and whenever I make a call to one particular person, who owns a iphone5, they hear a beeping noise, but they don't have any messages or alerts. I don't hear this noise and I don't have any alerts or messages either. It's extremely frustrating! And I don't want to spend full retail price on a phone that is malfunctioning or to buy one that will do the same thing. Please help
Well, you say that nobody else hears this beep, and neither do you. It is only this one person that hears this beep on their phone. What makes you think the problem is at your end?
-
i kept a break point in a user exit with the statement
BREAK-POINT.
but the control is not stopping there , i am not testing it so didnt give it as user specific . what might be the mistake ? is it not the proper user exit , i have created a project and activated it . i have activated include and all .Hi,
When you start transation in which you have put a break point, start debugging on(\h). add break-point at statement CALL CUSTOMER-FUNCTION.
keep on pressing F7. You may reach to your exit if it come in way of executing you process.
Could you mention for which functionality you have created using user exit, it will more easy to provde help.
Regards,
Amit R. -
Error when IdentityXML is called
Hi all!
I'm working with OAM and trying to call an IdentityXML function to create a new user from outside of product using this API.
I read de documentation (http://download.oracle.com/docs/cd/B28196_01/idmanage.1014/b25346/toc.htm) and I can't put this to work.
When I call the function the only answer is a "No Content Length found" error, I try with a client in java, PLSQL, wget and nettool with the same result in all the cases. The same error is loged on Apache Error Log.
The error is detected even if another function is call or just completely empty the message.
OAM version 10.1.0.4
Linux
Please, I need this working but I can't find a solution, is really urgent.
Line in Apache Access Log
=========================
192.168.3.103 - - [10/Dec/2008:11:25:03 -0600] "POST /identity/oblix/apps/userservcenter/bin/userservcenter.cgi HTTP/1.1" 200 -
Line in Apache Error Log
========================
[Wed Dec 10 11:25:03 2008] [error] [client 192.168.3.103] [ecid: 1228929900:192.168.1.199:7811:0:1584,0] No Content Length found.: /identity/oblix/apps/userservcenter/bin/userservcenter.cgi
XML SOAP Msg
============
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns:oblix="http://www.oblix.com" xmlns:soapenv="http://schemas-xmlsoap.org/soap/envelope/">
<soapenv:Body>
<oblix:authentication type="basic">
<oblix:login>oc4jadmin</oblix:login>
<oblix:password>password</oblix:password>
</oblix:authentication>
<oblix:request application="userservcenter" function="workflowSaveCreateProfile" version="NPWSDL1.0">
<oblix:params>
<oblix:ObWorkflowName>obworkflowid=wfqs20080919T13275417254,obcontainerId=workflowDefinitions,o=Oblix,dc=biosnettcs,dc=
com</oblix:ObWorkflowName>
<oblix:ObDomainName>cn=Users,dc=biosnettcs,dc=com</oblix:ObDomainName>
<oblix:noOfFields>2</oblix:noOfFields>
<oblix:AttributeParams>
<oblix:GenericAttribute>
<oblix:AttrName>cn</oblix:AttrName>
<oblix:AttrOperation>ADD</oblix:AttrOperation>
<oblix:AttrNewValue>melli</oblix:AttrNewValue>
</oblix:GenericAttribute>
<oblix:GenericAttribute>
<oblix:AttrName>sn</oblix:AttrName>
<oblix:AttrOperation>ADD</oblix:AttrOperation>
<oblix:AttrNewValue>melli</oblix:AttrNewValue>
</oblix:GenericAttribute>
<oblix:GenericAttribute>
<oblix:AttrName>uid</oblix:AttrName>
<oblix:AttrOperation>ADD</oblix:AttrOperation>
<oblix:AttrNewValue>melli</oblix:AttrNewValue>
</oblix:GenericAttribute>
<oblix:PasswordAttribute>
<oblix:AttrName>userPassword</oblix:AttrName>
<oblix:AttrOperation>ADD</oblix:AttrOperation>
<oblix:AttrNewValue>melli</oblix:AttrNewValue>
<oblix:AttrConfirmValue>melli</oblix:AttrConfirmValue>
</oblix:PasswordAttribute>
<oblix:ChallengeAttribute>
<oblix:AttrName>genChallengePhrase</oblix:AttrName>
<oblix:AttrOperation>ADD</oblix:AttrOperation>
<oblix:ChallengeValue>
<oblix:AttrNewValue>phrase1</oblix:AttrNewValue>
</oblix:ChallengeValue>
<oblix:ChallengeValue>
<oblix:AttrNewValue>phrase2</oblix:AttrNewValue>
</oblix:ChallengeValue>
<oblix:ChallengeValue>
<oblix:AttrNewValue>phrase3</oblix:AttrNewValue>
</oblix:ChallengeValue>
</oblix:ChallengeAttribute>
<oblix:ResponseAttribute>
<oblix:AttrName>genChallengePhraseResponse</oblix:AttrName>
<oblix:AttrOperation>ADD</oblix:AttrOperation>
<oblix:ResponseValue>
<oblix:AttrNewValue>response1</oblix:AttrNewValue>
<oblix:AttrConfirmValue>response1</oblix:AttrConfirmValue>
</oblix:ResponseValue>
<oblix:ResponseValue>
<oblix:AttrNewValue>response2</oblix:AttrNewValue>
<oblix:AttrConfirmValue>response2</oblix:AttrConfirmValue>
</oblix:ResponseValue>
<oblix:ResponseValue>
<oblix:AttrNewValue>response3</oblix:AttrNewValue>
<oblix:AttrConfirmValue>response3</oblix:AttrConfirmValue>
</oblix:ResponseValue>
</oblix:ResponseAttribute>
</oblix:AttributeParams>
</oblix:params>
</oblix:request>
</soapenv:Body>
</soapenv:Envelope>There is some more data:
The error is raised with any POST request to webservice endpoint:
http://host:port/identity/oblix/apps/userservcenter/bin/userservcenter.cgi
The error is always the same when endpoint is called with a POST (like a webservice!) ... but when is called with GET the User Console Page is returned
Follow in this post paste a request/response example from HTTP point of view, this was taken from a HTTP Tunnel.
The api is well used?? I'm using IdentityXML well??
Thanks for advance.
Complete HTTP Request Example (see that 2 chars are send in message, there is a empty messge!)
=======================
POST /identity/oblix/apps/userservcenter/bin/userservcenter.cgi HTTP/1.1
Host: localhost:7778
Content-Length: 2
Authorization: Basic b3JjbGFkbWluOndlbGNvbWUx
Cookie: ObSSOCookie=loggedoutcontinue; OBBasicAuth=fromDialog;
Complete HTTP Response
==================
Content-type: text/html
<html>
<body bgcolor="#ffffff">
<h1>Error!</h1>
<h3>An error has occurred in the product. Please contact.</h3>
<h3>Oracle technical support directly or send feedback through.</h3>
<h3>http://www.oracle.com/support/contact.html</h3>
<h3>If possible, please include the version number of the software and the error message in your feedback.</h3>
<h3>Error message: No Content Length found.</h3>
</body>
</html> -
IPhone 5 audio issues on calls with a headset
My new iPhone 5 has audio issues when I am calls with my wired apple headset. The caller cuts out like it having low reception. The ends of words and phrases are dropped as well as soft spoken words. Music works great through the headphones. Calls sound great on the handset just not on headset. Tried different headset. Still not working.
Any solutions?
TimThe (same) problem exists when using the original Apple headset, which belongs to iPhone 4S, as well as using the Sennheiser MM30i. The new EarPods are the only ones that seem to work properly.
In addition to that, both headsets work perfectly well, when connected to iPhone 4S.
Eventually, both iPhone 5 itself and SIM card have been exchanged by the provider. Unfortunately the problem still exists. -
Am using Safari 4.1.3 with system 10.4.11 and can only come up with advances preference page when calling up security - thus cannot see cookies. I have Safari 5.0.6 on my MacBook. Will it run on my older machine? Can I transfer older bookmarks to the new software?
Machine Serial Number: W8*********AR
<Personal Information Edited by Host>Safari preferences has no...
-
External break point in sap r/3 system
i want to set external debugging to rfc in r/3
i tried to set it
its getting set
but when i call rfc from external system(webdynpro)
its not gng to that break point i.e its not linking to that break point
what could be the reason
and how we can set external breakpoint
are there any setting we need to do in r/3 so that break points will work
Regards,
VaniHi Vani,
First u have set ur Server to Debug mode...then only u can debug the code...
1. Select "Server0" from J2EE engine (To get this view navigate thru Window--> Show View --> J2EE Engine)
2. Make a right click on "Server0" and choose "Enabling Debugging of Process"
3. Now, Navigate to Run --> Debug --> Select your Project as "Webdynpro Application" and click "new" button
4. Now give some name and Click BROWSE to select ur project and then click APPLY and DEBUG
Or
if u use 2004s, then u can do the settings in Portal itself...which gives u more clear information... follow the link
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0cb32c5-36a7-2910-2c9b-ba4a5bbdbb56">WebDynpro Java Debug Configurator</a>
Hope it helps...
Regards / Guru -
Face time not working. When dialled it says connecting and drops immediately. When my friends calling it show connecting but it does not.
Is there a problem with face time. I am in south Africa, it was working perfectly up to Easter. Please help this is my life line.There is a barely acknowledged issue. For Mac users Apple has released an update to the app, but for iOS users the recommendation is for users to update their ipad to the most recent operating system.
There may be a fix coming for iOS6 users (which seem to be many of those having problems) or there may not be. If your ipad isn't up to date then you can update it and see if that helps, or if you don't want to update then you may want to wait and see if there is either a fix or if it fixes itself. -
We've got 3 new-to-us 2008 xserves that we put into service last week. Installed 10.6, updated up to 10.6.8 and took all of the software updates up until Safari 5.1.4. Computers all work fine. Then take the safari update -- afterwards, SoftwareUpdate crashes a bit after launch, gui or command line. The error when you do it on the command line is "IFJS_PropertyListConvertToType() called with type=3".
Over on the osx snow leopard server discussion board, several other people are reporting that they have the problem but only with the 2008 xserve, the 2009 xserve is just fine. (No reports yet about the 2006 xserve.)
I have reported the bug to apple, and they asked for a crash report, which I gave them. It's bug #11048593 (not sure if those are publicly viewable...)We’re having the same issue on our 2008-era Xserve, but not on our other Snow Leopard servers and clients.
Apple released an Apple Software Installer Update 1.0 release today which may address the problem. See http://support.apple.com/kb/DL1512 Needless to say, you need to install this update manually using the downloaded DMG.
I’ll be installing this update this evening on our systems to see if this resolves our issue.
Maybe you are looking for
-
How to parameter F4IF_INT_TABLE_VALUE_REQUEST?
Hi experts, could u explain, what are the parameters in this function? I tried to parameter the function, but no value found and nothing was displayed. CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST' EXPORTING ddic_structure = '
-
Good morning, I've a callmanager 8.6.2. All works well excepet a vg224 mcgp . The vg is correctly registered via mgcp on callmanager, and I've configured one fxs port to connect to an analogic phone. The problem is: if I start a call from analogic
-
Compressor ProRes 422 (L/T) to FCP
Howdy! I'm taking .mov H.264 files and throwing them into compressor, and on the other end receiving ProRes 422 (L/T) files just perfectly. When I put the ProRes footage into a FCP timeline, I still have to render the audio!! Why is this? I actually
-
Windows 7 64bit Photosmart All-in-one C6380 Solution Center Issue
Finally stumbled on re-installing printer SW so I was able to bring up the Solution Center page after a week of effort. The problem is it errors out after clicking on the scan buttons for either pictures or documents with the following dialog box po
-
Hi all, I am a novice in scripting... Could someone help me writing script for the following.... Assume that there are 5 folders 1 /etl/dev/work/wellness/enrl_rej/records 2 /etl/dev/work/wellness/enrl_rej/metadata 3 /etl/dev/work/wellness/enrl_rej/he