Bring Up Flash Presentation In Multiple formats with hyperlinks?

I have a web site that is 100% flash
http://rcgov.org/firedept
when it comes up as you can see the center section is always the
same starting flash .swf. If you click on the various buttons other
.swf files load in the center section of this page. What I need to
know is can I create a link on another web site that when clicked
will open up my site but with something other than the initial
screen in the center. Can I tell flash from a link to load with
something other than the initial page running?
Bill

You create your own name/value pairs that make sense to you.
I used section as the variable name and page as the value. So if
you have 3 sections (home, contact, portfolio) then you can use
?section=home, ?section=contact or ?section=portfolio. Then in
Flash you use logic to check what section is needed like
if(section = "home"){
gotoAndStop("home");
}else if(section=="contact"){
sorry i suck at explanations but i try

Similar Messages

How do I import music from a flash drive that was formatted with a windows PC to my MacBook?

How do I import music from a flash drive that was formatted with a windows PC to my MacBook - the drive is showing it has over 3GB of info on it but none of the files are showing up in finder? I had backed up my iTunes library on the flash drive about a year and a half ago before I switched from a dell to a MacBook pro.

What I found works for me is to make sure iTunes keeps the music files organzied in the iTunes Media folder according to album, artists, etc. and that it copies the music files there when adding them to the library. That way, if something happens to the library, the raw files can always be re-imported again.

How to generate one report in multiple formats with FOP or BIP?

Hi all,
Is it possible to generate multiple formats of one report in a single "call" using Apache FOP or BI Publisher? (something similar to reports bursting).
Right now I can only select one format at a time.
Thank you,
Ana-Maria

Hi Ana-Maria,
When you enable printing on a report region or add a button to download a report query to your application, then you get a single document download. How would you see this working with "multiple formats"? Given that APEX is a development environment, you can pretty much implement anything you like. The built-in printing capabilities in APEX come with an API that allow for customization of the default functionality, e.g. you can use apex_util.download_print_document to dynamically assign report layouts at rumtime or to use you own XML data sources or XSL-FO style sheets. More relevant to you question though, there's also apex_util.get_print_document. What that allows you to do is to generate report documents inside the database and e.g. store them in database tables or email them out to a list of recipients. You can call this API as often as you like to, requesting any combination of available report formats.
The API function is documented here:
http://download.oracle.com/docs/cd/E10513_01/doc/apirefs.310/e12855/apex_util.htm#CHDDECIA
Regards,
Marc

Flash Drive will not format with Disk Utility

I am in need of help. I have looked through a ton of forums looking for the answer to this but can't find anything. I have a flash drive that I was using and while I was transfering a large file the drive unmounted and now it is showing "Read only". In the Disk Utility, the Erase and Repair are grayed out. When I verify the drive it says this:
Checking file system** /dev/disk1
** Phase 1 - Preparing FAT
** Phase 2 - Checking Directories
/CJB/myfolder/_Reference/AA45608_737_Livery_7b_RtRear_d_RGB.tif has too many clusters allocated (logical=1235222528, physical=1719664640)
Drop superfluous clusters? no
** Phase 3 - Checking for Orphan Clusters
Free space in FSInfo block (1439592) not correct (1379432)
Fix? no
424 files, 11035456 KiB free (1379432 clusters)
Error: This disk needs to be repaired. Click Repair Disk.
I have also tried:
diskutil repairVolume CHAD
I have located the drive in terminal and this is what it says:
drwxrwxrwx@ 1 BDesign staff 8192 Dec 31 1979 CHAD
When I show information in Disk Utility it shows Writable No. Can anyone help me. I don't need the info on my Flash Drive. I just want to format it and get it working again.
Thanks

Some flash drives have a failure mode in which they are irreversibly write-locked by the internal controller when it detects a write error. If the drive doesn't have a write-lock switch (most do not) and you can't erase it in Disk Utility, that's almost certainly what has happened. To be sure, test it with another computer, if possible.

How do i set multiple line with hyperlink in JEditorPane?

hi all,
i have a critical question where i have a JEditorPane component which it display the hyperlink. the problem occur when the display text of the hyperlink if it is too long, i need to truncate it into multiple line like "ABCDEF" to make it "AB<br>CD<BR>F". the hyperlink work only if the display text is not truncate to multiple line, it display nothing at all if i try to truncate them into multiple line.
anyone? thanks and regards

At the point you wish to change to two columns, Insert > Columns and then in the Layout Inspector, select the number of columns. After the insertion point, you will also need to insert another Column Change to return the following paragraphs to single column.
Then Select the text to be bulleted and in the Text Inspector > List tab select the type of bullets.
Note: This creates two columns that flow together. This can be tricky if you add any text later.
If you wish to ensure alignment, create a two column text table and remove the lines with the Graphic Inspector > Lines > No Lines option and insert your text in each column and apply the bullets as above.
This will create a text box - you then need to ensure it moves with the text by electing "Object Moves With Text" in the Wrpa Inspector.
Message was edited by: bwfromspring hill

How to Bring a Flash CS5 Animation into Fireworks CS5

I am using a IMac with OSX 10.6.8. I am attempting to bring a Flash CS5 animation into Fireworks with individual frames
and transparent background. I need some ideas here.
thanks
Paul

Flash documents are not supported by Fireworks.

With IE I have multiple formats such as MP4 that I can use to D/L you tube music videos but with Mozilla it has me load Adobe Flash which I already had and then I can only D/L utiliaing the FLV format - I want multiple options as I have in IE - help?

With IE I have multiple formats such as MP4 that I can use to D/L you tube music videos but with Mozilla it has me load Adobe Flash which I already had and then I can only D/L utiliaing the FLV format - I want multiple options as I have in IE - help?

And what is the point of all this? CS3 is now 7 years old and Office 2003 just the same. Yes, sometimes software has bugs and compatibility issues. Beyond there is nothing here to discuss on either end, given the circumstances...
Mylenium

INSANELY annoying CS4 timeline bug in Flash Presentation format

I've been using the Flash "presentation" format for three versions now, for doing very slide-like but animated training modules. Suddenly in CS4, there's a bug in the timeline where, no matter if the layer is locked or unlocked, frame 10 or 1000, an old file or a brand new CS4 file, the timeline scrubber JUMPS instantly back to frame 0 when you click any frame.
Can you imagine how frustrating it is to be working on a long animation, and you can't even navigate your timeline?? Please tell me there's some fix for this, I couldn't find one.
Screengrab attached. thanks

Hi Ned,
Thank you for verifying this and the suggestion...
The issue with adding the "blank frames" is the flash player slows to about 4 times slower to render out the new frame.
I have decided to place the code directly on the buttons, because I have found that sometimes a button's name will change as well and call on the wrong function....So this is very weird that I can dynamically change a buttons name hardcoded in! I cannot take the risk of the button firing off the wrong function as this could seriously injure someone. This program controls some big machinery.
The issue seems to stem pretty deep into the flash engine and effects all "Objects".
For example:
1. On Frame 1 name all of the objects
2. On Frame 2 rename all of the objects
3.On Frame 3 do not name the objects
On frame 1 gotoAndStop(3)
all of the buttons are named from frame 2 !!!!
So even though I have skipped frame 2 the unnamed objects pick up frame 2's names and label the unnamed objects.
So I would think the player would skip over frame 2...like a hard drive would indexing....but rather the flash player acts like a tape recorder having to seek to a position in the timeline.

Is it possible to maintain multiple payment formats with a single Program

Hi,
Is it possible to maintain multiple payment formats with in a single program.
For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
if its possible could you please tel us where to define the parameters in Setups.
Many thanks,
Zaheer S

nazzu wrote:
Hi,
Is it possible to maintain multiple payment formats with in a single program.
For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
if its possible could you please tel us where to define the parameters in Setups.
Many thanks,
Zaheer SSounds like an Apps question. Start here: https://forums.oracle.com/forums/category.jspa?categoryID=3

Student needing URGENT help with flash presentation...

I am working on a flash presentation with galleries buttons ...basically the full lot. The presentation brief is for a Kiosk - computer in a museum, which when its not being used will go onto a screensaver.
So my question is ...after ive done the screensaver, how to i actually get it into my main presentation? I've looked ALL over the internet for tutorials and found nothing. Any help that anyone can give will be great -
MY HAND IN ON FRIDAY .......
Thanks xDeex

presumably there will be some user input (like a screen touch) that will trigger your presentation's start. you will create a listener for that input and when detected stop/remove your screensaver and start/add your presentation.
typically you would use a timer of some sort to detect a lack of user activity for some minimum duration that would trigger your presentation to stop and the screensaver to be re-started.

Anyone familiar with Flash Presentations?

Hi.
I continue to have problems playing movieclips on certain
slides of a Flash Presentation.
If anyone has *reasonable* experience with Flash
presentations please let me know. You might be familiar with the
problem, or have suggestions.
Thanks in advance,
K

chez Lou,
> 1. Would I be better off just placing everything on the
main
> timeline, and saving the use of mc for animations that
can play
> continously (for instance animations that "accent" the
content
> of the slide, vs those used to put the content
together)?
Well, that would certainly be one approach, but then you
lose out on the
benefit of nested movie clips, not the least of which is
avoidance of
timeline sprawl. I played a bit more with the Slide API this
morning. I
can see what's going on. Under the hood, each slide is a
movie clip, and
they all exist at once, so if you have nested animation on
any slide ...
they all start playing even on slide 1, and might in fact
have played
through by the time you hit slide 5.
> 2. Do you know of a way to have an animation stop on the
last
> frame, yet replay on slide re-entry?
Here's what I came up with. Let's assume you have two
buttons on the
root presentation slide. By default, Flash gives you a root
slide named
"presentation" and a child slide named "slide1". In my
experiment, I added
a Next and Previous button to "presentation" and wired them
up like this:
btnNext.onRelease = function():Void {
this._parent.currentSlide.gotoNextSlide();
btnPrev.onRelease = function():Void {
this._parent.currentSlide.gotoPreviousSlide();
This uses the button event handling approach I prefer,
personally, over
on() and onClipEvent() -- I'm not sure which approach you're
using. In this
approach, the code codes into a keyframe, typically a
dedicated scripts
layer, rather than attached to the object itself. The buttons
have the
instance names btnNext and btnPrev. A function is assigned to
the
Button.onRelease event of each button instance, and the
functions call
either Slide.gotoNextSlide() or Slide.gotoPreviousSlide() as
appropriate.
In order to target the relevant Slide instance, I use the
Slide.currentSlide
property, which I reference via the expression this._parent.
Let me explain that, real quick. In the above code, the word
"this"
refers to the corresponding button instance itself -- in
btnNext's onRelease
handler, "this" refers to btnNext. btnNext -- the button
symbol -- is, by
nature, an instance of the Button class. Consulting the
Button class in the
ActionScript 2.0 Language Reference, I see that all button
instances have a
Button._parent property, which points to the object that
contains the
button. Cool. Therefore, from a button's point of view,
this._parent
refers to the timeline that contains the button. Normally,
such a reference
points to a MovieClip instance (which is what timelines are;
they're movie
clips). That's the case here, too, but thanks to the way
object-oriented
programming works, and because we're inside a Slide
presentation, the parent
movie clip of this button is also an instance of the Slide
class.
Look up "Slide class" in the Components Language Reference,
and you'll
see the full pedigree. Any instance of Slide has the
following family tree:
MovieClip > UIObject > UIComponent > View >
Loader > Screen > Slide. Slides
*are* movie clips, but they're more than that. They're also
UIObjects,
which are objects that contain all the functionality of movie
clips, and
then some. They're also UIComponents, which addes even more
functionality,
and so on ... all the way through Slide. One of the
properties of the Slide
class is Slide.currentSlide. Bingo!
So ... this._parent (in this context) refers to a Slide
instance, which
means this._parent.currentSlide refers to the currently
showing slide, which
is obviously also a Slide instance. For that reason, we can
still invoke
Slide class methods on the reference, which is why something
like
this._parent.currentSlide.gotoNextSlide() works.
Forgive me, by the way, if you already understand all of
this. Forum
replies are searchable, and who knows ... in the future, the
explanation has
the potential to help someone else, too. :)
Okay, so now the issue is, we want each current slide to run
through any
nested movie clips it may have, regardless of their instance
names, and tell
each movie clip to start again from frame 1 of its own
timeline. Amend the
above code to look like this:
import mx.screens.Slide;
btnNext.onRelease = function():Void {
this._parent.currentSlide.gotoNextSlide();
var slide:Slide = this._parent.currentSlide;
for (var prop:String in slide) {
if (typeof(slide[prop] == "movieclip")) {
slide[prop].gotoAndPlay(1);
btnPrev.onRelease = function():Void {
this._parent.currentSlide.gotoPreviousSlide();
var slide:Slide = this._parent.currentSlide;
for (var prop:String in slide) {
if (typeof(slide[prop] == "movieclip")) {
slide[prop].gotoAndPlay(1);
The import statement allows us to reference Slide as a
datatype, which
happens just below the line in each event handler that was
already there.
To save a few keystrokes (basically, to make the code easier
to read), we're
creating a temporary variable, slide, and setting it to the
same
this._parent.currentSlide expression we already used. Once
gotoNextSlide()
or gotoPreviousSlide() is called, the value of
this._parent.currentSlide
changes, because now a *new* slide is the current slide. It's
the new slide
we're interested in. Using the variable slide as a kind of
shorthand, we
use a for..in loop to run through all the properties of the
current slide.
If the datatype of a given propery is a movie clip, we tell
it to go to
frame 1 of its own timeline and start playing.
What I've spelled out may or may not fit, exactly, with your
current
circumstance, but that's why I spent a bit of time explaining
the mechanics
of it. I hope that steers you in a useful direction. :)
David Stiller
Co-author, Foundation Flash CS3 for Designers
http://tinyurl.com/2k29mj
"Luck is the residue of good design."

Format with multiple column

Post Author: vman
CA Forum: General
I am working a report that has had the details section format with multiple columns selected. I want to change the report and remove the check box, but it is grayed out. How can I get the report details section back to default without the detail size constraints?

Post Author: rcoleman
CA Forum: General
Bearing in mind that I'm a relative newbie to the report writing/Crystal world...the only thing I can think of is that maybe the report was written using an older version of Crystal and this option wasn't available. Another possibility, if it's a sub-report, you might try making a copy of the sub-report saving it with the same name, deleting the old sub-report, replacing it with the copy you made. I know that has worked for me when I've had problems with the re-import when opening is greyed out.

Repeat "Detail a" section when using "Format with Multiple Columns" layout

I am using Crystal Reports for .NET (VS 2008) and I would like to get the "Detail a" section to repeat at top of a second column containing additional data in "Detail b" section. Please see below for example, specifically "Detail a (2)". Any tips or help much appreciated.
Detail a (1)_____Detail a (2)
Detail b (1-1)___Detail b (2-3)
Detail b (1-2)___Detail b (2-4)
--Detail b (1-3)___Detail a (3)
Detail a (2)______--Detail b (3-1)
--Detail b (2-1)
--Detail b (2-2)
Thx, Scott

the format with multiple columns i dont believe will show you the value 2x, but allows you to display the values across instead of down.
i think you may want to use a sub report

Format with Multiple columns

Hi Crystal gurus.
I'm having the report which consist of more that 500 rows , so therefore I decided to implement "Format with multiple rows" feature, which is available in Section Expert area. Everything is just fine, I'm getting multiple columns, but how to suppress the header which is not needed for the last page, because the records are only in the first column.
I can easily copy/paste the header as such, but I do not know how to suppress it. Tried to search here, but found nothing.
Many thanks in advance Mcmerphy

If it truely is the last page of the report, you could try a conditional suppression where pagenumber = totalpagecount. But this would always suppress the header selected for suppression, and if you should get another column on the last page, it will still suppress.
Debi

Processing delimited file with multiple format records

Hi All,
I have got file containing following records to be processed by ODI:
1000022,0236,E,APHDQR,,264, 32.83,13-08-2010,13-08-2010,W,33,
1000022,0236,D,APHDQR,,Z01, 47.05,13-08-2010,13-08-2010,W,33,
1000022,0236,M,APHDQR,,159, 3.00,13-08-2010,13-08-2010,W,33,
1000022,0236,A,APHDQR,B120,7140,026,7140, 338.80,106,33,5018676E,
1000022,0236,B, 35.19,1,503,W,13-08-2010,13-08-2010,6 ,COR ,
As you can see there are 5 types of records (Record type 'E','D','M - same format) and ( Record Type 'A' and 'B').
I need to be able to process records with Record Type 'E','D','M' and IGNORE records with record type 'A','B'
I tried placing filter at staging level (CL_RECORD IN ('D','E','M')) in the Interface definition. But it doesn't work and still tries to process records with record type 'A' and 'B'....:(
Any ideas? and any other way I can process records ??
Thanks.
KS

OK,
then you don't have too much options...
the problem is that before apply the filter ODI tries to upload the data into the C$ table and, as there are multiples formats, some columns is getting "wrong datatype" (or some error of this kind).
My question about the initial character was because if they were always the same, you could use a feature from JDBC Driver to file but only works to initial characters.
In your case, it will be necessary to create a temp table with 3 columns like:
Filler1 - Before the record type column
Rec_Type - the record type
Fille2 - the other columns
Filler1 and Filler2 columns should has the necessary lenght to get all data from record.
Now you can filter the record type but will need a "substring" function to separate the embedded into filler1 and filler2.
Make any sense?
Cezar Santos
http://odiexperts.com

Bring Up Flash Presentation In Multiple formats with hyperlinks?

Similar Messages

Maybe you are looking for