How do i set multiple line with hyperlink in JEditorPane?

hi all,
i have a critical question where i have a JEditorPane component which it display the hyperlink. the problem occur when the display text of the hyperlink if it is too long, i need to truncate it into multiple line like "ABCDEF" to make it "AB<br>CD<BR>F". the hyperlink work only if the display text is not truncate to multiple line, it display nothing at all if i try to truncate them into multiple line.
anyone? thanks and regards

At the point you wish to change to two columns, Insert > Columns and then in the Layout Inspector, select the number of columns. After the insertion point, you will also need to insert another Column Change to return the following paragraphs to single column.
Then Select the text to be bulleted and in the Text Inspector > List tab select the type of bullets.
Note: This creates two columns that flow together. This can be tricky if you add any text later.
If you wish to ensure alignment, create a two column text table and remove the lines with the Graphic Inspector > Lines > No Lines option and insert your text in each column and apply the bullets as above.
This will create a text box - you then need to ensure it moves with the text by electing "Object Moves With Text" in the Wrpa Inspector.
Message was edited by: bwfromspring hill

Similar Messages

How do you get a line with MULTIPLE fields to WRAP ?

How do you get a line with MULTIPLE fields to WRAP ?
Good afternoon everyone...
THE PROBLEM: Why doesn’t a line with multiple fields WRAP?
HYPOTHETICAL EXAMPLE/WHAT I”D LIKE TO SEE
If I have 2 fields on a line (this is now a hypothetical example and nothing to do with my actual report)….let’s call them field A and field B. And if field A has values of all ‘X’ and field B has values of all ‘Y’…then….the normal case would be (ignore dots – only for spacing):
A……………………… B
XXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYY
But what if A is too long? I would want to see B wrap onto the next line like this:
A……………………………………………………B
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX YYYYYY
YYYYYYYYYYYYY
And similarly….if B is extra long, can the line print as:
A………………………. B
XXXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYYYYYYY
YYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
I don’t want the case where B is long and I get:
A………………… …B…
XXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYY
………………………..YYYYYYYYYYYYYYYYYYYYY
I can see how you can wrap an individual field like that…but how can you WRAP a line of[b] fields within the frame so it wraps to the BEGINNING of the frame on next line?
My SPECIFIC CASE
I have a report that I have stripped down to a simple structure for the purposes of this explanation.
My DATA MODEL has the main QUERY (for plant family and species data). The columns of the query are divided into 2 groups. The 1st GROUP contains the family data. Below that is the rest of the species data in a 2nd GROUP.
Linking from the 2nd species group (above) is a new QUERY to extract REGION data based on the common key field. Under this 2nd query is another group with all the REGION columns.
The LAYOUT MODEL has a group frame (the main , base one)
On top of this is a repeating frame based on the 1st group (family data).
On top of this is another repeating frame for the 2nd group (species data).
On top of this is 2 Frames on the same line line. The 1st frame contains columns from the species group .
The 2nd frame on this line is a repeating frame. The PRINT DIRECTION for this frame is ACROSS/DOWN. It repeats details of the REGION where the species is found. These columns come from this group come from the REGION QUERY and GROUP.
All fields on the report line have variable horizontal elasticity.
The problem is that when there is too much data on the line, it does NOT WRAP to the 2nd line.. It TRUNCATES.
Can the line be made to WRAP????..
In my current report, 1 of 2 things is happening:
1) All fields print on the line until it hits the page boundary and then it just stops. Truncated!
2) All fields print on the current line, then Oracle Reports throws a new page to print the REMAINDER of the long, input line
But I would like a LONG line to continue printing onto the following line of the same page.
I have tried all combinations of the elasticity fields and the ‘ADVANCED LAYOUT’ properties.
I have been focussing my attention with this problem on the frames .
We are using REPORT BUILDER V 6.0.8.26.0
Thankyou to anyone who may offer assistance.
Tony Calabrese.

Steve,
you gain 1 thing, but you lose something else!
This thing is SO frustrating!
Hey Steve! Good afternoon.
I've done as you suggested....I have a long text boilerplate item - the only 1 on the line...and it has all the column in it.
So it looks like:
&col1 &col2 &col3 &col4 &col5 etc etc etc
And the line expands nicely to each field's requirements.
And when it gets to the right page boundary...it WRAPS to the next line! Beautiful!!!
The only thing is that...when I had individual fields across the line I was able to create format triggers for those fields. And in doing so I was able to reduce the font and change the justification. I had to do that because some of the fields had to appear superscripted.
So I wanted something like (ignore the dots):
...................................ppppp
AAAA BBBB CCCCC DDDD EEEE FFFFFF
So the field of 'ppppp' appeared slightly higher on the line than the other fields...
I can't see how I can do this with a single TEXT field containing all the &COL values.
Have you ever come across anything like this?
Thankyou again,
Tony Calabrese 12/4/2007

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

I have family plan of 5 iphones and all them have the same apple id, the q. is how I can set each one with their own apple id? please advise...

I have family plan of 5 iphones and all them have the same apple id, the q. is how I can set each one with their own apple id? please advise...

See How to Stop Sharing an Apple ID.
(Note that I am affiliated with that site, and some pages contain ads).

I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?

I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?

If I understand you correctly, when you enter a date in the Adjust Date and Time window, the picture does not update with the date you enter. If that is the case then something is wrong with iPhoto or your perhaps your library.
How large a date change are you putting in? iPhoto currently has an issue with date changes beyond about 60 years at a time. If the difference between the current date on the image and the date you are entering is beyond that range that may explain why this is not working.
If that is not the case:
Remove the following to the trash and restart the computer and try again:
Home > Library > Caches > com.apple.iphoto
Home > Library > Preferences > com.apple.iPhoto (There may be more than one. Remove them all.)
---NOTE: to get to the "home > library" hold down option on the keyboard and click on "Go" > "Library" while in the Finder.
Let me know the results.

How can I return multiple values with PL/SQL Web Services

Hi,
I'm new to developping Web Services. I'm doing some tests with JDeveloper and OC4J on my local machine with a Web Services based on a PL/SQL function within a package. Right now that function only returns one value. So the xml response only has one output.
I'd like to know how can I return multiple values with my PL/SQL Web Service. For example, if I want to return an employee's name and id? And that the xml contains two output : <employee>, <empid>?
Reginald
ps : I have searched the forum and I couldn't find an answer to this question, if that has been discussed AND answered before, can you please post the link? Thanks

Alright, I actually found my answer. Since this was asked I think as a followup somewhere else I'll give my answer.
It is very simple, all you have to do is create an Object Type and then Return that object type. After that, JDeveloper will take care of everything and you will have an xml response with multiple values. Here
{color:#ff0000}
create or replace TYPE person AS OBJECT
( id_interv number,
first_name VARCHAR2(50),
last_name VARCHAR2(50),
date_birth date
);{color}
Then your function used in your Web Service should look something like this :
{color:#ff0000}
function info_emp (p_empno IN VARCHAR2) RETURN person AS
l_emp person := person(-1,'','','');
BEGIN
SELECT first_name
,last_name
,emp_no
INTO l_emp.first_name
,l_emp.last_name
,l_emp.emp_no
FROM emp
WHERE upper(emp_no) = upper (emp_no);
{color}
{color:#ff0000}
RETURN l_emp;
EXCEPTION WHEN NO_DATA_FOUND THEN
l_emp := person (-1,'n/a','n/a','n/a');
RETURN l_emp ;
END info_emp;{color}
{color:#ff0000}{color:#000000}After that, this is what the xml response looks like :{color}{color}
<first_name xsi:type="xsd:string">John</first_name>
<last_name xsi:type="xsd:string">Doe</last_name>
<emp_no xsi:type="xsd:string">0250193</emp_no>

How can I copy multiple slides with a HP Scanjet 4050 to photoes using Maverick? HP apparently no longer supports this product for this OS.

How can I copy multiple slides with a HP Scanjet 4050 to photoes using Maverick? HP apparently no longer supports this product for OS Maverick.

VueScan
VueScan FAQ

I have 2 Apple iPads with the same Apple account name. How do I set up one with a different Apple account name?

I have 2 iPads with the same Apple account name. How do I set up one with a different Apple name?

Why is the reason you want a different apple id on them? Need more details to make sure we don't accidently set up the self destruct feature and destory the planet.

How do I share multiple contacts with another iPhone?

How do I share multiple contacts with another iPhone? Thanks in advance.

What do you mean share?
It is not possible to send contacts from one iPhone to another without installing an app that would support this. Bump is one such app.
There is no functionality in iOS to do this. iCloud can share contacts across multiple iDevices, but it would be ALL contacts, just just a few.

How to handle the multiple line items in the Inbound idoc FM

Hi ,
Can any body give me how to handle the multiple line item in the idoc when we reprocessing it from workitem....
Thanks in Advance,,,,
Regards,
Bharani

Hi ,
Can any body give me how to handle the multiple line item in the idoc when we reprocessing it from workitem....
Thanks in Advance,,,,
Regards,
Bharani

How to do the multiple-line String at JList?

hey everyone,
i want to create a JList have to display multiple-line string.
i have use String a="text1"+"\n"+"text2" inside my JList...
the "\n" change to a sequare box...
how cum like that.................??
i need ur kindly helping...

Because the default renderer for a JList element is a
JLabel, and that is how JLabel behaves. The question
"how to do a multiple-line JLabel" has been asked
hundreds of times in this forum, search for that.i have search for it already but i no get it..anything!
so, can u give me the url for me? thank you!

How to go about multiple inclination with different data selection in Delta

We have to copy large amount of data ( more than 42lak of recodes) selectivly from on ODS to other ODS. in delata load ( BW 3.5 enverioment)
I thought of loading data in slices through delta loading with selection condition.
step 1> Do The initialization with selection condition as for calyear =2001 ( Init without data transfer )
step 2> Take the delta load .. it will take all delta record with same selection
step 3> Now I want to do Initialization with selection condition as for calyear =2002
step 4> take the delta now it will take delta for year 2001 and 2002 both Right ?
Here what problem I am facing.. while doing 2nd time initialization it prompt me to delete the last initialization request form scheduler menu.
if i delete the last request .. will it take the delta for previous initialization selection and new initialization selection. ?
Please advice how to go about multiple inclination with different data selection in delta loading.
Looking forward your reply.

Hi,
step 1> Do The initialization with selection condition as for calyear =2001 ( Init without data transfer )
step 2> Take the delta load .. it will take all delta record with same selection
step 3> Now I want to do Initialization with selection condition as for calyear =2002
step 4> take the delta now it will take delta for year 2001 and 2002 both Right ?
You are correct with this scenario normally. The message you mentioned normally comes up when you open a infopackage and don't change the selection first or in case you have overlapping selections with an already done init.
regards
Siggi

Itunes - how do i select multiple line items not in sequence ?

itunes - how do i select multiple line items not in sequence ?

Hold down the Command key and click each in succession.
To extend the selection across items that ARE contiguous, use the Shift key.

How do I search for lines with a particular pattern and delete them when a match occurs

How do I search for lines with a particular patter and delete them when a match occurs? For example delete lines containing SUB_NAME = "?" where ? is any string.

How do I search for lines with a particular patter and delete them when a match occurs? For example delete lines containing SUB_NAME = "?" where ? is any string.
Lines in what? And what language are you using to develop with?
Are the lines in a text file? A RichTextBox? A TextBox? Some other control? A List(Of String)?
Is there some expectation by you that by providing what you wrote in your question post that the knowledge in your mind about what you are thinking about will mysteriously emanate to anybody reading your post so all of the sudden your knowledge will
become their knowledge and they will be able to provide you with an answer as they will suddenly understand what you are trying to do? Because that's probably impossible. Most people try providing enough information in a question so anybody, even stupid people
like me, can understand what they want. Maybe you should try that. As well as selecting an appropriate forum for your question in the future. Usually a question like this is related to programming in a particular language therefore a language forum may be
a good choice. Or not.
La vida loca

How to create a multiple-line TextBox in a jfx script?

How to create a multiple-line TextBox in a jfx script?
Or
How to use the Swing component JTextArea in a jfx script?
Please post a brief code segment.
Thanks,
Asghar

This supports two way binding between JavaFX and Java and also cut and paste.
Enjoy.
* MyTextArea.fx
* Created on Dec 14, 2008, 7:23:49 AM
package twifxer.components;
import java.awt.event.KeyEvent;
import java.awt.event.KeyListener;
import java.awt.Font;
import javafx.ext.swing.SwingComponent;
import javax.swing.JComponent;
import javax.swing.JTextArea;
import java.awt.Color;
* @author Steven Herod
public class TweetTextComponent extends SwingComponent{
     var myComponent: JTextArea;
     public var length: Integer;
     public var readText:String;
     public var text: String on replace{
         myComponent.setText(text);
     public var toolTipText: String on replace{
         myComponent.setToolTipText(toolTipText);
     public override function createJComponent():JComponent{
         translateX = 15;
         translateY = 5;
         var f:Font = new Font("sanserif",Font.PLAIN, 11);
         myComponent = new JTextArea(4, 33);
         myComponent.setOpaque(false);
         myComponent.setFont(f);
         myComponent.setWrapStyleWord(true);
         myComponent.setLineWrap(true);
         myComponent.addKeyListener( KeyListener{
             public override function
             keyPressed(keyEvent:KeyEvent) {
                 if (keyEvent.VK_PASTE == keyEvent.getKeyCode())
                     myComponent.paste();
             public override function
             keyReleased( keyEvent:KeyEvent) {
                 var pos = myComponent.getCaretPosition();
                 text = myComponent.getText();
                 myComponent.setCaretPosition(pos);
             public override function
             keyTyped(keyEvent:KeyEvent) {
                 length = myComponent.getDocument().getLength();
         return myComponent;
}

How do i set multiple line with hyperlink in JEditorPane?

Similar Messages

Maybe you are looking for