Brush just failed to display in CS5

When any of the brush sizes reaches a certain limit the edges failed to display and you can't see the complete circle of the brush. This occurred after I checked to allow Open GL Drawing in the preferences but after I unchecked it the problem persisted. I updated my driver (NVidia GForce 6800) to no avail. The brushes have been displaying fine for the last year with the same driver. Any ideas would be appreciated.

That sounds like an old nVidia display driver bug.
Is there any possibility you took a Windows Update or something that ''updated'' your display driver to an older WHQL version?
Perhaps completely removing the driver and getting the very latest one from nVidia.com might be in order.
-Noel

Similar Messages

  • Camera Raw CS5 fails to Display

    Camera Raw CS5 fails to display when I attempt to open a jpg in Camera Raw or any RAW format file. The Bridge locks up, and when I run the task manager in Windows 7 (64-bit) and force close the Bridge, an icon for Camera Raw shows up in the task manager window and says Camera Raw is Running.
    Thanks for any assistance.
    Bill

    Michi555555 I would recommend reviewing the installation log files for the Camera RAW update which is failing to apply.  You can find details on how to locate and interpret the installation log files at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.  You are welcome to post any specific errors to this discussion.

  • Windows 7 x64 Pro, desktop GUI fails to display correctly, or crashes, when High RAM load, and even after. HW changed, same issue. Please Help.

    Hi Guys,
    I have have this horror issue with my PC. I have even changed the hardware configuration and the problem still persists. My PC fails to display the desktop correctly after using highly RAM intensive applications, especially Chrome, but even after getting
    the chance to close it, or waiting for it to crash by itself, the PC is still not able to display correctly the GUI, even on other browser/applications as shown in the screenshots. 
    1st Hardware Config:
    Intel Core2Quad Q9450
    4x2GB DDR2
    MSI P43 motherboard
    Ati Radeon x550 video card
    Software used, that seemed important for me to mention:
    NOD32 v4.2
    Comodo Firewall 5.12
    Chrome
    Screenshot Captor
    SpeedFan
    Other mentions:
    Aero is disabled, because I've considered that it's one of the causes.
    So, I've considered that it's a RAM issue or a videocard issue, and I've upgraded to:
    Intel Core i7 3770k
    4x8GB DDR3
    Asus P8Z77V-LX motherboard
    Intel GPU integrated in the 3770k CPU
    The problem just happened 2 times on this rig also, and the RAM was not even coming close to  it's maximum capacity of 31.7GB. It was at ~20GB's.
    Also, this is another videocard(Intel's integrated GPU), so we can exclude the videocard from the suspects.
    My suspects:
    1) some desktop manager bugs, or other similar issue
    2)  video memory allocation - I'm still suspecting that it can be caused by the amount of RAM dedicated to the videocard, currently, I think  that it is at 256MB.
    3) some poorly designed components of Chrome/Screenshot Captor - still very questionable since there are enough resources on this system, so there should be no fight over resources. And when the system is barely used there are no issues.
    4) Adobe Shockwave Flash - maybe this one????
    I have attached a set of 20 screenshots here, these were taken on the 1st configuration of my PC, using Q9450:
    http://imgur.com/a/Mc8hI#4
    Notice how it distorts the image by duplicating it and showing it in a smaller space, or how does it displays those black rectangles. In those moments, the PC is fully functional(the apps are running the background), without being slowish or something, but
    you can hardly control it like that. For example, I've tried to remove the mouse from the USB, and then I've insterted it back, the image was not displayed correctly, but the mouse was recognised instantly and the pointer was controlable.
    Same thing still happens on the new configuration. Please advise me.
    LE: OS is Windows 7 x64 SP1 Professional and it's Geniune. There is no cracked software on this PC. No games. I've tried to maintain it as clean as possible.

    Hi,
    First, please be ensured that you have installed the latest drivers and all the updates.
    Then check whether this issue will not in
    Safe Mode. If it didn’t occurred, I suggest you narrow down the cause in
    Clean Boot mode.
    In addition, try to create a new profile to see how it works.
    Hope this helps.
    Vincent Wang
    TechNet Community Support

  • Motion 3, DVD Studio Pro 3, Compressor...fail to display interface

    Macbook Pro C2D, Leopard OS X 10.5.1. All apps were running perfectly before this happened...
    First, all the apps of Final Cut Studio 2 crashed on startup.
    I recall that the last thing I did is trashing the newly installed trail version Aperture.
    After checking the crashing log, I found the problem comes from Prokit.framework. I did a thorough search, the answer is quite clear that the Prokit.framework comes with Aperture 1.5.2 is a PPC version, it replaced the intel version that was in my OS. So the solution is replacing the PPC version back to Prokit for Intel. Finally I found some provided download links of Prokit for Intel. BUT..
    All the Prokit online are extracted with Pacifist from either Tiger OS disc or ProAppRuntime4.0.2.pkg(from apple's website). So they are either version 3.1 or version 4.0.2. After replacing my Prokit.framework with version 4.0.2, all my FCS 2 apps except Final Cut Pro (but Log and Transfer inside FCP 6) stopped crashing but failed to display any interface. But the icons are in the dock.
    So finally I cleaned up all the files related to Final Cut Studio 2 and Prokit.framework and did a fresh reinstallation of FCS 2.
    Same thing! No interface at all.
    At this point, I doubt if the Prokit.framework in Leopard OS disc is different. It's too bad that I'm traveling for a project and my Leopard DVD is not in hand. So I asked a friend using Pacifist to extract Prokit.framework and Browser.framework from his Leopard DVD and sent them over. Now I found that they are indeed different. The one from Leopard is version 4.1. I did a replace again. Now, Motion 3, DVD Studio Pro 3 and Compressor start up, but with black windows and a few images, and the menu bars are really weird. I guess I should install this two framework with Pacifist instead of replacing them with the extracted folders?
    The last resort I guess is to reinstall Leopard? My dilemma if I don't finish my project, I have no access to my OS DVD, but I need to use FCS 2 to finish the project.
    Has anyone run into the same situation? Any enlightenment will be appreciated!

    I have just installed Leopard ans having problems with DDVDSPRO crasshing, can you please expand on how i may install prokit.framework and Browerkit frame work with Pacifist. I am not an expert please bear in mind!!
    many thanks

  • Job log - Failed to display result

    Hello,
    We have a problem displaying job logs, the message 'Failed to display result' appears when we try to display the log.
    The jobs have run last week.
    Any idea where I can have a look to find out what's going wrong?
    Thanks in advance,
    Kind regards,
    Ursula Delort
    SAP Administrator

    In fact, I just found out that we zip the job logs, and I just need to unzip them to be able to access the log.
    Ursula Delort

  • Embedded PDF on web page fails to display

    We have a number of PDFs that are shown embedded in IE (versions vary).  This worked fine with Adobe Reader 9.5 but with 10, PDF fails to display. 
    Page takes a while to report error.  Error:
    There is a problem with Adobe Acrobat/Reader.  If it is running, please exit and try again.  (103:103)
    I found a few other discussion similar to this in the forum but didn't find a definitive root cause. 
    In our situation, we found that if the user launching the web page runs Adobe Reader as standalone first, the error doesn't happen. 
    While workaround exists, I am trying to understand the root cause to see if we can correct this for all the users in automated manner instead of
    mandating launching of Reader standalone as a prerequite step.  Quite a few users using this web app.
    Since launching of Reader standalone works, my guess is that some config/setup is done only after first use.  I see that, for example,
    reg keys are added under HKCU on first use.  I don't know why first use from browser differs from first use from standalone though.  Difference in
    reg access?  Enable/Disable browser plug-in produces different behavior so I don't think the setting is on the browser side.  What other factors
    may be in play here?
    All ideas welcome.  Thanks in advance.

    Got a couple follow up questions.  Postiing the response here.
    1.  Please send us step by step method on how to recreate the problem, and the URL of the PDF file that shows the issue.
    * Write a simple console application that does nothing but starting a browser. Browser URL set to any web site with embedded PDF. I believe I used a sample on Adobe's site for last test.
    2. Is everyone in your company experiencing the same issue?
    * Yes, everyone can be affected.
    3. Does the error show up on any PDF or just the embedded PDF?
    * Only embedded.
    4. Does the problem occur with Firefox?
    * Not browser specific.
    5. Do you have any other version of Reader or Acrobat installed on the same system?
    * No, clean test box. Tested with 10.0.0 first. Failed. Then cleaned up install and installed 10.1.3. Cannot repro with 9.5.
    Root cause appears to be Protected Mode. If I disable that, it works.

  • Flash site fails to display properly in firefox & ie.

    Greetings all,
    site below fails to display properly. When i visit the link
    below using firefox or ie6, i see it fine. but when anyone else
    visits it they see it with defects.
    defects include product text overlapping the fg&m logo,
    ferrioni home designs, inc header is cut off and only part of it
    displays, featured products headers is also cut off and only part
    of it displays.
    http://www.websitemedia.net/playground/ferrioni/sandbox/index.html.
    have tried the following.
    **made sure latest flash player is installed where customer
    fails to see the site display properly.
    **made sure latest ie and firefox browsers are installed
    where customer fails to see the site display properly.
    One important note, we are export flash movie using flash
    vesion 6.
    Need some insight on how to make sure everyone sees the site
    displayed properly.
    Thanks in advance
    BL

    This is just a wild guess but... Be sure that you have
    properly embedded any needed fonts for dynamic or input
    text.

  • Failed opening display

    After been using the "big" distributions for a long time i went for Arch to learn more about using Linux. So far so good.
    Right now i'm using Openbox but want to try out a tiled wm instead, just for fun.
    Made up my mind and chose subtle, since i don't really want to compile every change i made (yet...).
    So i just installed subtle using pacman and made a copy of subtle.rb to home using the instructions in the subtle wiki.
    The problem is when i try starting subtle. I get an error massage saying <ERROR> Failed opening display ´:0.0'
    Been searching the forums and read FAQ's but no answer to be find.

    I have the same problem. No matter if I have a xorg.conf or not. The basic Xorg-xinit environment is working btw..
    Oh my gosh, I feel so stupid.
    I just missed to create a .xintrc.
    It's working.
    Last edited by Janusz11 (2011-06-09 05:23:33)

  • Safari upgrade to 5.0 now fails to display pdf's

    Was working before upgrading to 5.0, now it it appears to download the file but fails to display it in the browser window.
    Any ideas?

    But it seems to be something thats affecting windows users....
    And I'm sure its probably something easy to fix. I just don't understand how Safari works and I don't want to tinker with it too much and destroy it.

  • HT203254 My MacBook Pro 15-inch with NVIDIA GeForce 8600M GT graphics processors just failed. Do you guys know if apple still fixes them?

    My MacBook Pro 15-inch with NVIDIA GeForce 8600M GT graphics processors just failed. Do you guys know if apple still fixes them?

    I tried last week. The best I could get was a discount on the repair, but the damage to my logic board by the GPU caused it to no longer boot. The program ended in December last year, but it has been extended in the past.
    If you have no other damage you might be able to get a flat rate tier 1 repair if you are in the USA.

  • Bug (possibly?): SelectManyShuttle fails to display selected items

    Bug (possibly?): SelectManyShuttle fails to display selected items when valuePassThru="true" in ADF 10g
    Hello all,
    When run, the example below shows a Select Many Shuttle with four choices in the leading list. When items are shuttled to the training list and the page is submitted the trailing list is rendered with no items selected. Is this a bug?
    Configuration
    This example was constructed using jDeveloper 10.1.3.5.0.
    A new application was created using the Web Application [JSF, ADF BC] template although no business components are used.
    Steps to Reproduce
    1. Create the following backing bean class.
    package com.fmcna.adf.test.view;
    import java.util.ArrayList;
    import java.util.List;
    import javax.faces.model.SelectItem;
    public class ShuttleBean {
        public ShuttleBean() {
        private List availableItems;
        private List selectedItems;
        public void setAvailableItems(List availableItems) {
            this.availableItems = availableItems;
        public List getAvailableItems() {
            //populate with a List of SelectItem instances on the inital call to this method
            if(this.availableItems==null) {
                this.availableItems=generateSelectItemsList();
            return availableItems;
        public void setSelectedItems(List selectedItems) {
            this.selectedItems = selectedItems;
        public List getSelectedItems() {
            return selectedItems;
         * Build a List of SelectItem instances to be used by an af:selectManyShuttle
         * @return A List containing SelectItems instances
        private List generateSelectItemsList() {
            List initialItems = new ArrayList();
            initialItems.add(new SelectItem(new Integer(11),"First Choice"));
            initialItems.add(new SelectItem(new Integer(22),"Second Choice"));
            initialItems.add(new SelectItem(new Integer(33),"Third Choice"));
            initialItems.add(new SelectItem(new Integer(44),"Fourth Choice"));
            return initialItems;
    }2. Configure the ShuttleBean class as a session scoped managed bean as in the following faces-config.xml file.
    <?xml version="1.0" encoding="windows-1252"?>
    <!DOCTYPE faces-config PUBLIC
      "-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.1//EN"
      "http://java.sun.com/dtd/web-facesconfig_1_1.dtd">
    <faces-config xmlns="http://java.sun.com/JSF/Configuration">
      <managed-bean>
        <managed-bean-name>ShuttleBean</managed-bean-name>
        <managed-bean-class>com.fmcna.adf.test.view.ShuttleBean</managed-bean-class>
        <managed-bean-scope>session</managed-bean-scope>
      </managed-bean>
      <application>
        <default-render-kit-id>oracle.adf.core</default-render-kit-id>
      </application>
    </faces-config>3. Create a JSP page containing an af:selectManyShuttle with a nested f:selectItems component. Wire the values for these components to the properties in the managed bean.
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
    "http://www.w3.org/TR/html4/loose.dtd">
    <%@ page contentType="text/html;charset=windows-1252"%>
    <%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
    <%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
    <%@ taglib uri="http://xmlns.oracle.com/adf/faces" prefix="af"%>
    <f:view>
      <html>
        <head>
          <meta http-equiv="Content-Type"
                content="text/html; charset=windows-1252"/>
          <title>testShuttle</title>
        </head>
        <body><h:form>
            <af:selectManyShuttle value="#{ShuttleBean.selectedItems}" valuePassThru="true">
                <f:selectItems value="#{ShuttleBean.availableItems}"/>
            </af:selectManyShuttle>
            <af:commandLink text="Postback"/>
        </h:form></body>
      </html>
    </f:view>4. Run the JSP. Validate that the trailing list is initially empty.
    5. Shuttle one or more items to the trailing list and click the Postback button. Validate that when the page refreshes the trailing list is again empty.
    Thanks for any input you might be able to provide.
    Chris Mihalcik
    Edited by: user5384858 on Jun 14, 2010 1:06 PM

    I'm holding my Nano in my hot little hands with ALL of the things you listed, but here's the sad, simple truth: you CAN'T use iTunes to sync everything. It works well for:
    1) Music
    2) Videos (except sometimes in Vista)
    3) Photos (as long as they're not too large)
    but is terrible for:
    1) calendar
    2) contacts
    3) To-Do lists
    For the latter use something like "iGadget" (www.ipodsoft.com). I also edit/store notes w/iGadget plus it allows you to export files, etc.
    I gave up on syncing iTunes w/Outlook long ago. Good luck.

  • On windows 7 machine, safari fails to display web sites

    on windows 7 machine, safari fails to display web sites

    what happens is you type in the url and press enter then nothing.  the fix was to run "netsh winsock reset"
    If the winsock key reset helped things, that usually indicates trouble with a LSP. (That's also consistent with a 'silent" Safari page-load failure.) If you run into the problem again, perhaps try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store

  • Chinese characters failed to display on songs in rip from my own CDs

    My old hard disk was dead and I lost some of the songs that I had on my computer.  So I tried ripping my own CDs into iTune.  Unfortunately, all the Chinese characters failed to display properly.  The songs in my old ipod showed those characters nicely and properly so I do not even have guts to sync my old ipod now. Did some research on the net and it said that I can try convert ID3 tags.  Sadly, the new iTunes no longer provide this function.  Went to apple support site and they need me to buy apple care plan!  I have a ipad still in the warranty period but I am extremely disappointed that iTunes, a software, also needs me to pay for support.  This has cast me shadow of having my 4th apple product.  I am using the latest iTunes version 12.0.1.26.  Help on support of local language is truly appreciated. 

    You wrote "with my last ipod update". Are we talking about syncing your iTunes to the iPod function of your iPhone? Because if not you might be in the wrong forum. If so, then you need to remember that there is no "drag and drop" functionality for transferring your music onto the iPhone. You must first create a playlist within iTunes (I called mine simply iPhone) and then tell the iPhone to sync that playlist to your phone when you connect it to your computer. As you are probably familiar with creating playlists within iTunes you know that you can then drag and drop whatever you'd like into one, including both purchased and imported music.
    Hope that helps.

  • Hi, all of my adobe has just stopped working.. CS5, and adobe acrobat 10

    hi, all of my adobe has just stopped working.. CS5, and adobe acrobat 10
    also, these were bought on line with no disc (god knows why)
    how can I access these from adobe.com

    Hi Dave ,
    Could you please elaborate a bit more about the issue ,what exactly has happened?
    Are you not able to launch and PDF' or getting some error message ?
    You can log in to Adobe.com with your credentials .If you do not have any prior credentials ,you need to create an account .Adobe.com will either let you purchase the product or opt for a trial version.
    Please go ahead if that matches your requirement.
    Regards
    Sukrit Dhingra

  • I have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small, how do i full disconnect my laptop?

    i have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small. like the display down the bottom where al the applications are, is n the middle of the page and not spread down the bottom. this is seriously annoying! all the writing is every small and the tabs are small and its hard to read.  the air display link has disappeared from my computer. but the laptop screen is still very small. i want to know how do i get rid of this and return my macbook screen to its normal size. thank you

    Hello chrispyw,
    If your content is still being displayed incorrectly, I would check the resolution setting for the built in display with this article:
    OS X Yosemite: Adjust your display’s resolution
    If it keeps happening whenever you use AirPlay then I would use this section of the following article to reset the display system:
    Apple computers: Troubleshooting issues with video on internal or external displays
    Reset the system
    You can reset the Mac's parameter RAM and SMC.Reset the resolution
    Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

Maybe you are looking for