BSNL and OTA Updates ..?

What is OTA updates cycle for BSNL ..? Any word on this ..? or We should have to load leaked updates every time ..? I have Q10 

Hello,
Only BSNL can answer your question, for they control it.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • OTA Update failed for Lenovo S856

    I opted to install the OTA Update which is shown to be available. After downlaoding about 75MB of data, the phone gets restarted, the Android OS Upgrading screen comes, and then an error message apears. I only have the option to restart the device. Once restarting, the launcher is loaded and OTA Update Failed to Install message comes. Is there any solution to get rid of this problem? And is Lollipop 5.1 Update coming to Lenovo S856? Thanks in advance.. Any support is welcome! 

    does anybody know what is the correct and current firmware

  • HP Slate 21 Kit Kat OTA Update Fix for Audio Quality and LAN Connectivity

    Recent Over The Air (OTA) update for Slate 21 Update
    Link to thread discussion here, fix listed below -
    ISSUE: 
    A previously applied HP Slate 21 Kit Kat Update (Android 4.4.2) over the air (OTA) update may have caused issues with audio quality or wireless LAN connectivity.
    Audio Quality: Bass response will be poor. Audio will play but bass frequencies will be lacking.
    WiFi Issue: 5 GHz band not functioning properly
    Status: 
    A new update (17r25.1-011-11-WW) has been released over the air (OTA) to end users
    Resolution:
    Apply update 17r25.1-011-11-WW
    If the user was previously on 17r25.1-010-10-WW then a Factory Reset should be performed to complete the resolution.
    I work for HP, supporting the HP Experts who volunteer their time and technical knowledge to help others.

    Pebbles65,
    Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
    English: http://h30434.www3.hp.com
    Spanish: http://h30467.www3.hp.com
    French: http://h30478.www3.hp.com
    Portuguese: http://h30487.www3.hp.com
    German: http://h30492.www3.hp.com
    Korean: http://h30491.www3.hp.com/t5/community/communitypage
    Simplified Chinese: http://h30471.www3.hp.com/t5/community/communitypage
    Cheers,
    KarolB
    I work for HP

  • Periodic sluggishness and Android core force closes since latest OTA update.

    Has anybody else been experiencing this?  The phone was pretty close to perfect up until the latest OTA update last week or so.  Since then it has random periods of sluggishness where the phone essentially freezes up for a while; and worse: at times I'll get some android.process.acore stopped unexpectedly message which usually goes back to a blank HTC logo screen before recovering at the Home screen..
    Nothing else has changed aside from the update.

    Yes my droid is doing the same things as yours.  Mine also is doing crazy things.  I have different  ringtones sent for different people and it still rings with the default ring tone.  This SUCKS!   I love my phone but it is getting on my NERVES!!!!!

  • IOS 5 OTA update server and/or port?

    Does somebody know iOS 5 OTA update server and/or port for iOS updates?

    I had this problem too, you probably have Restictions enabled on your iPhone.
    Go to Settings>General>Restrictions Then Disable Restrictions. This should enable both iCloud and Twitter.
    When you are finished with iCloud you can Enable Restrictions again.
    Good luck
    Adam

  • Getting OTA updates and App store purchases from another country

    Hello,
    I'm thinking of buying a Palm Pre in Germany (where I live at the moment), but I'm moving to Israel in a couple of months.  My cellphone carrier in Israel will probably be Cellcom.  Will it be possible for me to receive these OTA updates? And will I be able to purchase Apps while I'm there?
    Thanks,
    Post relates to: None

    Same question. I moved from the Macau store to the French store. All my apps and music don't appear in 'purchased' in the iTunes Store and the Mac App Store. I guess it's alright for the apps because I can see what I have in my library, but it's a bit more annoying for the Mac App Store. I was planning to buy an iMac and of course connect to the Stores using my apple id, then download all the apps on the new computer but it seems it's not gonna make it.

  • HT4623 HI. i'm on the beta version of iOS 7.1 (beta 3) and  i wanted to get OTA update on my iPad2. after install, i unlocked my device and saw : it may take a few minutes to activate your iPad. after about 5 minutes, it was show an error : we couldn't ac

    HI. i'm on the beta version of iOS 7.1 (beta 3) and  i wanted to get OTA update on my iPad2. after install, i unlocked my device and saw : it may take a few minutes to activate your iPad. after about 5 minutes, it was show an error : we couldn't activate your iPad at this time . please Help me !

    Are you a developer?  If so, post this question in the developer forum.  If not, why are you using a beta version of ios 7?  You need to restore your device as NEW in itunes and update the current software version.

  • Applied OTA update and now phone doesn't work!

    I applied the OTA update offered this morning to my Droid RAZR MAXX.  After the phone rebooted, the screen was blank.
    When I reboot now, I see the Motorola log and then nothing.  I can hear the boot sound, but I can't see anything.
    I tried to reset the phone.  When I select the recovery option, the phone reboots and then shows the little android guy on his back with an exclamation point over him.  I continue on the the next menu and choose the factory reset/wipe data option.  After it successfully completes, I reboot.
    All of this and I still don't have a working phone.
    I took my phone to the local Verizion store and all they could tell me to do was contact Assurion and make an insurance claim.  I have a real problem with this considering it was Verizion's update that caused my phone to quit working.
    Anyone have any ideas?

    Are you attempting the reset through the phone settings or the manual hard reset?
    Through the menu it is settings-privacy-factory data reset-reset phone-erase everything.
    If you are unable to reach the main menu to go into settings you will need to perform the manual hard reset.
    1. Power the phone off.
    2. Press and hold the volume up/down key and then press and hold the power button.
    3.When you see the boot menu release all buttons that you are holding.
    4.Press the volume down key to choose recovery then press the volume up key.
    5. From the droid triage screen press and hold the volume down key, then press and release the volume up key, then release the volume down key.
    6.Choose wipe data/factory reset and then press the power button.
    7.Choose yes to delete all user data and then press power button.
    8.Choose reboot system now and then press the power button.
    If this does not work/already what you have done then it is going to be a device issue that will need to be fixed by either a) calling motorola and seeing if they have a fix for it or b) going into a VZW store and having them update the software/flash the device if they agree to do that.
    If nothing else works, defective device hopefully it's under warranty.
    Good luck.

  • IPad fails to connect to WiFi after OTA update to iOS 6

    After the OTA update to iOS 6 my new iPad fails to connect to my WiFi network at home. My LANCOM router reports the following issue:
    Index: 62294
    Zeit: 19.09.2012 21:08:28
    Interface: WLAN-1
    Ereignis: Rejected Association from WLAN station xx:xx:xx:xx:xx:xx []: ()
    Adresse: xxxxxxxxxxxx
    Grund: Cannot support all requested capabilities in Capability Information field
    It has worked flawlessly in the past with iOS 5 on my new iPad and iPhone 4. At the moment I hestitate to update my iPhone too.
    Anyone with the same issue or an idea how to fix it?
    Thanks in advance, greetings from Stuttgart (Germany),
    Jens

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Lenovo s820 OTA Update error (From S820_ROW_S222_141121 to S820_ROW_S223_150119)

    Hi,
    I also having problem in OTA updation (10.89MB) recently triggered. (I am using Android Kitkat version 4.4.2) while I tried to upgrade the it down loaded properly without any issue.
    Then I pressed upgrade now, then my mobile restarted and shown some upgrading screen....but suddenly a error show n and stopped.
    then I rebooted and pop up says that the OTA upgrade failed!!!.
    Someboday pls. help me to fix this.
    I also did factory default setting.
    Note : Pls. check the error message in attached picture.
    (Installing Update....
    Verifying current system...
    "/system/priv-app/settings.apk" has unexpected contents.
    Update.Zip is not correct
    Installation aborted.)

    I have the same issue with S820_ROW_S222_141121 except my installation halted on "/system/priv-app/ideaFriend.apk"
    Please help.
    The updates kept coming but I could never installed them.
    I have tried OTA as well as from my own PC. Won't WORK!

  • Ios 5.1 OTA update gives error message ( unable to check for update - an error occured while checking for a sofware update ), can anyone help ?

    i am trying to download the latest ios 5.1 but the OTA update gives me a error message ( unable to check for update - an error occured while checking for a sofware update )
    the same thing happens in my ipad too.

    Thank you! I've been trying all day to get this to work! and finally i found the answer!
    amensistech wrote:
    I found a fix for this.
    Go to Wifi    Settings and then select your Wifi Network. Tap the blue arrow to go into Wifi settings and then select the DNS tab.
    Set the DNS to 8.8.8.8 and then go back to the software update page.
    This time it shall work.
    I tried it on an iPad 1 running iOS 5.0.1 but I am sure this shall help.
    Do rate me and reply if it works.

  • Have a lead on the OTA update problems!

    FIRST, THANK YOU! THANK YOU! THANK YOU!... Whoever is responsible for FINALLY giving us our own discussion space!!!!
    I am only going to post this here rather than try to update all the postings regarding the OTA update issues.  I hope people will find their way to it!
    I experienced rapid battery drain, severe overheating & endless boot-looping after the OTA update (among other more minor problems posted in the main Android forum). I had to factory reset and have been trying to determine what the problem might be. I have had discussion with VZW & HTC about this problem.
    After leaving my phone as a stock out of the box phone with the update for a week, I started adding back my Apps. Eventually I had the same problem.  I factory reset my phone and installed each App 1 at a time.
    I discovered that WeatherBug Elite is causing major problems on the HTC Rezound post OTA firmware update. The HTC Rezound has 3 location services - Verizon Location Services, Standalone GPS and Google Location Services.  The default is for only the GPS and Google services to be turned on. If the WeatherBug city is set to Current Location and Verizon Location Services is turned off then the device battery will rapidly drain.  It will also SEVERELY OVERHEAT (130 degrees+) & eventually begin endless boot-looping.  At this point the phone has to be factory reset.
    If Verizon Location Services are turned on then setting the city for Current Location does not cause this problem.  If you turn Verizon Location Services off after the Current Location has been set then it is OK until you change locations and it has to update. Then its back to severely overheating and eventually endless boot-looping.
    This does not happen on the free version of WeatherBug.
    Verizon included a new process - Verizon Location Agent in the OTA update.  This must have something to do with the problem.   All my other Apps that use a Current Location setting do not have this problem.  I suspect that there may be other older Apps with a Current Location setting that might cause this same problem. This has been causing much stress and problems for HTC, Verizon and their customers.  People have been going thru multiple phones thinking that it is a problem with the phone but it continues to happen.  HTC and Verizon have acknowledged that there is some problem with the update and they are now investigating it but really didn't have a lead on what it might be since only some customers were experiencing these problems.
    I spent 14 hours diagnosing and trouble-shooting the problem all last night.  You have to put the phone to sleep & wait long enough for WiFi & the GPRS data to be turned off.  When you wake the phone & wait for 'No Service' on the lock screen to change to 'Verizon Wireless' then it will immediately start the endless uncontrollable boot-looping. It will also happen if you restart the phone.  I have done this on a factory reset phone with the OTA update installing one App at a time and WeatherBug Elite was the only one that caused the problem.  I do not know if this is true for 4G-LTE as I am not in a 4G-LTE area and keep it turned off.
    I wanted to pass along this information I discovered.  I hope I am remembering all the steps. I had it doing it every time. I did more factory resets last night than you could believe.  You need to see the "No Service" on the lock screen when you wake up your phone. This has something to do with it also. I'm so tired now that I can't see straight.  I'll recheck this after I've had a nap.

    Because some people have problems with the updates and some don't, I've often wondered if it had to do with specific apps that some have on their phones and others don't. I never had any problems with my Thunderbolt updates. This one for the Rezound isn't a problem either, but I essentially have the same apps on it that I did on the Bolt. I've never cared for Weatherbug ever since they originally came out on the PC and I got buried in spam. If you haven't tried it yet, you might also try "Weather, Radar, Alerts, Quakes by Elecont software. It's the best weather app I've found and has never given me any problems. I tried BeWeather and didn't like it as well.
    https://market.android.com/details?id=com.Elecont.WeatherClock&feature=search_result#?t=W251bGwsMSwxLDEsImNvbS5FbGVjb250LldlYXRoZXJDbG9jayJdhttp://
    What you're doing by eliminating them one at a time is time consuming, but the best route. There may still be something wrong with the phone itself. I've never had a problem with the boot looping. Also, mine gets up to around 120 to 125 degrees if I'm charging it while using it heavily for streaming videos/movies, but I've never hit the 130's like you have. I did have the led's flash red/green at me at about 125. I also haven't had any of the other problems you seem to be having, so I can't be much help other than to let you know that there are Rezounds that don't have all of those frustrating, headache causing problems.
    I've lost track in your posts, so forgive me for asking the obvious, but have you exchanged it for a CLN replacement(s) and tried new batteries? Are you still using a standard battery, or an extended? The extended batteries don't seem to be having the overheating problems that the standard batteries are, but if you have a bad phone, it may not make much difference.
    Sorry about the problems and frustration

  • N96 OTA Update

    I have an original N96, never been upgraded.  I haven't had any major problems with the phone (quite a few minor ones) and wanted to wait for a few Firmware updates, before I took the plunge and updated.  I just did a OTA check and my phone did download an update.
    I of course intend to make a full backup before running the update, but just wanted to check if anyone else has done an OTA update and whether they lost any information or data off their phone.  Just to give me an idea of the time I will have to spend getting things back to the way they were....
    Cheers
    There are 10 types of people in the world. Those who understand binary and those who don't.
    Solved!
    Go to Solution.

    I have done 3 OTA updates on my N96 and they all worked seamlessly with no loss of data whatsoever.
    However, you should still take all the necessary precautions and do all the backups. We don't want to tempt Murphy's Law.
    OTA is the only way to go and I am sure you will agree once you've tried it.
    Good Luck with the update.

  • Problem with B6000-H OTA update

    Hi, I have a problem with my Lenovo YOGA 8, after an OTA update, it restart but stay still with Lenovo logo. Tryed wipe cache, wipe data factory default but nothing. Someone can help me to find the original rom to try flashing by recovery?
    Thanks!
    Moderator Note; subject edited on this and further posts

    Try this link at your risk:
    http://lenovo-forums.ru/files/file/428-rom-yoga-8-​b6000-a422-000-059-131219-ww-wifi/

  • If you mean you are having trouble activating your iPhone after  updating to iOS 6:  iOS 6.0.1  Generally this is a sign that the iPhone had previously been  hacked/modified/jailbroken and the update relocked it to the  original wireless carrier. If this

    If you mean you are having trouble activating your iPhone after
    updating to iOS 6:
    iOS 6.0.1
    Generally this is a sign that the iPhone had previously been
    hacked/modified/jailbroken and the update relocked it to the
    original wireless carrier. If this is the case, only that wireless
    carrier can unlock your iPhone. You must contact them to see
    if they offer unlocking and if you qualify.
    My phone is from USA and unlocked version and I paid 750 USD.
    Where did you acquire this iPhone?
    USA
    What wireless carrier did you use before this problem?
    I used BSNL - India previously. After I get problem, I used Mobily -Saudi Arabia again I got problem and I am trying to use Airtel - India.
    Does the app Cydia appear on your iPhone?
    What does It mean?
    What does it say when you look at Settings=>General=>About=>Carrier?
    Airtel 13.0

    It would be better for troubleshhoting if you posted back to your original question.... here

Maybe you are looking for

  • Problem refreshing Materialized View in SQL Developer

    I have a database schema with a Materialized View (MV) that updates a products table shown on a website. This schema was recently imported to an 11g database from 8i, but since this import I have been unable to refresh my schema’s Materialized View.

  • Plugin Needed for MIME

    Hi. I am relatively new to Macs, just got my Aluminum model a few days ago. I am having trouble listening to some things on some websites. For example, when I try the radio on this site: http://eradioportal.com/index.php?p=7&type=2&sec=4&aid=200 I ge

  • Deletion of Dimension Table data in Process Chain Step

    Hi, I am trying to delete the InfoCube Contents using a Process Chian.This process is successfully deleting the Fact table contents, but not dimension table contents. I need your help to automate the deletion of dimension table contents. FYI-- We are

  • Obtaining an IOR for RMI-IIOP

    Hi - I'm working to modify a C program (gnuplot) so that it can remotely call functions in Java. My current plan is to use RMI-IIOP on the Java side. I'd like to create a class that implements java.rmi.Remote via some local implementation class, inst

  • How to save cookies in files

    I use add cookies in servlet and then use httpClient.getState().getCookies() to retrieve this cookie. Now I would like to save it in "C:\Documents and Settings\lior\Cookies" folder but since domain name is not the local domain name it is not saved. H