BSOD Critical process died error message

I keep getting the bsod every time I restart my computer It doesn't even get to the logon screen before it restarts. So it loops over over and over again. Please help!

Similar Messages

Lenovo Z50-75 : Critical Process Died

Hi, i bought lenovo z50-75 few months ago. I'm trying to update my computer on 21/07/15 as it suggest to update and restart.But then it stuck during update and blue screen with a sad face appeared.It said that my laptop having CRITICAL PROCESS DIED error.After it collected all the data and restarted,this error keep coming to me and i have no idea what's going on.The blue screen keep coming to me just after a few minutes/seconds i restart my laptop. I tried to go into Safe Mode so that i can run a scan or anything.But this is another problem.I can't launch Safe Mode. For your information,i just bought this laptop on March (if i not mistaken).I didn't expect that i'll facing this severe issue just after few months i bought it,not even half a year!Now i can't even backup my files in my laptop due to this Blue Screen problem! Do you have any solution?Do you provide on-site repair service?

I can't use a restore point because my laptop keep showing blue screen.So i tried refreshing my system and it worked.Now my laptop is ok.Thank you. I still have two questions. First of all, now i refresh my system and it restore to original system.If my laptop suggest to update should i update it or not? Second, my apps gone after i refresh the system.Some of my apps such as Art Rage and Autodesk SketchBook can only download once with license, now the apps gone, how can i redownload it?

Kernal Data Inpage Error, No Bootable Device, Critical Process Died AGAIN! Please help!

I bought this S55-A5295 in July 2013. It started to have problems in April 2014. After 3 months of Critical Process Died, No Bootable Device, and having it shut down multiple times a day, I eventually convince service to take accept it because when I tried to do the recovery, the hard drive was missing partitions needed. (My $30 to ship, despite under warranty)
I received it back late June. The factory replaced the faulty screen (a different problem), but did not replace the hard drive. They supposedly "fixed" it, and added the needed partitions, should I need to do recovery again. I know that the partition was added because when I got it back, instead of being like new out of the box and ready to use, I was locked out because it was set to administrator and there was no option to access it, so I had to use the partitioned info. and do ANOTHER reset after getting it back from them. Not great service all around.
Now the laptop is out of warranty and I've started having problems again.
Sept. 16 -- I had a Kernal Data Inpage Error. The laptop made a horrible sound and shut down. At the time there was a Toshiba Canvio Slim II external drive attached.
Sept. 18 -- EFI\Microsoft\Boot\BCD 0xc00000bb the boot configuration data for your PC is missing or containing errors.
Sept. 19 -- Kernal Data Inpage Error. At this point I had removed the external drive, in case that was the problem. It wasn't letting me remove it earlier in the week. I didn't use it much over the next week.
Sept. 27 -- No Bootable Device.
Sept. 30 -- Kernal Data Inpage Error (volmgrx.sys)
Then Critical Process Died -- 3 different times
Then it restarted itself once without an error code.
Today, Oct. 1, I installed updates from Toshiba, including one fpr HDD and I performed maintenance. I tried to do the hard drive check, but the tabs in the instructions on the computer don't actually exist.
The directions: go to Computer, Properties, Tools tab (can't find it) , so no Error Checking and Check.
However, I did find, under Performance information and Tools my computer's performance rating. The Primary Hard Disk data transfer rate is 5.9.
So far it hasn't shut down today and hopefully the updates have fixed any issues, but I want to be prepared if they don't.
Are these errors coming from my laptop's hard drive? Is there a way for me to actually check that? Are the errors somehow connected to my TOSHIBA external drive? I haven't connected the external drive since the errors started happening, but i will need to use it again at some point, I just wanted to make sure the laptop was okay first.
Also, I am still running Windows 8. That's what they reset it to at the factory, and last time the issues seemed to correspond to me upgrading to 8.1, so I am wary to end up with a $600 paper weight again.
Please advise. Thanks!!

..went through the whole reset. ... ..do ANOTHER reset after getting it back from them
What can I say? The gold-standard test for a software problem is to restore the hard disk to its original out-of-the-box contents.
I'm a Windows specialist. Can't troubleshoot hardware.
-Jerry

Windows 8.1 Blue Screen of Death "Critical process died" after Windows update

Hey there, my Envy laptop has the "Critical Process Died" blue screen of death error after doing 3 things today:
1. A BIOS update through HP Support Assistant.
2. An x64 windows process update (optional) through the Control Panel.
3. An NVIDIA update.
What can I do to fix this error? I'm okay with a complete system wipe. Please help.
*Windows 8.1 64bit

The only option that worked for me was to "reset" my PC, as in a complete wipe. it's working properly again, when I read reviews of windows 8.1 I didn't really believe the people who said stay away from it, but since I've had more problems than I'd wish to, I'm too afraid to go back to it. Thanks anyways guys.

S540 critical process died

Hy,
I have upgraded my S540 to Windows 8.1. I installed all drivers and updates and have now sometimes bluescreens with the message "critical process died". I know this is not much information but I have no idea how to examne or solve the problem.

Hola pasoprohibido que tal,
Que estuviste realizando ante del mensaje?, puede ser relacionado al Windows update, en teoría el mensaje guarda relación con que algún proceso para que arranque Windows no este andando como debe.
Pues esta medio complicado la situación si te dice que la unidad que contiene Windows esta bloqueada, puedes intentar algo con la unidad de la memoria USB que comentas puedes ingresar al CMD y escribir sfc /scannow
Otra opción radical es una nueva instalación, digo radical porque implicaria eliminar todo lo que tengas en la unidad que contenia a Windows (unidad C del disco duro por lo general), no comentas que modelo tienes, podría asumir que tenias Windows 8 pre-instalado pero no encuentro por ahora con información oficial sobre alguna descarga de una imagen para una posible instalación de cero (instalación limpia), lo que si te podría servir es esta información, funcional si tenias un ordenador con Windows 8 pre-instalado.
Un saludo.
@Antony_Vamu
Comunidad en Español English Community Deutsche Community РусскоязычноеСообщество
Mis Lenovo: Y560p,Z580,Z500 touch,S920,T400,G50-70 ,Soy voluntario no trabajo para Lenovo, las opiniones expresadas por mi no representan a Lenovo, no se responde a preguntas de manera privada debes crear un nuevo tema, números del centro de llamada Lenovo Aquí , reglas de participación del foro Aquí , si encontraste solución a tu problema marcarlo aceptándolo como solucionado!!!!!

A720 critical process died HELP!!

Hi, I have a problem with my lenovo A720 and it is an upgrade to windows 8 from windows 7 pro. Now, the computer won't even turn on because of the BSOD of windows 8, the critical process died. It just keep restarting when it reaches the windows 8 logo, the blue login. The only menu i can open is the Lenovo BIOS setup utility and it doesn't even help. I can't seem to find any system recovery option. Please Help !!

hi kevingo,
Welcome to the Lenovo Community.
It looks like something went wrong when you upgraded the machine from Windows 7 PRO to Windows 8. If you have created a backup of your files, you can try to:
1. Run One Key Recovery by repeatedly tapping the F2 key during boot-up. This will guide you through in restoring Windows 7 back to the machine then you can perform the Windows 8 upgrade again.
2. Clean install Windows 8 into the machine (refer to this guide)
Hope this helps.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

"CRITICAL PROCESS DIED" and "FINGERPRINT READER IS NOT CONNECTED.

the two issues are as follows;When I try to use my fingerprint reader (after upgrading to win 10) I get the message that the "FINGERPRINT READER IS NOT CONNECTED". How does one get it to connect? When I try to reinstall any software that requires a (RE-START OR BOOT) with HP Recovery Manager, it gives me the new blue screen that says, CRITICAL PROCESS DIED. Please assist. Jon

It is possible to work-around the issue, but some manual steps are needed:
1. delete "smihlp.sys" from "c:\program files\thinkvantage fingerprint software"
2. run "services.msc" and stop the service "Windows Biometric Service"
3. delete the file "031D23AD-15AF-4e25-B7B3-DE34893097ED.DAT" from "c:\Windows\system32\WinBioDatabase"
4. reboot the computer (important!!)
5. now try to enroll some fingers
This should make it possible to enroll fingerprint and use it to log into Windows, until the bug can be fixed in some future version of BIOS and/or Fingerprint software.

Critical process died

I have a custom built hp envy sleekbook. It froze in the middle of playing saints row 2 about a week after a new windows update to 8.1. I have never had my laptop freeze to a point that restarting couldn't fix it. It keeps saying critical process died and gives me a list of solutions that don't work, then restarts and does it all over. I have a windows 8 guidebook that tells me to run a recovery disk, but my laptop doesn't have a disk drive. I don't want to reformat my laptop, but don't know what else to do.

Hi
What is the critical process that your machine reports ????
Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

User exit - stop processing with error message displayed

Hi guys,
My scenario is like this
Whil doing migo for the same batch number more than 3 times i should not allow to post the document.
I have the material number and batch number in a seperate ztable
for checking this found out there is an exit.
Enhacmenet - MBCF0002
EXIT_SAPMM07M_001
I have written code in the above exit as
select count(*) from ztable
    into t_charg
     where matnr eq i_mseg-matnr
    and charg eq i_mseg-charg.
if t_charg gt 3.
call function 'POPUP_DISPLAY_MESSAGE'
    exporting
      titel = 'Error Message'
      msgid = 'BD'
      msgty = 'E'
      msgno = '899'
      msgv1 = 'Batch Already Received 3 Times'.
if sy-ucomm = 'OKAY'.
elseif sy-ucomm = 'RW'.
else.
endif.
endif.
The program works fine and gives a pop up message and when i post the document
it still gets posted.
I should not allow to post the document
Help me on this issue?
Regards
Senthil

thanx for the reply
Ihave created a message class z001 and maintained a message(001)
but when i am trying to activate it says
Field "Z001" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement . . . . . . . . . .
whether i need to include anything in the program for message class
senthil

Handling Error Messages in Process Chain

Hi Gurus,
I am developing a process chain which contains more than 40 Master Data Objects. Those are connected serially with "always" link.
Start -> Load Data -> DTP -> Load Data -> DTP -
EX-OR (connected to all Processes for error message)
Here the EX-OR Process is not allowing me to connect with "Error" link to all processes (by default it is giving "Always" link). i.e i want to get the error message from EX-OR process only in the case of failure not always.
Can any one help me out.
Thanks in advance,
Chenna.

Greetings Chenna,
First we need to check why the "always" link is used to connect the process chain steps?
If you take such "always" link to connect the steps, we cannot raise an error message link to EXOR( by default it will also take "always" link)
Here we can explore an error message thru EXOR step whenever a failure occurs in the process.
Things we need to do:
1. Steps in the process chain should be connected only on "successful" option selected.
2. We need to link the required steps to the EXOR step with "errors" selected on the pop up.
3. Need to link an Error message to EXOR step by selecting "Create message" on EXOR step.
Now if any failure occurs in the process the error message will be raised.
this helps...

Error message-Stop processing

Hi all,
I did some code like when invalid combinations....then need to raise a request,at that time it showing the error message, but after that error message...when press enter....that work order starts genrating(means start processing).So i need to stop the processing after error message displays even click on enter or save...need to show the same error message.Could u plz help me on this.
Plz check the code below:
IF VIQMEL-QMART = ZCL_CONSTANTS=>C_QMART_M1.
         IF VIQMEL-PRIOK = ZCL_CONSTANTS=>C_PRIOK_1 OR
            VIQMEL-PRIOK = ZCL_CONSTANTS=>C_PRIOK_2.
               IF RIWO00-AUART <> ZCL_CONSTANTS=>C_AUART_PM03.
                  MESSAGE e208(ZPM).
               ENDIF.
         ELSEIF RIWO00-AUART = ZCL_CONSTANTS=>C_AUART_PM03.
                MESSAGE e208(ZPM).
         ENDIF.
      ENDIF.

hi..
i think you are using module screen then you will have to use stop after the error message and clear the sy-ucomm or ok_code before stop statement.
MESSAGE e208(ZPM).
clear ok_code.
stop.
but if it were a report then also it depends on ur code.
in report if your code contains an end-of-selection and u are throwing an error message in start-of-selection , then below error message statement if you write stop then end-of-selection still will get executed ..
but if you write an EXIt then end-of-selection wont get executed. it will show directly output screen if there is an write statement to display on screen in start-of-selction.
and if you are throwing an error message at selection screen then no need to use any of the above.
but if you are using an information message then u need to use stop after the i message..
hope this will help u

HELP! iPhone 4 is BLANK after trying to update to iOS 6, error message during restore...

I tried to submit question to Apple Support, but I have to enter my phone's serial number and it doesn't work! From what I can gather, it wasn't restored, so I can't get the serial #!!!
When I connected to iTunes earlier this evening, a window popped up about updating iOS. (I had to update thru iTunes b/c I've never updated iOS!)
I chose "download & update". After ~2 hours of downloading software, it began doing some different things, soon after it started the restore process, an error message popped up. The first suggestion was to download the newest version of iTunes, which I did, next-restart laptop, opened iTunes, and iPhone doesn't show as a device, and choices like "sync" are gray (can't choose them).
By looking through and reading other questions and answers in the community, I think I've found the backups stored on my computer.
I just can't get anything to work. proc
I love my phone, please, please help!
In pretty easy to understand terms. (please no talk of clouds, etc. )
I didn't do any backups myself prior to starting b/c it clearly said all of those things would be backed up and restored during the process.
thank you!

when I started the update I was at the end of the preparing to download phase and now my screen is just flashing on and off with apple logo

Error Message (2131) When trying to burn a CD

I need help? When I go to burn a CD from my playlist and it is time to put the CD into the driver, It go threw the process of reading the cd and then it go to the download process an error message comes up An Unkown Error (2131) Does anyone know what this means, and how to fix the problem?? HELP

I had the same problem with Dell Vostro 1000. My problem was with TSScorp DVD+RW TS-L632H drive. I applied new firmware that lilmaqi posted the link to and it worked. Make sure you follow the instruction on how to apply the firmware fix.
http://support.us.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&relea seid=R173097&formatcnt=1&libid=0&fileid=235346

Do we see an Error Message at the Spreadsheet Level?

My Interface is a Table - PA_TRANSACTION_INTERFACE_ALL
I am using Oracle Standard Importer to pick data from PA_TRANSACTION_INTERFACE_ALL and load to PA base tables. I have defined Error setups as below. My expectation is, if there is any validation failure during the Importer process, the Error Message will be Displayed to the User at the Spreadsheet level itself (Experts, request to correct my understanding here)
Error Row Definition -
SELECT * FROM PA_TRANSACTION_INTERFACE_ALL WHERE TRANSACTION_STATUS_CODE = 'R' AND BATCH_NAME = $param$.BATCH_NAME
The value for the Batch Name is got from Source - IMPORT and Value - PA_TRANSACTION_INTERFACE_ALL.BATCH_NAME
Error Message Setup
SELECT MEANING FROM FND_LOOKUP_VALUES WHERE LOOKUP_CODE = $param$.TRANSACTION_REJECTION_CODE
The value for the Transaction Rejection code is got from the Source - INTERFACE and Value - PA_TRANSACTION_INTERFACE_ALL.TRANSACTION_REJECTION_CODE
My setups seems to be correct in all respects. Now, i perform the testing as follows -
I uploaded a data which would fail validations during Import. My expectation is - The Error Message (specific to the validation) should be displayed to the User. But it does not happen. Instead it shows the standard message (like no of rows uploaded successfully)
Is there some configuration missing. Some valuable input required. we have already applied patch Patch 9790225: Oracle Web Applications Desktop Integrator 12.1.3 Release Update Patchset 1
Regards
Pradeep

It looks like your data is corrupted. Take a look to this articles and try to reset the information in your account: [[Replace your Sync information]]

Can anybody help with this error message

I work with CS5.6 on RAW pictures shot with a Canon EOS 5 Mk II and have problems saving. Mycomputer is 32-bit with 4 Gb RAM, Windows 7.
Die Error Message in Adobe CS5.6 ist: „ could not complete the SAVE AS command because there is not enough memory (RAM)”

Its saying exactly what it means you do not have enough memory to save the file. You can either change the properties to save a smaller image
Or update your computer. In order to use the entire 4GB of RAM your computer needs to be 64bit not 32. 32bit can only access 2GB of ram and some apps can access an additional GB of ram. But if you do upgrade your computer get 6 or 8 GB of Ram, you will be happy you did.

BSOD Critical process died error message

Similar Messages

Maybe you are looking for