BSP Iview error message : Access denied

Hi All,
We are using E-rec 600 via the standard BSPs (REQ_MNT_LST) in ECC 6.0.
The application runs fine in the browser without any problem.
I started creating BSP iview in Portal for this application. The Url is mentioned below :
http://hostname.companyname.com:8000/sap(bD1lbiZjPTIzNSZkPW1pbg==)/bc/bsp/sap/hrrcf_start_int/application.do?BspClient=235&BspLanguage=EN&rcfLogAppl=REQ_MNT_LST
I have given the BSP iview properties for this application as follows :
Application Namespace : rcfLogAppl=REQ_MNT_LST
BSP Application : hrrcf_start_int
Start page : application.do
The application starts fine in Portal via BSP iview. But, however when I click on any of the drops in the application. In the status bar, it show the message : Access denied.
I tried in other browsers also. Same problem persists. I am sure that the roles at backend and permissions in Portal are set properly.
Please shade some light where I missed the steps. awaiting for your valuable inputs. thanks for your time, point assured.
Kind Regards,
Anil Kumar.

portal being on https and abap server on http is not the issue here.
the access denied error is a javascript error which will happen if the javascripts in the application tries to access js functions/dom elements from other frames or from other pages which are from different domains.
this requires the domain to be relaxed and when supports portal integration flag is checked the system automatically generates code which handles domain relaxation. with this check box checked you should not be having problem.
However i had the same problem even after setting portal integration flag. and my bsp application strucutre was on index.htm page and within that i had 4 frames. then i had to manually set the document.domain in index page which helped me to solve the access denied error.
Regards
Raja

Similar Messages

I'm trying to open a PDF file but keep getting error message "Access denied." Help.

Every time I try to open a PDF attached to an email I get the error message "Access denied." How do I fix this?

Actually my son directed me to a help site run by a guy named Brian Stevenson. Here is what I did --
1. Launch Adobe Acrobat Reader XI
2. Go to Edit>Preferences
3. Click on Security (Enhanced)
4. Uncheck "Enable Protected Mode at startup"
5. Click Yes when dialog box open to remind closing of application
6. Click OK to save
7. Exit Adobe Reader
Worked like a charm!!

Group Managed Service Accounts Error Message access denied

Hi I am playing around with group managed service accounts in my lab using a 2012 R2 DC on a 2012 r2 forest and domain Level .Net 3.5 installed.
I am following this tutorial
http://blogs.technet.com/b/askpfeplat/archive/2012/12/17/windows-server-2012-group-managed-service-accounts.aspx
1. I installed the keys
2. I waited for 10 hours
3. I created the GMSA
4. I tried to install the GMSA on the DC logged in as the Domain admin under a administrative powershell prompt
5. I got the nasty error: access denied message.

the powershell statement could be wrong...
-PrincipalsAllowedToRetrieveManagedPassword

Keep getting error message access denied then already a project with that

name saved.
I don't understand why this is happening now, I have done this stuff many times before and NOW I am getting this message over and over! I am trying to start a new project and I keep getting that message. (it also says there is already a project using that name that I am trying to save it as. I have tried rebooting and shutting down FCE to no avail. I can't render anything because I guess I am NOT allowed access to my own project. Does anyone know how to resolve this? I have an external drive that my scratch settings are set to. They are still there and the message is STILL bouncing up.
Thanks in advance
ruez

The other error message reads "there is already a project with that name", when I try to save it. Then it saves it as a copy, then the next time it is saved as a copy copy. I don't get it! I am doing just what I have always done and now this?
When you say 'drives' what are you referring to exactly? How would I trash my preferences? Where would I check permission on my drives?
Thanks Tom, as I am sitting here that little FCE icon is flashing me already to tell me Autosave: A file of this name already exists. When I click ok, Autosave comes back with access denied.
Thanks for all your help!!
ruez

Getting Error Message "Access Denied" and "Unable to Execute!

Using jmf-2_1_1e-windows-i586.exe on Windows XP. When I open the executable it prompts me if I want to overwrite the existing files. If I do yes, then I get "Access Denied". If I do no, then I get "Unable to Execute!
"C:\DOCUME~1\HP_ADM~1\LOCALSS~1\Temp\pft1~tmp\SETUP.EXE" /SMS
Unable to execute the command line"
What am I doing wrong?

Sounds like you don`t have write permissions for that directory. Not a java problem.
regards

Error Message access denied when trying to install on SD Card

Hi,
I got this errormessage whan I'm trying to install the image about CMD (run as Admin):
C:\FFUTEST>dism.exe /Apply-Image /ImageFile:flash.ffu /ApplyDrive:\\.\PhysicalDr
ive1 /SkipPlatformCheck
Access is denied.
Does anybody know a solution?

Are you able to see the SD card in file explorer? When you performed the diskpart command sequence:
diskpart
list disk
exit
Did your SD card show up as physicaldrive1?
Is the SD card either 8 or 16 GB in size and Class 10?
Also, are you running this command on a Windows 10 install?
You might check that explorer or cmd don't have a reference to the SD card still. If a program is accessing the card that might prevent DISM from accessing it in exclusive mode.
Jonathan Tanner | Microsoft | Windows 10 IoT Core Insider Preview Support | This posting is provided 'as is' with no warranties and confers no rights.

Parser Error Message: Access is denied: 'Oracle.DataAccess'.

Has anyone else encountered this issue at all?
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Access is denied: 'Oracle.DataAccess'.
Source Error:
Line 197: <add assembly="System.EnterpriseServices, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
Line 198: <add assembly="System.Web.Mobile, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
Line 199: <add assembly="*" />
Line 200: </assemblies>
Line 201: </compilation>
Source File: c:\windows\microsoft.net\framework\v1.1.4322\Config\machine.config    Line: 199
Assembly Load Trace: The following information can be helpful to determine why the assembly 'Oracle.DataAccess' could not be loaded.
=== Pre-bind state information ===
LOG: DisplayName = Oracle.DataAccess
(Partial)
LOG: Appbase = file:///C:/inetpub/wwwroot/MobilityMachine
LOG: Initial PrivatePath = bin
Calling assembly : (Unknown).
===
LOG: Policy not being applied to reference at this time (private, custom, partial, or location-based assembly bind).
LOG: Post-policy reference: Oracle.DataAccess
LOG: Attempting download of new URL file:///C:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary ASP.NET Files/mobilitymachine/44efa7b9/c87ec767/Oracle.DataAccess.DLL.
LOG: Attempting download of new URL file:///C:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary ASP.NET Files/mobilitymachine/44efa7b9/c87ec767/Oracle.DataAccess/Oracle.DataAccess.DLL.
LOG: Attempting download of new URL file:///C:/inetpub/wwwroot/MobilityMachine/bin/Oracle.DataAccess.DLL.
LOG: Publisher policy file is found at C:\WINDOWS\assembly\GAC\policy.9.2.Oracle.DataAccess\9.2.0.401__89b483f429c47342\Policy.9.2.Oracle.DataAccess.config.
LOG: No redirect found in host configuration file (C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\aspnet.config).
LOG: Using machine configuration file from C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\config\machine.config.
LOG: Post-policy reference: Oracle.DataAccess, Version=9.2.0.401, Culture=neutral, PublicKeyToken=89b483f429c47342

Yes on both of your questions. This is why I am confused as to why this is happening and the really strange this it happens maybe 2 times out of 10 (give or take).

Connecting to remote server failed with the following error message : Access is denied. For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentV

I installed Exchange Server 2010 inside my VMWare Windows Server 2008 Ent R2. And After successful installation when I try to open my Exchange Server Console, I am getting the following error message. I am very new to Exchange server please help me
to solve this problem.
Initialization Failed
The following error occurred while searching for the on-premises Exchange server:
[win-.local] Connecting to remote server failed with the following error message : Access is denied. For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError
$true -CurrentVersion 'Version 14.1 (Build 218.15)''.
Thanks Vivek
SharePoint Foundation 2010 Book
http://www.redpipit.com

Hi,
Please have a look at the article below:
Troubleshooting Exchange 2010 Management Tools startup issues
http://blogs.technet.com/b/exchange/archive/2010/02/04/3409289.aspx
Resolving WinRM errors and Exchange 2010 Management tools startup failures
http://blogs.technet.com/b/exchange/archive/2010/12/07/3411644.aspx
Besides, please run the cmdlet below:
set-user alias -remotepowershellenabled$true
Xiu Zhang
TechNet Community Support

Jsp error Message: Access is denied. on customers IE7 and IE8

Hello,
Here is a thing:
Customer getting js error in IE7 and IE8. Firefox works fine.
I am not able to reproduce on internal machine with ie8. also internally all works in ie9 (also in browsing modes ie7, ie8). and of course firefox works great internally as well.
Error happens when they navigate back to caller page from popup page (SelectPG) by selecting not partial action. When they click on the commandImageLink popupPage get blanked (get white with no any information on it) and stays and IE showing yellow exlamation mark in the bottom left corner with error:
Message: Access is denied.
Line: 1
Char: 53
Code: 0
URI: http://cusomer_host:7001/product/faces/selectFlow/SelectPG?_adf.ctrl-state=1paop64rm_38
SelectPG is inside bounded taskflow which is ran as dialog from caller taskflow.Popup page SelectPG opens fiine and all information is displayed correctly, they can see table with all information do filtering on table etc...
i dont have access to customer enviroment. and i am not able to reproduce this on any of our internal enviroments.
kind of stuck here will appreciate any thoughts/hints/suggestions.
thanks in advance!

and it seems that to reproduce this - you can run any of your application which have taskflow's <inline-popup> with this kind of link:
a href="http://weblogic:7101/yourproduce/faces/yourPage.jspx" target="_blank">go to your application </A
for some reason target="_blank" makes popup not to be closed throwing the Access is denied error.
Do you know if there is any patch for this? (updating jdev version is not the option)
Edited by: user1175340 on Oct 4, 2012 8:03 AM

Error message - access is denied

HI
I'm trying to publish a new page (from a copying an existing one) and the message "access denied . file may not exist or there may be a permission problem" comes up. I'm using contribute 6.5.
Any suggestions?
Victoria

Hello There ,
Welcome to Adobe Forums .
Please check that whether you are the admintrator or publisher of your website or not.
Go to Edit > My connection and check the role assigned to you .
If you are not the Administrator or publisher then ask your website admin to change the role asssigned to you.
Please see the screenshot .
Hope this helps!
Thanks and Regards
Himanshu Satija

Web-UI error message "Access via 'NULL' object reference not possible"

I need some help, I'm not a Basis person but I need to get this connection problem resolve.
This problem is in our DEV ICWeb system. After logging in to Web-UI, I got a error message "Access via 'NULL' object reference not possible". We have 3 clients (100, 220, & 310) in DEV and all 3 clients are giving me the same error message.
From the help.sap.com, I found this topic http://help.sap.com/saphelp_nwes70/helpdata/en/84/43f0d786304e19a652a8f80909a8ec/content.htm
but in the document it asked to go to SM59 to check the ESH_APPL_WS_TEMPLATEENGINE destination. But we don't have that destination setup in all our systems.
Here is the complete error message:
Error when processing your request
What has happened?
The URL http://crm-dev.staff.copa:8000/sap/bc/bsp/sap/crm_ui_frame/BSPWDApplication.do was not called due to an error.
Note
■The following error text was processed in the system CD1 : Access via 'NULL' object reference not possible.
■The error occurred on the application server CRM-DEV_CD1_00 and in the work process 0 .
■The termination type was: RABAX_STATE
■The ABAP call stack was:
Method: GET_DATA_LOSS_HANDLER of program CL_CRM_UI_CORE_APPL_CONTROLLERCP
Method: GET_DATA_LOSS_HANDLER of program CL_CRM_UI_CORE_APPL_CONTROLLERCP
Method: EH_TRIGGER_NAVIGATION of program CL_CRM_UI_CORE_APPL_CONTROLLERCP
Method: SET_WORKAREA_CONTENT of program CL_CRM_UI_CORE_APPL_CONTROLLERCP
Method: PROCESS_NAV_QUEUE of program CL_BSP_WD_VIEW_MANAGER========CP
Method: DO_INIT of program CL_CRM_UI_FRAME_APP_CONTROLLERCP
Method: DO_INIT of program CL_BSP_CTRL_ADAPTER===========CP
Method: GET_PAGE_CONTEXT_CURRENT of program CL_BSP_CONTEXT================CP
Method: ON_REQUEST_ENTER of program CL_BSP_RUNTIME================CP
Method: ON_REQUEST of program CL_BSP_RUNTIME================CP
What can I do?
■If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system CD1 in transaction ST22.
■If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server CRM-DEV_CD1_00 in transaction SM21.

Hi Michael,
Refer to the link below and check the procedure.
http://help.sap.com/saphelp_nwes70/helpdata/en/84/43f0d786304e19a652a8f80909a8ec/content.htm
Regards,
Arjun

Getting error-"Process Access denied" while invoking Process as web service

Hi,
I have a very simple Business Process, just to take some input & give some String as output. I published this BP as web service on Oracle BPM - Process Administrator. I got its WSDL also. I can invoke startSession operation. But when I invoke the operation that is exposed by BP as web service, I am getting an error - "Process Access denied".
Please help to solve the issue, as I need it urgently.
Thanks,
Sujata

Hi Ariel,
Thanks for reply and sorry for delay on updating status. Actually our process server was having a problem, so I could not check the same in last 4 days. Now coming to the point....
I changed Process web service by changing authentication type as "Usernname token profile". I have not checked "Required HTTP Basic Authentication". As you said, WSDL got changed, it has removed startSession(). But when I invoke my actual operation, I am supposed to send authentication data (user name & password) in header.
I tried to send correct authentication info in header. But still I am getting an exception.
soapenv:Server.generalException - WSDoAllReceiver: Request does not contain required Security header
I feel header might be going wrong. I have taken header format from web service guide. I am attaching the entire request message taht I am sending, please tell me where I am going wrong...
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:sim="http://bea.com/albpm/Sample/SimpProc">
<soapenv:Header>
<wsse:Security soapenv:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wsswssecurity-secext-1.0.xsd">
<wsu:Timestamp xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsu:Created> 2010-06-01T19:23:29.774Z </wsu:Created>
<wsu:Expires> 2010-07-02T15:02:29.774Z </wsu:Expires>
</wsu:Timestamp>
<wsse:UsernameToken>
<wsse:Username>bpr_user</wsse:Username>
<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wssusername-token-profile-1.0#PasswordText">bpruser12</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
</soapenv:Header>
<soapenv:Body>
<sim:sayHello>
<argInput>ss</argInput>
</sim:sayHello>
</soapenv:Body>
</soapenv:Envelope>
I cehcked with & without wsu:Timestamp. But same.....
Please give your suggestion.
Thanks
Sujata

Message: "Access denied cannot connect"

Running Network Magic (5.5.9118.2-Pure0) on Windows XP SP3 (2 machines) and Vista SP1 (1 machine). Receive the message "Access denied cannot connect" when trying to print to one of two printers hardwired to the Vista machine from one of the XP machines (laptop). The Vista machine can print to the other XP machine (desktop) and the laptop can also print to this machine. I deleted the printers from the laptop, set the printer sharing off on the Vista machine, reshared the printers and I still receive the error message. File sharing across all three machines is working fine.
Solved!
Go to Solution.

Hi, is your network type set to public in Network and Sharing Center? Also make sure that File and Printer Sharing, Public Folder Sharing and Network Discovery are enabled.
My Cisco Network Magic Configuration:
Router: D-Link WBR-2310 A1 FW:1.04, connected to Comcast High Speed Internet
Desktop, iMac: NM is on the Windows Partition, using Boot camp to access Windows, Windows 7 Pro 32-bit RTM, Broadcom Wireless N Card, McAfee Personal Firewall 2009,
Mac Partition of the iMac is using Mac OS X 10.6.1 Snow Leopard
Laptop: Windows XP Pro SP3, Intel PRO/Wireless 2200BG, McAfee Personal Firewall 2008
Please note that though I am a beta tester for Network Magic, I am not a employee of Linksys/Cisco and am volunteering my time here to help other NM users.

Error while trying to backup - Microsoft.SqlServer.SmoExtended, Error 5 (access denied)

Hey guy,
I have a problem with my SQL Express Server.
If I try to backup a database I'm getting the following error:
(Microsoft.SqlServer.SmoExtended)
System.Data.SqlClient.SqlError: Das Sicherungsmedium 'D:\my-database.bak' kann nicht geöffnet werden. Betriebssystemfehler 5(Access denied). (Microsoft.SqlServer.Smo)
I have done this a month ago and it worked.
Can someone help me please?
I am logged in as sa, the OS is Windows Server 2012 Essentials.
Thanks
Regards,
Alex

'D:\my-database.bak' kann nicht geöffnet werden. Betriebssystemfehler 5(Access denied). (Microsoft.SqlServer.Smo)
Hi,
Since error is access denied it means SQL server service account ,the account with which SQL Server service is running, does not have read/write privilege on folder where you are taking backup. It does not matters whether you login with SA.
Now I see you are backing database to root(D:) drive. This should not be practiced its a bad practice and has lots of drawbacks. Instead create a folder BACKUP in D rive and give SQL Server service account read write privileges on that folder and start backup
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles

Error Msg. I am receiving an error message: "Access to "DDRC-Computer Class" in "Birthdays" in account "iCloud" is not permitted. The server responded: "403" to operation CalDAVWriteEntityQueueableOperation. Revert to server /Go offline.

I am receiving an error message:
"Access to “DDRC-Computer Class” in “Birthdays” in account “iCloud” is not permitted.
The server responded:
“403” to operation CalDAVWriteEntityQueueableOperation.
Revert to server /Go offline.
When I click revert to server the screen goes back to the same error message. When I click go off line the error message disappears, but none of my calendar appts. sync with my other devices.

We previously had a similar issue when migrating multiple accounts from MobileMe to iCloud. The issue was resolved by disabling and then enabling iCal sync through iCloud on our iMacs in System Preferences.
Always backup your calendar before troubleshooting (File > Export > iCal Archive).
The following steps are roughly from a Apple Support Community discussion.
Open iCloud in System Preferences.
Switch off (uncheck) iCal sync in iCloud System Preferences pane.
Backup iCal before doing this. You will need to remove calendar data.
Open iCal and verify the iCloud account is removed in the iCal preferences under accounts.
Close iCal, reopen System Preference and switch on (check) iCal sync in iCloud System Preferences pane.
Reopen iCal and verify the iCloud account is enabled in the iCal preferences under accounts.
At this point if the problem persists you might try completely signing out of iCloud and then signing back in. But remember to backup all related data (iCal, Contacts, Mail, Photostream, etc) before turning off iCloud sync!

BSP Iview error message : Access denied

Similar Messages

Maybe you are looking for