BT Home Hub 3 Device Blocking

Hi, I use this routers access control options to limit the kids Internet on their phones at night. It would be useful if there was an option to temporarily block a device altogether (without having to manually remove the WiFi key from the device). I'm wondering if I could use the Port Forwarding options as a workaround to accomplish the same thing? or some other way?
Any help would be appreciated. Thanks.
Andrew.

There is no way to do that on the home hub 3. You would have to use a different router that allows selective access control via a web interface.
You could do in on the old HH1, by altering the firewall settings to exclude an IP address.
You could of course, keep changing the access settings, but that would be a lot of bother.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

  • Home Hub 4 Device Tables - who to believe

    I have a printer connected as a static...
    If I look at the printer on HH4 (in device table click on device name) it says
     - static IP
     - Currently Connected
    If I look at the DHCP tables it says
     - Lease time 20:20:58:58 (static IPs should not be leased!)
    If I look at the device table is says
     - Not connected
    If I enter the ip address or device name to a browser the printer responds, if I print, it responds, so it clearly is there ...

    Are you saying that there is a different way to assign static IPs? The approach I have taken is the netgear type I have worked with for years, basically telling the DHCP to avoid certain IP addresses (in Netgear-land this is set as a minimum IP number from the pool that may be assigned)
    I couldn't see a way of doing port forwarding without using this approach as StaticIP devices do not appear in the device list so cannt be assigned to port forwarding/DMZ/firewall rules

  • Home hub 3 keeps disconnecting ethernet device

    I have a home hub 3 and a iomega home media network hard drive which is connected via one of the ethernet ports on the home hub. On my old Home hub the device connected fine however on my new home hub 3 it connected at first for a day and then disconnected and will not connect again. I menetioned this to the infinity engineer who surgetested I could have one of the older Hubs or it had faulty ethernet ports. I have tryed chaning the ethernet port, but when I look at the advanced settings of the hub and look at connected devices it reports not connected for the Iomega drive. How do I log a fault call to get a replacement hub, or can I force a firmware update. mine has version V100R001C01B031SP09_L_B.
    Please tell me how I can log this online so I do not have to ring India again!
    Yours
    Andrew

    No problem about the delay in replying, as you put my name in the text of you message, I got an automatic alert
    Yes, the problem with the Ethernet ports is in this thread.
    http://community.bt.com/t5/BB-Speed-Connection-Issues/HomeHub-3-LAN-speeds-only-10Mb/m-p/238589/high...
    The long term answer would be to connect your own Ethernet switch to the GigE port, and not to use the other ports.
    I am not sure if the HH3 issue will be solved, as I suspect its a hardware design issue.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Can I connect more than one device to home hub?

    I am a new user and have my PC connected to my home hub and all works well.
    My husband has just got an ANDROID and we want to connect as well. I thought I was doing it ok and entered the security key but all I get is authenticating and not much else and it does not connect. Have I missed something do I have to put anything else in other than the security key?
    It connects ok to the external BTwifi and BT Wifi with Fon but of course we are not supposed to do that.
    Sue

    it may be a problem with your Android (whatever model) as any home hub or WiFi router should take loads of other devices I am not sure there is a limit but I have 8 connected.
    If you have anyone else that has a tablet or phone that you can get them to test to see if the problem is with the hub or your android device.
    The only other thing I can suggest is that if it is a home hub 4 which also uses 5Ghz as well as 2.4Ghz some people have had problems with 5Ghz and if you can see both from your device selecting the 2.4Ghz may help.

  • Home Hub 3 - losing connection to certain devices

    Hi, I've just upgraded to Infinity to try to improve the poor download speeds and regular loss of broadband I was getting on the old BT copper wire service.  This included an upgrade from the Home Hub 2 to the Home Hub 3.  Early results on the speed are good - typically download speeds are up to 25mb and upload has improved to around 8mb (from less than 3.5mb and 650kbs).  However, I'm now experiencing WiFi connection problems with some of my devices.
    I have a range of computers, games consoles, iPod touches and iPads connected wirelessly to the router.  Some, like my Lenovo X201 and my son's X-box, have connected and remain connected.  Others, like my sons' iPod touches, the iPad, and our Dell Netbook seem to freeze.  One moment you are surfing the Internet, then you click on a link or try to search, or select a new page and the browser suggests it's trying to go to that page, but nothing happens.  The only way to unfreeze it is to disconnect and reconnect, or to renew the lease.  On the iPad this can occur every two-to-three minutes, which is a very irritating way to surf!  There are similar issues with viewing video content from iPlayer, etc.
    Does anyone have any ideas on how to resolve this before I resort to call the BT 'helpline'?  (Yes, helpline is in quotes: I have a long relationship born of many years of broadband - or lack of it, more accurately...)

    Hi snbjap and rounhead27, welcome to the forums
    Ok, I too have a hub3 and have also seen this lately, though my hub has had many settings changed, so they're no longer at default settings.
    The event log on the hub manager doesn't show this drop, which is odd as it normally does.
    There are some things you can try:
    a) change the wireless interface type from the default of b/g/n to just b/g
    b) set each device to be issued with the same IP Address via the hub(time consuming for multiple devices)
    or
    c) set each device with a static IP Address and manually configure the settings to connect to the hub and thus the www (This so far, appears to have cured my Wii dropping)
    Having said all that, and because I've already done the above, which has worked for me till the recent drop via wifi, I'll flag a forum mods to see if there is currently a known issue.
    -+-No longer a forum member-+-

  • Devices Disconnecting From Home Hub 5

    Had this problem ever since changeing to the home hub 5 / infinity a couple of weeks ago.
    Devices such as my laptop and the sky wireless adapter (for getting on demand etc) keep disconnecting from the home hub and i keep having to reconnect them. Its really annoying, the sky wireless adapter disconnect every couple of days and i have to re enter the wireless key.
    Can anyone help?
    Thanks

    Did you turn of smart setup. http://bt.custhelp.com/app/answers/detail/a_id/44328/~/switching-smart-setup-on-and-off-on-the-bt-ho...
    Did you split the networks. http://bt.custhelp.com/app/answers/detail/a_id/44798/related/1
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Devices Missing from Home Hub 2 List

     I have seen many entries on various forums about people connecting device and not seeing them on the network list.
    I had this problem and went through all the suggestions and finally did a reset to factory defaults. This cured the problem temporarily but it returned the following day.
    After lots of analysis it seems that the HH2 can only display 10 devices at any one time, so when I added the 11th device to my network – it does not seem to matter weather its wireless or not, it is not in the list – delete an existing entry and refresh and the new device appears.
    Is this normal behaviour or is my HH2 faulty?

    marcelaj1 wrote:
    I know they are connected as I first noticed the issue when the P.C. I was logged onto interface with was not in the list.
    From what you are saying this is normal for these things.
    Its much the same on the home hub 1. Sometimes devices do not show as connected, even though they exist in the main device list. I get the impression that the web display only updates if the device has been active for a while.
    There is nothing in the firmware to trigger anything, when a device status changes.
    If I log into the telnet interface on the HH1, and use the command "hostmgr list", the device is shown on the list.
    Telnet is not available on the HH2.
    I would not rely too much on the device list. If you really want to see if a device is present, then simply "ping" it.
    I actually use static addresses on my network, as it makes it easier to detect if a device is active.
    See Static IP with Home Hub
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Block users from Home Hub 3 wi-fi without them kno...

    Is there any way on the homehub 3 to block users on the wifi without it giving them a notification?
    When you use the parental lock down between certain times when the user opens a web page it says they've been locked down by the hub but I don't want them to get this notification just to be completly disconnected?

    Neogeo wrote:
    Is there any way on the homehub 3 to block users on the wifi without it giving them a notification?
    When you use the parental lock down between certain times when the user opens a web page it says they've been locked down by the hub but I don't want them to get this notification just to be completly disconnected?
    No, you cannot do that with the home hub 3.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • BT Home Hub Port Forwarding, Device Not Listed

    Hi Guys,
    It's quite a simple one really but it has me totally stumped. I've been trying to open a couple of ports recently, for games etc and I know how all this port forwarding stuff works, but recently I had hard drive issues and had to re-install windows etc, all the usual **bleep**. Since then though, when trying to forward a port in the hub manager (I have BT Home Hub 2), my device doesn't appear in the drop down list, neither the physical hexadecimal address nor the name I assigned to the machine! My Xbox, Iphone and my dads laptops are all on the list... just not the machine I'm using right now, even though its wired up by ethernet cable and I'm using the hub for the internet to get onto this website right now! -.-
    Any help is appreciated!

    Anonymoose wrote:
    Hi Guys,
    It's quite a simple one really but it has me totally stumped. I've been trying to open a couple of ports recently, for games etc and I know how all this port forwarding stuff works, but recently I had hard drive issues and had to re-install windows etc, all the usual **bleep**. Since then though, when trying to forward a port in the hub manager (I have BT Home Hub 2), my device doesn't appear in the drop down list, neither the physical hexadecimal address nor the name I assigned to the machine! My Xbox, Iphone and my dads laptops are all on the list... just not the machine I'm using right now, even though its wired up by ethernet cable and I'm using the hub for the internet to get onto this website right now! -.-
    Any help is appreciated!
    Hi Anonymoose and welcome
    Try power cycling the hub (turn it off and on) with your device connected and see if it then appears on the list.
    -+-No longer a forum member-+-

  • TS1398 Since upgrading to ios6, all apple devices (new ipad, 2 iphone4 & itouch) are having difficulty reconnecting to the home hub wifi network. I.e, every time the lock screen comes on, the wifi connection is lost when you reopen the device. It's an ios

    Since upgrading to ios6, all the family's apple devices (new ipad, 2 iphone4 & itouch) are having difficulty reconnecting to the home hub wifi network. I.e, every time the lock screen comes on, the wifi connection is lost when you reopen the device and we have to reconnect through settings. This appears to be an ios6 software issue.
    Is there a solution to this wifi connection issue or do we wait for a software fix?
    I'd hate to think Apple is going down the Microsoft path, of passing untested software onto the user. What ever happened to Regression Testing, to ensure the existing functionality remains intact?
    I bought into the Apple dream, because it was intuitive, reliable & enjoyable to use, all the things that Microsoft windows isn't.
    Other issues we are experiencing are, Games are stuttering and the kids really miss the old YouTube app.
    Please Mr Browett, sort these issues out.

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet
    http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
    ~~~~~~~~~~~~~~~~
    YouTube is not now part of iOS 6.
    However, you can go to the App Store and do a search using YouTube. You can download several YouTube apps: YouTube (for the iPhone, a IPad app is in work), several users  like Jasmine and YouPlayer.
     Cheers, Tom

  • SIP Registration is blocked by BT or Home Hub

    Hi all,
    I have a problem, between 7.02PM and 11.02PM my SIP Softphone looses registration - every night. I have isolated the issue to my BT Infinity connection as when I close my WIFI and use 3G the SIP telephone registers sucessfully.
    I 'think' it's either my Home Hub 3 or BT themselves blocking SIP Registration
    Anyone seen this before?
    Regards
    Matt

    Is your SIP telephone connected by a cable, or does it use WiFi?
    If it uses WiFi, then you may be getting wireless interference, and you would need to select a different wireless channel.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • CRC errors with non-home hub device

    Hey folks
    When I first replaced my dying BT Home Hub with a third party DSL modem, there were initially a lot of CRC errors and poor SNR ratios. I called BT Broadband support and the agent appeared to rectify the problem on by undertaking actions on BT's side. It was something like performing two line tests back-to-back -- I know sounds odd, but it worked and the the third party DSL modem worked happily for 6 months.
    This week the third party modem started reporting high numbers of CRC errors, much like when first connected, it works for a while then resets when the CRC error count overflows. I'm wondering if there is some other state on BT's side that could rectify the problem. I've spoke with two agents this week, and they had no idea what I was talking about (and I agree it sounds like voodoo).
    Any ideas on what the initial action was on BT's side that enabled the modem to work in the first place?
    Thanks
    Solved!
    Go to Solution.

    Hi John
    I didn't understand the question about the test socket (physical socket?).
    The line passes the quiet line test.
    The third party router shows:
            Downstream    
    Upstream
    SNR Margin
    0.1
    6.2
    db
    Line Attenuation
    53.5
    27.0
    db
    Data Rate
    5705
    1023
    Kbps
    Max Rate
    22116
    1036
    Kbps
    POWER
    0.0
    12.3
    dbm
    CRC
    5786
    0
    The CRC errors accumulate until they hit a threshold and the device resets dropping the connection.
    The Home hub shows:
    ADSL settings
    VPI/VCI    0/38
    Type    PPPoA
    Modulation    ITU-T G.992.5
    Latency type    Interleaved
    Noise margin (Down/Up)    2.8 dB / 5.3 dB
    Line attenuation (Down/Up)    49.5 dB / 26.1 dB
    Output power (Down/Up)    0.0 dBm / 12.9 dBm
    The obvious difference is 3dB in line attenuation and noise margin. This was the case when I first connected the third party router before BT did the line reset that allowed the device to work. It has worked flawlessly for months.
    Thanks
    BTW, I don't want to appear unduly ornery, but BT tech support repeatedly ask on the telephone "why aren't you using HH2 we provided?".
    1) It randomly drops OS X wifi connections which makes me really unpopular in the house.
    2) It has poor wifi interaction with work lenovo laptop.
    3) It has no support for QoS provisioning so kids streaming video interferes with work.
    4) It has unreliable and undocumented USB storage, cf third-party solution which offers glitchless SMB and FTP.
    5) Printer support is undocumented (though works better than my third-party alternative :-) )
    My first HomeHub 2 had exactly the same issues before it died at which time I invested in a third party alternative. To credit BT they sent a refurbished replacement but this has all the same issues and a non-functioning reset switch.

  • Home Hub Phones & blocking calls from a particular...

    I have a BT Home Hub 1.5 and the Hub Phone. Is it possible to block, or blacklist one phone number, so as it cannot call my hub phone?
    I tried saving it in the phone book & allocating a ring tone of "None" but it still rings. I have also looked under Advanced in the web interface for the home hub, but cannot see anything there either.

    Hi KeithAFrench,
    If you take a look at the link Choose to Refuse, you will find some information on calling feature and this could help you to block calls from that number. Let me know if you still have any question regarding this service.
    Cheers
    Paddy,
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • Home Hub 3; Apple devices

    Hi
    I've been having some serious and unusual problems with the Home Hub 3 recently!
    For some reason, web pages are loading VERY slowly. This includes the Home Hub's configuration pages as well as very simple web pages such as this forum. I can wait 60-90 seconds or longer just to load one page fully. However this is only affecting my MacBook and iPhones on my network - pages loaded from Windows laptops and other smartphones are fine! And, to make matters more confusing, once I open a stream (file download, speed test, video streaming) I have no problems whatsoever and see full Infinity speeds as expected. It's just getting to the page to begin with!
    I have tried using both default DNS settings and OpenDNS settings on my devices and this has made no difference.
    When I restart the Home Hub, things are fine for a few minutes but then this problem crops up again and only affects my Apple devices!
    Any suggestions? 
    Solved!
    Go to Solution.

    Hi there,
    I'm also a mac user and now use time capsule as my router AND wifi'd back up device - wonderful - easy peasy. But I did use the HH3 for 6 months before i moved - and did not experience any serious issues. It a basic device and did what it said on the tin. I actually found the wifi range perfectly adequate.
    some stuff to check:
    If you are wireless then check out your channel congestion (i use istumbler) : there's also apps on itunes store that you can put onto mission control. it tells you who esle is on the same channel as you...
    The more neighbours around you who use the same channel as you, the more contention you'll have on wifi speed. Check it out as a possible drain on your speed. Perfect = 3or4 channels away from others as they overlap a bit.
    also try using the 40Hz option (from within the settings part of the hub) - I don't really understand the details but i'm told it has better range.

  • Configuring a BT Home Hub to Reduce Disconnections

    Hi, I have had disconnections over the last 2 days while I was playing poker. This has caused me a great deal of inconvenience.
    I've been in touch with Pokerstars and have sent them log files, and they seem to believe that they have found the issue, and have given me instructions on how to solve it.
    Firstly, is it possible for me to implement these instructions into a BT Home Hub 3? Are there instructions anywhere for how to go about doing this?
    And also, I have had ongoing internet problems over the last year, which involved dropping connection when the phone rang but even sometimes just randomly, however, these problems have finally been solved, temporarily at least. 
    I am led to believe that implementing these instructions will not affect the work that BT has done to solve our dropping connection. Is this true? When these Pokerstars cutouts are happening I can still open my browser and the Hub still shows the internet as being on.
    Cheers in advance, Tom.
    Hello Tom,
    Thank you for contacting PokerStars. 
    The Network Status Report (NSR) you provided verifies this issue stems from a local problem and not from our site. This report runs a ping trace to various websites around the world to test your connection in general. 
    Please allow us a moment to break down that report and demonstrate. The set of traces listed below are ran to Australia, Cambridge (UK), US West and East coasts, (US) Manx Telecom (IOM), and the Pokerstars.com Website (IOM). With the exception of the PokerStars website, none of the other servers belong to PokerStars nor are they related to your connection to our servers. We use these sites to test your overall connection and path of data communication. We have only included small snippets of each trace and you may review the file you sent to review the entire path. 
    [2012/09/05 21:39:40]
    Host 210.247.216.161
    1 --- [ 192.168.1.254], Pings=7 , Quality=55 , Lost=2 
    Host 67.195.160.76
    1 --- [ 192.168.1.254], Pings=5 , Quality=25 , Lost=3
    Host 128.112.132.86
    1 --- [ 192.168.1.254], Pings=7 , Quality=55 , Lost=2 
    Host 164.67.183.186
    1 --- [ 192.168.1.254], Pings=5 , Quality=25 , Lost=3
    Host 80.65.254.253
    1 --- [ 192.168.1.254], Pings=9 , Quality=80 , Lost=1
    Host 77.87.181.63
    1 --- [ 192.168.1.254], Pings=3 , Quality=0 , Lost=5
    As you can see the traces fail starting at hop # 1 for all sites traced. 
    Hop #1 belongs to your router, which means that it may be blocking our software from connecting properly, as sometimes the default firewall that routers have can interfere with our client’s connection. Most routers are fine pieces of equipment, but sometimes they need to be updated and configured for online gaming software. 
    Please set the trigger (automatic port forwarding) for the following ports: 26002, 443 and 22. 
    Using a Web browser, bring up your router's configuration page. By default, the URL is 192.168.0.1 (or similar), the user name is "admin", and the password is blank. Once you have accessed the router configuration page follow these instructions as a guideline (exact instructions may vary depending on router model). 
    1. Click the Advanced tab 
    2. Click the Applications button 
    3. Click the Enable button 
    4. After Name, enter "PokerStars" or anything you wish to label this setting 
    5. After Trigger Port, enter 26002 
    6. After Trigger Type, choose TCP 
    7. After Public Port, enter 26002 
    8. After Public Type, choose TCP 
    9. Click "Apply" 
    10. Repeat these instructions for ports 443 and 22 
    Some players have also reduced the Maximum Transmission Unit (MTU) setting from 1,500 to 1,200 with excellent results. We recommend you to use the value of 1,312 as theoretically speaking it will be compatible with most equipment running on 53 byte packet sizes.
    Updating the firmware on the router may also stabilize the connection, but if it does not then you may need to acquire a different model or a different brand of router, or work without a router (running your cable/DSL modem directly to your computer). As a router provides some minimal natural firewall capabilities, we do recommend using a router. 
    To upgrade your firmware, please contact the router vendor or manufacturer. 
    We suggest using a wired connection from your computer to your router as wireless connections (WiFi) are generally speaking less stable. If you use a wireless connection, please check to see if your router has a Turbo or G option and turn it off. For example, in the wireless option of your router's configuration page, you may find a field with 'B/M/G Mixed' which can be changed to 'B/M Mixed'. This will disable the G option. Some "Super-G" or "Super-G Turbo" routers have a problem running in Turbo mode. Apparently they use "channel hopping" to bond multiple channels in support of this feature, but it is highly susceptible to interference from other 2.4GHz wireless networks and devices. Turning off the channel hopping feature (or the Super-G/Super-G Turbo mode) of such devices will turn them into a standard 802.11g wireless device and may make them more stable. Please contact your router vendor or router documentation for more assistance with turning off these features of your router. 
    We hope this information is useful to you, please let us know if you need anything else.
    Regards,
    Ricardo A.
    PokerStars Technical Specialist"

    You just need to forward the port.
    Please see Port forwarding problems
    Look at the example for VPN, and simply call it something else, and alter the port number to 26002.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Maybe you are looking for

  • At selection-screen output in batch job

    Hi guys, is at selection-screen output event being triggered in batch job? Thanks!

  • Photoshop is not exporting Lightroom metadata when saving as JPG

    For years I've been able to load files from LR to Photoshop CS3 and Photoshop CS4, edit the image and then save as a JPG file.  Then I can re-import them to Lightroom and they have always retained their colour ratings and star ratings.  Now that I ha

  • My macbook pro 2.2ghz, i7 , early 2011 having problem with the graphic card

    hi, just need clarification, that i was made to understand that the NVDIA graphic card installed in Macbook Pro, has a warranty of 3 years, eventough without Apple Protection Plan. Can someone clarify this , as i m having problem with it now.

  • Need a tip

    I'm debugging a program and it's quite lengthy, for my standards, anyways whats happening is that I declare an array as such String[] EmuAns = new String[100];And from there I fill each array cell as I move through questions and answers as such, EmuA

  • How to update record from datagridview

    hi every one  am new in .net am developing an inventory system for learning. i successfully develop a purchase  form where user can put record for parching invoice. as and for save record am using flowing code. Private Sub btn_Save_Click(sender As Ob