Btsport and Chromecast issues using Android 4.0.4 ...
Having waited patiently for bt to firstly accept and then finall solve the aspect ratio problem I now find that the BTsport app stops working every time I try and 'cast' with Chrome cast. I have tried BBC iplayer with Chromecast and of course it works perfectly. Isn't it time that BT sacked its software team and subcontracted the work to the BBC?
Hi Richard-a
I'm sorry to hear about the problems you're having with the BT sport app & Chromecast. Can you check out this link to make sure it's set up correctly & let me know if you need any further help with this?
Thanks
Neil
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
Similar Messages
-
And another issue - using : column like :item in a select in a cursor
i use column like :item frequently but now i'm thinking that it slows down the select making it run much more slowly . any suggestions or documentation I might use ? Do you think that it would be better to use column = :item or not to use :item at all ? Thanks a lot !
Like in Select is used as
WHERE col1 LIKE 'aaa%'
and disable the index on col1 (Sure exists Index-Function)
as it's better writing
WHERE account_name LIKE 'CAPITAL%'in comparison to
WHERE SUBSTR(account_name,1,7) = 'CAPITAL'Sure is better if you can use col1 = :item but I don't know your goal.
Regards -
IPad Mini and Exchange Issues Using Google 2-step Verification
I cannot get my gmail email, contacts, or calendar to sync with my iPad Mini, and nothing seems to work. I've set it up with Microsoft exchange using all the proper settings of m.google.com and the app specific password from my account, but to no avail. I've tried regenerating various app specific passwords, nothing worked. I've tried updating to the latest software, but still didn't work. I've even tried wiping my iPad to restore its factory settings, but no luck at all. Any other ideas out there?
Set up a CardDAV account:
http://www.mactrast.com/2012/12/how-to-setup-google-email-contacts-calendar/ -
Firefox Mobile 4 beta 3 (and pre-beta 4) fails to install on Archos 101 Tablet using Android 2.1 Eclair with no specific error. Is this a know issue or has someone been able to successfully install?
Sorry, we haven't tested Firefox on this device yet, and we aren't sure why it isn't working. If anyone (especially with Android development experience) would like to help us debug this problem, please start by creating an account and submitting a bug report at: https://bugzilla.mozilla.org/
Thanks for the report. -
If you're using Android and can't watch BT Sport t...
Just trying to bring some of the issues together. As the title suggests, this thread is for users with Android devices who are having trouble watching BT Sport using the Android app. Please provide the following info and let's see if we can all help one another out:
What device(s) are you using
What version of Android have you got
Can you log in to the App
Are you using Wi-Fi or 3G
Can you not watch anything at all or can you watch, but with problems
---Remember to mark as 'solved' and give stars when you like a post---maxriot wrote:
What device(s) are you using
Sumvision Cyclone Voyager 2 10.1
What version of Android have you got
JB 4.2.2
Can you log in to the App
Yes
Are you using Wi-Fi or 3G
Wi-fi
Can you not watch anything at all or can you watch, but with problems
video plays ok, but only shows 3/4 of the screen and video a bit squashed
Hi maxriot
Have you tapped the full screen icon on the player (the two arrows bottom right) and are you using the tablet in portrait or landscape
---Remember to mark as 'solved' and give stars when you like a post--- -
I am having difficulty XMIT/REC text messages to family members using Android phones? I have a 3GB data plan and all switches and buttons are set properly. Any suggestions?
Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport -
When trying to upload a document or attach a document in an email Firefox gives me an error "Failed to load CTDFMRES.dll" and stops responding, I have no issues in any other browsers. And I am using Firefox 4, Fixes???
You don't have to disable any addons or extentions!!!You guys are not going to believe this I figured out the problem it's really dumb...ok here goes the attachment uploader loads seperate so I got to thinking it's a popup so I went to options content and under block pop ups there is an option exceptions click on that and in the box type firefox.com and hit allow pow its fixed!!!!! :-)
-
Cache and performance issue in browsing SSAS cube using Excel for first time
Hello Group Members,
I am facing a cache and performance issue for the first time, when I try to open a SSAS cube connection using Excel (using Data tab -> From Other Sources --> From Analysis Services) after daily cube refresh. In end users
system (8 GB RAM), for the first time, it takes 10 minutes to open the cube. From next run onwards, its open up quickly within 10 secs.
We have daily ETL process running in high end servers. The configuration of dedicated SSAS cube server is 8 core, 64GB RAM. In total we have 4 cubes - out of which for 3 is full cube refresh and 1 is incremental refresh. We have seen after
daily cube refresh, it takes 10 odd minutes to open the cube in end users system. From next time onwards, it opens up really fast with 10 secs. After cube refresh, in server systems (16 GB RAM), it takes 2 odd minutes to open the cube.
Is there, any way we could reduce the time taken for first attempt ?
Best Regards, Arka Mitra.Thanks Richard and Charlie,
We have implemented the solution/suggestions in our DEV environment and we have seen a definite improvement. We are waiting this to be deployed in UAT environment to note down the actual performance and time improvement while browsing the cube for the
first time after daily cube refresh.
Guys,
This is what we have done:
We have 4 cube databases and each cube db has 1-8 cubes.
1. We are doing daily cube refresh using SQL jobs as follows:
<Batch xmlns="http://schemas.microsoft.com/analysisservices/2003/engine">
<Parallel>
<Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
<Object>
<DatabaseID>FINANCE CUBES</DatabaseID>
</Object>
<Type>ProcessFull</Type>
<WriteBackTableCreation>UseExisting</WriteBackTableCreation>
</Process>
</Parallel>
</Batch>
2. Next we are creating a separate SQL job (Cache Warming - Profitability Analysis) for cube cache warming for each single cube in each cube db like:
CREATE CACHE FOR [Profit Analysis] AS
{[Measures].members}
*[TIME].[FINANCIAL QUARTER].[FINANCIAL QUARTER]
3. Finally after each cube refresh step, we are creating a new step of type T-SQL where we are calling these individual steps:
EXEC dbo.sp_start_job N'Cache Warming - Profit Analysis';
GO
I will update the post after I receive the actual im[provement from UAT/ Production environment.
Best Regards, Arka Mitra. -
NEF files from Nikon d800 not visible in bridge and photoshop cs6- using mac ver.10.8.5. downloaded plugin from site 8.3 but issue unresolved
You can install and use Camera Raw 8.8 with OSX 10.8 Go to Help > Updates in Photoshop CS6
-
Issues using macbook with bootcamp and external apple monitor
I am having issues using an apple external monitor connected to my macbook with bootcamp - in particular, if i connect the monitor to the computer when the computer is already on, it won't work. Also, when i disconnect the monitor fromt he computer, the computer screen will go black and I'll have to re-start
Anybody experienced the same and can help?
Thxjust make sure that while its standing on its side there aren't any plugs or cables on that side. I'm not familiar with the mb port setup, but having power, two usb, and a display cable could prose a problem for sideward standing if they are on separate sides of the machine.
as the first commenter mentioned the orientation of your computer is irrelevant, but you wouldn't want to have the weight of the laptop sitting ontop of a usb or video plug that's coming out the side. -
MacBook Pro Health and safety issue: Potential Burn during normal use
Hi,
I am not a complainer. I worked for Apple of 6+ years and have had a top of the line Apple Notebook since Apple created the concept of the laptop notebook.
I recently experienced a 3rd degree burn using my MacBook Pro that I think Apple needs to warn folks about:
MacBook Pro 17"
Machine Model: MacBookPro1,2
CPU Type: Intel Core Duo
Number Of Cores: 2
CPU Speed: 2.16 GHz
L2 Cache (shared): 2 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP12.0061.B00
Serial Number: ()
SMC Version: 1.5f10
Sudden Motion Sensor:
State: Enabled
I had my laptop on my lap. I was wearing shorts. It noticed that it was warm on my leg where the left side of the MacBook Pro was touching my leg, but it didn't create a reflex pain response.
Upon completing my session, when I closed the machine and put it away, I noticed a 1 inch x .75 inch blister on my leg where it had been touching the MacBook/Pro; and it has turn out to be a significant burn.
I checked all the documentaiton that came with my MacBook Pro and there was no warning about the potential of this situation.
I recommend that Apple let owners know, perhaps through an email or a popup when they visit the Apple site. Lastly, when I encountered this issue, I wasn't running any high performance, compute bound applications. It was email. So, I have to believe that it is possible to detect wait states within the processes running and take the processors to a low power mode of operation when they are not performing actual work. Am I out in left field here?
I want Apple to be successful. I haven't heard of a similar complaint on any of the high performance PC's at work. Beyond a Health and Safety issue, this is also a reputation issue. Better to face into the storm and honestly deal with this issue.
A slightly crisp, but loyal, MacBook Pro user.
Mike Doherty
MacBook Pro Mac OS X (10.4.5) Potential Health and Safety Issue- 3rd degreee burn potential under normal useMike... I do sympathize with your situation but let me correct you:
I recently experienced a 3rd degree burn using my
MacBook Pro
Do you know what a 3rd degree burn is? A 3rd degree burn involves the dermis, and is full thickness involving the subcutaneous tissues and fat underneath your skin layers. This is something that usually happens when man meets fire, electrocution, and chemical burns. A 3rd degree burn is not typically achieved by a simple transfer of energy by conduction, unless extreme heat for an extended period of time.
I had my laptop on my lap. I was wearing shorts. It
noticed that it was warm on my leg where the left
side of the MacBook Pro was touching my leg, but it
didn't create a reflex pain response.
Reflex pain response? Don't try to make up medical terminology. You didn't feel it much like you don't feel the sun when you get a sunburn initially... your skin slowly adjusted to the temperature, and at some point the heat increased over the threshold of which causes damage. You should have gone to the doctor if you were overly concerned.
Upon completing my session, when I closed the machine
and put it away, I noticed a 1 inch x .75 inch
blister on my leg where it had been touching the
MacBook/Pro; and it has turn out to be a significant
burn.
You're right, if you have a 1inch by almost 1 inch heat related blister on your leg, it is bad, nothing that I would consider significant. That is less then 1% of your body, probably about 0.25% to 0.5%, and only a 2nd degree burn. Your most significant complication would be a local skin infection.
I checked all the documentaiton that came with my
MacBook Pro and there was no warning about the
potential of this situation.
Actually... I'd hate to call you a liar, but I'm pretty sure that it does warn about burns.
To confirm this, apple has also information online:
http://docs.info.apple.com/article.html?artnum=30612
I recommend that Apple let owners know, perhaps
through an email or a popup when they visit the Apple
site.
They do... link above.
Lastly, when I encountered this issue, I wasn't
running any high performance, compute bound
applications. It was email. So, I have to believe
that it is possible to detect wait states within the
processes running and take the processors to a low
power mode of operation when they are not performing
actual work. Am I out in left field here?
No, you're definitely not. Here's where I start to agree with you. For the computer to heat up that much, when not doing things like rendering video is abnormal, and you deserve to have apple check out your computer. I think you should contact them on this concern.
I want Apple to be successful. I haven't heard of a
similar complaint on any of the high performance PC's
at work. Beyond a Health and Safety issue, this is
also a reputation issue. Better to face into the
storm and honestly deal with this issue.
It's harder for other manufacturers... our computers are aluminum, designed to disperse the heat. Technically they are considered "portables" not laptops, but I don't get into that argument because I disagree with the word "portable"... it's meant to work on your lap, and if you can't comfortably using regular apps, you deserve an answer.
A slightly crisp, but loyal, MacBook Pro user.
Hey, at least you're taking it with some humor. It's a shame you had to get hurt as a result of your computer. If I were you I would have gone to your Primary Care Physician, documented the burn, and returned your computer for a new one, and for something say, a free iPod for your pain.
Sorry you got hurt, I think you should have your heat issue professionally investigated through apple care -
What sequence setting would you use to edit both 1280 x1080 DVCProHD (P2) and 1920 x 1080 AVCHD (Sony) in a single timeline in FCP. I'm experiencing quality and rendering issues. I've tried numerous settings but can't seem to figure this one out. Thanks for your assistance.
Although you can combine the avchd 1920x1080 material with prores 1920x1080 in the same timeline, you might land up saving time just converting everything to 1920x1080 prores 422. You'd probably reduce the amount of rendering while you're working and exporting when you're done by a great deal. This workflow will require much more drive space.
-
Process and Forms - Issue with Method which Uses Imported Form Values
We are doing a project to implement ESS and MSS. Using Adobe Process and Forms we generated a process with form and workflow.
The workflow's first step uses a version of TS17900110 task to move the form to the workflow container.
Binding:
export:
&FORM_STANDARD& @0E\QAssign Value@ @9T\QGets data for...@ &FORM&
'USER_ID' @0E\QAssign Value@ @9T\QGets data for...@ &FORM_FIELD_NAME_1&
'PERNR' @0E\QAssign Value@ @9T\QGets data for...@ &FORM_FIELD_NAME_2&
'AWART' @0E\QAssign Value@ @9T\QGets data for...@ &FORM_FIELD_NAME_3&
Binding
import:
&EMPL_USERID.OBJID& @9S\QReceives data from...@ @0D\QAssign Value@ &FORM_FIELD_VALUE_1&
&PERNR& @9S\QReceives data from...@ @0D\QAssign Value@ &FORM_FIELD_VALUE_2&
&AWART& @9S\QReceives data from...@ @0D\QAssign Value@ &FORM_FIELD_VALUE_3&
The workflow is bringing values for: EMPL_USERID, PERNR, AWART.
We need to write these field values to a table using a method. We are using a custom task to do this.
The task triggers a method which calls a FM which makes the update to the table.
The step with the custom task is a foreground step which the workflow stops for so we can test execute it.
When we execute there is a breakpoint in the ABAP code which stopps us at the point where the values are being read.
We are trying to read values: 'USER_ID', 'PERNR', and 'AWART' but the debugger is not showing any values being brought in.
The binding we currently have for the step we feel is the problem:
This is all we have in there so far - NEED suggestions/advice:
Binding export:
&ZABSREQ& @0E\QAssign Value@ @9T\QGets data for...@ &_WI_OBJECT_ID&
(&ZABSREQ& - This is a BOR)
Any information is appreciated.
alicia.morante at gmail.com
alicia.morante at us.army.mil
Edited by: Alicia Morante on Jan 23, 2012 8:43 PMWe were very anxious to solve this issue.
While I was posting my counterpart realized that we did not have target containers setup to receive the values from the workflow.
Once those were set the values were able to be read from the FM.
Here's the binding updated to:
&EMPL_NUM& @0E\QAssign Value@ @9T\QGets data for...@ &EMPL_NUM&
&SUBTYPE& @0E\QAssign Value@ @9T\QGets data for...@ &SUBTYPE&
Still gave you some points for helping - Thank you. -
I did the recent update on my ipad 7.0.4 and now it keeps freezing up and can not use it. Tried reboot and works for a second then freezes right up again. Anyone else have this issue or know a fix?
Madmonkey,
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
Gaylefromnewhope,
Seems like you tried this all ready and it didn't help.
Next might be to reset all settings.
Settings > General > Reset > Reset all Settings
Note that when you do this you will not lose data but you will have to enter all passwords again.
If that doesn't help you might tries a restore of your iPad using iTunes on the computer you normall sync with. Do a backup and save all data first. Or
Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. -
My partner has the Iphone 5 and I am using a MacBook with version 1.0.2. When using the face time app to call him he says that cam freezes and he is unable to hear me. Any ideas of the problem and and ideas for resolving the issue?
Had the same problem, the only fault and the reason why it happend is a bad wifi connection!
Could ofc be something else, but thats my two cents!
Maybe you are looking for
-
Mountain Lion & Airport Express (1st generation)
Since upgrading to Mountain Lion, my Airport Express (1st generation) has becomed unusable. How can I still use it? Feels kinda absurd, it is still working perfectly, although old.
-
USER_DATASTORE: Could DBMS_LOB be leaking memory?
We've got a database which is indexed with USER_DATASTORE and the following procedure. We're getting an occasional situation where this message appears in the alert log: ORA-04030: out of process memory when trying to allocate 8716 bytes (pga heap,Ge
-
Business Process Set up - Begineer Questtion
In our company we are planning to implement business process and monitoring in coming months. I am from the basis admin group and would like to know from the system side what need to be done to implement the Business process in SLM. What my understa
-
What the title says.
-
Nokia 5000d help (can i use this is spain with a u...
Hiya Guys Can someone please tell me if i can use a Nokia 5000d Mobile in spain with a UK T-MOBILE SIM? Many Thanks