Budget Settings update problem

Hello everyone!
I'm having a problem when I try to change the budget settings in Administration -> System Initialization -> General Settings -> Budget tab. On my actual settings, the "Budget Initialization" box is checked and the option "Block Deviation From Budget" is marked, but when I change it to "Warning" it doesn't update.
How can I fix this? I need to fix it as soon as possible!
Thx in advance,
Juan

Juan - this was a long time ago and I am not certain whether this will help or not, but I remember two things that might do the trick.
ONE: I remember we had a problem (not documented anywhere), where the GL Account was put "On Hold" and it stopped us from doing something with Budget. The SQL is just like Jimmy's except there are a few more fields...just check to see if any accounts with Budget = "Y" also has FrozenFor = "Y"
SELECT
T0.AcctCode,
T0.AcctName,
T0.Budget,
T0.FrozenFor AS 'On Hold',
T0.ValidFor
FROM OACT T0
WHERE T0.Budget = 'Y'
TWO: We changed the current period (we were in November) to be in the NEXT year and then set some budget parameters (maybe scenario under Financials > Budget Scenarios?). But since you have run the budget before, I can't picture that being the problem...
Please let us know how you progress...
Zal

Similar Messages

Windows 8 Freezes after last "Lenovo Settings Update" anytime the pointer goes to a corner

After the most recent "Lenovo Settings Update", my Windows 8 freezes for a few minutes (minimum of two) anytime the pointer hits one of the hot corners. The system also freezes for a couple of minutes or less when certain apps are started or the mouse clicks on certain apps. This is a repeatable error. I can restore the system to the setpoint previous to the "Lenovo Settings Update" and everything works fine. re-Install the update and the problem comes back. The system also freezes for 5-10 seconds when an e-mail message comes in and the notification appears. Also happens under other different circumstances but the worst is when the mouse pointer goes to any "Hot Corner". I can reset the system to the last restore point and have everything work fine but anytime I go to "Lenovo Settings", it forces the update which then creates this problem.
Has anyone else seen this issue? I have all the updates for Windows 8 and Lenovo installed including all new Bios updates that are published. The model is a Lenovo ThinkPad Edge S320u (otherwise known as the "Twist". The error is repeatable in all screen modes, tablet modes and multiple monitor modes.
For now I will go back to the latest restore point but would like to see the issue resolved.
Thanks.
Bob

I had the exact same issue with the same computer (Thinkpad Twist)! Am very happy to have come accross this page through a web search.
After installing some updates through Lenovo Update App (because of a message that critical updates are available on the Lenovo Support App from Startscreen), my whole system would freeze for about two minutes when moving the cursor over any corner. This is very troublesome not only because it effectively disables the Windows 8 "hot corners" (which I didn't use much anyway, preferring to launch the tasks thus accessible differently), but mostly because it is necessary at times to access the corners, notably to close any document, webpage or other instance of any program that was open in full screen (which usually all of my docs/programs are, considering the Twist's small screensize...).
Afer reading rbagnall's post I first tried uninstalling updates through the Lenovo Update center. But there, once installed, updates don't seem to be removable. Why Lenovo? You can look at the list of installed updates but not make any change. Now I have followed rbagnall's advice and restored my computer with a restore point, sufficiently far back, as I didn't know exactly which update caused this. It worked! Not exactly pleasant, because I had to reinstall some programs and change some settings again, but the problem got resolved.
I went further and tried to see which update causes this by installing them one by one and seeing when the problem appears. The culprit seems to be "Display Mode Orientation Update for Windows 8". One needs to install the "Lenovo Power Management Driver" with it (which is actually listed under optional updates, whereas the Display Mode update is shown as a critical one, but the former is selected automatically when the later is chosen, and one cannot unselect it, a message appears then that it is necessary for the other update). So it could be that one as well (haven't checked whether installing it without the Display Mode update creates the same problem). In any case, once these are installed, the problem appears.
I have now restored my PC again to the restore point, and haven't installed any Lenovo update, not even the other critical one, as I don't know what it's for (Critical patch to fix TVSU UTS issue - I haven't had this issue, and any web entries on this I found dated back to 2009). In the optional updates there is also a BIOS update, which I had installed previously, but I don't know what it's for either. If there is anything terribly useful in either (or other optional updates), please tell me.
For now I have uninstalled the Lenovo Support Startscreen App (which seems to be more annoying than helpful), and will refrain from updating any Lenovo drivers from now, which seems to do more harm than good (everything was working fine before the update)...

4G LTE iPhone 5: Carrier Settings Update never came

Hello,
Just to say, before I start: This question is related to Switzerland's Swisscom's 4G LTE network and iPhone 5.
I have updated to iOS 6.1 (for Swisscom 4G LTE compatibility, it's now compatible), but didn't get the carrier settings update, and when I reset the iPhone (including erase all content), I got the Carrier Setting Update and it enabled 4G LTE, but I have progressed in lots of apps and games (mainly apps), and it will be very difficult to do a full restore and recover all my progress etcetera. How can I get the Carrier Settings Update? I went to Swisscom, and they said to erase the iPhone, but again this would be a big inconvenience and I am trying to avoid it.
Sorry about any problems: I'm not very tech savvy with iOS devices, and this is my first post here so I may have put in the wrong section.
Thanks a lot in advance

Well, I've connected my phone to iTunes, and still nothing has come. My friend's iPhone 5 did have enable LTE, when he updated and I believe he got it over the air, and didn't connect it to iTunes. iTunes is still syncing...
Thank you very much for helping
It's suddenly appeared. My three friend's iPhone 5's carrier settings update came straight away after updating this morning (we updated together), and mine has come about 7 and a half hours later... but still, it's come. I don't think this was related to iTunes (by the looks of it).
Thanks a lot for helping me, and for the quick replies.
Message was edited by: chetan20k

My volume on the Iphone 3GS is very low is it an equipment problem, setting problem or update problem?

My volume on the iPhone 3GS is very low. Is it an equipment problem, settings problem or update problem? And, is there a fix other than having Apple fix it?

Have you had a look here to make sure it is set up how you want it...
iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

HT4623 iPad software update problem....help!!

My iPad does not have a "software update" icon in the General Settings. So, how do I accomplish a software update?

Use your computer and iTunes:
See the chart below to determine whether you can upgrade your device and what you can upgrade to.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
     Device                                       iOS Verson
iPhone 1                                      iOS 3.1.3
iPhone 3G                                   iOS 4.2.1
iPhone 3GS                                 iOS 6.1.x
iPhone 4                                      iOS 6.1.x
iPhone 4S                                    iOS 6.1.x
iPhone 5                                      iOS 6.1.x
iPod Touch 1                               iOS 3.1.3
iPod Touch 2                               iOS 4.2.1
iPod Touch 3                               iOS 5.1.1
iPod Touch 4                               iOS 6.1.x
iPod Touch 5                               iOS 6.1.x
iPad 1                                          iOS 5.1.1
iPad 2                                          iOS 6.1.x
iPad 3                                          iOS 6.1.x
iPad 4                                          iOS 6.1.x
iPad Mini                                     iOS 6.1.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS to Version 6.0.x from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

Carrier settings updates updating... & updating... &...

My iPad's carrier settings updates http://support.apple.com/kb/HT1970 are updated again and again, every time iTunes starts up or my iPad gets in its reach.
Am I the only one? And does anyone know what I might do about it?
Thanks a lot!

Did you manage to fix the problem? I just posted the same exact question...

I deal with a itunes update problem when i try to update i get coneection has timed out error! i had the same problem when i had vista.. yesterday i formated my pc but i still have the same prommblem. i dont deal with such problems on direct downloads.

i deal with a itunes update problem when i try to update i get coneection has timed out error! i had the same problem when i had vista.. yesterday i formated my pc but i still have the same prommblem. i dont deal with such problems on direct downloads.i have this problem only with tunes. maybe my conection freezes for a sec idk

Sorry I gave this a 'this helped me' but after a long struggle I found some ticked box somewhere from some unauthorised chrome extension blaaa....... the link you gave was great, not only did it confirm all the bad things google is supposed to be up to it provided a better browser. Cheers man.
Anyone who find this; I disabled all extension in chrome. I then searched the word proxy in the settings section. A button came up, "change proxy settings" I clicked on it. Earlier it was greyed out as an extension was interefering.. It brought up a box with my own settings from my computer. Then I clicked LAN settings, then unchecked the 'Use a proxy server' button.
P.S. If you're using chrome, bail, and dowload Komodo Dragon. It's virtually identical, but you're not tracked, and you can use chrome extensions, and you can quickily transfer your chrome preferences into it.

HT201270 I have an iPad 3rd gen. A carrier settings update notification has appeared on my screen, and it doesn't do anything when I press either 'update' or 'not now' . Because the notification is still there, I am unable to use any apps or shut it down.

I have an iPad 3rd gen. A carrier settings update notification has appeared on my screen, and it doesn't do anything when I press either 'update' or 'not now' . Because the notification is still there, I am unable to use any apps or shut it down. What should I do?

Have you tried a reset by pressing and holding the sleep/wake button and the home button for 20 seconds (maybe longer) until the Apple logo appears, ignore the red slider. Then turn back on. You won't lose any data doing the reset.

I inherited my husband's iphone 4s. After erasing all of the previous settings, updating to ios 8 I went on icloud to set it up. During the set up, the screen froze on "carrier settings update". I can reboot, but the message comes right back.

This is a phone re-set from a previous user. Reset from icloud. Froze during set up, on "carrier settings update" and has the phone number pad with it. I reboot but it comes back and I can't get past it.

Hey Jackie,
Welcome to Apple Support Communities,
Take a look at the article linked below, it provides troubleshooting suggestions that’ll solve issues like the one that you've described, where your iPhone 4s has a blank black screen.
Get help with the screen on your iPhone, iPad, or iPod touch - Apple Support
If you see a solid color screen (black, white or blue)
Plug in your device to a power source. If you see the low-battery screen when you plug in, let your device charge for at least 10 minutes (20 minutes for iPad) before using it.
Reset your device while it's plugged in.
If resetting doesn’t fix the issue, restore your device.
If you still see the issue after you restore, contact Apple Support.
Cheers,
-Jason

Update problem - VBDATA table

Dear All,
We have update problems in our Quality systems, and also in every R/3 system that we create from a Production system copy.
Sometime the UPD and UP2 work processes hung without apparent reason.
In the SM50 I can see one or more of my update processes running for a lot of time (many hours) on the table VBDATA without perform any action.
In the tcode SM12 I donu2019t see any kind of lock, and I donu2019t understand why only sometime this problem happens.
Of course, from the SM13 I can see that during this problem the system is not able to perform any kind of update.
As I told in the beginning of the message, I have the same problem in other two R/3 systems, both created with a system copy from the production system.
The Production and the Developer systems seem not affected by this problem.
Have you got any idea about the reason of the problem?
Even if the Production systems is not directly affected, all the IT department is not able to work on the Quality system (or any other Test system), and the only workaround is to kill the UPD (or UP2) WPs affected.
Thanks in advance,
Federico Biavati
My R/3 System is a 4.7 on SLES9 and Oracle 10.2.0.2

Hello Siva,
This is what I did:
> Check how many entries do you have in VBDATA currently.
More than 1.000 in every SAP systems that Iu2019m creating from Production
> You might want to run the reorganize updates program to clear the old updates
> that are pending/in error
Good point!!
After the reorganization (ST14 u2013 Reorganize update requests) the table VBDATA is empty.
Iu2019ll check and Iu2019ll let you know if the problem is definitively solved.
Thanks for you help,
Federico

Chart x scale update problem

LabVIEW 8.5.1
Sweep Chart Problem
The x scale values do not update until after the 2nd sweep. The red line cursor gets to the end of the sweep and starts the next, but the scale numbers do not update until the next sweep starts.
It appears to be a problem with the chart, since it happens with any vi with a sweep chart. I've used versions 6 through 7 for years and never seen this. I've only recently moved to a new job with a new machine and version 8.5.1., so I'm not sure what to try.
I've included a simple example.
Thanks much,
JSC321
Attachments:
Chart Sweep Scale Update Problem.vi ‏32 KB

You have a typical race condition!
There is no data dependency between the property node and the while loop, so in your case the loop starts executing first and the property node starts slightly later, immediately erasing the first point. Execution order is not defined.
All you need to do is add a data dependency, e.g. as with the error cluster in the image. This forces the property node to complete before the loop is allowed to start.
(Execution order is enforced even if the wire value is not even used inside the loop )
Try it!
Message Edited by altenbach on 12-23-2008 11:08 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
HistoryRace.png ‏10 KB

After settings update can,t delete email without opening it

After settings update can,t delete email without opening it

In your mail list, do you see the word 'edit'? If you choose that then you can select whatever mails you want gone and delete them at once.

Updating problem...I have a update that starts out going through but then does not finish just keep running

also with the update problem it says software update and below the running bar it says connecting to the server

Please do the following: 
#Go to [http://www.mozilla.com/en-US/firefox/fx/?ref=logo Download Firefox 4.0.1] and download a fresh installation file to the desktop. 
#Then go to Add/Remove Programs, scroll down to "Mozilla Firefox" and remove it, choosing to keep your bookmarks, customizations etc., (''don't checkmark the box''). 
#Then reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox 
#Finally run the installation file you downloaded to the desktop earlier. 
Your bookmarks, customizations etc., are maintained in a different location and will become available to you again once you complete the installation.

10.5.7 update problems

After installing the 10.5.7 update, Mail, iTunes and iPhoto will not run anymore. Anyone else having this problem?

jjtopspin wrote:
Before I came to these apple discussions re: update problems with 10.5.7, I tried to update this version yesterday and at the end of the download this message came up, the update "Mac OS X update" can't be saved. The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed to Apple.
I got the same message. The downloaded file that generated the message was only about 560 KB, indicating it was an incomplete download. I moved it to the trash & tried again. The second download attempt succeeded. I had a minor if nerve-wracking issue with the update (the blue looping screen reported in another topic in this forum) but after a forced shutdown & restart the update was completed successfully.
I have since updated my two other Macs so all those listed in my profile are now running 10.5.7. All do so without any problems & in fact work better & more stably than ever before.
I doubt that I'm unusual in this respect. Some users will have problems but I believe most won't, & for those that do most problems will turn out to be caused by something other than the update itself. So it has been for every previous Leopard update; I see no reason to think this one will be any different.

Cache update problem in Integration Directory

Hi all,
We have a cache update problem in our PI development server.
If we try to edit, save and activate any of the ID objects, under Cache notifications>Central Adapter Engine> all these objects are displayed as gray items.
We have tried:
1. Clearing the SLD Data Cache.
2. Did SXI_CACHE complete refresh.
3. Did CPA cache refresh.
4. Did a complete cache refresh of the server.
5. Restarted the server.
But still the problem has not bee resolved. Could you pls provide your inputs and resolution points.
Thank you very much.
regards,
Jack Nuson

HI Jack ,
first try to manually update the cache from ID select on your cache notifiaction and click on delta cache refresh button and refresh button .IF it does not yied any result then
Perform a full cache refresh using the URL
http://<host>:<port>/CPACache/refresh?mode=full . If the cache refresh happens properly then your problem will get resolved other wise you have to see the cache log to view why it failed there it will show you the exact reason . You might need to restart your java server also if the problem persist .
Regards,
Saurabh

Budget Settings update problem

Similar Messages

Maybe you are looking for