Bug - Wholesale AND Retail pricing bug on one order?

Hi,
Has anyone else had this issue? SA wholesale customer has done an order on our website where:
1) They have logged into wholesale zone and have wholesale pricing applied
2) Their order has some products in wholesale pricing but ALSO some pricing in consumer / retail pricing.
3) They chose a retail shipping option yet they are a wholesale customer and should have seen different shipping rates.
Getting worried about BC - this is a really serious issue. Surely the order wouldn't be able to process as wholesale AND retail pricing on one order? Surely as a wholesale customer they should only see wholesale shipping?
Any know a fix or had this happen to them?

Hi Silviu,
The issue is getting worse. Is there any update?
ISSUE ONE = we are receiving invoices from customers that have a mix of consumer and wholesale pricing when the customer is ticked as 'wholesale'
ISSUE TWO = some wholesale customers have no tax on their orders (yet we have the destination state option on our checkout page that adds on tax) and they should be paying tax * Not charging people tax is illegal and we can be fined by the ATO! People even end up in jail for not paying tax.
ISSUE THREE =some wholesale customers have 1 item with tax on their orders and the rest without tax (also using destination state option).
I've checked the pricing of the items and they are correct.
I've checked the wholesale customers are marked wholesale and they are.
I've checked the tax codes and they are correct.
I can't understand how one item can have tax and others can't when the customer is a wholesaler so tax should get added and pricing should be wholesale.
Can you please escalate this. Doesn't BC understand this is a serious issue??

Similar Messages

  • Info on Wholesale and Retail business

    Hi Friends,
               Can some one tell me , where I can get good information on Wholesale and Retail business related in BW. Is there any SAP delivered content??
    thanks alot in advance,

    Psycho
    There is a standard business content available for BW-SAP Retail in industry solutions. See if this helps for you
    http://help.sap.com/saphelp_nw04/helpdata/en/86/39d6386e24f90ae10000000a114084/content.htm
    Thnaks
    Sat

  • Taxes and other pricing elements in Procurement orders.

    Dear Friends,
    Pl explain me how to cover taxes and other purchse (pricing) conditions in procurement orders in sap mm implementation.
    Awiting for your valuable input.
    Thanks & Regards,
    Pratap.

    Hi,
    You need to configure the complete tax and pricing procedure in SPRO.
    Please goto http://www.help.sap.com and find the steps.
    Cheers,
    Saish

  • What is One Order framework ?

    Hi All,
           Can someone please explain me what is a OneOrder framework ????
    Also, any documents on the same would be highly appreciated.
    Email :- ashish . walke @ gmail . com
    Regards,
    Ashish

    Hi Ashish,
    The One Order Framework is defined as the Framwork to handle all the CRM One Order Documents. Basically CRM One Order Documents are Sales Orders, Service Orders, Activities, etc. They all have a common structure to handle the data. They are basically grouped into
    Header Part
      - Items
      - Items ....
    So the header and item relationship is 1..n There are set of API's which handles the Create, Change and delete scenarios of the One Order Documents. They are CRM_ORDER_READ,CRM_ORDER_MAINTAIN,CRM_ORDER_DELETE,etc The Function Group is CRM_ORDER_API.
    Have  a look at the forum threads. It will give you more information about the One Order Framework.
    Hope this will clear your idea.
    Thanks,
    Samantak.

  • In Indesign CS6 I export an artboard to  TIFF with the sdk's funtion SnapshotUtilsEx- ExportImageToTIFF(iStream) and, the resulting file is one pixel too large in the X, leaving a transparent strip on one edge. Any idea if there is a bug in the sdk?

    In Indesign CS6 I export an artboard to  TIFF with the sdk's funtion SnapshotUtilsEx->ExportImageToTIFF(iStream) and, the resulting file is one pixel too large in the X, leaving a transparent strip on one edge. Any idea if there is a bug in the sdk?

    An easy example to prove this bug of Indesing CS6:  I create a psd with Photoshop CS6, with width 505 pixels, height 317 pixels and a resolution of 300 pixels per inch. This psd is placed on a page in InDesign CS6. Then I try to export it as a tiff with the functions:
    fSnapshotUtilsEx->Draw(flags,fullResolutionGraphics,greekBelowPtSize,enableAntiAliasing,tr ansparencyQuality,abortCheck,pVPAttrMap,bDrawNonPrintingObjects);
    and
    SnapshotUtilsEx-> ExportImageToTIFF (iStream)
    The resulting tiff has a width of 506 pixels (one pixel more in width). It will happen the same if we start with a width of 507 pixels, etc.
    This error does not occur with Indesign CS5, nor Indesing CC.

  • I've a "bug" with the apps downloading. This one stops at the end and stays like that infinite. The app doesn't appears normally on the homescreen. Someone can fix this?

    I've a "bug" with the apps downloading. This one stops at the end and stays like that infinite. The app doesn't appears normally on the homescreen. The app is on the home screen, and its downloading is blocked at its end, without showing the app like it should when it's finished downloadung. Does someone can help me and fix this please?

    Hi Tom
    Thanks for replying!
    I had heard that these switches didn't stack unless everything was identical.
    I only tried it at all out of pure desperation.
    I've applied and tested every version 3 firmware in standalone mode via a console cable and xmodem.
    They either never come up properly receiving decompression errors and reboot constantly in a loop.
    Occasionally they stall / jam and stay there displaying the same error with no rebooting.
    And twice out of 80-100 times I got it to boot to the username and password screen in standalone mode.
    But as soon as I made a change it crashed and started the rebooting cycle again.

  • Pricing bug?

    Hi,
    I'm interested in purchasing this software, but I'm finding some real oddities in the pricing. I clicked on the join button in the upgrade section of my creative cloud, made my selection (one month auto-renew membership, no upgrade - all of my previous versions are too old) which was marked at $74.99 and was then prompted to sign in.
    At this point, I was presented with the pricing in my local currency (euro) and it appeared as “€74,99 per month, plus tax” (the comma there in the currency is definitely a localization bug - it should be a decimal point as it is for the US). Is this sign-substitution a bug?
    The fact that it's the same figure leads me to think the signs have been substituted rather than the currency being converted on some bizarre system (a 30% mark-up just to move it a few thousand miles seems a bit mad, after all ) – hence my wondering if it’s a glitch in the system and what the true price is.
    Thanks for your help.

    Hi Silviu,
    The issue is getting worse. Is there any update?
    ISSUE ONE = we are receiving invoices from customers that have a mix of consumer and wholesale pricing when the customer is ticked as 'wholesale'
    ISSUE TWO = some wholesale customers have no tax on their orders (yet we have the destination state option on our checkout page that adds on tax) and they should be paying tax * Not charging people tax is illegal and we can be fined by the ATO! People even end up in jail for not paying tax.
    ISSUE THREE =some wholesale customers have 1 item with tax on their orders and the rest without tax (also using destination state option).
    I've checked the pricing of the items and they are correct.
    I've checked the wholesale customers are marked wholesale and they are.
    I've checked the tax codes and they are correct.
    I can't understand how one item can have tax and others can't when the customer is a wholesaler so tax should get added and pricing should be wholesale.
    Can you please escalate this. Doesn't BC understand this is a serious issue??

  • ITunes 10.4 and Windows 7 bug thread

    I thought I would start an entire thread devoted to iTunes 10.4 and Windows 7 bugs since there are MANY people reporting various issues and may not know about all of them. Hopefully this will combine a list of all bugs for reference and help others. So far, most of this effects Windows 7 64 bit, but some are reporting issues under 32 bit too.
    I have spoken with both Apple Care and a higher level tech at iTunes support. The iTunes support tech said they were "looking into all reported bugs and are aware of issues with version 10.4, especially under Windows 7. They encourage others to report their bugs to iTunes support so they can work on this and find all the issues.
    KNOWN BUGS:
    Album Art copy/paste broken - A bug that causes copy/pase from clipboard where album art is not displayed in the info tab as before. Some have reported success by dragging the image file over to it vs copy/paste method but it is still very much spotty and a known bug.
    iTunes store not working - Some have been effected with the iTunes store not working properly for them. Personally I don't have a problem but this has been for some.
    "Purchases" link not working in iTunes - When you click on "Purchases" link on the right column, all your purchases are missing and do not show up. This includes, music, movies, apps, etc. This is also a known bug and one that I have personally. Works fine in iTunes 10.3 for Windows 7 64bit and also works fine under both Snow Leopard and Lion OS.
    Sync issues - Some have reported syncing issues since upgrading to 10.4 iTunes on Windows 7. This is a bit spotty as well as I have no trouble but there are others that have reported issues.
    Solutions:
    For now, the only way to fix this is to use iTunes 10.4 under Snow Leopard or Lion OS. Also, you can uninstall (not repair) 10.4 and install 10.3 again which should work.

    You are correct and I wish that I had known this before spending 4 days and a lot of trouble going over this with both Apple Care and iTunes support. They had me jumping through hoops and didn't know anything until it was finally escalated. Only then did I get a vague response like I mentioned in the first post. It's troubling to me how a simple response from anyone there could've just said we know about this and they are bugs in 10.4 causing this.
    There are other issues too as you point out with the syncing and crashing. Anyway, hopefully others will find information here more useful than calling Apple for help. Not much we can do now except roll back to 10.3 for those that kept it and hope also they can updated Apple Application Support component.

  • Using TFS and email for bug reports or feature requests

    We've just rolled out a beta of our website and are soliciting feedback from external customers.  We set up a distribution list in Exchange where those emails all come to, but it's not practical.  It's difficult to track, it's non threaded and
    we have different people responding and testing the same items.
    We recently installed TFS 2010 to give it a trial run (nobody has ever used TFS before at all nor is anyone really familiar with it) and I have to imagine that you can use TFS to provide this sort of functionality.  Is there a paper or website out there
    that discussion doing this via TFS?  Basically what I'm looking for is:
    1. User is presented with a webform, fills it out, clicks submit which generates an email sent to us (done)
    1b. An auto response message is sent to the user who submits the form (not done as Exhchange distro wont do this without going the public folder route)
    2. Instead of the email coming to us, it would go to TFS which would auto-open a ticket
    3. All of us would have access to the ticket queue and be able to do the following
    a. ask further questions to the end user, have it sent to them automatically, update the ticket with the emails so we can all follow the thread
    b. able to reassign the ticket to a backlog, or as a bug to a current iteration or simply close it
    I'm an IT guy/project manager rather than a developer but I'm pretty good at following documentation if I can find it for what I'm trying to do.  Thanks for any pointers.

    Ahh, thanks for the extra details and clarification.  The features that you are asking for are definitely not provided out of the box, but are implementable using the TFS SDK.  Inlining a suggestion of one way your developers could
    implement this:
    1. User is presented with a webform, fills it out, clicks submit which generates an email sent to us (done)
    Have the code for the webform make a call to TFS to add a new work item with a special iteration path, e.g. "UnconfirmedCustomerRequests" or a special field like "ActiveCustomerRequest" set to true.  You can add a potentially add customer
    email address field to the work item template to keep track of the email address.  Then send the email out, and include the TFS bug id (and a link to the bug in TFS web access, if desired) in the email.
    1b. An auto response message is sent to the user who submits the form (not done as Exhchange distro wont do this without going the public folder route)
    Why can't the code for your web form take care of that?
    2. Instead of the email coming to us, it would go to TFS which would auto-open a ticket
    Taken care of in step 1
    3. All of us would have access to the ticket queue and be able to do the following
    a. ask further questions to the end user, have it sent to them automatically, update the ticket with the emails so we can all follow the thread
    You can write a web service that listens for notifications from TFS when certain work items are changed.  Updating the work item from customer replies may be trickier without writing another web form that talks to TFS or an email
    parser.
    b. able to reassign the ticket to a backlog, or as a bug to a current iteration or simply close it.

  • Good add-ons for retail, point of sale, wholesale and distrbution industry

    Hi,
    Which are the good add-ons available in India for retail, point of sale billing, wholesale and distribution industry?
    Typical requirements are:
    1. Point of sale billing
    2. Barcoding - if same item is scanned twice, the qty of the item should increase, rather than creating a new item row.
    3. Combo Offers - Buy 1 Get 1 Free, etc.
    4. Repacking of items - buy in bulk and sell in loose
    5. Support for multiple MRP for same item, example an item with old MRP is in stock, and the same item with new MRP is also in stock
    6. Loyalty Point, Membership schemes
    7. Multiple Payment Modes in same Invoice: Coupons, Card, Cash, etc.
    The add-on should work on B1 Starter Pack licenses.
    The customer operates small sized departmental stores from 3 locations, with 1 or 2 billing counters in each location, and has limited budget due to which we are suggesting B1 starter pack to him.
    Thanks.

    Hi,
    Please refer license guide for starter package: (page 10)
    http://www.rels.co.il/wp-content/uploads/2013/07/B1_90_LicenseGuide.pdf
    Also check limitation of starter package:
    SAP Business One Starter Package - SAP Business One Central
    Thanks & Regards,
    Nagarajan

  • 4.0 Bug - Drag and Drop File to Editor

    Another one:
    Unable to Drag/Drop File
    In 3.2.2, I could drag a file from the explorer window into SQL Developer to have SQL Developer open it in a new tab.  I have been unable to get this work in 4.0 Beta.

    Logged and bugged.
    Please limit your bug reports to one per thread.

  • Bug Found and Fix Found Creative ZEN XFI Style 32 Gig

    9Bug Found and Fix Found> Creative ZEN XFI Style 32 Gig?Hello I was having problems getting my MP3 TAGS to show up on a number of my MP3's.
    Whenever I loaded my files onto my ZEN it would show up as a Voice under Recordings.
    And the file name would be "MIC and the date file created etc..."
    I noticed that these files where all starting with the letters MIC at the front of the filename...
    For instance: Michael_Jackson_Thriller.mp3?? or? Michael_W_Smith_Let_it_rain.mp3
    and so on and so on... ANY file that started with the letters M I C? would be thrown in as a voice recorded file and the TAG would not operate.
    I have the latest Firmware on my MP3 Player.
    The fix was just to change the file name so it did not start with MIC... so i went and switched Michael Jackson to M.Jackson and also switched Michael W Smith to M W smith.
    The tag showed up appropriately and I have had no problems since.
    It would be nice if there was another Firmware update so that MP3's could start with the letters MIC also I was hoping to bring awareness to this situation for other users.

    =Re: Bug Found and Fix Found> Creative ZEN XFI Style 32 Gig?I did three methods of?loading the files.
    I used Windows Media Player to sync the files.
    I used Creative Central to transfer the files.
    These two methods produced results where the file starting with MIC turned into a voice recordings.
    I also had problems just copying and pasting the files (using windows explorer).
    I have not had any problems with any other file. I normally use MP3Tag to tag my files.
    However i even tried using Windows Media to tag the file and I even tried using Creative Central to tag the files.
    I tried as many work arounds as possible. But once i renamed the file it worked.

  • Time and date reset bug

    hu guys, recently ive been experiencing a time and date reset bug, sometimes when i open up my computer it says something like your date is set to (i forgot the exact date but the year is 2001) so i change it back to the correct time and date, im not sure how i got the bug, can anyone help me fix this problem, its beginning to be annoying. thanks in advance!!

    Sherwin,
    Those symptoms indicate that you need to get your backup (PRAM) battery replaced.If your computer does not retain parameter RAM (PRAM) settings when it is turned off, this generally indicates that the battery needs to be changed.;~)

  • Region and dialog return bug in JDEVELOPER 11.1.1.1.0

    SomeOne know hot to fix this bug...??
    http://adfbugs.blogspot.com/2009/08/region-and-dialog-return-bug.html
    ADF_FACES-60058: Attempt to re-register component with different model.
    Cause: An IllegalStateException occurred.
    Action: Contact Oracle Support Services.
    Level: 2
    Type: INCIDENT_ERROR
    Impact: Logging
    I have trying and trying and trying to solve this but didnt get a fix....

    John Stegeman wrote:
    The comments in that blog seem to indicate it was fixed in 11.1.1.2 - so two choices for you:
    1). upgrade
    2). File a support request and ask them to backport the fix.
    Since there is a bug filed with support, you can just contact them to see what the current status is.
    Johnas i heard from August 1, 2011 Oracle has stopped supporting 11.1.1.1.0 ......only 11.1.1.2 or later is supported (or may be they told us this to FORCEFULLY upgrade :P)
    so upgrade would be better choice.
    Zeeshan

  • [svn:osmf:] 12425: Extending unit tests, and fixing a bug.

    Revision: 12425
    Revision: 12425
    Author:   [email protected]
    Date:     2009-12-03 04:22:59 -0800 (Thu, 03 Dec 2009)
    Log Message:
    Extending unit tests, and fixing a bug.
    Modified Paths:
        osmf/trunk/framework/MediaFramework/org/osmf/metadata/CompositeMetadata.as
        osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/metadata/TestCompositeMetadata.as

Maybe you are looking for