Taxes and other pricing elements in Procurement orders.

Dear Friends,
Pl explain me how to cover taxes and other purchse (pricing) conditions in procurement orders in sap mm implementation.
Awiting for your valuable input.
Thanks & Regards,
Pratap.

Hi,
You need to configure the complete tax and pricing procedure in SPRO.
Please goto http://www.help.sap.com and find the steps.
Cheers,
Saish

Similar Messages

  • Bug - Wholesale AND Retail pricing bug on one order?

    Hi,
    Has anyone else had this issue? SA wholesale customer has done an order on our website where:
    1) They have logged into wholesale zone and have wholesale pricing applied
    2) Their order has some products in wholesale pricing but ALSO some pricing in consumer / retail pricing.
    3) They chose a retail shipping option yet they are a wholesale customer and should have seen different shipping rates.
    Getting worried about BC - this is a really serious issue. Surely the order wouldn't be able to process as wholesale AND retail pricing on one order? Surely as a wholesale customer they should only see wholesale shipping?
    Any know a fix or had this happen to them?

    Hi Silviu,
    The issue is getting worse. Is there any update?
    ISSUE ONE = we are receiving invoices from customers that have a mix of consumer and wholesale pricing when the customer is ticked as 'wholesale'
    ISSUE TWO = some wholesale customers have no tax on their orders (yet we have the destination state option on our checkout page that adds on tax) and they should be paying tax * Not charging people tax is illegal and we can be fined by the ATO! People even end up in jail for not paying tax.
    ISSUE THREE =some wholesale customers have 1 item with tax on their orders and the rest without tax (also using destination state option).
    I've checked the pricing of the items and they are correct.
    I've checked the wholesale customers are marked wholesale and they are.
    I've checked the tax codes and they are correct.
    I can't understand how one item can have tax and others can't when the customer is a wholesaler so tax should get added and pricing should be wholesale.
    Can you please escalate this. Doesn't BC understand this is a serious issue??

  • Production and Other Overheads posting to Production Orders

    Hi All,
    I need a clarification regarding Production Orders,
    I have created a PP Production for 10 finished qauntity, I have posted material consumtion to the order in MB1A Tcode with 261 movement type.
    But how to post actual cost to the order. From HR Module, Salaries GL are getting upldated, Out of that some of the employees related plant.
    Saleries cost and other activity cost( Actuals), how can i allocate to Production Orders and on what basis.
    Please advice me in this regards, let me know if i am thinking in wrong way.
    Regarsd,
    Ganesh

    Hi,
    u can allocate salrary cost ect to production orders.
    first of all salary should be a primary cost element.
    u can allocate on the basis of hours or any other relevant factor , the factor should be available in ativity type list, other wise u have to create activity.
    in the cost center assessment u can use salary cost element and settle on prodcution orders , u can manully enter amount or u can decide to allocate based on activity quantity in order to do so ur settlement profile must allow posting on production orders..
    points if information useful
    Rajesh

  • Update Pricing elements for sales order item

    Hello All,
    I want to add few manual pricing elements to a sales order item through code (the pricing elements to be added will be determined dynamically). Is there any BAPI  or user exit to update the same?
    Regards,

    Hi
    You can use the BAPI_SALESORDER_CREATEFROMDAT2 for creating  the sales order.Using this you can populate the pricing conditions for sales order. To pass the Pricing conditions use the str ORDER_CONDITIONS_IN & ORDER_CONDITIONS_INX in BAPI.
    Regards,
    Raghu.

  • IOS TextInput cursor and content show through title bar and other UI elements

    When a form is contained within a scroller, it is possible to scroll the content whilst the softkeyboard is displayed and the input element retains focus - on iOS, this causes the cursor and the text to show through UI elements on iOS such as the titlebar content.
    Has anyone come up with a workaround or knows whether this is fixed in Air 3/ Flex 4.6?
    Thanks,
    Dan

    Hi,
    Thanks for posting and sorry for the slow reply.
    Your suggestion will only make a difference on Android - iOS had this bug in 4.5.*, so reverting to the older skin will make no difference on this OS.
    Adobe suggest not scrolling forms if you want to support iOS or use the new StageText features - the suggested workaround of wizard forms is unacceptable for my use case and a scrolling form is a common UI pattern on mobile, so I'm experimenting with the following:
    1. Use CSS to apply the old TextInputSkin
    2. I monitor the soft keyboard events and maintain a 'isKeyboardVisible' property in my views.
    3. I register event handlers on the scroller viewport and set stage.focus to null if my keyboard is currently active and the user attempts to scroll.
    This works and prevents the artifacts from showing through the UI, I just need to find the perfect events.. property change is no good, so I'm playing with mouse and touch events.
    Regards,
    Dan

  • Adobe seeking feedback about panels, palettes, workspaces, and other UI elements

    Several folks within Adobe are discussing the user interfaces for our various applications, and we'd like your feedback.
    Do you use After Effects, Premiere Pro, Photoshop, Illustrator, and Lightroom? Other Adobe applications?
    If so, please post your comments on this forum thread comparing your experiences with the user interfaces of these applications.
    Regarding the panels, palettes, workspaces, and overall UI paradigms in these applications: What do you like? What do you hate? Do you care that the applications are different in this regard? What differences do you even notice?

    Primarily using AE/PP with often PS as well, some illustrator.
    I don't think the UI itself -- panels palettes workspaces etc -- need much work, they are overall greatly improved in the last 5+ years & for the most part much ahead of competition. More attention should probably be put into other items that need improved, many of which already came up listed here.
    One thing, I wish text brightness was added as customizable as well as the UI slider; I don't like the text brightness on the lower and higher end of the slider, wish I could customize it.
    BUG since as far as I can remember, maybe CS3 or earlier: workspaces need to remember multiple monitor setups!
    The problem is, I snap off my timeline into a separate window, and make it full screen.
    Now, if have an explorer/finder window open on the screen where the project & monitors panels where, everything opens fine & my full, double screen layout opens just as I left it.
    However, if I open the project from the monitor that say, my full screen timeline is in, the project/monitor panels etc come up in that same screen, undernearth the timeline.  So I have to nudge the timeline window down, and double click the primary premiere pro window, and for some reason that maximizes it to the other screen).  Then bring my timeline window back into place.
    For this reason alone I kind of like making a single window layout that's just 2-screens wide (Avid-esk), however, I run different resolutions on the monitor and this really complicates things if I'm trying to use all of my screenspace, when two or more monitors have different heights for resolution.  Also, in this setup, all progress windows appear right in the middle, so it's split between the two monitors.  This could be improved.
    Another request would definitely be to make hotkeys and things like timeline navigation more universal among your apps.  I run Avid+custom setup on my hotkeys in PP--I jump into AE, and every last button is different, and in AE it's not nearly as easily customizable. Same for Encore's, etc.  I'd LOVE for a change in PP's hotkey to reflect how it works in AE, Encore, and even PS in video mode, etc.
    Simarly, as mentioned on this forum, I hate how blending mode changes in PS is arrows keys, on AE is shift + or -, and totally manual (mouse--annoying) in PP.  If there's one thing I wished was improved, it would be to make this particular task universal among Adobe apps.
    I also really miss the hotkey property drop downs from AE when in any other program (c for opacity, a for anchor, etc).  I'd love to see them make it into other apps.
    Try not to hide things in the panel's window, coming from "hamburger menu's", I like that CS5 has kept things well enough organized to not have a bunch of important options there that are easy to miss.
    Speaking of buttons, I think you'd find it rewarding to add 'fit to fill' and other fit clip options into buttons. They are extremely hidden right now, because you only see the options if you set 4 in/out points and don't drag/drop, which most users will never do.  Additionally, "solo" & "mute" buttons for audio tracks, which are right there on the audio mixer, just makes sense, add them.
    Another important one is you need to make everything keyboard mappable.  Like in MC, all buttons and actions need to be mappable--just the drop down menus and the few extras you have listed doesn't cut it.  I agree with others here, the keyboard visual layout would be dandy here.
    Definitely a +1 to improving thumbnail views.  Really quite bad right now.  Need much more customization in sizes thatn just 3 sizes, and a thumbnail + info view (like script view in MC) makes it so you can both see and sort the info, and see the clip at the same time, which is ideal for me.  Be able to customize the thumbnail, maybe a special type of marker that's put in from the preview window?
    Hope this helps.  For the most part the UI's are really great; it's the thing that most other NLE users are complaining about in their software, not Adobe users.  Often in their forums I'll see posts comparing things to PPro's UI and pointing out how much better developed it is & that particular app should do something similar to what Adobe did.  In my experience, anyway
    - wb

  • (Windows 8.1) My iTunes takes a while to open, freezes and doesn't recognize any apple device plugged into it.  I've uninstalled iTunes and other software components in the order I was told but still end up with the same result.Why is that?

    Why is iTunes for Windows 8 (8.1) taking so long to boot up, not recognizing an apple device and freezing after a proper uninstall and reinstall?

    Hmm....I just had another thought.  All the machines are running Win7 SP1, BUT the 2 that can sync with MSE installed are 32bit versions, however the one that can't is 64bit.  Not sure if that makes any difference though.  All are clean installs with Win7SP1 media, not SP1 installed later.

  • Downpayment should not be more than PO Value including tax and other charg

    Hi
    when we create a down payment request thru F-47, it checks on basic amount ,but we want it checks with total PO value and at the same time for all po line itmes. How is possible. please help.
    Regards

    Dear Avinash,
    We had the same issue.
    There is no standard configuration in SAP because system  throws error when the net value in PO is exceeded.
    But your requirement is when Gross value (Net Value + Freight, legalization charges etc) is exceeded the system should throw the error.
    We had to take help of our ABAP team to create user exit.
    They added a break point with the logic of throwing error when Gross value is  exceeded.
    It worked for us.
    Regards
    Saurabh

  • Cross Hairs only on Burn Tool and other Brushes (Elements 8)

         Today I sat down to continue work of files I created in Yosemite and Sequoia National Parks a short time ago.  As part of the process I often use tools such as dodge, burn, healing brush, stamp tool etc.  For some reason the size of the indicator is always the cross hair and bulls eye you normally get when you select a brush size that is very small.  (small pixel amount)  It doesn't matter what size you select to work with, the same indicator appears.  I am used to working with a circle indicating how much of the image will be affected.  Without this you have no idea what the scope of your corrections will be.  I don't remember making any changes that would cause this problem.  Can anyone help? 

    Everyone does, because everyone does it.

  • Tax Procedures and MM pricing procedures

    Currently when creating a PO under the invoice tab you can input the Tax code and jurisdiction code.
    The tax code I am using is set up for a Canadian Tax procedure (TAXCAJ).
    The procedure is calling two tax condition types JC1E (GST) and JC1I (PST). They are both condition class D and they are the same accross other statistics but they differ in condition category. JC1E is condition category 1 and JC1I is condition category 2.
    JCIE uses account determination VST while JC1I uses NVV. JC1E needs to be posted to a seperate account as it is partially recoverable.
    The real underlying issue here is that tax condition type JC1I comes accross to teh MM condition tab under NAVS but JC1E does not. I need the value from JC1E to come over to the conditions tab as my PO print is driven by this.
    Any ideas how to get tax condition type JC1E (or its value) over to the conditions tab. I can make JC1E come over with JC1I but i need JC1E seperate. If you need clarification or more information just let me know.

    Hi,
    NAVS condition collects the non-deductible portion of the Tax Code and hence only showing JC1I which is a non-deductible condition type.  The logic behind this is non-deductible tax is part of cost, so for updating the stock account at the time of GR with base value + discounts and other pricing conditions + non-deductible tax, NAVS condition type is being used in PO pricing procedure.  JC1E is a deductible type tax and as not being a part of cost it is not updated in NAVS and hence the stock account at the time of GR.
    If you want all the tax amounts for PO printing purpose, use JEXS condition type and insert this at the last of the pricing procedure with statistical indicator.  Modify your print program to print value against JEXS instead of NAVS.
    regards,
    mallik

  • Help! $42 vague surcharge in addition to gov and other fees!

    Help!... I just got my first bill and in addition to all the plan fees, government fees, taxes and other surcharges, is a vague Verizon surcharge that raised by bill by 33%. My bill went from an outrageous 112.00 to an outrageously egregious 154.00! 154.00 a month for limited talk and limited data! How could I have comparison shopped if they slip a vague charge like that in? Of course, there is no customer service link anywhere to contest this.
    A - How do I contest this?
    B - How do I early terminate this contract before it bankrupts me?
    Please help, my wife and I may have to eat cat food to pay for this plan... and my wife hates fish.

    Bill Period: September 09, 2012 - October 08, 2012 Need-to-Know Information | Explanation of Charges  
    Previous Balance
      $0.00 
    No Payment Received
      $0.00 
       Balance Forward 
    $0.00
    Monthly Access Charges     Important    
    Monthly access charges for new accounts or existing accounts with recent plan changes may reflect a prorated (partial) month's access in addition to charges for your next month of service. Your next month's bill should be closer to what you were expecting provided there are no changes to your account. For more information, Go to Charges by Line.
    $101.99
    Usage Charges     Important     
    In some cases, changes made to your account during a billing period may result in prorated (partial) charges and prorated allowances. You will receive a full month's allowance next month, if you don't make any additional service changes to your account. Usage charges can occur if you exceed a full or prorated allowance(s) during the billing period. Go to Charges by Line page.
    Voice   
    The "Voice" section of your bill Includes charges for voice calls, including calls that exceed your Plan's minute allowances, 411 Search, Long Distance and other calls.  
    $0.00
    Verizon Wireless'              Surcharges and Other Charges & Credits   
    Verizon Wireless Surcharges - Includes charges to recover or help defray costs of taxes and of governmental charges and fees imposed on us by the government. Other Charges and Credits - includes charges for products and services, and credits owing. More Information
    $42.63
    Taxes, Governmental Surcharges & Fees   
    Includes sales, excise and other taxes and governmental surcharges and fees that we are required by law to bill customers. More Information
    $9.40
    Total Current Charges   
    Includes all charges for your current billing period. It does not include past due charges.  
    $154.02
    Total Charges Due by November 03, 2012
    $154.02

  • It is a suggestion on Adobe Dreamweaver:  Could you change the setting of the page or template; to a free platform?  example; move: images, tables and other elements all over the place covering the page. in order to facilitate the user in the design envir

    It is a suggestion on Adobe Dreamweaver:
    Could you change the setting of the page or template; to a free platform?
    example; move: images, tables and other elements all over the place covering the page. in order to facilitate the user in the design environment.
    free
    Thank you for your attention

    Adobe has been trying this and the product is called Muse ( Web design software | Download free Adobe Muse CC trial ).  It doesn't give you the control over the code that most developers prefer but it could help bridge the gap for design if that is what you are looking for.

  • Free Goods Import Process with Customs, Freight, and Other Taxes.

    hi,
    I have to import free goods but have to pay for Customs, Freight, and other Taxes.
    1. If I tick Free Goods Indicator in PO Line Item, Condition Tab at line item disappears. It will not to calculate other conditions at Header level also. - So I cant execute this option.
    2. If i take price of material and insert Condition Type: R001:Discount/Quantity with material price/qty, then it gives Error Message - "Price Must be greater than 0".
    So, Is there any way through which I can procure Free Goods and can maintain conditions for Customs, Freight, and other Taxes in Purchase Order.
    Please help me in this regard.
    - Jignesh

    Hi,
    1) Create an import PO in ME21N with material price and all custom duty conditions (as you normally create). no need to put free tick indicator.
    2) Process MIRO for goods and delivery costs simultaneously.
    3) Maintain zero amount for goods item and actual values for the duties (Ensure selection of goods item including delivery cost items)
    4) Save the LIV document
    5) Check PO item history got updated with IR-L and DCIn. (IR-L will updated with zero amount)
    6) Do  MIGO w.r.t. IR document number.
    7) GR FI document will get updated with the non-set off duty values only.
    Regards
    Rajesh

  • Different  Pricing Procedure for Sale order and Billing Document

    Hello Experts
    As per scenario,we create Excise Invoice (T-Code J1IIN) on Basis of Proforma Invoice.Proforma Invoice and Excise Invoice follow Pricing from Sale Order.AS per pricing Some excise condition types are get update in Proforma and excise Invoice.
    AS Per Customer Payment Confirmation we Create Export Billing Invoice (T-code VF01) on basis of Outbound delivery.
    Issue -: AS per export Billing Rule we don't want to update Excise Condition type in Export Billing Document,and at same time it should not create any accounting entries for same condition type. we Dont want excise Duity in Export Billing Document as Export Billing Doccumnet aslo Follow Pricing procedure of Sale order
    Should i create new Pricing procedure or what other things to solve above issue.
    Please help me out
    Thanks and Regards
    Pash@SD

    Hello,
    The key to your requirement can be maintenance of Excise condition type with proper access sequence and accordingly maintain condition record for them.
    You create an access sequence with following access:
    - Country / Plant / PlntRegion / Region / Price grp / Mat.pr.grp / Materia
    - Country / Plant / PlntRegion / Region / Price grp / Mat.pr.grp
    - Country / Plant / PlntRegion / Region / TaxCl1Cust / Mat.pr.grp
    - Country / Plant / PlntRegion / TaxCl1Cust / Mat.pr.grp
    For export maintain condition record based on any key combination, say for
    Country / Plant / PlntRegion / TaxCl1Cust / Mat.pr.grp - Tax % - Tax Code
    FR / 1000 / KR / 03 (EXPORT) / 04 / 0% / V1
    I hope this can assist you.
    Thanks & Regards
    JP

  • Different Tax base in pricing procedure for a single sales order for different line item material.

    Hi,
    I have a scenario wherein in a sales order, for two different material, the tax base of pricing should get triggered on the basis of sold to party and the material entered at line item level.
    Logic triggers on the basis of Region of Customer & a unique field in the Material Master but problem comes in the calculation of Tax base as the sequence of condition type (from – to)  is already defined in the pricing procedure to pick from a particular step but in second line item the base is different i.e. the sequence of condition types that are maintained in pricing procedure should be different for Tax to calculate differently.
    Kindly suggest if the same can be handled in a single pricing procedure and dynamically taking care of condition type sequence through Alt Cal Base Formula, so far I’ve tried both Alt Cal Formula & Base but it is not working
    Client doesn’t want to go ahead by creating two different orders (through separate Pricing Procedure) for that. They want to have both materials in same order.
    Kindly suggest a suitable way to handle this scenario.
    Regards,
    Aashika Agarwal

    Hi,
    Click on the ''check availability'' button at item overview and then click on ''One-time delivery'' on the top. This will ensure that you will have only one delivery for whatever quantity is confirmed on that date.
    If you want to apply this rule for all orders across a sales area, then you can do the below configuration step :
    SPRO->sales and distribution->basic functions->availability check with ATP logic->Define default settings-> Here in avail. checking rule select A (one time delivery). This will ensure that all orders created for a particular sales area will have only one delivery.
    Hope this helps.
    Regards,
    Palani

Maybe you are looking for