Building Reports from Multiple Schemas

Hi,
I have a DB which contains 15 different schema. They contain the same tables and tables structure , with the data between different schemas being different. The user wants the same report to show data of each instance. I do not want to build 15 physical/bmm Models . Is there anyway this can be done? Please let me know the different options.
Edited by: user599926 on Feb 25, 2010 10:06 AM

Hi
You can build this as 15 Logical table sources and specify as Fragmentation source. Use a logical column to specify condition and combine sources which would work for you. Let us know result.
LG

Similar Messages

Report from multiple subject areas

Hi,
I need to create a report from multiple subject areas. I am not sure whether it;s possible in OBIEE answers.
Is there any other tool from OBIEE suite where I can design it?
Thanks

Yes, i can see datatype and number of columns is same in both queries.
i have challanges to copy message but Error message seems to general. Error says (near to FROM) and I checked there are three FROM in query and all seems to be ok
Query is something like as below
select SA1.col1 saw_0,
SA1.col2 saw_1,
SA2.col1 saw_2,
SA2.col2 saw_3,
FROM
(select col1 saw_0, col2 saw_1 from "subject area1") SA1
FULL OUTER JOIN
(select col1 saw_0, col2 saw_1 from "subject area2") SA2
ON SA1.col1 = SA2.col1
I can't see any issue in the query...please comment.

OBIEE report from multiple facts at different levels

Currently we need to develop a report with columns from 3 different facts surrounded with conformed and non conformed dimensions at different levels.
After setting the hierarchial levels and putting the facts into single logical table with different sources OBIEE is generating 2 different queries and does a full outer join.
I would like to know how we can do a left outer join instead of full outer join between the 2 queries based on a common column?
Thanks in advance.

Hi Vinod,
The scenario provided in the link above doesnt match to my issue.
We need to develop a report from multiple fact tables at different levels with conformed & non conformed dimension columns.
I have 7 dimensions D1, D2, D3, D4, D5, D6 and D7 & two fact F1 and F2 tables.
F1 is tied to dimensions D1,D2,D3,D4,d5
F2 is tied to dimensions D3,D4,D5, D6 and D7.
In my report I have columns from D1, D2, D3, D4, D5, D6, D7, F1 and F2.
So OBIEE generates 2 queries with columns from D1,D2,D3,D4,d5 & F1 measure and another query with D3,D4,D5, D6, D7 and F2 measure.
and then does a cross fact join out of box between 2 queries.
But I need to do a left outer join between the 2 queries on a common column instead of cross fact join. I would like to know how we can achive this.
Thanks.

Build Reports from XML output from Reports

Hi,
I was just wondering if it is possible to build reports from output in XML format, originally generated by Oracle Reports.
The XML output produced by Reports is stored in a database for further processing.
TIA
Hien

Hi Hien
If I have understood this right, you need to create report in XML format from an XML Report Definition File. From the Builder, Generate to File from the File menu and choose XML format for the output.
Remember that XML output from Reports is Data driven and faithfully reproduces the Data Model. It is NOT layout driven.
Regards
Sripathy

How do I select from multiple schema's

How do I select from multiple schema's
Tried:
SELECT * FROM schema1.table1, schema2.table2
WHERE schema1.table1.column1 = schema2.table2.column2;
Errored......

Thanks
We finally got in touch with our DBA and he said the same thing.
SELECT t1.*,
t2.*
FROM schema1.table1 t1,
schema2.table2 t2
WHERE t1.column1 = t2.column2;
I'll try it afther I finish a task my boss just gave me.
BRB then.

Building index from multiple master and child relationship tables

Hello,
My question is:
Is it possible to create the index for master and child tables?
If yes, can you please point me out to any links or give me an example.
Actually i just followed this below link to create the index using multiple tables
Building index from multiple tables for text search
I am able to create the index using above link,but problem accured , when i search for one master data column value then it is returning many rows with same master data for each child row.
for example
SELECT
a.conc_program_name,
a.conc_program_desc,
b.param_name
FROM a_master a, b_child b
WHERE b.report_dtls_id = a.report_id
AND CONTAINS (a.dummy, 'PAY') > 0
Which retruns
PAY Master A
PAY Master B
PAY Master C
Please let me know is there any way i can restrict this to single row with concatination of child data like
PAY Master A B C
Another doubt is ,i have the column value like p_consolidation_set_id,when i give this in CONTAINS (a.dummy, 'p_consolidation_set_id') > 0 ,then not able to get the any results.
please let me what shall i do for this issue.
Thanks
Message was edited by:
user496798

There are various ways to concatenate the values. One nice generic solution is to use Tom Kyte's stragg function:
http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:2196162600402
If p_consolidation_set_id is a variable name, not a value, then do not put quotes around it.
Message was edited by:
Barbara Boehmer

SELECT from multiple schema's

How do I select/insert/update/delete from multiple schema's.
Tried:
SELECT * FROM schema1.table1, schema2.table2
WHERE schema1.table1.column1 = schema2.table2.column2;
Errored......

Hello
you need to use an alias for each table
tylerd@UAT51> select dual.dummy from dual, dual
2 /
select dual.dummy from dual, dual
ERROR at line 1:
ORA-00918: column ambiguously defined
tylerd@UAT51> select dual_1.dummy,dual_2.dummy from dual dual_1, dual dual_2
2 /
D D
X X
1 row selected.

How to create a report from multiple dynamic XMLs

Hi,
I'm trying to build a consolidated report that gets data from multiple XML files and each XML file is different. Although the presentation of the data will be similar, the contents of the XMLs will vary and the number of XMLs to merge will also vary.
What I would like to understand is the following:
* Is it possible to generate a report template based on dynamic columns where the column names, their format and number is different for each business object?
* Is it required to generate an XML with the entire data or can the template read information from different XML files? and if so how it can be done. Please notice that the formatting of each XML may be different.
* Is it possible to use the services to generate the reports directly? Something around these lines was mentioned in one of the sessions but it was also mentioned that it's still WIP.
I've been using the standalone version and although I can get the desired result, I couldn't merge data from multiple XMLs.
Is the new BIP version available, or an enterprise version that I can use?
Thanks in advance,

Hi Rich,
Even i had a similar kind of problem. I wanted to fetch data from BI through the XMLA Connector which are created in Query Designer and then i wanted to fetch these fields and rearrange them and put it in a report format by colouring certain fields. Can the same can be done in WebDynpro.

Building report from PL/SQL cursor

Hello,
is there any way to build APEX report using just PL/SQL cursor?
I don't have grant to SELECT from views or tables, but I can use some functions returning row types and cursors. I know I can use them to build table from scratch with htp.p etc., but it’s not very nice. I want to do it using APEX reporting with filtering and pagination functionality.
Is it possible?
Regards,
Przemek

Apologies for the delay, I was out of the office.
Below is a package serving as the basis for creating a view based on a pipelined function. The package is just a skeleton and will not compile in its current form, you will need to go through it filling in the blanks as described by the comments.
If you want some control over what rows are returned by the view from a larger result set, use the set_parameters function in the WHERE clause, E.G.:
select * from really_big_complicated_slow_view where 1 = view_pkg.set_parameters(something_that_reduces_the_view_result_set_size);
Or, a more concrete example:
select result_text from view_to_convert_to_csv where 1 = view_pkg.set_parameters(pi_table => 'my_table', pi_where = 'whatever');
In the spirit of full disclosure, I got the idea for using the "set_parameters" function in the view WHERE clause from a post or blog somewhere a couple of years ago but have lost track of who actually deserves the credit for the good idea.
-Tom
create or replace package demo_vw as
-- Package to serve as the basis for a view based on a function
-- Customize this record so that it represents a row from this view...
type row_type is record (
-- record fields here
type table_type is table of row_type;
-- This function is used in the DDL to define the view, for example:
-- create or replace view my_view (col1, col2, ..., colN) as
-- select * from table(my_view_vw.get_view);
function get_view
return table_type
pipelined;
-- Customize this function header to accept the parameters for this view, if
-- any. If this view does not require any parameters, the set_parameters
-- function may be deleted.
-- This function should always return 1 and is called as follows
-- select <whatever>
-- from my_view
-- where 1 = my_view_vw.set_parameters(p1, p2, p3, ..., pN);
function set_parameters (pi_whatever1 in whatever,
pi_whateverN in whatever)
return number;
end demo_vw;
show error package demo_vw
create or replace package body demo_vw as
-- Customize this list of private global variables to match the parameters
-- required by the view. These variables are set, reset, and validated by
-- set_parameters, reset_parameters, and valid_parameters respectively...
g_var1 whatever;
g_varN whatever;
function set_parameters (pi_whatever1 in whatever,
pi_whateverN in whatever)
return number
is
-- Customize this function header to accept the parameters for this view, if
-- any. If this view does not require any parameters, the set_parameters
-- function may be deleted.
-- This function should always return 1 and is called as follows
-- select col1, col2, ..., colN
-- from my_view
-- where 1 = my_view_vw.set_parameters(p1, p2, p3, ..., pN);
begin
g_var1 := pi_whatever1;
g_varN := pi_whateverN;
return 1;
end set_parameters;
function valid_parameters
return boolean
is
-- Customize...
-- Assumes that set_parameters has been called to set the value of the view
-- parameters.
l_valid boolean := true;
begin
return l_valid;
end valid_parameters;
procedure reset_parameters
is
-- Customize...
-- This is called at the end of the get_view function to reset the view
-- parameters for the next caller.
begin
g_var1 := null;
g_varN := null;
end reset_parameters;
function get_view
return table_type
pipelined
is
-- build and return each row for the view...
l_row row_type;
begin
if valid_parameters then
-- do your process to populate the l_row variable here...
pipe row (l_row);
end if;
reset_parameters;
exception
when others then
reset_parameters;
raise;
end get_view;
end demo_vw;
show error package body demo_vw
create or replace view demo
as
select * from table(demo_vw.get_view);

Building report from more than one data model

Hi Experts,
I have a requirement to build a report in BI Publisher.
The report has three section each having their own data source.
When i try to create report in BI Publisher it allows me to associate one data model per report.
is it feasible to have more than one data source for a single report.
Cheers,
Andy

Hi Andy,
Not sure If this meets your requirement, please do have a look at the following links:
http://www.rittmanmead.com/2008/04/24/bi-publisher-reports-with-multiple-data-sources/
http://blogs.oracle.com/xmlpublisher/2008/07/multiple_datasources_i.html
http://blogs.oracle.com/xmlpublisher/2008/07/multiple_datasources_ii.html
Thanks.

How to run Report Builder Report from Command line

Hello,
Can Oracle Report Builder Report (run time report) run from Command line ( SQL prompt or Shell script).
Quick response will be appreciated.
Thanks,
Atif

Hi Atif,
please see Note 74648.1 on Metalink.
Monica

How to run report from multiple user same time

Hi,
We are using oracle database 11g R2
Oracle Forms & reports : 11.1.2
O.S : Windows & Professional
We have install oracle database, Oracle forms & reports in server. Near about 25 users are accessing that database, forms & reports from server through browser.
I have one problem, when users runs a report there report goes in queue and runs one by one in FIFO manner.
If one user has a report that take long time other users has to wait for that time.
Can it is possible to run reports in multitasking manner, i.e multiple report can be run simultaneously.
http://servername:7001/reports/rwservlet/showjobs?
Using above url am able to see jobs in queue.
Thanks in advance.

Hi Denie,
I am new to it and don't know how to add engines to server.conf , can you please tell me how to add engine to it.
I search server.conf file but i did't found it.
Please help..
Thanks in advance.

BAM report from multiple systems...

Hi guys, just wanted to know if we can actually get the data from multiple systems and then generate a BAM report on those data??.Is it possible? and if so then can anyone show me the way.
many thanks,
Rajesh.

One option is create external data sources, though Oracle recommends that you only use these for data that does not change very much (since it does not go through the ADC, instead must be continually polled). http://docs.oracle.com/cd/E25054_01/dev.1111/e10224/bam_extl_data_sources.htm#CIHJFDAG
Another option is to create a simple BPEL composite that picks up the data from the various systems and sends it to BAM. In general, BAM is more efficient when data is sent to it, not when it has to get the data. (there are also other options including JMS, etc.)

Fatch data in ALV Reports from multiple Tables

Respected Sir,
How to fatch data in ALV Grid report from selected Field and selected Table.
Please Help and My require Field and Table is :
sono LIKE vbak-vbeln,
       sodat LIKE vbak-erdat,
       cust LIKE kna1-name1,
       pono LIKE vbkd-bstkd,
       podat LIKE vbkd-bstdk,
       item_no LIKE vbap-posnr,
       item_des LIKE vbap-arktx,
       name LIKE vbak-kunnr,
       pdate LIKE vbak-bstdk,
       acdel LIKE lips-lgmng,
       netweight LIKE likp-ntgew,
       ordval LIKE VBRP-netwr,
   CUST_MAT_NO LIKE VBAP-KDMAT,
       order_qty LIKE vbap-kwmeng,
       desp_qty(5) TYPE p DECIMALS 2, "LIKE lips-lfimg,
       balance(5) TYPE p DECIMALS 2,
       delv_no LIKE likp-vbeln,
       delv_dat LIKE likp-bldat,
       invoice LIKE vbrk-vbeln,
       exnum like J_1IEXCHDR-exnum,
       invoice_dat LIKE vbrk-fkdat,
       invoice_val LIKE konv-kwert,
       END OF it_out.
*Please Refere the following code and if u wnt to change at ur own ieda u can change and reply me back.*
*Thnaks In ADVANCE.*
*Please Do need full it.*
*Bhavesh Panchal*
*Baroda*
Also I Make Reports For SO : full coding is.
*& Report Z_NEW1
REPORT Z_NEW1.
TABLES : vbak,    "Sales Document: Header Data
         vbkd,    "Sales Document: Business Data
         likp,    "SD Document: Delivery Header Data
         vbrk,    "Billing Document: Header Data
         konv,    "Conditions (Transaction Data)
         lips,    "SD document: Delivery: Item data
         vbap,    "Sales Document: Item Data
         vbrp,    "Billing Document: Item Data
         kna1,    "General Data in Customer Master
         J_1IEXCHDR.
DATA : i_vbak LIKE vbak OCCURS 10 WITH HEADER LINE.
DATA : it_vbkd LIKE vbkd OCCURS 10 WITH HEADER LINE.
DATA : it_likp LIKE likp OCCURS 10 WITH HEADER LINE.
DATA : it_vbrk LIKE vbrk OCCURS 10 WITH HEADER LINE.
DATA : it_konv LIKE konv OCCURS 10 WITH HEADER LINE.
DATA : it_lips LIKE lips OCCURS 10 WITH HEADER LINE.
DATA : it_vbap LIKE vbap OCCURS 10 WITH HEADER LINE.
DATA : it_vbrp LIKE vbrp OCCURS 10 WITH HEADER LINE.
DATA : it_kna1 LIKE kna1 OCCURS 10 WITH HEADER LINE.
DATA : it_vbrp1 LIKE vbrp OCCURS 10 WITH HEADER LINE.
DATA : it_temp LIKE lips OCCURS 10 WITH HEADER LINE.
DATA : it_lips1 LIKE lips OCCURS 10 WITH HEADER LINE.
DATA : it_lips2 LIKE lips OCCURS 10 WITH HEADER LINE.
DATA : it_lips3 LIKE lips OCCURS 10 WITH HEADER LINE.
DATA : it_vbak1 LIKE vbak OCCURS 10 WITH HEADER LINE.
DATA : it_vbak2 LIKE vbak OCCURS 10 WITH HEADER LINE.
DATA : it_vbap1 LIKE vbap OCCURS 10 WITH HEADER LINE.
DATA : it_posnv LIKE zdelprt OCCURS 10 WITH HEADER LINE.
DATA : BEGIN OF it_out OCCURS 10,
       sono LIKE vbak-vbeln,
       sodat LIKE vbak-erdat,
       cust LIKE kna1-name1,
       pono LIKE vbkd-bstkd,
       podat LIKE vbkd-bstdk,
       item_no LIKE vbap-posnr,
       item_des LIKE vbap-arktx,
       name LIKE vbak-kunnr,
       pdate LIKE vbak-bstdk,
       acdel LIKE lips-lgmng,
       netweight LIKE likp-ntgew,
       ordval LIKE VBRP-netwr,
   CUST_MAT_NO LIKE VBAP-KDMAT,
       order_qty LIKE vbap-kwmeng,
       desp_qty(5) TYPE p DECIMALS 2, "LIKE lips-lfimg,
       balance(5) TYPE p DECIMALS 2,
       delv_no LIKE likp-vbeln,
       delv_dat LIKE likp-bldat,
       invoice LIKE vbrk-vbeln,
       exnum like J_1IEXCHDR-exnum,
       invoice_dat LIKE vbrk-fkdat,
       invoice_val LIKE konv-kwert,
       END OF it_out.
SELECT-OPTIONS: sono FOR vbak-vbeln.
SELECT-OPTIONS: customer FOR vbak-kunnr.
SELECT-OPTIONS: d_date FOR likp-bldat.
   LOOP AT it_OUT.
   select * into table i_vbak from vbak
   where vbeln IN sono.
   sono = vbak-vbeln.
   append it_out.
   modify it_out.
   endloop.
LOOP AT it_out.
      SELECT single vbeln netwr FROM vbak
          INTO (it_out-pono,it_out-podat)
          WHERE vbeln = it_out-sono.
          "it_out-item_no.
     append it_out.
   ENDLOOP.
    select * into table i_vbak from vbak
    where vbeln IN sono.
    call function 'REUSE_ALV_GRID_DISPLAY'
    exporting
    i_structure_name = 'VBAK'
    I_grid_title     = 'Bhavesh Panchal'
    tables
    t_outtab = i_vbak
    t_outtab = it_out
     exceptions
     others = 1.

Hi Bhavesh Panchal ,
You have to create another internal table with fields which you would like to display in the ALV output.
once you fetch the data from different tables into respective internal tables. loop those internal tables and insert the field values to internal table which you want to display in ALV output.
Create field catalog for the internal table created for ALV output.
Hope it shall be useful.
Regards
Santosh Kumaar.M

SQL Report From Another Schema

Is there anyway to select a table from another schema?I have a default schema for my application but i want each user to use their own schema.
I'm looking for something like #OWNER#.table_name but replacing #OWNER# with the name of another schema in the workspace.
Kind Regards,
BgUrsea
APEX 4.0 10g XE

Hello BgUrsea,
you could achieve this by granting the needed privileges (e.g. select, insert, update, delete) on each table in the #OWNER#-schema to your applications parsing schema.
If you can't use a direct mapping (e.g., you can't assign the schema name of a user as usernames for his application user), you probably need a mapping table in your parsing schema. Define an application item (e.g. "F_OWNER") and create a application computation that executes "On New Instance" and does something like
SELECT schema
FROM mapping_table
WHERE owner=v('APP_USER');If you aren't sure you always have a mapping, you might think about an application process that not only computes the value but also handles the action to be performed in case there is no mapping for a user.
But I suppose it could be easier to have a copy of you application for each user and assign the appropriate schema to each copy. That way, you don't need the mapping, you don't need to care about always using the #OWNER# when developing your application, and of course, no user can (not even accidently) access another users (or your default) schema.
-Udo

Building Reports from Multiple Schemas

Similar Messages

Maybe you are looking for