Burn DVD dual +R

Hi-
Can Mac Book Pros burn DVD+R DL ?
I thought I burned one sometime back, but now they all fail.
Thx,
Steve

Thanks.
According to System Profiler, I can burn them (and think I burned at least one in the past.)
This is a TDK pack of 25, and about 6 failed last night.
Drive works, as I can burn CDs and DVDs.
My wife's PowerBook (last one produced) just died, so I'm a little leery.
Especially since I handle this like my life depended upon it.
Thx.

Similar Messages

  • Cannot burn dvd dual layer

    hi there.I want to burn a dmg from snow leopard onto a DL dvd.
    Im able to burn SL dvds with toast 9, or Burn. Im trying to burn a memorex dl + r dl, and I get 2 errors.
    After "preparing" the DL dvd for ages it came out with this message:
    Sense Key = MEDIUM ERROR
    Sense Code = 0x0C
    WRITE ERROR
    and at the very end it came back on me with this:
    Sense Key = UNIT ATTENTION
    Sense Code = 0x29
    POWER ON, RESET, OR BUS DEVICE RESET OCURRED.
    It happened with the app burn as well but no error codes were generated.
    These are the specs for my LG DVD drive:
    HL-DT-ST DVDRAM GSA-4163B:
    Firmware Revision: A101
    Interconnect: ATAPI
    Burn Support: Yes (Unsupported)
    Profile Path: None
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RAM, -RW, +R, +RW, +R DL
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media: No
    These are the specs for my PowerMac G4:
    Hardware Overview:
    Machine Name: Power Mac G4 (AGP graphics)
    Machine Model: PowerMac3,1
    CPU Type: PowerPC G4 (2.8)
    Number Of CPUs: 1
    CPU Speed: 450 MHz
    L2 Cache (per CPU): 1 MB
    Memory: 1.12 GB
    Bus Speed: 100 MHz
    Boot ROM Version: 4.2.8f1
    Serial Number: CK*
    Any help please?
    < Edited by Host >

    I think BB has hit the nail on the head. Verbatim as a brand has a reputation for quality and wide compatibility surpassed only by Taiyo Yuden.
    This may be of interest:
    http://www.digitalfaq.com/reviews/dvd-media.htm
    Michael

  • Power Mac G5 Dual 2.5 GHz running 10.5.8 cannot burn DVD+R

    Hello all-
    I have a Power Mac G5 Dual 2.5 GHz running 10.5.8 and I cannot burn DVD+R. Does that make sense?
    If I insert a DVD+R into the drive, it just spits it back out. I've tried several discs so it's not a faulty DVD.
    Help.
    Thank you.

    I've tried several discs so it's not a faulty DVD
    I trust that is several different brands, not several different discs from the same spindle/pack?
    Media varies.
    http://www.digitalfaq.com/media/dvdmedia.htm
    If you haven't tried a different brand, try a Verbatim or Taiyo Yuden.
    You might also try burning in a new user account to rule out account software troubles.

  • Best External dvd burner for dual layer disks?

    Hi everyone,
    At some point my internal dvd burner in my mac book pro died, and apple replaced it. After that, I couldn't burn a dual layer disk. They've changed it twice more to accomodate me (the genius bar is awesome), but I still only have mediocre results. No problem burning regular dvds or cds. So I wondered is there a REALLy good external burner for DVD-DL that you have experience with? Thanks!

    A good bootable multi-interface enclosure (empty) for an external CD/DVD drive will run about US$70.
    http://eshop.macsales.com/item/OWC/MRSFW8U2RF/
    They also sell SATA drives pre-installed in that same enclosure.
    Many users find installing an internal drive themselves no more difficult than doing a memory upgrade themselves.
    Others prefer not to work inside their computer.
    Based on your graphics card and the original drive, I expect your Mac Pro is an older model. All before 2009 accept an ATA INTERNAL drive such as this:
    http://eshop.macsales.com/shop/superdrive/Mac_Pro_Xeon
    That page also has a video of how to install a replacement DVD drive.

  • Can Adobe Premiere Elements 12 burn a dual layer dvd disk?  If not, which of the components is at fault?

    When I spoke to a person about upgrading from Premiere Elements 10 to 12, I specifically asked if the program could burn DUAL LAYER 8.5 dvds and I was told that it could.  That is the ONLY reason that I upgraded.  Since recording in full HD the files are larger.  I video plays for local theaters. I have been trying to burn a disk that is 7.5GB (2 hours 15 minutes).  I bought RIDATA -RDL 4x 8.5GB disks.  Then had a dual layer burner installed in my computer.  Premiere Element dialog "incompatible disk" The RITDATA says the problem is Adobe, the Geek Squad says the problem is Adobe.
       SO ANSWER THIS QUESTION: Can Adobe Premiere Elements 12 burn a dual layer dvd disk?  If not, which of the components is at fault?  I am trying to burn 18 copies of this video (no copyright infringements) and don't tell me to to divide it into 3 disks.

    drowning
    Can Adobe Premiere Elements 12 burn a dual layer dvd disk?
    Short answer: Yes.
    What are you burning to DVD disc - DVD-VIDEO on DVD disc or AVCHD format on DVD?
    Does your DVD CD burner support double layer single sided discs?
    Premiere Elements is supposed to (been there and done that....)
    1. burn to Folder (8.5) for Publish+Share/Disc/DVD and Publish+Share/Disc/AVCHD
    (you take the VIDEO_TS for the former and BDMV Folder in the latter to a program like ImgBurn
    for the actual burn to the DVD double layer single sided disc)
    2. burn to disc 8.5 GB/240 minutes
    Have you gone the burn to folder Folder (8.5 GB) route?
    Have you tried another brand of disc in spite of by the disc manufacturer and the Geek Squad are telling you?
    A double layer single sided disc is labelled 8.5 GB/240 minutes. In reality, that 8.5 GB is 7.95 GB. Where are you
    coming up with 7.5 GB for your disc? Was that due to typing glitch?
    Please review and consider. Any questions, please do not hesitate to ask.
    ATR
    Add On..Have you updated 12 to the 12.1 Update yet? If not, please do so using the opened project's Help Menu/Update.
    This is not Adobe. Rather user to user.

  • DM4-3055DX DVD-Dual Layer Burner

    I have a DM4-3055DX notebook
    i wanted to burn some home movies and i purchased DVD-R DL - Dual layer DVD to increase the capacity of the DVD to 240minutes or 8.5 gb
    my question is how do i know or find out if my notebook has a DVD-Dual Layer Burner. or supported Dual Layer DVD-Rs
    thank you

    Try this free Nero info tool
    http://www.softpedia.com/get/CD-DVD-Tools/CD-DVD-Rip-Other-Tools/Nero-InfoTool.shtml

  • Just installed 10.4.9 - My LITE-ON DVD burner no longer will burn DVD-DL

    I just installed 10.4.9 (I knew I shouldn't have..) and went to burn a Dual Layer DBD with Toast 8.0.1 and it won't burn -- it recognizes the DVD as D/L - but won't write to it (It thinks it does and immediately says "Writing Lead Out"...but nothing was written.
    I have tried other burning applications, but no go. However, I can burn DVD Single Layers no problem...
    What did 10.4.9 do and how??? I burned some D/L DVDs last night...is this just a coincidence??? Hard to believe it would be...that just after installing 10.4.9 my DVD burner no longer burns DVD D/L!!
    Anyone else have this problem?

    i have a G4 500mhz AGP mac (upgraded to a 1.6ghz processor via a NewerTech card) with an internal CD/DVD player (not burner) and i have an external LaCie CD/DVD burner (the LaCie CD/DVD burner is only about 4 weeks old and i've burned maybe 8 to 10 DVDs on it)
    i have had NO problem reading any DVD disks until just about a week ago.. i had bought a new Graphics DVD and it worked the first time i put it in the DVD player... the second time it would not work... (((this was the start of the problem of the purple-ish DVDs not mounting))) so, i thought i had just bought a faulty DVD, they replaced it and the new one still will not work at all.. the DVD will NOT work in my internal DVD player AND it will not work in my LaCie external DVD burner/player...
    the internal drive just spins for a few minutes and the kicks the DVD out... the external LaCie drive spins for several minutes, then i finally get a message saying the disc is not readable.
    what i have noticed is that any DVDs i put in will mount as long as they have a silver surface.... if the surface is purple-ish color, those are the DVDs that will not mount and keep ejecting
    even DVDs that i have burned on the external LaCie DVD burner will not mount in the internal drive OR the external drive...
    as i said, all of the DVDs that will NOT mount are the one's with a purple-ish surface... maybe that has something to do with the problem....
    something must have happened somewhere because these purple-ish DVDs did used to work... i even did a brand new install of OS X.4 on a totally seperate hard drive and these purple-ish DVDs STILL would not work...
    even booted into MacOS 9.2.2 and the STILL would NOT mount....
    ANY info would be helpful...

  • DVD drive does not recognize burned DVD

    Test DVDs are recognized on other G5 DVD drive. Problem has been intermittent but now constant. This one just spits them out. It does recognize blank DVDs and CDs. HD permissions repaired. Profile info below
    ATA
    SONY DVD RW DW-U10A:
    Model: SONY DVD RW DW-U10A
    Revision: A43h
    Serial Number: EA4CEA71
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    Disc Burning
    SONY DVD RW DW-U10A:
    Firmware Revision: A43h
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 8192 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media: No [this with burned DVD in drive]

    Hi there. count me in on the Sony DVD problems. My Dual 2 GHz PowerPC G5 will not recognize the Adobe Creative Suite 3 DVD for installation. The DVD works fine in other G4 systems.
    The DVD drive will recognize data CD's but this Adobe DVD just churns and hums for 30 seconds and then the drive ejects the disk.
    DVD Laser Lens Cleaner from Radio Shack will not load either.
    This is the drive:
    SONY DVD RW DW-U21A:
    Firmware Revision: AADB
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media: No
    After reading the boards, it sounds like the Pioneer DVR-112D 18X DVD Burner (Drive only) is the unit to buy and replace this Sony one.
    There appears to be a spacer issue related to the door on the G5 Tower case. Will the spacers from the Sony unit work on the Pioneer unit, or can the Pioneer unit just be installed as is using the existing ribbon cable. I've read the PMG5OpticalDriveDIY.pdf replacement manual, but am confused about SuperDrives vs. the Pioneer DVR-112D.
    Can anyone clarify the details of replacement?
    Also, will I need new software (Roxio, Toast) to burn CD's and DVD's after replacing the drive?
    thanks, and best regards,
    Eric

  • I'm unable to burn DVDs on my MacBook Pro 2.16 GHz, 2GB 667 MHz DDR2 SDRAM

    Hello all,
    I'm unable to burn DVDs on my MacBook Pro 2.16 GHz, 2GB 667 MHz DDR2 SDRAM running 10.4.8. When I go to burn a DVD I get one of two codes 0X8002006D, 0X80020022, why is that a 3,000 CPU cant burn a DVD. My Mac is total up to date with all software and firmware. I saw in the Discussions that I'm not the first person to have this issue but I don't see an answer from Apple, I'm pretty sure it not the DVDs (Memorex DVD-R 16X) because my ****** pc can burn them and it was a 100 pack that I used about 50 from it that I burn on both Macs and the ****** PC. I also have a Dual 2 GHz PowerPC G5 with 2.5 GB DDR SDRAM running 10.4.8 which is also unable to burn them and it also comes up with the same errors. I have not had this issue until I updated my Macs to 10.4.8, PLEASE HELP.
    Thanks,
    Coons

    Yes I can play CDs and DVDs but I was not able to burn a 4.01GB folder, I have since decreased the folder size to 3.75 and was able to burn the DVD. I'm creating another just to double check, my G5 was unable to complete the task and I also gave a shot at a 2.77GB folder and it failed I also gave a 200Mb file a chance but it still did not burn. I was able to burn the same 200MB file on a CD, PLEASE I NEED HELP.

  • Video "jigsaw" artifacts appear when camera pans on burned DVDs

    I've been pulling my hair out for days as I export endless new sequences at different settings and then burn DVDs, only to find that the problem does not go away. The issue is the infamous "jigsaw" artifact effect, or whatever you want to call it, meaning that when viewing the resulting DVDs, when the camera pans, images "tear" and kind of spazz out. This seems most noticeable when panning past straight vertical objects, but is not limited to only this circumstance. My suspicion is that this is all the result of an interlacing issue in iDVD, but I have certainly learned that I am capable of overlooking the obvious or being wrong. What I don't understand is that with all of us out there working on Avids and using iDVD, either there does not seem to be a unified ideal export setting that resolves this issue, or I am having a comparatively unique problem. The shame is that most of the DVDs are looking great, and it is only this one issue that is sabotaging completion of this project. I'm at my wits end, so any and all knowledgeable help is supremely appreciated. Help me keep my hair.
    When viewing any of these exported clips within quicktime player, the jigsaw is not visible. But when viewing the burned DVDs on my Mac, the jigsaw is visible.
    When viewing the burned DVDs on my Panasonic HDTV (TH-42PX75U) the jigsaw is visible. When viewing the burned DVDs on my Sony Trinitron Production monitor (non HD), the jigsaw is visible.
    Avid Software: Avid Xpress DV 3.5.0
    Editing system info: Mac G4 "Mirror door" model - Dual 1.2 Ghz PowerPC - memory 1024 MB
    OS Software on Editing System - OS X version 10.2.3
    Quicktime version on Editing system: QT version 6.3
    Software used to burn DVDs: Idvd 8 version 7.0.1
    Computer used to burn DVDs: MacBookPro3,1 - Intel Core 2 Duo 2.2 GHz (codec downloaded from Avid and installed - prior post about video not displayed in QT exports was due to missing codec)
    Quicktime version on Computer used to burn DVDs - QT Version 7.4 (92) (with Pro upgrade)
    DVD media used: TDK DVD-R 8X 4.7GB
    Info on sequence I am burning - A 1 hour and 50 minute program of African wildlife footage all shot on regular mini DV tapes. Camera used was the Panasonic AGDVX100A on the 24 frame setting that does not require a software fix (the correction is done in camera). All the footage was digitized using this camera. When viewing any of these exports afterward within quicktime player, the "jigsaw" is not visible. It only becomes visible after burning them and then watching the dvd. All burns in iDVD 8 are using the "professional" burn mode.
    Export settings from Avid and iDVD 8 result summary -
    1) Exported at "same as source" from Avid yields arguably the absolute worst result, as I rather suspected with the whole field / interlacing issue, but I was feeling hopeful.
    2) Trying to bypass Quicktime by using "dvstream" as the export setting also yields a very poor result. This jigsaw problem does not occur, but the resulting image is terrible. Very milky blacks, the compression is worse, as in much more noticeable, than any other export, and the image is soft and thin looking, rather anemic, and it ruins the visuals completely. What is a bit odd to me however is that I had been using dvstream to burn DVDs of other projects for years on prior versions of iDVD and it never seemed to be a problem. As I tried this one first, without having the Avid codec installed in my MacBook (which I use to burn as I can run iDVD8 on it, also meaning that trying quicktime reference is not an option, I must export, then move the completed export to my macbook pro), I am currently exporting it one more time to see if installation of the codec fixes the horrible compression and color result, but I am not hopeful at all.
    3) Tried using an Avid forum suggestion that recommended using 720 X 480 - crop/pad - RGB color levels - even (lower field first) - native dimension 720 x 480. No good.
    4) Another Avid forum suggestion to try the "Animation" setting for video
    instead of "Avid DV" is not a viable option. The infamous "2 GB limit" message
    comes up as the export nears completion and aborts. This message does not appear
    with any other export setting. When cutting my sequence in half, the same problem occurs. Even if I could get it to work, the result would be useless if it meant I had to send people several DVDs of the program chopped up into little bits.
    5) Heres a summary of other export attempts all using Quicktime movie and "Avid DV" for video, keeping in mind the info I read about how at least one version of iDVD had the field order (ntsc vs pal)reversed a while back. I would expect that Apple has fixed this problem by now, but just in case...
    a) odd field - 720 x 486 - 601 - crop/pad - 4:3 Non-square
    b) odd field - 720 x 480 - 601 - crop/pad - 4:3 Non-square
    c) even field - 720 x 486 - 601 - crop/pad - 4:3 Non-square
    d) even field - 720 x 480 - - 601 - crop/pad - 4:3 Non-square
    Suggestions to buy a different dvd burning program or new software are nice and all, but I simply cannot afford it. I also have a fear that if I were to try a different program that the same darn thing would happen, as no one seems to be able to say with 100% certainty that this specific problem would be fixed. The only thing that would be worse than my sense of hopelessness and helplessness at present would be spending more money and still not having this maddening issue be resolved.
    Help... and thanks to any of you who take the time to read this epic length post and reply!

    PROBLEM SOLVED! Thanks to having downloaded Toast 8, the dreaded interlacing has disappeared. The first test made me nervous. I exported from Avid using Sorenson and using the "automatic" settings for Toast's detection of fields etc. The DVD still had the jigsaw at the same spots, but it was not as pronounced as some of the tests with iDVD. I then exported "same as source" and used the advanced settings in Toast to tell it "lower field" and maxed the compression settings as much as I could without exceeding disc space. The DVD result is the best looking I've seen so far and all interlacing artifacts are gone! Thanks to Blackdog at the Avid Forum. I now know this interlacing problem was 100% the fault of iDVD 8 and will be using Toast from now on.

  • Won't burn DVDs, rejecting various DVDs, what to do?

    Hi all, I've had my MBP for about a year and a half now, and as of late it's not let me burn DVDs, quite some time ago, and also rejects various DVDs (brand new ones, no scratches on some not copies, genuine DVDs) and I don't know why.
    I do have an extended warranty of 3 years, what do I do?

    Since I just burned half a dozen single and dual layer DVDs this week and I'm up to date with updates, I think we can scratch that idea. Though if the update didn't quite take on your computer...If you updated via the software updater you can always download the combo updater and apply it again.
    Media can be an issue - I have DVDs that my old MacBook burned just fine but my MBP won't. (Different drive manufacturers.) Dirt and dust can also be an issue. I'm not a big fan of optical drive cleaners but if you are out of warranty it is worth a try - for that matter if you are still in warranty it is worth a try. The next step would be a call to Apple.

  • Will iDVD 6 burn a dual layer with 3rd party burners

    G'day from Oz.
    I've posted similar to this under the iDVD 5 forum, as this forum wasn't started, but no answer yet. Hopefully people browsing here have updated to iLife 6.
    Quote from .... http://www.apple.com/ilife/idvd/
    "Go for the burn.
    Once you finish your DVD masterpiece, only one step remains. Burning it. Thanks to stellar compatibility, iDVD 6 makes the big burn a painless process.
    With support for a wide variety of DVD media formats — including DVD-R, DVD-RW, DVD+R, DVD+RW, and DVD+R DL — iDVD 6 teams up with a compatible SuperDrive or third-party DVD burner to offer you more media options than ever. You heard right: iDVD lets you burn using compatible third-party DVD burners.
    iDVD even lets you archive projects as disc images. Saved this way, your projects are extremely portable and take up less space, and are read-only. What’s more, they’re already encoded, so you can quickly burn them to DVD whenever you have a free moment or a burner handy".
    end Quote.
    ** Note the 'DVD+R DL'. **
    Does this mean that burning a dual layer project with dual layer 3rd party burners will be supported?
    I've updated to 10.4.4, but my Sony dual layer burner still shows as 'Burn Support: Yes (Unsupported)', in 'About this Mac'. The 'unsupported' means 'no dual layer burning' as far as I know. Also, I believe dual burning is only supported from within the OS itself? True or not?
    Let's see who's first to try the new iDVD 6 out with a 3rd party burner & dual layer disk. If it works, it means iDVD 6 really does support third party burners.
    Please post results.
    Regards
    Santa
    sp 1.8 GHz G5   Mac OS X (10.4.4)  
    sp 1.8 GHz G5   Mac OS X (10.4)  

    G'day.
    Further to my post a week ago re this subject, from the iDVD 6 help pages.
    Quote
    Newer SuperDrive optical drives in Macintosh computers can burn discs in DVD+R DL (Double Layer) format. Double-layer discs store almost twice as much content as single-layer discs, making them a great choice for large projects.
    To see if your computer's SuperDrive can burn DVD+R DL discs, choose Project > Project Info. If you see 8.0 GB (Double Layer) in the DVD Type pop-up menu, you can use these discs for your project.
    To burn a project to a DVD+R DL disc:
    Choose Project > Project Info and choose 8.0 GB (Double Layer) from the DVD Type pop-up menu.
    Select the encoder setting you want to use. If you have more than 120 minutes of content, select Best Quality.
    Click OK.
    Click the Burn button (shown above).
    Insert the disc when you see the prompt.
    If your project is small enough to fit on a single-layer disc and you insert a double-layer disc, you see a dialog giving you the option to change the media type. You can cancel the burn and start again, or insert a new disc and continue.
    You should always burn double-layer discs directly from iDVD and not from a disc image. Double-layer discs burned from a disc image may cause playback issues in some DVD players, such as freezing during playback.
    End quote
    The last sentence is interesting, as the commonly suggested method of burning Dual layer discs is by first creating a disc image, then burning with Toast or Disk Utility.
    Also, my Sony shows up as supporting 8 Gig in iDVD 6, but still shows as 'unsupported' in System Profiler.
    Regards
    Santa
    sp 1.8 GHz G5   Mac OS X (10.4.4)   3 x 300Gb Seagates, Epson 3490 scanner, Epson 830 printer

  • DVD Dual Layer, +/- which is better?

    I've been trying to burn a dual layer DVD-R DL from iDVD6 but it won't let me, it will however let me burn a DVD+R DL even though my burner can burn both. What are the benefits however of burning one from the other as iDVD seems to mainly support DVD+R DL whereas it is always recommended to use DVD-R when burning single layer?

    Thanks guys.
    The problem is I purchased a Dual layer external burner by LaCie and after some digging it appears that although it is capable of burning both +/-R DL, my system profiler only states +R DL, however I can burn -R DL through both system utilities and Toast so this leads me to think that there is a lack of support for -R DL on iDVD6 (whether this is due to the incorrect system profiler provided by LaCie?)
    I've had a few tests and iDVD6 just spits the DVD-R DL back not recognising it as a dual layer disc. I've been on to LaCie and Apple about this but they're both passing off blame to each other.
    Am I right in assuming that DVD+R DL can play ok in most DVD players? I obviously want to create a stable disc and burning DVD-R DL through system utilities has given me many problems on various players.

  • 'Access denied' when attempting to build/burn DVD, please help, urgent/desperate!

    Recently bought CS3, overjoyed with most of it. Encore is giving me serious trouble though at the moment! The problem is that it simply will not burn to a dual layer disc! When we try to burn it to disc it begins the process, wizzing through different elements, then when it gets to 'sorting files'it stops with the message 'Access Denied' If we split the Wedding video in half it will burn to a standard DVD, but it will not burn to dual layer.We installed an additional, external writer in case the problem was with the hardware, but again it would not burn to dual layer. We attempted to build the dvd as an 'image' to the harddrive to then burn to dual layer through nero. This worked for a much smaller file, but when we tried to burn the larger file to the harddrive as an Image, 'Access Denied'!! We've tried everything we can think of, ...but if anyone else can think of a way to fix this, please let us know as we are in the final stages of the video project for a client and simply cannot get the project onto disc! When we 'check project', there are no errors listed. We've tried transcoding it to 7gb 1pass, and importing it from Premire pro without transcoding it, thereby letting Encore set the settings, but no joy. Thanks, Justin.

    Rather than disabling UAC (or turning it down in Win7), just run Encore as Administrator.  Right-click, and select Run As Administrator.  Works fine for me in Windows 7 Professional 64 bit.  Doing it this way you still get the benefits of UAC.

  • Burned DVD skips frames (?) on DVD players

    I recently used my EyeTV 200 to encode some video, which I then exported to iMovie, and then sent it to iDVD from iMovie. I then burned the video to a DVD using iDVD. The burned DVD plays fine on my computer, but does not play correctly on two stand-alone DVD players (one purchased several years ago and one purchased within the last year). During any significantly speedy motion in the image, the moving parts have a jerkiness to them, sort of like it is dropping frames, but there is also a sort of ghosting effect, where the person moving on-screen is seen in the current frame and last frame's position. It's very distracting, and I can't figure out how to fix it, because the file plays fine at every earlier stage in the process.
    The encoding settings in EyeTV are as follows:
    MPEG-2
    NTSC 720x480 D1
    Constant bit rate of 15.0 Mbps
    GOP structure: IBP frames
    Audio: 384 kbps at 48.0 kHz
    The EyeTV file (8.4 GB) plays fine. Then I exported it to iMovie (which seems to be a straight conversion to DV), and it plays fine in iMovie. Then I clicked the "Create iDVD Project" button. I set up my menus, etc, in iDVD, and it plays fine there as well. iDVD is set to encode using Best Quality (the video is 1 hr. 15 min. long). I burned the project to a Maxell DVD-R 8x single-layer disc using a Pioneer DVD-RW DVR-111D*. As I mentioned before, the resulting DVD plays fine using Apple's DVD Player software, but exhibits this weird skipping on both an old and a new stand-alone DVD player.
    I have looked everywhere for some sort of preference setting to boost the quality of the rendering in iDVD (thinking that might be the problem), but the fact that the final product plays fine on the computer seems to suggest that that isn't the problem, but I don't know what else it could be. I have plenty of free space on my hard drive, and a dual-processor 1.25 GHz G4 should be plenty of horsepower to encode this thing.
    Any insight into this situation would be greatly appreciated. Thanks!
    *: The Pioneer DVD burner is an after-market internal drive that I bought from MCE:
    http://www.mcetech.com/dvdr16xdt-d.html
    which is supposed to be 100% supported by Apple software (I think it's supposed to be the same model Apple uses for their superdrives). However, System Profiler lists it as unsupported:
    PIONEER DVD-RW DVR-111D:
    Firmware Revision: 1.06
    Interconnect: ATAPI
    Burn Support: Yes (Unsupported)
    Profile Path: None
    Cache: 2000 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW, +R DL
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media: No
    But iDVD and the Finder both recognize it without any complaint (I've also used it to burn several DVD-R discs in the Finder - with no problems).
    DP 1.25 GHz G4   Mac OS X (10.4.6)   iLife '05
    added DVD burner information
    Message was edited by: elgrego

    EyeTV is what produced the original file. I knew that re-compression could produce problems as I moved from EyeTV to iMovie to iDVD to burned DVD, so to avoid that as much as possible, I put the settings as high as possible - that's why the EyeTV file is an 8.4 GB file for 75 minutes of video, which is a pretty large file for that amount of video.
    But like I said, there is no problem with the quality of the EyeTV file, or the iMovie file, or the iDVD file. They all play beautifully. The burned DVD plays beautifully when it is played on the computer. The only problem is when I try to play the burned DVD on a stand-alone DVD player with a TV.

Maybe you are looking for