Business Hours on Account | limit the available options

Hello Guru's,
On the assignment block "Business hours" on the Account you have three flavours;
1. Calling Hours
2. Business Hours
3. Goods Receiving Hours
In the SAP GUI you have the option to hide one of these options for maintenance. So a user can not maintain Calling Hours for an Account. Does anyone of you know if you have the same kind of setting to have this limitation in the WebUI?
Thanks for the help!
Regards,
Joost

Yes, by design. Because server scenarios are not planned for, designed, or accounted in ConfigMgr. Also, business hours were meant to be user control mechanisms and so no central control was added for them or anything about them -- thus the scripts that
are out there which are your only real option to address your scenario (besides smacking people that don't know what they're doing :-) ).
Sounds like something to submit on connect.microsoft.com though.
Jason | http://blog.configmgrftw.com | @jasonsandys

Similar Messages

Business Rule error: Accounts are not available in the rule table

Hi everybody,
I have a problem running the Business Rule for the profit/loss copy to the equity account.
The Business Rule I set reads from all P&L accounts, P&L specific flow, acual category, all datasources and then it writes everything keeping the source settings apart from the account destination (the equity profit/loss account) and the flow destination (I write in two different flows, so the rule is made up of two equal lines differing only in the flow destination). "PROFIT" is the ID I chose.
Then I created the related script logic (ID=CALCACCOUNT):
*RUN_PROGRAM CALC_ACCOUNT
CATEGORY_M = %CATEGORY_M_SET%
CURRENCYLABEL = %CURRENCYLABEL_SET%
TID_RA = %TIME_SET%
CALC=PROFIT
*ENDRUN_PROGRAM
Finally, the prompt ( process chain: CPMB/RUNCALCACCOUNT):
PROMPT(SELECTINPUT,,,,"CATEGORY_M,CURRENCYLABEL,TIME")
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SUSER,%USER%)
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SAPPSET,%APPSET%)
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SAPP,%APP%)
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SELECTION,%SELECTION%)
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,LOGICFILENAME,CALCACCOUNT.LGF)
But anytime I run the package it fails giving me the message error: "Accounts are not available in the rule table".
I tried every possible change but nothing; if someone could help me somehow I'd be really grateful!!
Thanks
Filippo

Hi James,
Thanks for your quick response. There is no currency dimension in the application... I've tested with the correct businessrule as CALC value, but this didn't do the trick.
Any other suggestions?
Regards,
Vincent

Business Object Security Issue - With the Modify Option

Hi all;
My issue is Im trying to restrict all access on Info View that are related to the Modify option for a Read Only user. When I test the user I right click and the Modify option still there.
Please help thanks.....

Basically the solution was on the Application tab... I verify the privs related to the group and I change a few things. Plus still have the Modify option when I right click. Something helpful was that I can still change the column width or the color of the text or bold the text etc, but I can not change the data, which is good. Also when you right click and select view on the report your are not able to change the width of the columns. But it work ok...
Thanks for your help and support.

Can I distinguish between different googlemail accounts in the mailto option?

I have 2 different gmail accounts. When I use the "Email link" command it does not distinguish between the 2 accounts. Can I set the option to use just one gmail account?

See Settings > Managing multiple accounts:
*http://support.google.com/mail/?hl=en - Gmail Help
Managing multiple accounts - Gmail Help:
* http://support.google.com/mail/bin/topic.py?hl=en&topic=1669030

System should allow to post to bank account with the available cash for cash account in fbl3n

Hi Friends,
User is posting Bank account Dr to
Cash account Cr
If cash account balance is 40000 in FBL3N, and if user posting more than that amount, then system should not allow to post
in F-02 and FB50 transactions.
Pl help me out
Thanks,

Hi Mahesh,
I think we cannot go for cash Journal, because for the below entry i should make the cash account
settings as post automatically only in FS00 transaction.
Bank account Dr to
Cash account Cr
If that is the case then we cannot post manually to the cash account.
I think we need to go for some exit in validation.
correct me if iam wrong.
Thanks

How can I limit the entry options to specific alphabet characters or the numbers 1 to 100 in a text field?

I've written a script on the change event in Adobe Livecycle Designer ES4 on the change* event which is supposed to do the following:
Allow the user to enter any of the following values, but only ONE option is to be entered:
Any numeric value from 1 to 100 (the field is limited to 3 characters)
OR
the entry of the value "na"
OR
the entry of the value "r"
OR
the entry of the value "i"
Here is the script:
// Test input in real time. Only allow approved grades, i, i, na
if (xfa.event.change!="" && !xfa.event.newText.match(/^[0-9]+?$|^(na?)?$|^(r)?$|^(i)?$/)) {
     xfa.event.change ="";
     xfa.host.messageBox("Oops, incorrect entry, Please correct your input. Thank you.");
On the exit event I've set the script to automatically uppercase the characters. This works
Two problems:
1. I can't restrict the numbers to be between 1 and 100.
2. I can't restrict the entry of "na". The field still accepts "n" which I don't want.
Is there a way to correct these two issues? Thanks!

Thanks, I also posted it there. Actually, it took spending time on the JavaScript sites to eventually figure out the answer. Here is what works for me:
On the change event:
//Test input in real time. Only allow approved grades between 1 and 100, r, i, n
if (xfa.this.change!="" && !xfa.event.newText.match(/^[1-9][0-9]?$|^100|^(n|r|i)$/)){
     xfa.event.change ="";
     xfa.host.messageBox("Incorrect entry... Thanks!");

HT1918 I dont know my security questions and am unsure what the email address is on my account as the reset option

I dont know my security questions and am unsure what the email address

If you can't figure out the email address, you need to contact Apple to get the questions reset. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(95663)

Why doesn't the customer support menu-driven system offer an "opt-out" option for cases where none of the available options meets the customer's need?

I have called customer support several times to get problems with my service plan corrected. None of the menu-driven options meets my needs, but the system does not offer a way to connect to a live rep. The only way to get to a live rep is to hit the "invalid selection" O key several times. Good customer service would include an "opt-out" choice.

I'm sorry to learn that our phone system does not include an option for your specific concerns Windy1040! I can address all Verizon Wireless issues! How can I help you?
AntonioC_VZW
Follow us on Twitter at www.twitter.com/VZWSupport

I create a new Sync account but the sync options button doesn't work, there's a "Finish" button instead of Next, and when I click it, nothing happens. v13.0

Screenshot of the setup screen
[http://i23.photobucket.com/albums/b390/dbenjamin1990/firefoxsync.png]

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

SCCM Application & Package deployment-Using the Required option to speed up the deployment process

Current Environment-Window server 2012, SCCM 2012
Question:
Is there a way to speed up the process for the application or package to get downloaded to the SCCM Cache folder on the computer using the Required option. The reason is that when ever i use the required option and use the time as UTC or client local time
with As soon as Possible, the time for the package to download and install by itself would take atleast an hour.When i use the Available option and go to configuration manager and click on the machine & user retrieval policy, the application or package
appears on the system center within seconds, but it dosent happen the same when i use the Required option. The polling schedule is currently set to 5 minutes.Is there any settings or time interval which needs to be changed or i am missing out to speed up the
current Required option process.

Content is not ever downloaded by the client for available deployments until you actually initiate the deployment so not sure what you are expecting.
I think you are confusing some of the basic concepts here also. When Torsten and I say download, it means the download of the content associated with the package/application once the deployment starts. However, a client learns of new deployments (and things
about those deployments like if they are required or not) by retrieving the policy -- this is not the "download". Policy retrieval happens on the cycle specified in the client settings and is by default every 60 minutes although this can be force in a few
different ways including initiating a machine policy retrieval and eval cycle o the client. As Torsten also said, there's no difference between the policy retrieval for required or available deployments -- there's no way for these to be.
Also, why would you use UTC?
Jason | http://blog.configmgrftw.com

HT1351 I just logged into my applie ID and my old Ipod which I may have hooked up to my wifes account to fill with songs...now when I tie it into my computer with my apple ID I can't sync. I go to file menu/library and the sync option is grayed out

Can't seem to sync an version 4 ipod with an old itunes account of mine. I may have hooked it to my wife's account. The only option I have when going to file/library is "transfer purchased from Adam's Ipod"

I'm not sure if the crash is or isn't related to fonts.
Deciphering the crash long is something I don't have any experience with.
I'm not even sure how the crash log is structured. I've downloaded two screen captures: one from the top of the adobe Photoshop crash log and one from the bottom. Perhaps someone more knowledgeable than I can discern what may be causing the crash?
Screen capture from the top of the Adobe Photoshop crash log:
Screen capture from the bottom of the Adobe Photoshop crash log:
Any ideas?
Thanks a bunch.

Installing a LOB App for Multiple Accounts On The Same Surface Device

Hi,
When installing apps to iOS & Android there is no concept of a local user account, and an app can only be installed once. For Windows devices, a single device can have multiple accounts. Those accounts can be local or domain and have administrator privileges
or not.
We are planning to use the Device Enrollment Manager concept in Intune to enroll approximately 200 non-domain joined devices. Each device will have two local accounts - one in English and one in French. We have a LOB Windows App that works in both
languages. We do not want the local accounts with the App to have administrative permission.
It seems you need local administrator permission to enroll the device. If I then install the app from this account, it works. However, I need the app installed on the local English and local French account.
When I log locally into the device using a standard account and log into the Company Portal, it shows the app as installed. It is not, however, installed for that user and is not accessible. Note that I'm using the same Intune account. It is only available
to the local administrator account. The only option I have is 'Re-Install'. When I select that, nothing happens - it is stuck in the "Installing..." state.
If I only enroll the device using the local administrator account and then log into the local standard account to install the app, it doesn't show as installed. When I choose to install it, it gets stuck on Installing.
I'm missing something here...
Is it possible to install an App from Intune more than once on a Surface device? Do the Intune accounts need to be unique per-install? Is it possible to install the app without local administrator permission?
Thank you!
-jd

An update. If I:
Enroll a Windows Surface using a local admin account
Request to install an app from a local standard account it appears stuck on Installing...
Log back in as the local admin account and wait, the app appears.
Questions:
Can the same app be installed into multiple local accounts on the same device? It doesn't look like it.
Is the local account used when the device is enrolled the only local account that will install Intune apps?
-jd

What are normal business hours for support?

What are normal business hours for Apple Support in the Hong Kong region?
The support page at:
http://www.apple.com/hk/en/support/iphone/contact/
and the phone number, when called, do not specify normal business hours. In fact, the phone number, when called, only says "call back during normal business hours".
Please... are they open on Sunday, Saturday, 8pm, 7pm, ????????

Really kb1951, I did try calling on Saturday, about 6pm. They were closed. But that does not answer my question. And "normal" support lines do address their hours in the recording.
Additionally, if you call at 4pm, even, how does that tell you when they open??? Should I call at 7am, 8am, 9am, 10am, just to get my answer?
You trying to answer my question based on what other businesses do is really a waste of your and my time. As you're just "guessing". I can guess. I don't need you for that!
I came to the support community for a reason - to get an answer, not a guess.

The available qty field

In Ecommerce the available field under item financials available where does it get the qty from is it from the web last count field in the item management on SAP Business One or is it the available field
Please advise
Thank you

thank you

Changing the Availability Check key in an existent Sales Order line

Hello gurus.
Is it possible to modify the Availability Check key (VBAP-MTVFP) of a material in an existent Sales Order line?
I changed it in the material master, but since documents are not automatically updated, I wanted to modify this value in an existing sales order line. I am not even able to find the field in it.
I had to delete the order line and create it again, but then I have troubles getting the exact same confirmed date that I had before.
Any help? Thank you.

You cant see at item level. To see in sale order, click from top menu bar, Environment -- Availability. Now you can see the availability check on top of the screen.
Meanwhile, I dont think, this field will be in editable mode once partial delivery is made in which case, LSMW also wont help you.
If your requirement is desperate to change the availability check, to me the available option is close the existing sale orders, create fresh orders after changing the availability check in material master. On the other hand, if you want to change only in sale order, then the option is LSMW as you cant even succeeed in TCode MASS
thanks
G. Lakshmipathi

Business Hours on Account | limit the available options

Similar Messages

Maybe you are looking for