'BusinessObjects.Licensing.KeycodeDecoder' failed to load....
How difficult can it be to get a new installation of VS2010 & CR FOR VS2010 configured where it works?????
I have done the following:
1) Installed VS 2010 Professional on a CLEAN & NEW copy of Windows 7 Ultimate.
2) Installed CR for VS2010, 32 & 64-bit runtimes. Tried and tried. No dice.
3) UNINSTALLED EVERY REFERENCE TO CRYSTAL REPORTS FOUND!!
4) Rebooted the computer.
5) Found CR for VS2010 SUPPORT PACK 2. Downloaded it, both runtimes.
6) Installed CR for VS2010.
7) Installed CR 32-bit runtime.
8) Installed CR 64-bit runtime.
9) Opened my project. Attempted to run.
This is the same bogus message I've gotten from the start. When I look for BusinessObjects.Licensing.KeycodeDecoder.dll (I'm assuming that's the file I should be looking for?) it is nowhere to be found on my computer.
The assembly with display name 'BusinessObjects.Licensing.KeycodeDecoder' failed to load in the 'Load' binding context of the AppDomain with ID 1. The cause of the failure was: System.IO.FileNotFoundException: Could not load file or assembly 'BusinessObjects.Licensing.KeycodeDecoder, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
Am I correct in thinking that I do not have to have a FULL version of Crystal Reports? I only use Crystal Reports INSIDE Visual Studio 2005. I know it's not 'embedded' exactly the same way it was, but COME ON!! Literally wasted all day on this...to no avail.
Any words of wisdom?
Here are few links to the articles and threads where simillar issues are discussed,
See if they help you in case if we are missing the obvious.
[CR4VS2010 - BusinessObjects.Licensing.KeycodeDecoder.dll, cannot be loaded|CR4VS2010 - BusinessObjects.Licensing.KeycodeDecoder.dll, cannot be loaded]
[1535792 - Error: "The keycode assembly, BusinessObjects.Licensing.KeycodeDecoder.dll, cannot be loaded"|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533333335333733393332%7D.do]
[1547065 - CRVS2010 is missing BusinessObjects.Enterprise.* assemblies |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533343337333033363335%7D.do]
[Warning: CA0060 BusinessObjects.Licensing.KeycodeDecoder|Warning: CA0060 BusinessObjects.Licensing.KeycodeDecoder]
[CRVS2010 - Exception BusinessObjects.Licensing.KeycodeDecoder not found|CRVS2010 - Exception BusinessObjects.Licensing.KeycodeDecoder not found]
At below search, you will find many other such links, take a look.
[http://www.sdn.sap.com/irj/scn/advancedsearch?query=%2527businessobjects.licensing.keycodedecoder%2527failedtoload|http://www.sdn.sap.com/irj/scn/advancedsearch?query=%2527businessobjects.licensing.keycodedecoder%2527failedtoload]
- Bhushan.
Similar Messages
-
CR4VS2010 - BusinessObjects.Licensing.KeycodeDecoder.dll, cannot be loaded
Hi there,
I am trying to use the Production Release of CR4VS2010 as found here:
Crystal Reports for Visual Studio 2010 Production Release Now Available
Whenever I try to run a report I get the following exception:
Load report failed.
Unsupported Operation. A document processed by the JRC engine cannot be opened in the C++ stack.
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
If I try to use the Database Expert or Set the Database Location for a report VS2010 simply hangs.
If I look in the event log, I see a Crystal Reports error:
The description for Event ID ( 4353 ) in Source ( Crystal Reports ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: The keycode assembly, BusinessObjects.Licensing.KeycodeDecoder.dll, cannot be loaded.
If I perform Code Analysis on my solution, I get this warning:
Warning 4 CA0060 : The indirectly-referenced assembly 'BusinessObjects.Licensing.KeycodeDecoder, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' could not be found. This assembly is not required for analysis, however, analysis results could be incomplete. This assembly was referenced by: C:Program FilesSAP BusinessObjectsCrystal Reports for .NET Framework 4.0CommonSAP BusinessObjects Enterprise XI 4.0win32_x86dotnetCrystalDecisions.CrystalReports.Engine.dll.
My environment is:
Windows XP SP3
VS2010 Ultimate
I have other versions of CR installed
I am targetting Framework 3.5 SP1 (Full)
I have seen similar errors published with the Beta version and no real solution to them.
I have to have side by side versions of VS and CR together.
I am developing internal apps which will be deployed on servers where there will be side by side versions of VS
Can anyone help please???
Thanks,
JamesHi Ludek,
We're getting there... taking your suggestion about using the samples... they worked fine.
So I started digging deeper... I'm using code such as...
using (var report = new ReportDocument())
report.Load(filename);
I need to do this because even though I have a "correctly designed" report when developing, the business might need to alter the layout at a later date. So I need to pick up whatever is on disk at the time.
So I look in a subfolder of the deployed project for the .rpt file.
And here's where things were going wrong at runtime...
There was a SILLY bug in my code such that I wasn't picking up the correct folder... i.e. File.Exists(filename) == false
So here is some sample code that demonstrates the problem:
namespace MisleadingExceptionConsoleApp
class Program
static void Main(string[] args)
using (var report = new CrystalDecisions.CrystalReports.Engine.ReportDocument())
report.Load(@"c:\temp\a_report_that_does_not_exist.rpt");
When you run this, you get:
- ex {"Load report failed."} System.Exception {CrystalDecisions.Shared.CrystalReportsException}
+ [CrystalDecisions.Shared.CrystalReportsException] {"Load report failed."} CrystalDecisions.Shared.CrystalReportsException
+ Data {System.Collections.ListDictionaryInternal} System.Collections.IDictionary {System.Collections.ListDictionaryInternal}
HelpLink null string
- InnerException {"Unsupported Operation. A document processed by the JRC engine cannot be opened in the C++ stack."} System.Exception {System.Runtime.InteropServices.COMException}
+ [System.Runtime.InteropServices.COMException] {"Unsupported Operation. A document processed by the JRC engine cannot be opened in the C++ stack."} System.Runtime.InteropServices.COMException
+ Data {System.Collections.ListDictionaryInternal} System.Collections.IDictionary {System.Collections.ListDictionaryInternal}
HelpLink null string
+ InnerException null System.Exception
Message "Unsupported Operation. A document processed by the JRC engine cannot be opened in the C++ stack." string
Source "clientdoc.dll" string
StackTrace " at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)\r\n at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)\r\n at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()" string
+ TargetSite {Void Open(System.Object ByRef, Int32)} System.Reflection.MethodBase {System.Reflection.RuntimeMethodInfo}
+ Static members
+ Non-Public members
Message "Load report failed." string
Source "CrystalDecisions.CrystalReports.Engine" string
StackTrace " at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()\r\n at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)\r\n at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)\r\n at MisleadingExceptionConsoleApp.Program.Main(String[] args) in g:
Projects
MisleadingExceptionConsoleApp
MisleadingExceptionConsoleApp
Program.cs:line 18" string
+ TargetSite {Void EnsureDocumentIsOpened()} System.Reflection.MethodBase {System.Reflection.RuntimeMethodInfo}
+ Static members
+ Non-Public members
So to my mind, the InnerException here ("Unsupported Operation. A document processed by the JRC engine cannot be opened in the C++ stack.") is wrong and incredibly misleading!!! :O)
So that answers my runtime issue.
I still cannot open the Database Expert at design time... however, that is not a pressing issue for me right now.
But if you do have any ideas on how to determine the root cause I'd like to get that sorted too.
Many thanks,
James -
BusinessObjects.Licensing.KeycodeDecoder.dll could not be loaded
Hi we have developed an web appliaction using CR fro VS 2010 and framework 4.0 and upgrade the application to the release version of CR for VS 2010 (13.0)
In the developmet enviroment everithing works well, but when we install the web application to the client web server whe we try to access to our report developed using CR we have always a blank page with this js error "bobj is undefined", and when we watch to the event viewer we find also an entry with this message "the assembly BusinessObjects.Licensing.KeycodeDecoder.dll could not be loaded"
The web server enviroment is this one
-Win2003 server 32 bit with IIS6
-Framework 4 installed
-CR 13.0 installed
-no other CR version installed in the server
-Web application running with an application pool with an administrator user
Could someone help us?By the way, after some research it looks like this error originates from the ReportDocument class's constructor. It appears that during this process is where loading of resources takes place and also some license checking stuff. In this process somewhere a FileNotFoundException results in this error showing up in the Windows Application event log.
I'm taking a look at the situations that may be causing this to happen but I can't find anything yet. My assumption is that this type of exception can be raised in cases where a file is not accessible due to permissions issues or hadn't been installed properly due to similar issues with permissions. Also I believe sometimes registry related errors can show up as FileNotFoundExceptions as well so I'm looking out for that too.
UPDATE:
It looks like the private ReportDocument.getMaxUsage() method that is called indirectly the first time a ReportDocument instance is created and this method appears to reference objects declared within the BusinessObjects.Licensing.KeycodeDecoder assembly such as the following types.
com.crystaldecisions.common.keycode.KeycodeException
com.crystaldecisions.common.keycode.KeycodeCollection
com.crystaldecisions.common.keycode.KeycodeDecoderFactory
These references are causing a FileNotFoundException when the assemblies are being resolved during the JIT processes and hence causing the errors that everybody has been seeing in their Windows Application error log. Since the exception is being caught and logged, this may not be negatively affecting the behavior of the new Crystal Reports for Visual Studio 2010 release but it does cause these error logs to pile up though and exceptions are also somewhat costly performance wise to raise so that could slow down the initialization of some apps just slightly.
Edited by: jpierson on Nov 23, 2010 10:38 PM -
"CRVS2010 Beta - BusinessObjects.Licensing.KeycodeDecoder.dll, cannot be lo
Creating an instance of "Report Document" writes an error in Event viewer.
I debugged and found following line of code:
CrystalDecisions.CrystalReports.Engine.ReportDocument reportDocument = new CrystalDecisions.CrystalReports.Engine.ReportDocument() generates error in Event Viewer as:
"The description for Event ID ( 4353 ) in Source ( Crystal Reports ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: The keycode assembly, BusinessObjects.Licensing.KeycodeDecoder.dll, cannot be loaded."
I checked for SAP forums for this error message and the most of the times answer was that earlier versions of Crystal Reports if installed can cause this error. VM on which this issue is occuring does not has any other versions. We had uninstalled previous versions and installed CR VS2010 Beta2.
However, I don't know the impact of this error. Any ideas?
Thanks,
Gulab.See my comments on the thread linked below. I've been getting mixed messages as far as whether the KeycodeDecoder assembly is actually used or not in CR4VS2010 but from my own analysis, the ReportDocument class does make references to types defined in that assembly. Whether these error log entries indicate something harmful or not I'm not sure but it does seem to represent the failure of proper licensing.
Re: BusinessObjects.Licensing.KeycodeDecoder.dll could not be loaded -
Keycode assembly (Licensing.KeycodeDecoder.dll) cannot be loaded
I apologize if this has been posted about before here but in searching I can't find a reference to his with my exact same circumstances. I've seen posts regarding this for ASP sites and JAVA applications but not one specifically pertaining to a WinForms application.
I'm deploying a VS2010 WinForms application using CRVS2010 to a clean virtual 32-bit WinXP SP3 machine. I've installed the 32 bit CR runtime (CRRuntime_32bit_13_0.msi) along with my application, but previewing the report still generates an unhandled exception with the following entry from Crystal Reports in the Windows Application Event Log:
The description for Event ID ( 4353 ) in Source ( Crystal Reports ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: The keycode assembly, BusinessObjects.Licensing.KeycodeDecoder.dll, cannot be loaded.
These same reports all run fine under the VS2010 IDE on my development machine. Is this a known error in the CR runtime and WinForms or have I missed something in the deployment process?Don,
Ok, after you said you couldn't replicate it I started making a new 2010 project (rather than one upgraded from VS2005 whcih this one is) to just display a simple dataset on a CR Preview screen.
It was at that point that I found I have two different CR Viewers in my toolbox, one of which is grayed out (even with the target framework set to 4.0 and not 4.0 Client). I have to click the "show all" option in the tool box to see the "Crystal Reports" tab, and the 14.x version one shows up under the default VS "Reporting" tab. I did check my add/remove programs and only the 13.x version is listed so I'm sure the beta is not installed.
[Click Here to see a screen cap of the toolbox|http://www.phx-is.com/images-web/CRViewers.png]
The one that is NOT grayed out is version 14.0.2000.0 and the one that IS grayed out is 13.0.2000.0. In checking my project, I have determined that the report viewer container in my program is pointing to:
C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet\CrystalDecisions.Windows.Forms.dll
Which shows a version of 13.0.2000.0 in my References for the project. However, the 13.0.2000.0 control on my toolbox remains grayed out, which confuses me even more.
Where to go from here?
On a probably unrelated note: Writing this test program, I also discovered that VS would lock up when I selected "Database Expert" option under "Database Fields' in the report designer ([See this thread|CRVS2010 Beta - Database expert crashes Visual Studio;) but following the advice in that thread and renaming my "C:\Temp" folder solved that problem.
Edited by: Richard Wolf PIS on Jan 5, 2011 12:55 AM -
Failed to load workbook from BusinessObjects Enterprise
Hi all,
I created a Live Office document on top of WebI report and exported it to CMS and in Xcelsius when I try to import this LO document it gives a message "Failed to load workbook from BusinessObjects Enterprise".
My BO version is XI 3.1, Live Office : 3.1, Xcelsius version is SP3.
Any suggestions ?
Regards,
MaheshHi Vinay
I tried your suggestion to load the Live Office data using the path Data > Import from Platform. After selecting the Live Office file from BOE, the Live Office data don't seem to be loading into Xcelsius, in other words the Xcelsius hangs. I'm currently using BOE 3.1 SP3 and my Xcelsius 2008 Enterprise and Live Office are also on SP3.
Is there anything I need to do to make it work eg. is there any FP to apply to fix this issue?
Please advise.
Thanks,
Anthony -
Failed to load database information. Error in File temp_
Our environment:
Windows Server 2012 R2 Data-center Edition 64 bit
Visual Studio Pro 2013 Version 12.0.3.30110.00 Update 1
.Net 4.5.51641
Crystal Reports for VS 2013 V13.0.9.1312
Oracle ODAC 11.2.0
We created a winform application to generate a form letter report that runs fine within the IDE. When we build the the exe and copy it from the project folder to a folder on the C:\drive of this same pc and try to execute it we get these error messages (partial list);
CrystalDecisions.CrystalReports.Engine.DataSourceException: Failed to load database information.
Error in File temp_d55286fc-26ee-4216-9062-3e32380313ab {B640FD39-66AC-4B6E-995D-7218BB48A992}.rpt:
Failed to load database information. ---> System.Runtime.InteropServices.COMException: Failed to load database information.
Error in File temp_d55286fc-26ee-4216-9062-3e32380313ab {B640FD39-66AC-4B6E-995D-7218BB48A992}.rpt:
Failed to load database information.
at CrystalDecisions.ReportAppServer.Controllers.DatabaseControllerClass.ReplaceConnection(Object oldConnection, Object newConnection, Object parameterFields, Object crDBOptionUseDefault)
at CrystalDecisions.CrystalReports.Engine.Table.SetDataSource(Object val, Type type)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSourceInternal(Object val, Type type)
--- End of inner exception stack trace ---
at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSourceInternal(Object val, Type type)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSource(DataSet dataSet)
at cr3Test.Form1.Form1_Load(Object sender, EventArgs e)
Here is the app:
Imports System.Data.OleDb
Imports System.Data
Imports System
Imports System.Windows.Forms
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Public Class Form1
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles Me.Load
Dim crReportDocument As New CrystalReport3()
Dim DataSet1 As DataSet
Dim adoOleDbConnection As OleDbConnection
Dim adoOleDbDataAdapter As OleDbDataAdapter
Dim connectionString As String = ""
connectionString = "Provider=OraOLEDB.Oracle;"
connectionString += "Data Source=ourdb;"
connectionString += "User ID=ouruserid;Password=ourpsw"
adoOleDbConnection = New OleDbConnection(connectionString)
Dim sqlString As String = "select * from TEMP_FRI_LETTERS"
adoOleDbDataAdapter = New OleDbDataAdapter(sqlString, adoOleDbConnection)
DataSet1 = New DataSet()
adoOleDbDataAdapter.Fill(DataSet1, "TEMP_FRI_LETTERS")
'Dim xmlPath As String = "C:\Temp\test.xml" ' use these two statment s to verify dataset works
'DataSet1.WriteXml(xmlPath, XmlWriteMode.WriteSchema)
crReportDocument.SetDataSource(DataSet1)
crReportDocument.PrintOptions.PrinterName = "HP_LaserJet_4350_PCL_5e_Info_Tech"
crReportDocument.Refresh()
crReportDocument.PrintToPrinter(1, False, 0, 0)
DataSet1.Dispose()
adoOleDbDataAdapter.Dispose()
adoOleDbConnection.Close()
adoOleDbConnection.Dispose()
crReportDocument.Dispose()
Me.Close()
End Sub
End Class
Here is the app.config:
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.5" />
</startup>
<system.windows.forms jitDebugging="true" />
</configuration>
We have the CPU set to x86 as we are ultimately trying to generate a 32 bit app for XP and Win 7. We only installed the 32 bit run time on this pc because we have no intention of going to 64 bit apps on the clients. Are there additional dlls or something that has to be installed in the same folder as the exe on this development machine.
BruceLooking at the AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_myprograminfo led us to the last dll loaded being:
LoadedModule[211]=C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crdb_adoplus_res_en.dll
State[0].Key=Transport.DoneStage1
State[0].Value=1
FriendlyEventName=Stopped working
Scanning the community for "crdb_adoplus_res_en.dll" we got a hot on this issue again:
Failed to load database information. Error in File temp_
From the above we found this:
1. the app.exe.config is all in one package which cannot be separated with the EXE file.
2. the supporting component such as dll files, app.exe.config etc CANNOT be combined into the EXE file
Adding the cr3Test.exe.config to the same folder as the cr3Test.exe RESOLVED the problem on Win 7. It also RESOLVED the problem on Server 2012 R2.
We still need to test on Server 2008 R2 but we are hopeful when that time comes.
Thanks.
Bruce -
A required application library failed to load and the product cannot continue
Seems like I go through this problem time and again with Photoshop + Acrobat CS2 and still have yet to resolve a way of fixing it short of completely wiping my drive and re-installing Windows (XP Pro) The error is "application library failed to load and the product cannot continue"
If there is anyone out there that has figured out a way to fix this issue please fill me in.
This time I went as far as a complete and though removal of all Adobe products from the system and the registry and then completely reinstalled the product.
I have forgone purchasing CS3 because of this issue as I am 99% sure that it has still not been resolved.
Basically Photoshop and Acrobat are useless at this point and I am using an old version of Picture Publisher and Macromedia Fireworks to complete my work. This I assume is good advertising for Adobe :)
Anyone have any ideas????
See this post in the forum "could not complete your request because of a program error", PDF format, cs2, xp" as this is an ongoing Adobe issue that they have completely blown off!
I am working on
Adobe Photoshop Version: 9.0.2 (9.0.2x296)
Operating System: Windows XP
Version: 5.1 Service Pack 2
System architecture: Intel CPU Family:15, Model:2, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, HyperThreading
Physical processor count: 1
Processor speed: 2798 MHz
Built-in memory: 2559 MB
Free memory: 1812 MB
Memory available to Photoshop: 1758 MB
Memory used by Photoshop: 55 %
Image cache levels: 6
Serial number: XXXXXXXXXXXXXXXXXX (I have a legal copy)
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS2\
Temporary file path: C:\DOCUME~1\JIMSHE~1\LOCALS~1\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 128.0G, 65.5G free
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS2\Plug-Ins\
Additional Plug-ins folder: not set
Installed plug-ins:
ADM 3.10x21
ASDStrm 1.03x2
Accented Edges 9.0
Angled Strokes 9.0
Average 9.0 (9.0x196)
BMP 9.0 (9.0x196)
Bas Relief 9.0
Camera Raw 3.7
Chalk & Charcoal 9.0
Charcoal 9.0
Chrome 9.0
Cineon 9.0 (9.0x196)
Clouds 9.0 (9.0x196)
Color Halftone 9.0 (9.0x196)
Colored Pencil 9.0
CompuServe GIF 9.0 (9.0x196)
Conditional Mode Change 9.0 (9.0x196)
Contact Sheet II 9.0 (9.0x196)
Conté Crayon 9.0
Craquelure 9.0
Crop and Straighten Photos 9.0 (9.0x196)
Crop and Straighten Photos Filter 9.0 (9.0x196)
Crosshatch 9.0
Crystallize 9.0 (9.0x196)
Cutout 9.0
Dark Strokes 9.0
De-Interlace 9.0 (9.0x196)
Difference Clouds 9.0 (9.0x196)
Diffuse Glow 9.0
Displace 9.0 (9.0x196)
Dry Brush 9.0
Embed Watermark 1.70.19
Export Transparent Image 9.0 (9.0x196)
Extract 9.0 (9.0x196)
Extrude 9.0 (9.0x196)
FastCore Routines 9.0 (9.0x196)
Fibers 9.0 (9.0x196)
Film Grain 9.0
Filmstrip 9.0 (9.0x196)
Filter Gallery 9.0
Fit Image 9.0 (9.0x196)
Fresco 9.0
Generic EPS 9.0
Glass 9.0
Glowing Edges 9.0
Grain 9.0
Graphic Pen 9.0
HDRMergeAlign 9.0x001
HDRMergeUI 9.0x001
Halftone Pattern 9.0
Ink Outlines 9.0
Lens Blur 9.0
Lens Correction 9.0
Lens Flare 9.0 (9.0x196)
Lighting Effects 9.0 (9.0x196)
Liquify 9.0
MMXCore Routines 9.0.1 (9.0.1x289)
Merge to HDR 1.0x001
Mezzotint 9.0 (9.0x196)
Mosaic Tiles 9.0
Multiprocessor Support 9.0 (9.0x196)
NTSC Colors 9.0 (9.0x196)
Neon Glow 9.0
Note Paper 9.0
Ocean Ripple 9.0
OpenEXR 9.0 (9.0x196)
PCX 9.0 (9.0x196)
PNG 9.0 (9.0x196)
PNG Icons 1.22x1
Paint Daubs 9.0
Palette Knife 9.0
Patchwork 9.0
Paths to Illustrator 9.0 (9.0x196)
Pattern Maker 9.0 (9.0x196)
Photo CD 9.0 (9.0x196)
Photocopy 9.0
Photomerge 9.0 (9.0x196)
PhotomergeCylmap 9.0 (9.0x196)
PhotomergeRender 9.0 (9.0x196)
PhotomergeUI 9.0 (9.0x196)
Picture Package 9.0 (9.0x196)
PictureJohn,
foud your message very helpfull. I experience the same problem when strating a CS2 program (Photoshop, Indesign,...) over a terminal server connection.
It's weird because starting more than one instance is possible (despite what's written in the article ) as long as the users have administrative rights. I've encountererd this problem because my daughter of 11 wants to use Photoshop now. I have a terminal server set up so the kids may experiment with their own desktops whithout the risk to screw it up and because I can access all my programs from wherever I want.
But as I found out now I must buy volume licensing instead of retail (even if it's for just one instance...)
Want to know if possible how "difficult" it was to change your retail to a volume licensed version? Did you have to pay the full amount again? Hope an upgrade exist from Creative Suite CS2 - retail to Creative suite CS3 - volume licensed for the same price as from retail to retail... Or am I hoping to much?
Kind regards and thanks for your info,
Patrick -
Failed to load Execute Package Task error.
Hello Experts,
Excuse my newbie question.
Execute Package Task: Error: The task has failed to load. The contact information for the task is "Microsoft Corporation; Microsoft SQL Server; Microsoft corporation; All Rights Reserved http://www.microsoft.com/sql/support/default.asp:1"
We have a windows service running on our app server that deploys a package that executes other packages using execute package task. This package and rest of the packages are in the same folder at the same level under integration services
catalog. The package fails to execute with the above said error.
Execute package task is configured to run in 'in-process' mode. Changing delay validation to true/false in child packages didn't help.
ironically if the package is deployed using a console application from the app server the package gets executed just fine. I checked permissions, everything seem fine.
Is there anyway to get details of this error to understand the problem better? I am looking at reports > standard reports > all executions.
Thanks.As it turns out, the 63bit ExecPackageTask.dll was not found under "C:\Program Files\Microsoft SQL Server\110\DTS\Binn". Installing "SQL Server Data Tools" installed only 32 bit version of the component under "C:\Program Files (x86)\Microsoft SQL
Server\110\DTS\Binn".
Is there a way to get 64bit version of this component without installing "Integration Services" (to avoid possible license issues)?
Hi Jayakarthiks,
To make use of the 64-bit ExecPackageTask.dll, you also need the 64-bit SSIS runtime and 64-bit DTExec utility tool. To obtain the 64-bit SSIS runtime and tools, you have to install the SQL Server Integration Services service from your SQL Server 2012 install
media.
Reference:
http://msdn.microsoft.com/en-us/library/ms143731.aspx
Regards,
Mike Yin
If you have any feedback on our support, please click here
Mike Yin
TechNet Community Support -
"Failed to load the NVIDIA kernel module" [SOLVED]
Hi, I've just done a fresh install of Arch64 and I'm having problems with NVIDIA driver from the repo.
xorg, xf86-input-evdev -- INSTALLED
nvidia, nvidia-utils, lib32-nvidia-utils -- INSTALLED (version 256.44-1)
nouveau -- NOT INSTALLED
here goes the log files:
uname -a
Linux desktop 2.6.32-lts #1 SMP Wed Aug 4 22:02:05 UTC 2010 x86_64 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ AuthenticAMD GNU/Linux
lspci | grep VGA
00:05.0 VGA compatible controller: nVidia Corporation C51PV [GeForce 6150] (rev a2)
/etc/X11/xorg.conf (generated when I ran "nvidia-xconfig"):
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.44 ([email protected]) Thu Jul 29 01:52:55 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
/var/Xorg.0.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 142.066]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 142.084] X Protocol Version 11, Revision 0
[ 142.091] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 142.098] Current Operating System: Linux desktop 2.6.32-lts #1 SMP Wed Aug 4 22:02:05 UTC 2010 x86_64
[ 142.106] Kernel command line: BOOT_IMAGE=/vmlinuz26-lts root=/dev/disk/by-uuid/9eb5ef94-284b-4b7e-b824-5c6b0f329fe8 ro quiet
[ 142.116] Build Date: 21 June 2010 12:01:49PM
[ 142.125]
[ 142.135] Current version of pixman: 0.18.2
[ 142.145] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 142.167] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 142.204] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 6 21:15:02 2010
[ 142.218] (==) Using config file: "/etc/X11/xorg.conf"
[ 142.232] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 142.246] (==) ServerLayout "Layout0"
[ 142.246] (**) |-->Screen "Screen0" (0)
[ 142.246] (**) | |-->Monitor "Monitor0"
[ 142.246] (**) | |-->Device "Device0"
[ 142.246] (**) |-->Input Device "Keyboard0"
[ 142.246] (**) |-->Input Device "Mouse0"
[ 142.246] (==) Automatically adding devices
[ 142.246] (==) Automatically enabling devices
[ 142.246] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 142.246] Entry deleted from font path.
[ 142.246] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 142.246] Entry deleted from font path.
[ 142.246] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 142.246] Entry deleted from font path.
[ 142.246] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 142.246] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 142.246] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 142.246] (WW) Disabling Keyboard0
[ 142.246] (WW) Disabling Mouse0
[ 142.246] (II) Loader magic: 0x7ce880
[ 142.246] (II) Module ABI versions:
[ 142.246] X.Org ANSI C Emulation: 0.4
[ 142.246] X.Org Video Driver: 7.0
[ 142.246] X.Org XInput driver : 9.0
[ 142.246] X.Org Server Extension : 3.0
[ 142.252] (--) PCI:*(0:0:5:0) 10de:0240:1043:81cd nVidia Corporation C51PV [GeForce 6150] rev 162, Mem @ 0xfc000000/16777216, 0xd0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[ 142.252] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 142.252] (II) LoadModule: "extmod"
[ 142.252] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 142.253] (II) Module extmod: vendor="X.Org Foundation"
[ 142.253] compiled for 1.8.1.902, module version = 1.0.0
[ 142.253] Module class: X.Org Server Extension
[ 142.253] ABI class: X.Org Server Extension, version 3.0
[ 142.253] (II) Loading extension MIT-SCREEN-SAVER
[ 142.253] (II) Loading extension XFree86-VidModeExtension
[ 142.253] (II) Loading extension XFree86-DGA
[ 142.253] (II) Loading extension DPMS
[ 142.253] (II) Loading extension XVideo
[ 142.253] (II) Loading extension XVideo-MotionCompensation
[ 142.253] (II) Loading extension X-Resource
[ 142.253] (II) LoadModule: "dbe"
[ 142.253] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 142.253] (II) Module dbe: vendor="X.Org Foundation"
[ 142.253] compiled for 1.8.1.902, module version = 1.0.0
[ 142.253] Module class: X.Org Server Extension
[ 142.253] ABI class: X.Org Server Extension, version 3.0
[ 142.253] (II) Loading extension DOUBLE-BUFFER
[ 142.253] (II) LoadModule: "glx"
[ 142.253] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 142.269] (II) Module glx: vendor="NVIDIA Corporation"
[ 142.269] compiled for 4.0.2, module version = 1.0.0
[ 142.269] Module class: X.Org Server Extension
[ 142.269] (II) NVIDIA GLX Module 256.44 Thu Jul 29 01:47:53 PDT 2010
[ 142.269] (II) Loading extension GLX
[ 142.269] (II) LoadModule: "record"
[ 142.269] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 142.269] (II) Module record: vendor="X.Org Foundation"
[ 142.269] compiled for 1.8.1.902, module version = 1.13.0
[ 142.269] Module class: X.Org Server Extension
[ 142.269] ABI class: X.Org Server Extension, version 3.0
[ 142.269] (II) Loading extension RECORD
[ 142.269] (II) LoadModule: "dri"
[ 142.270] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 142.270] (II) Module dri: vendor="X.Org Foundation"
[ 142.270] compiled for 1.8.1.902, module version = 1.0.0
[ 142.270] ABI class: X.Org Server Extension, version 3.0
[ 142.270] (II) Loading extension XFree86-DRI
[ 142.270] (II) LoadModule: "dri2"
[ 142.270] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 142.270] (II) Module dri2: vendor="X.Org Foundation"
[ 142.270] compiled for 1.8.1.902, module version = 1.2.0
[ 142.270] ABI class: X.Org Server Extension, version 3.0
[ 142.270] (II) Loading extension DRI2
[ 142.270] (II) LoadModule: "nvidia"
[ 142.270] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 142.271] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 142.271] compiled for 4.0.2, module version = 1.0.0
[ 142.271] Module class: X.Org Video Driver
[ 142.288] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
[ 142.303] (EE) NVIDIA: system's kernel log for additional error messages.
[ 142.319] (II) UnloadModule: "nvidia"
[ 142.319] (II) Unloading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 142.319] (EE) Failed to load module "nvidia" (module-specific error, 0)
[ 142.335] (EE) No drivers available.
[ 142.351]
Fatal server error:
[ 142.384] no screens found
[ 142.400]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 142.469] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 142.488]
find / -name "*nvidia*"
/lib/modules/2.6.34-ARCH/kernel/drivers/video/backlight/mbp_nvidia_bl.ko
/lib/modules/2.6.34-ARCH/kernel/drivers/video/nvidia
/lib/modules/2.6.34-ARCH/kernel/drivers/video/nvidia/nvidiafb.ko
/lib/modules/2.6.34-ARCH/kernel/drivers/video/nvidia.ko
/lib/modules/2.6.32-lts/kernel/drivers/video/backlight/mbp_nvidia_bl.ko
/lib/modules/2.6.32-lts/kernel/drivers/video/nvidia
/lib/modules/2.6.32-lts/kernel/drivers/video/nvidia/nvidiafb.ko
/etc/OpenCL/vendors/nvidia.icd
/etc/X11/xorg.conf.d/20-nvidia.conf
/usr/lib/libnvidia-cfg.so.1
/usr/lib/libnvidia-glcore.so.256.44
/usr/lib/vdpau/libvdpau_nvidia.so.256.44
/usr/lib/vdpau/libvdpau_nvidia.so
/usr/lib/vdpau/libvdpau_nvidia.so.1
/usr/lib/tls/libnvidia-tls.so.256.44
/usr/lib/libnvidia-cfg.so.256.44
/usr/lib/libnvidia-cfg.so
/usr/lib/libnvidia-tls.so.256.44
/usr/lib/xorg/modules/drivers/nvidia_drv.so
/usr/lib/libnvidia-compiler.so.256.44
/usr/share/licenses/nvidia
/usr/share/licenses/lib32-nvidia-utils
/usr/share/licenses/nvidia-utils
/usr/share/applications/nvidia-settings.desktop
/usr/share/man/man1/nvidia-smi.1.gz
/usr/share/man/man1/nvidia-settings.1.gz
/usr/share/man/man1/nvidia-xconfig.1.gz
/usr/share/doc/nvidia
/usr/share/doc/nvidia-utils
/usr/share/pixmaps/nvidia-settings.png
/usr/bin/nvidia-bug-report.sh
/usr/bin/nvidia-settings
/usr/bin/nvidia-smi
/usr/bin/nvidia-xconfig
/usr/src/linux-2.6.34-ARCH/include/config/backlight/mbp/nvidia.h
/usr/src/linux-2.6.34-ARCH/include/config/fb/nvidia
/usr/src/linux-2.6.34-ARCH/include/config/fb/nvidia.h
/usr/src/linux-2.6.32-lts/include/config/backlight/mbp/nvidia.h
/usr/src/linux-2.6.32-lts/include/config/fb/nvidia
/usr/src/linux-2.6.32-lts/include/config/fb/nvidia.h
/opt/lib32/usr/lib/libvdpau_nvidia.so.256.44
/opt/lib32/usr/lib/libvdpau_nvidia.so
/opt/lib32/usr/lib/libnvidia-glcore.so.256.44
/opt/lib32/usr/lib/tls/libnvidia-tls.so.256.44
/opt/lib32/usr/lib/libvdpau_nvidia.so.1
/opt/lib32/usr/lib/libnvidia-tls.so.256.44
/opt/lib32/usr/lib/libnvidia-compiler.so.256.44
/var/lib/pacman/local/nvidia-256.44-1
/var/lib/pacman/local/nvidia-utils-256.44-1
/var/lib/pacman/local/lib32-nvidia-utils-256.44-1
/var/lib/pacman/sync/extra/nvidia-173xx-utils-173.14.27-1
/var/lib/pacman/sync/extra/nvidia-173xx-173.14.27-1
/var/lib/pacman/sync/extra/nvidia-256.44-1
/var/lib/pacman/sync/extra/nvidia-utils-256.44-1
/var/lib/pacman/sync/community/nvidia-cg-toolkit-2.2-4
/var/lib/pacman/sync/community/lib32-nvidia-utils-256.44-1
/var/cache/pacman/pkg/nvidia-utils-256.44-1-x86_64.pkg.tar.xz
/var/cache/pacman/pkg/nvidia-256.44-1-x86_64.pkg.tar.xz
/var/cache/pacman/pkg/lib32-nvidia-utils-256.44-1-x86_64.pkg.tar.xz
Do you have any idea of what should be done to fix it? I don't want to use NVIDIA driver from their site neither nouveau, I want to use the one from the repo. If you know how to solve it, instead of only pointing the solution, also tell why this is happening, it will help me and other people with the same problem too!
If you need additional information please ask me.
Thanks!!
Last edited by ILoveJapaneseGirls (2010-08-07 03:09:55)karol, I'll try to add the section you wrote to the xorg.conf, but first I want to show the log of the crash:
/var/log/Xorg.0.log
[ 69.813]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 69.858]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 69.882] X Protocol Version 11, Revision 0
[ 69.890] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 69.899] Current Operating System: Linux desktop 2.6.34-ARCH #1 SMP PREEMPT Wed Aug 4 14:31:56 CEST 2010 x86_64
[ 69.910] Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/9eb5ef94-284b-4b7e-b824-5c6b0f329fe8 ro quiet
[ 69.921] Build Date: 21 June 2010 12:01:49PM
[ 69.933]
[ 69.944] Current version of pixman: 0.18.2
[ 69.957] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 69.982] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 70.025] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 6 22:35:08 2010
[ 70.057] (==) Using config file: "/etc/X11/xorg.conf"
[ 70.072] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 70.117] (==) ServerLayout "Layout0"
[ 70.117] (**) |-->Screen "Screen0" (0)
[ 70.117] (**) | |-->Monitor "Monitor0"
[ 70.117] (**) | |-->Device "Device0"
[ 70.117] (**) |-->Input Device "Keyboard0"
[ 70.117] (**) |-->Input Device "Mouse0"
[ 70.117] (==) Automatically adding devices
[ 70.118] (==) Automatically enabling devices
[ 70.145] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 70.145] Entry deleted from font path.
[ 70.145] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 70.145] Entry deleted from font path.
[ 70.145] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 70.145] Entry deleted from font path.
[ 70.168] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 70.168] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 70.168] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 70.168] (WW) Disabling Keyboard0
[ 70.168] (WW) Disabling Mouse0
[ 70.168] (II) Loader magic: 0x7ce880
[ 70.168] (II) Module ABI versions:
[ 70.168] X.Org ANSI C Emulation: 0.4
[ 70.168] X.Org Video Driver: 7.0
[ 70.168] X.Org XInput driver : 9.0
[ 70.168] X.Org Server Extension : 3.0
[ 70.185] (--) PCI:*(0:0:5:0) 10de:0240:1043:81cd nVidia Corporation C51PV [GeForce 6150] rev 162, Mem @ 0xfc000000/16777216, 0xd0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[ 70.186] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 70.186] (II) LoadModule: "extmod"
[ 70.200] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 70.211] (II) Module extmod: vendor="X.Org Foundation"
[ 70.211] compiled for 1.8.1.902, module version = 1.0.0
[ 70.211] Module class: X.Org Server Extension
[ 70.211] ABI class: X.Org Server Extension, version 3.0
[ 70.211] (II) Loading extension MIT-SCREEN-SAVER
[ 70.211] (II) Loading extension XFree86-VidModeExtension
[ 70.211] (II) Loading extension XFree86-DGA
[ 70.211] (II) Loading extension DPMS
[ 70.211] (II) Loading extension XVideo
[ 70.211] (II) Loading extension XVideo-MotionCompensation
[ 70.211] (II) Loading extension X-Resource
[ 70.211] (II) LoadModule: "dbe"
[ 70.211] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 70.218] (II) Module dbe: vendor="X.Org Foundation"
[ 70.218] compiled for 1.8.1.902, module version = 1.0.0
[ 70.219] Module class: X.Org Server Extension
[ 70.219] ABI class: X.Org Server Extension, version 3.0
[ 70.219] (II) Loading extension DOUBLE-BUFFER
[ 70.219] (II) LoadModule: "glx"
[ 70.219] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 71.100] (II) Module glx: vendor="NVIDIA Corporation"
[ 71.111] compiled for 4.0.2, module version = 1.0.0
[ 71.111] Module class: X.Org Server Extension
[ 71.111] (II) NVIDIA GLX Module 256.44 Thu Jul 29 01:47:53 PDT 2010
[ 71.111] (II) Loading extension GLX
[ 71.111] (II) LoadModule: "record"
[ 71.111] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 71.125] (II) Module record: vendor="X.Org Foundation"
[ 71.125] compiled for 1.8.1.902, module version = 1.13.0
[ 71.125] Module class: X.Org Server Extension
[ 71.125] ABI class: X.Org Server Extension, version 3.0
[ 71.125] (II) Loading extension RECORD
[ 71.125] (II) LoadModule: "dri"
[ 71.126] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 71.140] (II) Module dri: vendor="X.Org Foundation"
[ 71.140] compiled for 1.8.1.902, module version = 1.0.0
[ 71.140] ABI class: X.Org Server Extension, version 3.0
[ 71.140] (II) Loading extension XFree86-DRI
[ 71.140] (II) LoadModule: "dri2"
[ 71.140] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 71.140] (II) Module dri2: vendor="X.Org Foundation"
[ 71.140] compiled for 1.8.1.902, module version = 1.2.0
[ 71.140] ABI class: X.Org Server Extension, version 3.0
[ 71.140] (II) Loading extension DRI2
[ 71.140] (II) LoadModule: "nvidia"
[ 71.141] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 71.187] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 71.189] compiled for 4.0.2, module version = 1.0.0
[ 71.189] Module class: X.Org Video Driver
[ 71.207] (II) NVIDIA dlloader X Driver 256.44 Thu Jul 29 01:24:51 PDT 2010
[ 71.207] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 71.207] (--) using VT number 7
[ 71.260] (II) Primary Device is: PCI 00@00:05:0
[ 71.269] (II) Loading sub module "fb"
[ 71.269] (II) LoadModule: "fb"
[ 71.269] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 71.281] (II) Module fb: vendor="X.Org Foundation"
[ 71.281] compiled for 1.8.1.902, module version = 1.0.0
[ 71.281] ABI class: X.Org ANSI C Emulation, version 0.4
[ 71.281] (II) Loading sub module "wfb"
[ 71.281] (II) LoadModule: "wfb"
[ 71.281] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 71.289] (II) Module wfb: vendor="X.Org Foundation"
[ 71.289] compiled for 1.8.1.902, module version = 1.0.0
[ 71.289] ABI class: X.Org ANSI C Emulation, version 0.4
[ 71.289] (II) Loading sub module "ramdac"
[ 71.289] (II) LoadModule: "ramdac"
[ 71.289] (II) Module "ramdac" already built-in
[ 71.309] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 71.309] (==) NVIDIA(0): RGB weight 888
[ 71.309] (==) NVIDIA(0): Default visual is TrueColor
[ 71.309] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 71.309] (**) NVIDIA(0): Enabling RENDER acceleration
[ 71.309] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 71.309] (II) NVIDIA(0): enabled.
[ 72.040] (II) NVIDIA(0): NVIDIA GPU GeForce 6150 (C51) at PCI:0:5:0 (GPU-0)
[ 72.040] (--) NVIDIA(0): Memory: 262144 kBytes
[ 72.040] (--) NVIDIA(0): VideoBIOS: 05.51.22.33.07
[ 72.040] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 72.040] (--) NVIDIA(0): Connected display device(s) on GeForce 6150 at PCI:0:5:0:
[ 72.040] (--) NVIDIA(0): LG Electronics L196WTQ (DFP-0)
[ 72.040] (--) NVIDIA(0): LG Electronics L196WTQ (DFP-0): 310.0 MHz maximum pixel clock
[ 72.040] (--) NVIDIA(0): LG Electronics L196WTQ (DFP-0): Internal Dual Link TMDS
[ 72.044] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 72.044] (==) NVIDIA(0):
[ 72.044] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 72.044] (==) NVIDIA(0): will be used as the requested mode.
[ 72.044] (==) NVIDIA(0):
[ 72.044] (II) NVIDIA(0): Validated modes:
[ 72.044] (II) NVIDIA(0): "nvidia-auto-select"
[ 72.044] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[ 72.045] (--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config
[ 72.045] (--) NVIDIA(0): option
[ 72.045] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 72.045] (--) Depth 24 pixmap format is 32 bpp
[ 72.052] (II) NVIDIA(0): Initialized GPU GART.
[ 72.055] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 72.055] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 72.055] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 72.055] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 72.055] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 72.055] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 72.055] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 72.055] (II) NVIDIA(0): Config Options in the README.
[ 72.056] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 72.178] (EE) NVIDIA(0): Failed to allocate primary buffer: out of memory.
[ 72.178] (EE) NVIDIA(0): *** Aborting ***
[ 72.178]
Fatal server error:
[ 72.178] AddScreen/ScreenInit failed for driver 0
[ 72.178]
[ 72.178]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 72.178] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 72.178]
As it's mentioned, it may be a problem of ACPI.
About the lib32-nvidia-utils, I just installed because it's written in the wiki http://wiki.archlinux.org/index.php/NVIDIA#Installing: "Note: On 64 bit systems, For 32-bit programs to take advantage of nvidia-utils you must also install the equivalent lib32 package (for example lib32-nvidia-utils)." -
Failed to load mda_sap.dll when defining connectng BW & BOBJ Designer
Dear BOBJ and SAP Experts,
The following error message occurs when defining a SAP Client connection in BOBJ Designer:
"DBD: An error occurred while trying to load the provider for transport sap. Failed to load library mda_sap. System error message: The specified module could not be found."
We are running BOBJ on a Windows Server 2003 R3 64bit server. The mda_sap.dll file exists in folder: C:\Program Files (x86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86
Please help!
Thanks,
Arwel.Hi,
The BOBJ server currently has the following components installed and in this approximate install order:
.Net Framework 3.5 SP2
JVM 1.6
Business Objects XI3.1 SP3
SAP Integration Kit
SAP Java Connector
We've managed to workaround the MDA_SAP.DLL problem by installing SAPGUI 7.10 (Patch 10), which must contian some DLLs that fix the error. However, this doesn't fix the root cause of the problem, so any advice on a 'true' fix would be much appreciated.
Thanks,
Arwel. -
Hello Everyone,
We are getting an error while trying to create an Universe via Microsoft -> MS Analysis Services 2014 -> OLEDB for OLAP Provider under Connection in UDT -"DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found." We have installed BI 4.1 SP05 in our system. As per earlier posts in scn in BO XI 3.x this issue used to be for improper installation of Integration KIT but in our scenarion Integration KIT is within the BO 4.1 package so no seperate installation is required. Moreover I have checked whether all the driver is present under file: "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\drivers" and seems everything is fine. But still I am getting this error. One important point is we could use IDT because in IDT still we don't have option to connect with 'Microsoft Analysis Services - 2014 (XMLA)' as we are using Microsoft Analysis Services 2014 version.
Kindly help if anyone has faced the same problem with SAP BO 4.1.
Thanks and Best Regards,
GhosalHello Everybody,
The problem is solved now after installing "OLEDB drivers from SQL Server 2012 Feature Pack". We had OLEDB drivers that comes directly from SQL Server but that did not worked out in our case.
Thanks for your support.
Best Regards,
Ghosal -
Oracle License Checking Failing!
Hi,
I am trying to get the JDBC driver for Oracle working but
am getting the following error when I try to use the dbping
utility provided:
java.sql.SQLException: Fail to load jDriver/Oracle due to license checking failed!
There is a copy of the WebLogicLicense.xml file in my WL_HOME directory.
I'm sure I must be missing something really silly - please help!
Thanks!
Sukhy
[att1.html]i have the same problem as the exception u specify. Seems like the dbping cannot
find the license althought i include the path to the xml to my classpath. I am
using Weblogic6.1. Anyone has the idea?
ray
"Utpal" <[email protected]> wrote:
>
>
Please include the path to the WebLogicLicense.xml in your classpath.
-Utpal
"Sukhy Gosal" <[email protected]> wrote in message =
news:[email protected]...
Hi,=20
I am trying to get the JDBC driver for Oracle working but=20
am getting the following error when I try to use the dbping=20
utility provided:=20
java.sql.SQLException: Fail to load jDriver/Oracle due to license =
checking failed!=20
There is a copy of the WebLogicLicense.xml file in my WL_HOME =
directory.=20
I'm sure I must be missing something really silly - please help!=20
Thanks!=20
Sukhy=20
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 5.50.4522.1800" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Please include the path to the <FONT=20
face=3D"Times New Roman" size=3D3>WebLogicLicense.xml in your=20
classpath.</FONT></FONT></DIV>
<DIV>-Utpal</DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Sukhy Gosal" <<A=20
href=3D"mailto:[email protected]">[email protected]</A>> wrote
in =
message=20
<A=20
=
href=3D"news:[email protected]">news:3BAF659C.ADA3BF3B@digita=
s.com</A>...</DIV>Hi,=20
<BR>I am trying to get the JDBC driver for Oracle working but <BR>am
=
getting=20
the following error when I try to use the dbping <BR>utility provided:
=
<P><B>java.sql.SQLException: Fail to load jDriver/Oracle due to =
license=20
checking failed!</B>=20
<P>There is a copy of the WebLogicLicense.xml file in my WL_HOME =
directory.=20
<P>I'm sure I must be missing something really silly - please help!=20
<BR><BR><BR><BR>Thanks! <BR>Sukhy </P></BLOCKQUOTE></BODY></HTML> -
Failed to load database information. Error in {GUID}.rpt
Hi
I have a C# windows service that load a rpt file and export it to PDF
I am required to use XML as data source for the rpt file, and in the IDE of CR 2013 it always works fine via local XML file, and also I create a http/https pages which returns a XML stream, it still works, preview fine.
And then I debug into my unit test project, load the rpt file, set the necessary parameters, and at last call the ReportDocument.Export(), the PDF was generated successfully.
But when I deploy the windows service in my local machine, it always throw out an exception with the error message of “Failed to load database information. Error in {GUID}.rpt” at ReportDocument.Export().
Here is the environment of my local machine:
Windows 7 (64 bit)
NET framework 4.0 / VS2010 build with “Any CPU”
CR2013 with the latest run-time packages for VS
I also have crdb_xml.dll in both of the following paths:
C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win64_x64
C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86
I doubt that I missed something in my environment, is there any suggestions? Thanks a lot!Thank you for your advice!
I have deployed the crdb_xml driver as the steps mentioned in your links, it resolved previous error. Thanks a lot!
But now I encountered another problem, ok, here is my work flow:
1. I create two separate .net pages which return xml stream for my report file, one for main report and the other for the sub report. And these pages need to pass parameters.
2. I create http/https URL xml data source for both the main report and sub report, also I added the parameters in the end of my creation by @prompt function.
3. Then I preview my report, enter the necessary parameters in the pop-up window, and click “OK”, the xml data returned from my URL and displayed correctly in my report.
4. Then I test into my windows service:
1) Create an object of CrystalDecisions.CrystalReports.Engine.ReportDocument() named rptDoc to load my report file.
2) Set parameters to rptDoc via the function of rptDoc.SetParameterValue()
3) Apply my logonInfo and attributes information
4) rptDoc.Export().
Then I got my problem, the parameters did not send to my .net pages all the while, but it is worked fine if I previewed the report in CR 2013 design tool.
Is it the problem that I missed some settings in my .net code or any way CrystalReport.Engine did not support to pass parameters to a report with http/https xml data source?
I am blocked by this issue, any suggestion? Thanks!
For your reference, here is the .net page which is trying to catch the parameters
foreach (var item in Request.Params)
paramsList.Add(item.ToString());
ExceptionManager.InsertException(new Exception(string.Join(",", paramsList)));
BrokerEntity broker = null;
string ifpPSID = Params.ReplaceNullWith(Request["@IFPPSID"], Null.NullString).ToString();
When preview the report in CR 2013 design tool, we get following string for “Request.Params”
“@IFPPSID,ASP.NET_SessionId,ALL_HTTP,ALL_RAW,APPL_MD_PATH,APPL_PHYSICAL_PATH,AUTH_TYPE,AUTH_USER,AUTH_PASSWORD,LOGON_USER,REMOTE_USER,CERT_COOKIE,CERT_FLAGS,CERT_ISSUER,CERT_KEYSIZE,CERT_SECRETKEYSIZE,CERT_SERIALNUMBER,CERT_SERVER_ISSUER,CERT_SERVER_SUBJECT,CERT_SUBJECT,CONTENT_LENGTH,CONTENT_TYPE,GATEWAY_INTERFACE,HTTPS,HTTPS_KEYSIZE,HTTPS_SECRETKEYSIZE,HTTPS_SERVER_ISSUER,HTTPS_SERVER_SUBJECT,INSTANCE_ID,INSTANCE_META_PATH,LOCAL_ADDR,PATH_INFO,PATH_TRANSLATED,QUERY_STRING,REMOTE_ADDR,REMOTE_HOST,REMOTE_PORT,REQUEST_METHOD,SCRIPT_NAME,SERVER_NAME,SERVER_PORT,SERVER_PORT_SECURE,SERVER_PROTOCOL,SERVER_SOFTWARE,URL,HTTP_CONNECTION,HTTP_ACCEPT,HTTP_HOST,HTTP_USER_AGENT,HTTP_FRONT_END_HTTPS”
When run in windows service, we get following string without parameters “@IFPPSID”
“ASP.NET_SessionId,ALL_HTTP,ALL_RAW,APPL_MD_PATH,APPL_PHYSICAL_PATH,AUTH_TYPE,AUTH_USER,AUTH_PASSWORD,LOGON_USER,REMOTE_USER,CERT_COOKIE,CERT_FLAGS,CERT_ISSUER,CERT_KEYSIZE,CERT_SECRETKEYSIZE,CERT_SERIALNUMBER,CERT_SERVER_ISSUER,CERT_SERVER_SUBJECT,CERT_SUBJECT,CONTENT_LENGTH,CONTENT_TYPE,GATEWAY_INTERFACE,HTTPS,HTTPS_KEYSIZE,HTTPS_SECRETKEYSIZE,HTTPS_SERVER_ISSUER,HTTPS_SERVER_SUBJECT,INSTANCE_ID,INSTANCE_META_PATH,LOCAL_ADDR,PATH_INFO,PATH_TRANSLATED,QUERY_STRING,REMOTE_ADDR,REMOTE_HOST,REMOTE_PORT,REQUEST_METHOD,SCRIPT_NAME,SERVER_NAME,SERVER_PORT,SERVER_PORT_SECURE,SERVER_PROTOCOL,SERVER_SOFTWARE,URL,HTTP_CONNECTION,HTTP_ACCEPT,HTTP_HOST,HTTP_USER_AGENT,HTTP_FRONT_END_HTTPS” -
CS: DBDriver failed to load univ connection
Windows 2008 (x64); AIX 6.1; BOXI31 SP3
I remote to a windows 2008 x86 environment where I have the BOXI31 SP3 client apps installed. from here, I import a univ file from an AIX 6.1 server > works fine, however, my connections don't work, keep getting the dreaded;
"CS: DBDriver failed to load : C:\Program Files (x86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\dataAccess\connectionServer\dbd_oci.dll (The specified module could not be found.)"
On my windows server, I do not have any oracle client or db installed....
However, this file (dbd_oci.dll is located at the path specified. Also I can access the CMC and InfoView through a browser > run reports with no errors...
thgts?hi,
Start -> Run -> Please type 'services.msc'
In Services, Please verify whether Oracle related services are started or not.
If they are not started, Please start those services which are prefixed with Oracle.
Now Check the Connection in Universe.
Regarding Oracle 10g Client for 64 bit, following link may be helpful.
Monitoring RFCs on Remote Systems
Regards,
Vamsee
Maybe you are looking for
-
What kind of picture quality can I expect from a Mini DVI adapter to Scart?
I currently have my iMac connected to my tv via the Apple Mini DVI adapter and a composite video cable. There are two problems with this, one is the poor picture quality in general, the other is that the tv screen is not filled by the image from the
-
How do I get all the music on my IMAC in one ITUNES folder? We have one IMAC, with 3 sign ons for me and my 2 teens. When you add a song under one of the sign ons it doesn't add it to all 3 libraries. Before I updated to LION, We had one main librar
-
I have a 2007 macbook and I am wondering what is the best external hard drive for my Mac?
What is the best external hard drive for a 2007 Macbook?
-
Re: Complaint over poor customer service - Broadba...
Just go! I've got them to drop my contract without penalty charges. I ordered BT Infinity2 in September 2012, having been sucked into the 76Mb download speeds dream. I waited weeks for a line to be installed, but was given ordinary broadband with
-
I am unable to download the Elements 11 to my Mac Air.
Once I accept the download Elelements 11, on the Adobe page, the assistant doesn't fire up?? Having rebooted and cleared history, still no go. Any solution?