Bussiness Content Activation error in 0FIGL_O02 [General Ledger: Line Items

Hi Folks
I'm trying to activate the bussiness contents of a DSO named 0FIGL_O02 [General Ledger: Line Items] which belongs to the General Ledger Accounting module.
When i select the DSO "0FIGL_O02" from the select objects of the Bussiness contents, it pops me up with an error stated as below
" Version A of DataStore object 0PP_DS52 does not exist
Message no. RSDODSO102 "
It doesnt even transfer the DSO object to the INSTALL screen in business content even after getting the above error .
What i need to know is that
1. Why did this error occur ?
2. To solve this error , should i raise an OSS note ?
3. What is this object named as "0PP_DS52" in "0FIGL_O02" DSO ?
Need answer - URGENT !
From
Manesh

FIGL takes data from all other modules and reports it to finance. The dependent object 0PP_DS52 needs to be activated it seems for the FIGL settings to get activated

Similar Messages

General Ledger Line items

Hi Expert,
I have a requirement to implement 'Direct/Stocked indicator' on the Daily Sales Report based on the sales order line item and the item category on the line item is the one which determines this scenario. I have used the datasource 0FI_GL_4 to get this report done. The problem with this datasource is the fact that it does not have the link with sales order line item (2lis_11_vaitm) or billing item (2LIS_13_VDITM).
Would you please let me know how do I relate billing item or sales order item with this datasource to solve this problem?
Thanks.

There is no Std cube for GL line items. You need to create ur own cube depending on the requirement and how much of granularity level you would need.

Partial payment in General Ledger Open item

Anybody know how works partial payment in general ledger open item?
For example:
I post a General ledger open item for 100 usd document nº XXXX1 in a Bank account
Then enter incoming payment F-06 transaction, partial payment 50 USD
When i acces to F-06 for a new partial payment selecting by document nº XXXX1, zerop amount appear in field "Partially paid". SAP can't link original open item with partial payment for g/l open item.
For AP and AR open item, partial payment are linked to a original open item using REBZG field, but thsi field doen't exist in BSIS.
There are any way that for g/l open item can use partial payment (partially paid amount appaera correctly linked)?
Thanks. Best regards.

Hi Carlos,
When you do F-06 for the second time
select 2 documents
- nº XXXX1 and
- document posted first time with F-06
Hope it helps
May I know in what scenario, do you need partial payment for GL accounts ?
also try to consider the use of residual payment.
Regards
Sach!n

How to add the line item text in the Ledger line item report

Hi SAP Gurus,
I having one requirement from the user. He wants the line item text which we will enter in FB60/FB70/FB50 has to be shown in the Ledger line item report. Right now this field is not available. Is there any possible we can make this line item text in the ledger line item report i.e. FBL1N/FBL3N/FBL5N?
advance thanks for the help.
Regards,
Deva.

Hi,
You can do the below to get this. (You can change the names of the function modules as per your wish/ organization naming convention):-
Step 1:-
Create function module Z_GET_SGTXT as below:-
Import:-
BELNR LIKE BKPF-BELNR
BUKRS LIKE BKPF-BUKRS
BUZEI LIKE BSEG-BUZEI
GJAHR LIKE BKPF-GJAHR
Export:-
PRCTR LIKE BSEG-SGTXT
FUNCTION Z_GET_SGTXT.
""Local Interface:
*" IMPORTING
*" VALUE(BELNR) LIKE BKPF-BELNR
*" VALUE(BUKRS) LIKE BKPF-BUKRS
*" VALUE(BUZEI) LIKE BSEG-BUZEI
*" VALUE(GJAHR) LIKE BKPF-GJAHR
*" EXPORTING
*" VALUE(SGTXT) LIKE BSEG-SGTXT
SELECT SINGLE SGTXT FROM BSEG INTO SGTXT WHERE GJAHR = GJAHR
AND BELNR = BELNR
AND BUKRS = BUKRS
AND BUZEI = BUZEI.
ENDFUNCTION.
Step 2:-
Then create the Function Modules as below:-
Z_LINE_ITEMS_GET_SGTXT (Copy of SAMPLE_INTERFACE_00001650)
FUNCTION Module Z_LINE_ITEMS_GET_SGTXT.
""Local Interface:
*" IMPORTING
*" VALUE(I_POSTAB) LIKE RFPOS STRUCTURE RFPOS
*" EXPORTING
*" VALUE(E_POSTAB) LIKE RFPOS STRUCTURE RFPOS
Initialize Output by using the following line
E_POSTAB = I_POSTAB.
E_POSTAB = I_POSTAB. "<-- important
CALL FUNCTION 'Z_GET_SGTXT'
EXPORTING
BELNR = I_POSTAB-BELNR
BUKRS = I_POSTAB-BUKRS
BUZEI = I_POSTAB-BUZEI
GJAHR = I_POSTAB-GJAHR
IMPORTING
SGTXT = E_POSTAB-SGTXT
EXCEPTIONS
OTHERS = 1.
ENDFUNCTION.
Step3:-
Transaction FIBF:-
Settings -> Products -> of a Customer
SGTXT Text in Line Item Display Active
Settings -> P/S Module -> of a Customer
00001650 SGTXT Z_LINE_ITEMS_GET_SGTXT
Step 4:-
Create the layout for FBL*N with display of the TEXT.
Regards,
Gaurav

Runtime error in kob5, kob1 and line items display in Cost Analysis in ko03

Hello everyone,
I would like to ask for your expert advice on a situation we need to have a solution. Let me tell you what happened.
In ko88, we tried to settle an internal order to a final asset using 'partial capitalization'. We encountered an error 'Settlement amount is greated than available amount'. I checked in kob5 and we have two line items: 90,000 and 30,000. Both have to be settled to three different final assets namely asset 1, asset 2 and asset 3. The settlement rule was as follows at first:
Line 1: 90,000 to be settled to asset 1, asset 2 and asset 3 at 65,000; 40,000 and 15,000, respectively.
Line 2: 30,000 to be settled to asset 1, asset 2 and asset 3 at 65,000; 40,000 and 15,000, respectively.
Due to the error, we changed the settlement rule following these directions:
1. Remove the settlement rules that we had so we can start anew.
2. Choose the first line item and click on "Final Settlement".
3. Enter the necessary settlement details (total should equal to 90,000 only).
4. Go back and save.
5. Choose the second line item and click on "Final Settlement".
6. Enter the necessary settlement details (total should equal to 30,000).
7. Go back and save.
8. Then, check again the distribution rules set.
Everything was saved and done correctly. So, we tried to do ko88 this time. But, the previous error 'Settlement amount is greated than available amount' still occured.
I went back to kob5 and when I ran it, a runtime error occured. I went to see the actual line items in kob1, and I encountered the same runtime error. I went to see in ko03>cost analysis>the actual debit line items, and I encountered the same runtime error. Were my actual line items lost? How do I retrieve them?
Thanks in advance.
Best regards,
Peter

hi,
check in SAP OSS with the message number you get is there any SAP Notes tobe applied.

Standard report for FI Special Ledger Line Item report

is there any standard report for FI Special Ledger Line Item report

Hi
GD23 for Display of SPL Document
GD13 for Trail Balance of SPL
GCAC for Ledger Comparision
GVTR Balance Carry forward in SPl.
Assign Points if useful.

In COGI error text "Multiple assignment of line item"

Hi Guru,
In COGI error text "Multiple assignment of line item"
Description:
ultiple assignment of a line ID
   Message no. M7357
iagnosis
   An item table, in which the line ID (LINE_ID)
   was transferred to the function module MB_CRE
ystem Response
   Processing is terminated.
rocedure
   Contact the system administration.
rocedure for System Administration
   There is an error in the calling application.
Please help me to resolved this issue.
Thanks and regards
PNU

Hi,
Thanks for reply,
It is possible to remove material from COGI list. We need to stop creation of this error.
Is there other solution to control creation of error "Multiple assignment of line item"
Thanx & regd.
PNU

General Ledger - Open Item Mgt/Line Item Display

Hello Experts,
GL Account was created with no tick in open item mgt and line item display. Business users posted few entries and now realised that the accunt type should be open item manageable and display should be at line item level. Going through the SDN forums, few experts suggested the workaround as follows:
1. Block for posting GL master
2. Make it zero balance in the account(clear existing trans)
3. Run program(SE38) RFSEPA01
4. Check Open Item Check box/Line Item Display
5. Unblock the GL master
6. Continue posting as normal.
However the above solution was recommended for 4.7 or earlier versions and for ECC 6, the recommendation was to open a totally new GL master with correct attributes and block the old GL master.
My client is running ECC 6.2 but requires this corrected asap and I wonder if anyone can suggest a better solution than creating a totally new GL master.
Appreciate quick resolution/advice.
Thanks
Mohammed.

Hi,
Please refer to Sapnote_0001356457_activate OIM, and it mentions in complete details how to handle OIM activation when documents are posted to it.
Regards,
SAPFICO

AIAB Error is showing profit center line item 001 not filled

Dear All,
In Asset Account while posting AIAB t.code system is showing error
Balancing field "Profit center" in line item 001 not filled.
Message no. GL2201
Diagnosis.
The profit center marked as balancing is not filled with any value in line item 001, even after document splitting
System response
The document cant be posted
Procedure
First check your entry.
additional causes could be:
.No value can be derived for this field from the current document data.
.You have entered a document type that is not designed for this business purpose.
previously it is coming correct now we are splitting two company codes means previously company code 0555 now we are splitting and creating another company code 0666 in that company only it is showing the error.
Regards,
Teja

Hi
Did you maintain cost object in your asset master
And does your IMG settings for the new co are in place to refer Cost Obects from asset master for Purchase and depreciation transactions
you do this in the IMG Step "Integration with General Ledger"
Regards
Ajay M

Invalid session error when trying to transfer line items to shopping basket

Hi All,
I have a requirement in E-Commerce application.
when a user searches for a product in B2B webshop in 'products' tab in left frame, search results table get displayed which will have a shopping basket icon for each line item.
There we can transfer only a single item to shopping basket.
if we want to transfer more than one item, again shopping basket icon has to be clicked..
Now my requirement is that I have to add check boxes before each line item and a button below the results table ,so that when it is cliked, all the checked items should move to shopping basket in a shot.
I added a button and called '/catalog/updateitems.do' (onclick of buttton) which is the action called when 'transferselection' button in 'productISA.jsp' is clicked.
Now I am getting an error saying 'Invalid session' when that button is clicked. I am not able to guess the reason.
And also I want to ask experts, is this the correct way of proceeding for the requirement ?
I am new to E-Commerce and any pointers in this regard will be of great help.
Thanks,
Anasuya.

Hello Anasuya,
Any reason why Catalog is not used but "Product" search list is used in the process? Catalog gives a more organized way of displaying and searching capabilities and makes the buying experience simple. Product search is a convenience tool for power users when you know the product.
Without major UI changes - like de-framing, the use of Product search for "Add to Cart" of all "selected" products from search list will not excite the end users. Catalog is a powerful tool that is available to you. Unless you have a strong business reason, it is better to use the features the way they are intended. You need to go back to the drawing board with your customer.
Anyway, I am assuming that you are doing a POC. I will give the same help I provided for your previous message on a similar topic. Re: Null poiner exception when trying to store extension data in existing BO. We need to understand the basics of Servlet / JSP. Just adding any action (calling servlet) from any page (JSP) may not help. We must understand that the action (servlet) may be expecting many values in the request context which is available in the page (JSP) it was placed in. If that action is blindly placed in another page, it is highly unlikely that it will work, unless, you also took the pain to provide the servlet behind that action with the data it is expecting. So, adding the action from _'productsISA.jsp' _ in organizer-content-product-search1.jsp will have bad results. If you have done the required changes to the JSP, then let us know the changes you have done to really understand the issue.
If you have not done so, here is what you can do for the POC. If you look at the JSP organizer-content-product-search1.jsp, it doesn't have any useful <INPUT tags that would pass on the Product data to the servlet. So
Surround the product (tech key) with <Input tag. (Hint: see productISA.jsp)
I am sure you already have this for the quantity1 and the new checkbox.
Add a button to a custom action.
inside the custom action read all the items and create a simple Java List of BasketTransferItem. Use BasketTransferItemImpl to actually use the instance.
Use methods setProductKey(String techKey), setQuantity(String quantity) and if you know the UoM use setUnit(String unit) to set the BasketTransferItemImpl object.
Add each instance of BasketTransferItem to the java List.
Now, place this list object in the request context under the attribute name baskettransferitemlist.
On success forward to "addtodocument"
Make proper changes to config.xml
I hope this will work without much changes.
(Note: This is not a cake served in a plate, but just a tested recipe for the cake. Please cook it nicely. If you need the cake immediately, then hire a Chef! - )
Easwar Ram
http://www.parxlns.com

Cost Center Error in Shopping cart Multi Line items

Hi,
We are working on SRM 4.0. when the user is trying to create a shopping cart from catalog he gets the error message as
"you don't have the acces to the cost object xyz12.please return to the cost assignment section and correct".
We have given the access to that cost center in SRM even also he is getting the same error.
He does not have any problem with single line item against the same cost center. problem gets only when he is going to create with multiple line items in shopping cart against the same cost center.
Request all please advise me where i need to check to overcome the issue.
Regards,
Sri

Hi,
Thanks for your kind response. can you please elaborate bit more step by step.
Awaiting for your feedback.
Regards,
sri

Cash Journal : Error "Inconsistent amounts" during a line items reversal

Dear Experts,
i have posted a line item in Cash Journal.
now when i m trying to delete/reverse it, i m observing a error "Inconsistent amounts" that leads to a ABAP dumb "FMGL_CHECK_PERIODS_REV_REAL" i have dowloaded & applied a note from SAP 1247225, but could not fix the error.
please advice & help me out.

Hi Hussein
In addition to the application of the note using SNOTE
you would also need to perform the following manual steps (configuration)
Call transaction SM30 and change the following entries in the table TRWPR:
PROCESS EVENT    SUBNO COMPONENT KZ_BLG FUNCTION
DOCUMENT PREREV 190   EAFM             FMGL_CHECK_PERIODS_REV_REAL
becomes
DOCUMENT PREREV 190   EAFM             FMFA_CHECK_PERIODS_REV_REAL_CK
DOCUMENT REVERSE 065 EAFM             FMGL_CHECK_PERIODS_REV_REAL
becomes
DOCUMENT REVERSE 065 EAFM             FMFA_CHECK_PERIODS_REV_REAL
Regards
Sach!n

Table for non ledger line items

hi
Iam pulling the report for non leading ledger with T code FAGLB03 and found 2 cost objects(cost center and WBSE) in line items whereas for leading ledger only WBSE is showing. We know that for leading ledger entries are maintained in table FAGLFLEXT. From which table non leading ledger entries gets pulled. Your early response is appreciated.
In the entry view cost center is there but in GL view cost center is not populated.

Thanks Bhandari
But user posting with 2 real objects (WBSE and CC) for which only WBSE is updating in total table. When i run line item report using FAGLB03, both objects are showing for non leading ledger similar to FS10N. But only WBSE is showing for leading ledger. Is FAGLB03 derive the data from BSEG table for non leading ledger.
Thanks
Venkatesh

Error when posting Open AR Line Items

hello iam posting Open AR Line Items for contract account using message type
CTRACDOCUMENT_CREATE using lsmw idoc method .iam getting error as Document type not defined but actually when iam creating document manually item is created with out any error that means it is defined and my functional consultant is also saying he defined document type.can some body explain me what is the problem.
Regards
priya

Hi Priya,
As you are using the Idoc method, is the Partner profile correctly defined.
Please could you elaborate your error in a bit more detail.

BI Content Activation Error in Routines

Hello Gurus,
When I am activating transformations for SRM 5.0 BI data flow, we received following errors in routines
Object '4A41TQSJKSQAXL7KUH18UHY26' (ROUT) not in active version 'A'.
Could anyone suggest process to find specific routine using technical name? This information is required to find, which infoprovider/transformation mapping is having this routine.
We are unable to find this routine by technical name in BI content. So if we know corresponding Infoprovider or Transformation technical name, we can try to re-install the same.
Would really appreciate any inputs in this regard.
Best Regards
Venkat
Edited by: Siegfried Szameitat on Oct 28, 2008 4:45 PM
Deleted your promise to assign points as it is against the rules.

Hi,
if this is a routine used in a transformation check out table rstransteprout with the ID of the routine and then take the transformation ID and look into table RSTRAN. There you will find information about the source and the target of the transformation.
Best regards
Christoph Vortkamp

Bussiness Content Activation error in 0FIGL_O02 [General Ledger: Line Items

Similar Messages

Maybe you are looking for