Button/tab page selections fail to respond
we have a number of web-sites built with VS 2012 that normally run okay, but on occasion internal tab or button selections that usually result in a page change within the application fail to respond. When this occurs the mouse
over will display the text "javascript;" instead of expected URL name. Since it is only occasional and not all the time, I suspect it may have something to do with physical server load balancing, in that the URL is set to work on
most of the servers where others may not have been configured the exact same when chosen or possibly it has to do with a server being too busy at the time, but would expect an error or wait message instead of a lack of response. Is there an explanation
and fix for this behavior?
Hi,
Tools>Internet Options>Security tab, click "Reset all zones to default".
"When this occurs the mouse over will display the text "javascript;" instead of expected URL name. "
indicates either
Active Scripting is disabled in the zone where the site maps to (File>Properties)
or
Your AV product has disabled Active Scripting (javascript).
To avoid confusing error messages and links 'not working' add <noscript> tags to your web pages.
If possible please include a link to your website or a mashup with your questions.
Regards.
Rob^_^
Similar Messages
-
Hi All
I've posted this question a short while ago, but had no response, so I'm trying again with a very stripped down piece of code.
The attached vi is a simple one. It simply scrolls through 2 pages with a tab control, and reutrns to front page.
I'm using the pane "mouse down" event to do the above.
What I'm trying to do (with no success) is run a piece of code everytime page 2 is selected (at the moment I'm trying to turn on an LED).
Could somebody please give me a clue as to how ro do it?
Caveat.....must keep the pane "mouse down" event for page selection.
Thanks for any help
Regards
Ray
Solved!
Go to Solution.
Attachments:
TabControl.vi 17 KBRavens Fan
The code that was posted by Anan works if using the tab control to change pages.
Unfortunately, I cannot use the tab control to fire an event to change pages.
The postings seem to be wandering off my original post (or I'm really missing something in the above missives).
Let me try another approach.
The application this code is for is a large screen display on public viewing. The public do not (and should not) have access to a mouse or keyboard. In fact, the ONLY cobtrol to the screen for public uses is a mom push-button switch.
When the vi starts the mouse cursor (see my other posting) could be anywhere on the screen, and no way of guiding it to the tab controls at the top of the FP.
Therefore the client wants the public to use the PB switch to scroll through the pages...one after another. There will eventually be 4 pages of information and displays for public consumption.
The last page of the display will play a short movie (<30 seconds).
I hope that gives a clearer picture of why I need to use the pane "mouse down" event to change pages......
Thanks for your interest guys
Ray -
Trigger for Tab page selection
Hi all,
I have a form with a tab canvas with 3 tab pages. I have a multi record block in an tab page and I need to refresh the data in that block when i select the tab page. I have put the execute_query in when-new-block-instance of that block but, its not working. It will get queried only after i click on any fields of that block.
Any ideas??
With Regards,
Yathishcheck this sample code used in when-tab-page-changed, topmost_tab_page value is what you need to know:
DECLARE
tp_nm VARCHAR2(30);
tp_id TAB_PAGE;
tp_lb VARCHAR2(30);
BEGIN
tp_nm := GET_CANVAS_PROPERTY('emp_cvs', topmost_tab_page);
tp_id := FIND_TAB_PAGE(tp_nm);
tp_lb := GET_TAB_PAGE_PROPERTY(tp_id, label);
IF tp_lb LIKE 'Sa%' THEN
SET_TAB_PAGE_PROPERTY(tp_id, label, 'SALARY');
ELSIF tp_lb LIKE 'Va%' THEN
SET_TAB_PAGE_PROPERTY(tp_id, label, 'VACATION');
ELSE null;
END IF;
END;
Message was edited by:
Rondelek -
I can get past mobile telephone selection (failed to respond)
After putting in my info and clicking next I get the error message "fail to repspond". Anybody else have this issue?
Mine finally went through. Just keep hitting the button to process, it will eventually sneak in. Once I got past that, no problems.
Preorder on Apple Site - easy peasy.
Preorder on Verizon Site - 3 hours of frustration.
Rob Doherty, an analyst with Envisioneering Group, told USA Today that the iPhone will be Verizon Wireless' best seller. "Verizon has never had that kind of a hit before. The last phone to sell out was the MotorolaRazr back in 2006, and I don't know if they're really ready to handle this kind of traffic."
The company, however, says it can.
"We've been working on this for a very long time," John Stratton, Verizon Wireless chief operating officer, told USA Today. "We expect unprecedented demand, bigger than anything we've ever seen before. We feel good about being able to handle it."
Read more: Verizon says it's ready for iPhone rush | Sacramento Business Journal
Whoops. -
Unable to add Tab Pages in EH&S Configuring Tab Pages
Hi,
I am working on Integration of Time Management with Industrial Hygiene and Safety.
In EH&S configuration under Industrial Hygiene and safety /Basic Settings/Configure Tab Pages ,When I select Object Type with work Area as 'AFP - Data on person affected' , I get the list of following tabs
DESC Treatment
INJURY Injury/Illness
REPT Ind Hyg. Safety Data
I cannot see the TDAT Time Data, when I tried to add new tabs , I can list the Time Data tab , but I cannot populate the selected Time data tab in the configuration.
Please let me know if I need to do more settings and what settings should I do for this tab to appear.
Please help me to resolve this issue asap.
Thanks,
BabithaHi
With SAP ECC 6.0 YOu must me having EHS 3.2
With this TDAT comes as default setting,
Although if it is not there what you can do is, Go to configure tab pages select object type work area as AFP. Click on append button. You will get field selection Client, Tab, Description. You tick mark on Clent and Tab. Select client 000 and Tab -TDAT and click on append.
Hope this will work.
Other wise if you wont to add new TAB you have to go to IMG activity "Assign Value Assignment Types to Classes "
Create value assignment type, Give vategory, assign class then match up master data This will create new tab page. You have to create characteristics for the fields you want under this tab page.See the SAP help for this. Pl note that you can not create new tab using Configure tab pages.
Regards
Suhas -
Detecting the current tab page
Hello All,
I am working on a task for our current project which requires that I correctly identify the
current tab page selected on the user's page.
Toward that, I was passed some information about the function:
wwpob_api_page
function get_selected_tabs( p_pageid in number,
p_store in wwsto_api_session,
p_tabstring in varchar2,
p_tabviewprivs in out wwsbr_type.boolarray,
p_pages in out page_table,
p_base in boolean
return varchar2;
which appeared in version 3.0.6.X.
I was unable to locate this function in the 3.0.7 / 3.0.8 api installed on our machine, but since I
only have access to view the public interface of this package, and wondered if this function was
still available.
Has the function been moved, or included elsewhere, or deleted?
The success of this task depends on having a reliable way to determine which tab page is
currently selected/viewable.
Is there another / better method for accomplishing this?
Any help would be most appreciated.
Stuart DautrichThat isn't a supported API yet. I'm not aware of any current functionality that will allow you to find the current tab.
-
Firefox STILL does not open the home page when a new tab is selected
I have just 'upgraded' to FF4 and expected that the irritating 'new tab homepage load situation' would have been resolved by now: sadly, it looks to STILL be around.
MS IE has been loading the homepage DIRECTLY when a new tab is selected for about FOUR YEARS now, so I'm staggered that such a simple but very useful feature is not available in Firefox.
The obvious question is WHY??
In IE, you don't have to keep hitting the home page button to carry out a search in google when a new tab is selected, and IE does NOT need an 'add-on' to incorporate this functionality; it really is quite irritating that the function is still not built-in to FF, and the coding requiret to incorporate the function ain't rocked science Mozilla people - WHY has this not been put into effect by now?Some people prefer a blank tab because it takes no time to load. Some people prefer their home page. Some people prefer a list of most frequently used sites. It would be convenient if all of these options were built in, but obviously no one stepped up and made it a priority.
By the way, another way to search in a new tab is: Using the search box (on the toolbar), after typing your query, either press Alt+Enter or Ctrl+click the magnifying glass. This opens the search in a new tab and saves that step. -
Hello,
I have a Mac that's fast as lightning running on the latest version of OS X. I use eBay A LOT. In the newest version of Firefox that I just downloaded when I hit the back button it takes me to the original "new tab" page. Please don't make me use Chrome or Safari, I love you guysThank you for your kind words on the Tablet, as this is the only product mentioned that is supported on this forum, The forums here are for Home Electronics and Computers, and do not reach the Sony smart phone community.
The Sony smart phone Support Forum is the place for Sony (formerly Sony Ericsson) users from around the world to get help and help others:
your very in depth suggestions and comments would best be heard at the following forum that is dedicated exclusively to the Sony smart phone community.
http://talk.sonyericsson.com/community/support -
I recently installed utorrent.The problem started after that.The home page is Google, but on opening a new tab, I don't get the thumbnails that is usually displayed, instead search.conduit page is opened.How can I get my old settings back? I even uninstalled utorrent to see if this problem goes away, but it doesn't.
Thank you, but I was able to solve the problem already. There was a button named "Remove" just below the space where we enter the item to be searched in a search engine. On clicking this, I was able to return to the original new tab page. I wasn't being trigger happy while installing utorrent, there was nothing there indicating that conduit will be installed. Nevertheless, thanks a lot for trying to help me in solving my problem.
-
New macbook pro fail to respond to the power button
Why did my new macbook pro fail to respond to the power button?
I have a new 13" MacBook Pro Retina (10.9.1) which I have been using for about 3 weeks. I am new to Mac and am in the process of making the transition from Windows XP.
Today, with the battery at 100% and the power lead disconnected, I left the mac with the lid closed but, when I returned, it did not come back to like when I opened the lid. Also, it would not respond to the power button.
After some web searching, I managed to get it back to life after resetting the SMC.
Is this a software problem, or is it more likely to be a hardware problem?Highly unlikely that software is involved - especially since resetting the SMC corrected the problem.
Unless it happens again, I would forget it. If it occurs again, take it in for warranty service.
Barry -
I installed OS X Mountain Lion on my desktop MAC and since then I cannot print pdf documents---I get messages like "plug in failed" or sometimes "no pages selected on printer" when clearly pages are selected
DO NOT USE PREVIEW TO FILL OUT PDF FORMS, IT WILL DESTROY PDF FILES. Sorry, but I had to shout here to prevent damage to your PDF files.
Here is one of the symptoms when you fill out a PDF form with Preview: If you save it and return it to the author, they will not be able to see the text that you've added to form fields - unless they click on a field, which will reveal the contents of just that field. You can recover from this problem, but Preview will also remove other field types, and will actually rewrite your complete PDF while ignoring what it does not understand. Take a look at this blog post for more information about the damage that Preview will cause: Preview.app - Killer of PDF Files -
Safari cannot open the page as the server fails to respond
safari cannot open the page as the server fails to respond? i am getting this message and safari is not working
My 2nd gen works fine with WPA2 and AES encryption.
You may need to go back and start over. Reset the router back to factory defaults, log on as the admin, set up security, DHCP, and make sure the IP address pool has enough IP addresses to lease to ALL of the computers/devices that will connect to that the router. -
Use of Active Button in Header Condition Tab Page
Dear Friends
What is use Active button and what it work in Sales Doct Header Condition Tab page
Thanking you
ArunHi,
When you if enter a header condition type for e.g HB00 & enter the amount & click on activate, then it will activate the condition type in the pricing document.
Hope it will solve your problem.
Regds........
Sumit
Edited by: Sumit Rayaguru on Feb 9, 2009 7:22 AM -
Hide Tab in Selection Screen After Pressing Button
Hiii All..
My requirement is I have to disable the tab in the selection screen when the user presses the button 'Disable Tabstrip' which is present in Application toolbar..
And it should come back if the user presses another button 'Enable Tabstrip' and that time the above screen should hide.
I am showing u the screen..
Link : [https://www.filesanywhere.com/FS/M.aspx?v=8972698c58616eb771af]
If anyone knows then please help.
Regards,
Jhings.Thanks For the reply Anju...
But the problem is.. this selection screen is not the default screen.. this is user defined screen.. and SY-UCOMM is not giving any value on the "AT SELECTION SCREEN OUTPUT" Event..
I am giving u the code.. How I defined this..
* This is screen where we are inclucing tab screen
SELECTION-SCREEN : BEGIN OF SCREEN 100.
SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-005.
SELECTION-SCREEN : BEGIN OF LINE.
SELECTION-SCREEN : COMMENT 1(15) CUS_TXT.
SELECT-OPTIONS : CUST_ID FOR VBAK-KUNNR.
SELECTION-SCREEN : PUSHBUTTON 79(20) BUT1 USER-COMMAND CLICK1 VISIBLE LENGTH 20.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE.
SELECTION-SCREEN : COMMENT 1(15) MAT_TXT.
SELECT-OPTIONS : MATNR FOR VBAP-MATNR.
SELECTION-SCREEN : PUSHBUTTON 79(20) BUT2 USER-COMMAND CLICK2 VISIBLE LENGTH 20.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE.
SELECTION-SCREEN : COMMENT 1(15) CRE_TXT.
SELECT-OPTIONS : CRE_BY FOR VBAK-ERNAM.
SELECTION-SCREEN : PUSHBUTTON 79(20) BUT3 USER-COMMAND CLICK3 VISIBLE LENGTH 20.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE.
PARAMETERS : A AS CHECKBOX USER-COMMAND UC.
SELECTION-SCREEN : COMMENT 5(33) CHK_TXT.
PARAMETERS: NUM TYPE I MODIF ID M1.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN: END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF TABBED BLOCK T1 FOR 20 LINES.
SELECTION-SCREEN TAB (10) NAME1 USER-COMMAND UCOMM1 DEFAULT SCREEN 101.
SELECTION-SCREEN TAB (20) NAME2 USER-COMMAND UCOMM2 DEFAULT SCREEN 102.
SELECTION-SCREEN TAB (30) NAME3 USER-COMMAND UCOMM3 DEFAULT SCREEN 103.
SELECTION-SCREEN END OF BLOCK T1.
SELECTION-SCREEN: FUNCTION KEY 1,
FUNCTION KEY 2.
SELECTION-SCREEN : END OF SCREEN 100.
* These are subscreens
SELECTION-SCREEN : BEGIN OF SCREEN 101 AS SUBSCREEN.
SELECTION-SCREEN : BEGIN OF BLOCK B6 WITH FRAME TITLE TEXT-006.
PARAMETERS : CUS_NAM1(30) TYPE C,
CONTACT1(12) TYPE C,
CITY1(30) TYPE C.
SELECTION-SCREEN : SKIP.
SELECTION-SCREEN : PUSHBUTTON 1(20) BUT11 USER-COMMAND CLICK11 VISIBLE LENGTH 10.
SELECTION-SCREEN : PUSHBUTTON 25(20) BUT12 USER-COMMAND CLICK12 VISIBLE LENGTH 10.
SELECTION-SCREEN: END OF BLOCK B6.
SELECTION-SCREEN : END OF SCREEN 101.
SELECTION-SCREEN : BEGIN OF SCREEN 102 AS SUBSCREEN.
SELECTION-SCREEN : BEGIN OF BLOCK B7 WITH FRAME TITLE TEXT-007.
PARAMETERS : MAT_DES1(30) TYPE C MODIF ID M1,
UNT1(12) TYPE C MODIF ID M1,
MAT_TYP1(30) TYPE C MODIF ID M1.
SELECTION-SCREEN : SKIP.
SELECTION-SCREEN : PUSHBUTTON 1(20) BUT13 USER-COMMAND CLICK13 VISIBLE LENGTH 10.
SELECTION-SCREEN : PUSHBUTTON 25(20) BUT14 USER-COMMAND CLICK14 VISIBLE LENGTH 10.
SELECTION-SCREEN: END OF BLOCK B7.
SELECTION-SCREEN : END OF SCREEN 102.
SELECTION-SCREEN : BEGIN OF SCREEN 103 AS SUBSCREEN.
SELECTION-SCREEN : BEGIN OF BLOCK B8 WITH FRAME TITLE TEXT-008.
PARAMETERS : F_NAM1(30) TYPE C MODIF ID M1,
L_NAM1(12) TYPE C MODIF ID M1,
C_NO1(30) TYPE C MODIF ID M1.
SELECTION-SCREEN : SKIP.
SELECTION-SCREEN : PUSHBUTTON 1(20) BUT15 USER-COMMAND CLICK15 VISIBLE LENGTH 10.
SELECTION-SCREEN : PUSHBUTTON 25(20) BUT16 USER-COMMAND CLICK16 VISIBLE LENGTH 10.
SELECTION-SCREEN: END OF BLOCK B8.
SELECTION-SCREEN : END OF SCREEN 103.
Hope This could help u..
Regards,
Jhings -
Tab pages not changed when selecting from TAB LIST
Hi All,
I have a form which has 15 tabs, 1st 10 Tabs are dynamic (enabled at new form instance, depending on configuration) and 11 to 15 are Static tabs visible for all.
My problem is when i am clicking on tabs iam able to switch tabs, but when I select tab from Tab List I am not going to the selected TAB.
Ex: when I am in TAB 1 and Select TAB15 from Tab list My form Still Stays in TAB1 and not moving to TAB 15
Please provide me a Solution.
My code in WHEN TAB PAGE CHANGED is
DECLARE
l_curr_rec NUMBER;
BEGIN
l_curr_rec := :SYSTEM.CURSOR_RECORD;
--Get the Top Default Tab Page for the Form
SHOW_VIEW('HDR_CANVAS_FIXED');
:global.headers:=GET_CANVAS_PROPERTY('TAB_CANVAS', topmost_tab_page);
IF(:GLOBAL.HEADERS='AS_REC_IMAGE')THEN
SHOW_VIEW('AS_REC_IMAGE');
SET_VIEW_PROPERTY('AS_REC_IMAGE',VISIBLE,PROPERTY_TRUE);
SET_TAB_PAGE_PROPERTY('AS_REC_IMAGE',ENABLED,PROPERTY_TRUE);
GO_BLOCK('AS_REC');
--Hide the other canvases except the Pricing Canvas
ELSIF(:GLOBAL.HEADERS='TRIM_REC_IMAGE')THEN
SHOW_VIEW('TRIM_REC_IMAGE');
SET_VIEW_PROPERTY('TRIM_REC_IMAGE',VISIBLE,PROPERTY_TRUE);
SET_TAB_PAGE_PROPERTY('TRIM_REC_IMAGE',ENABLED,PROPERTY_TRUE);
GO_BLOCK('TRIM_REC');
--Hide the other canvases except the Pricing Canvas
ELSIF(:GLOBAL.HEADERS='AS_SHIP_IMAGE')THEN
SHOW_VIEW('AS_SHIP_IMAGE');
SET_VIEW_PROPERTY('AS_SHIP_IMAGE',VISIBLE,PROPERTY_TRUE);
SET_TAB_PAGE_PROPERTY('AS_SHIP_IMAGE',ENABLED,PROPERTY_TRUE);
GO_BLOCK('AS_SHIP');
--Hide the other canvases except the Pricing Canvas
ELSIF(:GLOBAL.HEADERS='TRIM_SHIP_IMAGE')THEN
SHOW_VIEW('TRIM_SHIP_IMAGE');
SET_VIEW_PROPERTY('TRIM_SHIP_IMAGE',VISIBLE,PROPERTY_TRUE);
SET_TAB_PAGE_PROPERTY('TRIM_SHIP_IMAGE',ENABLED,PROPERTY_TRUE);
GO_BLOCK('TRIM_SHIP');
--Hide the other canvases except the Pricing Canvas
ELSIF(:GLOBAL.HEADERS='EXTRA')THEN
---Show the Export Canvas---------
SHOW_VIEW('EXTRA');
SET_VIEW_PROPERTY('EXTRA',VISIBLE,PROPERTY_TRUE);
SET_TAB_PAGE_PROPERTY('EXTRA',ENABLED,PROPERTY_TRUE);
GO_BLOCK('EXTRA');
--Hide the other canvases except the Pricing Canvas
ELSE -- DYNAMIC TABS
--Hide all the other static canvases
IF (:GLOBAL.HEADERS='CT01')THEN
GO_BLOCK('CT01');
ELSIF (:GLOBAL.HEADERS='CT02')THEN
GO_BLOCK('CT02');
ELSIF (:GLOBAL.HEADERS='CT03')THEN
GO_BLOCK('CT03');
ELSIF (:GLOBAL.HEADERS='CT04')THEN
GO_BLOCK('CT04');
ELSIF (:GLOBAL.HEADERS='CT05')THEN
GO_BLOCK('CT05');
ELSIF (:GLOBAL.HEADERS='CT06')THEN
GO_BLOCK('CT06');
ELSIF (:GLOBAL.HEADERS='CT07')THEN
GO_BLOCK('CT07');
ELSIF (:GLOBAL.HEADERS='CT08')THEN
GO_BLOCK('CT08');
ELSIF (:GLOBAL.HEADERS='CT09')THEN
GO_BLOCK('CT09');
ELSE --ELSIF (:GLOBAL.HEADERS='CT10')THEN
GO_BLOCK('CT10');
END IF;
END IF;
END;
Thanks,
Durga Srinivas.
Edited by: DurgaSrinivas_886836 on Dec 3, 2012 8:12 PMIn your trigger, you are doing a SHOW_VIEW ('HDR_CANVAS_FIXED'); before you select the :GLOBAL.HEADERS information. I'm not sure what HDR_CANVAS_FIXED is, but I am wondering if that is what is messing you up. What happens if you either comment that out:
DECLARE
l_curr_rec NUMBER;
BEGIN
l_curr_rec := :SYSTEM.CURSOR_RECORD;
--Get the Top Default Tab Page for the Form
--SHOW_VIEW ('HDR_CANVAS_FIXED'); /* <-------------------------------------------------------Comment it out */
:global.headers := GET_CANVAS_PROPERTY ('TAB_CANVAS', topmost_tab_page);
IF (:GLOBAL.HEADERS = 'AS_REC_IMAGE') THEN
SHOW_VIEW ('AS_REC_IMAGE');
.or if it is necessary move it to after the :GLOBAL.HEADERS:
DECLARE
l_curr_rec NUMBER;
BEGIN
l_curr_rec := :SYSTEM.CURSOR_RECORD;
--Get the Top Default Tab Page for the Form
:global.headers := GET_CANVAS_PROPERTY ('TAB_CANVAS', topmost_tab_page);
SHOW_VIEW ('HDR_CANVAS_FIXED'); /* <------------------------------------ Swap it with :global.headers */
IF (:GLOBAL.HEADERS = 'AS_REC_IMAGE') THEN
SHOW_VIEW ('AS_REC_IMAGE');
SET_VIEW_PROPERTY ('AS_REC_IMAGE', VISIBLE, PROPERTY_TRUE);
SET_TAB_PAGE_PROPERTY ('AS_REC_IMAGE', ENABLED, PROPERTY_TRUE);
GO_BLOCK ('AS_REC');
--Hide the other canvases except the Pricing Canvas
ELSIF (:GLOBAL.HEADERS = 'TRIM_REC_IMAGE') THEN
SHOW_VIEW ('TRIM_REC_IMAGE');
.
Maybe you are looking for
-
Export problem "A serious error has occured", or hang, upon export to Encore.
Hello, I am using adobe Premiere CS3 3.2 I am trying to export my project to a DVD. I've been told that the best way to do this with minimizing quality loss is to export to Encore. My project has some filters that affect system memory and have locke
-
How to consolidate library in new iTunes
Since the new iTunes with the Genius, I don't know where the option to consolidate the library is. It's really annoying, anyone know?
-
Is there some way that iTunes will scan through My Music folder (i.e. source folder) every time I open iTunes to see if there is some new music file that I have added and then automatically add it to iTunes? At the moment, if I get a few music files,
-
Burning a bootable Lion dvd, how to?
Hi I want to burn a copy of Lion to DVD to have a bootable copy at hand. I found instructions here how to do this: http://techland.time.com/2011/06/17/how-to-burn-an-os-x-lion-boot-disc/ However I follow the steps: > 2. Open the "Contents" folder, th
-
Script: chrome://global/content/bindings/textbox.xml:146 message appears when starting firefox or even on facebood and then when i goto farm town