Buttons inside moveiclip not accessible

Hi,
I am making this website, which contains a load file, which contains a movieclip holder, which holds all the different parts of the website.
Now within the portfolio.swf, which is within mcholdr, inside load.swf, there are several images, which are buttons. On clicking one image, I have code which dims, i.e. reduces _alpha for all the buttons and disables them. Now when I test portfolio.swf alone, this code works, but when I access portfolio.swf through load.swf, the code is not working.
The code within each image button inside portfolio.swf is:
while (i<=29) {
 _root.folioholdermc["img"+i]._alpha = 20;
 _root.folioholdermc["img"+i].enabled = false;
 i++;
img1 to img20 are the image buttons. They are placed within folioholdermc, which in inside portfolio.swf.
Structure with portfolio.swf alone : Main timeline ------> folioholdermc -------> img1 to img20
Now through load.swf is : Main timeline --------> mc_load -----------> portfolio.swf (loaded with MovieClipLoader)
I tried everything from
_root.mc_load.folioholdermc[img....
folioholdermc[img.....
Nothing works. Is this a path problem??? How do I access these buttons?? I want to use the loop, as there are many buttons, so a simple img1._alpha will not work, as I will have to type this out for each button. How can I get the same effect using the loop??
Thanks

If I'm interpretting your posting correctly, it ilikely you have an issue using _root references. Unless specified otherwise, if you load an swf file that uses _root references, those _root references will target the main file's _root. To get around this you probably need to implement _lockroot in the files that you are loading. Look it up in the AS2 help files. In your case it may be as simple as adding the following to the main timeline of the file(s) you load...
this._lockroot = true;

Similar Messages

HT5704 Since updating to iOS 6.1.3 on my iPhone there have been odd sim card messages, and now my wifi button in settings is not accessible. Also huge battery and data drain. Any suggestions?

Since updating to iOS 6.1.3 on my iPhone there have been odd sim card messages, and now my wifi button in settings is not accessible and turned off. Also huge battery and data drain. Any suggestions?

Hi imobl,
Thanks for your response, I forgot to add that the five 3uk sims we have in use, I have tried all of them none of them are recongnised non of them have pin codes, I even purchased four more sims Tmobile (original carrier) Vodaphone, 3 and giffgaff.

I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed.Help

I have an olde iMac that once I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed. Please advise as to what could be the problem. How to fix. Thanks

Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

MovieClip buttons inside a MovieClip button inside another MovieClip button

I am trying to make a Portfolio of my study abroad experience and can get something right about the movie clip buttons inside each other. I have a button to click on titled "travel" and a window shows up with more movieclip buttons to organize different locations of pictures. I can click on the button to have to slide of pictures but nothing happens. I have the "turnOffAllButtons" coding and also have the coding for stay clicked, but I can't get the 3rd set to show up. what am i not doing?
I don't have any errors or output comments showing up

I have it working now. what I did, I make a slideshow setup (gotoAndStop(1);) in a specific frame and the code I put in for the next, didnt work.
this is was I have now, without the "turnOffAllButtons" coding:
Main Button (actions Layer):
stop();
travelButton_mc.buttonMode=true;
travelButton_mc.addEventListener(MouseEvent.ROLL_OVER, colorizetravelButton);
function colorizetravelButton(givenEvent:MouseEvent){
if (givenEvent.currentTarget.currentFrame != 50)
travelButton_mc.gotoAndPlay(2);
travelButton_mc.addEventListener(MouseEvent.ROLL_OUT, decolorizetravelButton);
function decolorizetravelButton(givenEvent:MouseEvent){
if (givenEvent.currentTarget.currentFrame != 50)
travelButton_mc.gotoAndPlay(21);
travelButton_mc.addEventListener(MouseEvent.CLICK, loadtravelLocations);
function loadtravelLocations(givenEvent:MouseEvent){
travelButton_mc.gotoAndStop(50);
travelLocations_mc.gotoAndPlay(1);
Inside the travelLocations_mc I have currently one button to show a slide of pictures, this is the second layer of buttoncode:
stop();
scotlandButton_mc.buttonMode=true;
scotlandButton_mc.addEventListener(MouseEvent.ROLL_OVER, colorizescotlandButton);
function colorizescotlandButton(givenEvent:MouseEvent){
if (givenEvent.currentTarget.currentFrame != 50)
scotlandButton_mc.gotoAndPlay(2);
scotlandButton_mc.addEventListener(MouseEvent.ROLL_OUT, decolorizescotlandButton);
function decolorizescotlandButton(givenEvent:MouseEvent){
if (givenEvent.currentTarget.currentFrame != 50)
scotlandButton_mc.gotoAndPlay(21);
scotlandButton_mc.addEventListener(MouseEvent.CLICK, loadscotlandInfoPage);
function loadscotlandInfoPage(givenEvent:MouseEvent){
scotlandButton_mc.gotoAndStop(50);
scotlandInfoPage_mc.gotoAndPlay(1);
I turned the alpha up so you can see the mc that loads
I currently have a keyframe at 60 with a code of stop(); so the travelLocations_mc will still
does this make sense?

Firmware-upgrade failed router not accessible

during firmware-upgrade the connection to E4200 got lost due to power-outage, now the E4200 router is not accessible, power-led flashes ...
the factory-ip-address 192.168.1.1 responds on ping, but nothing else ...
how to get a working environment back?

Once reset the router. Steps to reset the router:
Push the reset button on router for 30 seconds, turn off the router wait for 30 seconds and then power it on. After this process reconfigure the router. Power light should blink when you perform the reset process.
Once the light gets stabilize on the router perform the following steps:
# Open up the browser and on the address bar type 192.168.1.1, it will prompt for the username and password. Provide the username as 'admin' and password as 'admin' or 'password'. Then it will open up the Router setup page.
# Then click on status and check the firmware version. If its not updated then upgrade the firmware once again.
# Then after firmware upgrade reset the router again as explained above.
Then uninstall the existing Cisco connect software from the computer. After uninstallation then configure the router again using Cisco Connect CD as you did earlier.

HD Not Accessible to Repair Permissions

Hello. I hope you can help me isolate the error that is keeping my Intel iMac G5 from booting properly. I’m running 10.4.
It froze after I’d been backing up onto DVD/dumping old data (about 20GB worth). Whenever I tried restarting the screen would freeze on the grey apple logo, sometimes with the swirly icon.
When I ran Disk Utility off the install disk at first it indicated “error detected” on mass storage, but later said it was fine. But I could not run Repair successfully (I kept getting "repair failed" messages), and the Repair Disk Permissions button was not accessible (greyed out).
I could not startup in safe mode. And if I tried to restart in DU the only option was a Network (which I'm not hooked up to).
Once I got a Kernal panic screen but most of the time it was just a grey apple with the fan hitting 900 rpm.
Finally I ran DiskWarrior and in 15 minutes it had cleaned out and rebuilt my HD. I thought I was home clear.
However, even though Disk Utility now says my HD is fine, it still does not allow me to Repair Disk Permissions - the option is greyed out. And if I boot up pressing Option to select a Startup Disk, the rebuilt drive is not one of them.
It appears my /Library/Receipts folder is empty.
What’s more, if I try to run an admin command in Terminal, like
sudo diskutil repairPermissions /
I get the message:
-bash: sudo: command not found
In fact, any way I try typing sudo I get a “command not found” message, even if I try to run other command like chmod.
When I type:
Users
I get
Users: command not found.
So I typed:
Echo $PATH
And get
/bin:/sbin:/usr/bn:/usr/sbin:/usr/libexec:/System/Library/CoreServices
I’m not sure at this point whether the fact that the DiskWarrior-rebuilt drive doesn’t show up among Startup options (when I boot with option key) is because of missing/broken permissions; an empty /Library/Receipts folder; missing users; or a missing path.
Any and all help is appreciated. Thank you.

Oy. I purchased an external drive and began installing Mac OSX onto it, so that I could then migrate all files from the unbootable hard drive before running an Archive & Install. That part seemed to go smoothly. But a few problems have emerged:
1. Though I was prompted to keep Disk 2 of the install ready, it never asked me for it, even though I ran the installation 2 or 3 times. Consequently while I can select the external drive when booting up command-S, I can only see Install window, Disk Utility or Terminal windows - never a desktop, preferences drop down, help menu, finder, all the things I'd typically see when launching my machine. Is this normal? Is there a way to force it to install only disk 2 if it has things it needs for full bootable GUI / access?
2. Booting up with the install disk, in disk utility I can see both drives but still cannot repair permissions on my affected HD. I tried via Terminal (repairPermissions, chmod or chown) commands; I keep getting error messages (command not found).
3. Switching cd / to my new drive in Terminal, I was able, I think, to change permissions (755) but when I open Disk Utility the drive is still not writable and "Repair Disk Permissions" is still grayed out.
4. I could not open Migration Assistant on the new drive via Disk Utility, so I copied it from the HD into its own folder on the new one, but am really confused about the whole Disk Image thing. If I create a new disk image and try to open it, convert or checksum it, it still is grayed out, I can never just open it. I tried running commands in Terminal to run that application on the external drive, pointing to the new folder, to the .app, to the contents, .dmg, and no commands seem to work, I keep getting the command not found message.
If I just run the A&I, I fear I'll lose my data which is why I wanted to migrate everything over before I did so. But if the user / owner permissions are screwed up and the only way to fix them is A&I, I don't know what else to do.
Is there ANY way to boot from the install, run Migration Assistant from the external drive (either through Disk Utility or Terminal) and copy all files from HD? If not, I guess I'll have to cross fingers and A&I.
Gee, I used to love my Mac ...

Bug? Menu Bar Not Accessible in Safari After Watching Full Screen Video

Hi everyone,
I have had this Not accessible menu bar problem time to time while using Safari, and I finally figured out what caused it. It always happens right after you go to a full screen video mode, and then get back out, and now when you move the mouse curser to the top, menu bar doesn't show. Then a way to fix is by using the 4 finger gesture to go back to the desktop screen, and come back to safari (not too fast) and menu bar is again accessible. Why is apple not fixing this bugs? I have seen more thread about menu bar gone, so it's not just me.

QuickTimeKirk wrote:
Hit the escape key to exit full screen.
That may be a "works as expected/designed," but once you've exited Full Screen View, then reenter Full Screen View and play a video in full screen mode, the window switches out of Full Screen to display the video in full screen video mode. It doesn't stay in Full Screen view, like it is the first time around.
EDIT:
Esc exits full screen video mode, but you still cannot access the slide-out menu bar with the button. Repeatedly pressing Esc does not exit Full Screen View, either. This only appears on the first invocation of Full Screen view and video mode. Once you exit Full Screen, the window behaves differently.
Note that we have determined this is only affected by HTML5 video. I have to do some more testing to figure out if it is ClickToPlugin that is causing the issue.
What's a good source for straight HTML5 video?

Shared Variable Deployment not accessible in Build Specification

Hi everyone,
I have a large project developed in LV 8.6.1 from which I executed numerous applications. I converted the project in LV 11 sp1f1, everything works well in code, everything is saved.
I wanted to build executable without cod change for LV 11 here is what I found:
Build the executable with Build Specifications inherited from LV 8.6 for which I checked on Use Labview 8.x file layout in Advanced. My application programmatically deploys all internal shared variables and when I wanted to access the Shared Variable Deployment in project in Build Specification then labview locked and I have to kill LV. Other time I did not access the Shared Variable Deployment and I start building executable when it looks the build progressing similar as in LV8.6 and last step before popping the attached error all the saved files in the build location were deleted.
I set up a build specification just for this LV 11. Again I wanted to access the Shared Variable Deployment and again labview is looping something from which I had to kill labview. I opened it again, I skipped the shared variable deployment line and I build the application. Because my application programmatically deploys shared variables I included in builder the lvlib where shared variables belong. The build files does not includes this time as output the file *.lvlib for which my inherited LV8.6 code programmatic deploys shared variables.
My question is should I change the code (very large code) taking out the programmatic variables deployment and to relay on the build executable to do deploy them then what should I do with Shared Variable Deployment line in Build Specification which for my large application is not accessible or is any way to still use the shared variable as in LV8.6 but for which I need *.lvlib in build location.
Another important issue: when I launched my application built as I showed in previous second case, first thing that I see is that my application is not able to save errors (I have a log file where I save different drivers or communication errors). Any idea why application even without shared variable deployed is not able to write a text file? I am administrator of my computer with all rights.
Thank you,
Virginia

No, I am not able to close Labview because of the windows error with only one button to close application. The application is correct executed. Next time when I start this project it is asking me if I want o recover even if I accept to recover it looks what I had last time it does not save.
For my application also I am building a VI without diagram built as source distribution for which I set in my builder this top vi and I excluded everything from the project because my application copies instances at the run time of this vi as many times as hardware modules I have in the system and also I have this vi included in my application (for the content of this vi). My vi contains interfaces for hardware configuration as well as drivers functions call for each hardware module I have to control in my application. Everything is good building this vi, but in less then one minute after the build is executed and build interface closes again I have the windows error which force me to close project. Next time when I open project I did not see the option to recover the project.
In the mean time I received second message and I wonder if you refer to files names or to folder names or all together. I checked and the maximum size is 122 characters in the vi paths.
Thank you,
Virginia

Enhancement in Module getting the message 'Statement is not accessible.'

Hi All,
I have a requirement in ME11/12/13 Info record. I have to put a check on 'Minimum order quantity' field and throw a message if it is blank. So i tried to create the Implicit enahncement in program SAPMM06I and screen number 102 inside MODULE CHECK_MANDATORY_FIELDS. After endmodule there is a place where we can do the implicit enahcement. i tried to create the same but will activating i am getting an error 'Statement is not accessible.'
Is it because i am writing the implicit enhancement in module pool??? please help me out because i have to display the message at eine-minbm field 'Minimum Quantity'.
thanks in advance
Rahul

I think a module should be placed in the enhancement and called elsewhere.
Rob

I have a Sony CDP-CX335. The door will not open and the turntable inside will not move

Can someone please help me trouble shoot this issue. I have disconnected the power and turned back on, I have held the eject button for a minute+ with the unit on and off. The door still will not open automatically and the turntable inside will not move. There are no dics inside. When turned on the light flashes inside.

Hi puffinparks,
Please check the link below for further assistance.
https://eservice.sony.com/webrma/web/index.do
Thanks.
>Joffrey
If my post answers your question, please mark it as "Accept as Solution"

Compile Error Statement is not accessible

Hi All,
I have report in SAP 4.7 . when i do syntax check on it it give a warning -"statement is not accessible."
But same thing when we compile we are getting as Syntax error in ECC 6.0 .
when I compile it, it prompts
Include ZHRIPENR
Statement is not accessible.
My REPORT program -
REPORT ZHRIBANK NO STANDARD PAGE HEADING
 LINE-SIZE 80
 LINE-COUNT 65.
START-OF-SELECTION.
INCLUDE ZHRIPENR.
END-OF-SELECTION.
My INCLUDE program -
*INCLUDE ZHRIPENR.
PERFORM BATCH_INIT.
FORM BATCH_INIT.
ENDFORM. " (BATCH_INIT)
when I compile it, it prompts
Include ZHRIPENR
Statement is not accessible.
Please let me know how can i proceed .
Cheers,
Reddy

Hi ..
The Reason may be bcoz you are Placing the FORM statements inside the Include.
Just Remove the FORMS from the Include and Place the in ur Main program in the Last.
Note: Subroutine definitions has to be in the end of the code.
REWARD IF HELPFUL.

Target a button inside of a Movie Clip

I am trying to target a button inside a dynamically loaded
movieclip, such as the following (but is not working):
clipAnswerYesNo: Movieclip
testbutton: embeded button
Script is on main timeline.
_root.clipAnswerYesNo.testbutton.onRelease = function() {
trace(userAnswer);
D

ensure both the movieClip and the button have instance names.
also, maybe change your trace to:
trace("hit button"+userAnswer);
it is possible that the trace and therefore the button is
working, it's just the path to userAnswer is incorrect...

Pdf not accessible cfpdfform

I am trying to write a Flex app to launch a PDF.
The Flex app is able to grab data from the database ok.... however when I click a button on the Flex app to invoke a CFC to invoke <cfpdffrom>... an error message indicates...
Unable to invoke CFC - the pdf file specified in the cfpdfform tag either does not exist or is not accessible by this tag.
When I change the path to the pdf, each subsequent error message shows the correct path to the pdf. Thus, the path seems to be ok.
I am able to launch the pdf ok via a .cfm
Help would be appreciated.
--Bill

Hello Tinnitus,
Please contact National instruments France directly. We'll see what we can do.
Regards,
Alexandre M. | Certified LabVIEW Developer
Embedded and Control Systems Engineer (NI France)

"Create Object " statement gives error: statement is not accessible

Hi All
U must b doing good.
I am new in ABAP Objects.
I have writeen a simple Class definition n Implimentasion code.
but whenever i write statement "Create object", it gives error.
'm working on SAP Dev 4.7.
the code was like this:-
class counter definition.
public section.
    METHODS: set IMPORTING VALUE(set_value) TYPE i,
             increment,
             get EXPORTING VALUE(get_value) TYPE i.
   private section.
   DATA count TYPE i.
ENDCLASS.
CLASS counter IMPLEMENTATION.
METHOD set.
    count = set_value.
ENDMETHOD.
METHOD increment.
    count = count + 1.
ENDMETHOD.
METHOD get.
    get_value = count.
ENDMETHOD.
ENDCLASS.
DATA: cnt_1 TYPE REF TO counter.
DATA number TYPE I VALUE 5.
CREATE OBJECT cnt_1 .
CALL METHOD cnt_1->set
EXPORTING set_value = number.
DO 3 TIMES.
   CALL METHOD cnt_1->increment.
ENDDO.
CALL METHOD cnt_1->get
IMPORTING get_value = number.
write: number.
its giving error like:-"Statement is not accessible."
plz tell me the way to resolve this error.
thanx n regards
Prashant tiwari

hi prashant....
this is the link to post your therads for abap objects:
[ABAP Objects;.
if you want to reward, on the left of every reply ther would be some radio buttons like answere, helpful answer,... so on. click the radio button which suits you. answered closes the thread and other points are displayed there itself.
---regards,
   alex b justin

Central System not accessible (SRM with CUA)

Hello Folks,
We are using Central user administration CUA and like other system SRM is connected to CUA. I am getting the error 'Central system not accessible' while creating the employee for business partner (Vendor) transaction BBPMAININT (Manage Business Partner).
Here are the steps
1. Login to SRM
2. Click on Manage business partner (BBPMAININT)
3. Look for Employee for Business Partner 'Create' option and create a
employee for one of the vendors.
4. Enter details and press save button
5. You will get the message Central 'System not accessible'
Any help in this regards is highly appreciated
Pradeep

Hi Joerg,
RFC user has SAP_ALL. Also we have also applied those notes. Could you please point to the excat cause of the issue. We can attache user to org structure using users_gen.
Thanks,
Pradeep

Buttons inside moveiclip not accessible

Similar Messages

Maybe you are looking for