C370 control between internal email domains
Hi All,
I have a customer where they have a few internal mail servers and the mail server’s email gateway are pointed to the C370 ironport.
They have a special requirement where they would like to block certain users from one mail server to be communicating with a set of people in another mail server.
They also have requirements like certain users can only send email to other certain users in another internal email domain.
Example:
a) [email protected] can only email [email protected]
b) [email protected] cannot sent emails to [email protected]
What I did is create mail policies for each requirement. For a) what I did is “allow from [email protected] to [email protected]”; then “deny [email protected] to any email domain”. As for b), what I did was “deny from [email protected] to [email protected]”; then “allow from [email protected] to any email domains”.
My question is:
1. Do I apply these policies on the incoming mail policies or outgoing? Taking into consideration I have a 2-data port topology where data-1 is configured to face the internet (public) and data-2 is facing the LAN (private)
2. Will my mail policy work?
Many thanks.
Hi Andreas,
Because I want to block [email protected] to send email to [email protected] only, I will have to define specific policies that drops [email protected] to [email protected], then allow [email protected] to every other email. Something like firewall rules performing specific deny and allow any any at the last line.
I performed some internal testings and I realize that in order to specifically block from [email protected] to [email protected], I have to define sender = [email protected] in the outgoing mail policy and [email protected] in the outgoing mail filter under filter = envelope recipient; action = drop (or vice versa). Otherwise, if I place sender = [email protected] and recipient = [email protected] in the mail policy, any email from [email protected] OR to [email protected] will hit the policy.
I feel that this is kind of brainless to do such thing and will add operational complexity. Unfortunately, my customer has a very strict security environment. I did say the same thing to him. "Why don't control on the server end?". He replied "what if my servers get compromised?"
Hope you can understand my explanation Thanks.
Similar Messages
-
Skip mail signature for internal emails (same domain as me)?
Is it possible to set up the signature in Apple Mail (3.5) to be attached to all email EXCEPT for those going to internal recipients -- those that use the same email domain as myself?
Sorry to break the bad news here..
Since they are in the same Exchange org, it would be impossible to send it through an external relay server before the other user gets it.
Transport rule does not have an option to send it through an external relay if any conditions match. In fact, transport rule cannot control any routing behavior except modify some recipients.
This will be possible only by creating another org for newdomain.com users and using a smart host to send between each other. -
Change email domain delivery priority
I have one email domain (DomainA) that I would like to have the highest priority for delivery, it's an internal domain so I can setup a specific smtproute with priority 0. The issue is we send a lot of email to a lot of domains (DomainB,DomainC, DomainD) and the queue can build up. But I want DomainA delivered as soon as the ironport received the email. I've tried to add DomainB,DomainC, DomainD to smtp routes with 'usedns' but it will not keep a higher priority setting that is larger than 0. So I'm not sure how I can make specific domains deliver quicker than the default domains. Any suggestion would be appreciated.
-ShawnHello Shawn,
there is a difference between the workqueue (messages in workqueue) and delivery queue (active recipients). SMTP Routes, Destination Controls etc. work on delivery indeed, however there is currently no prioritization you can set on the workqueue, do get messages from one sender processed faster than from others. You can address this in a slightly different way though, for instance by setting up limits on receiving for all hosts but the ones you want to prioritize, to prevent that the workqueue is building up. A common setting used for this is the "Rate Limit for Envelope Senders" in the mail flow policies. Activating this will limit the rate of messages injected per sender address, for a given time frame (default is 60 minutes, but can be changed). You could activate this setting in all mail flow policies, except the one for the senders you want to prioritize, or, use the "address list" for excluding senders from this policy.
Hope that helps,
Regards, Andreas -
Exchange 2010 Internal Email Delayed for 5 Months
Today I got an email from a user saying she just received an internal email that was sent November 5th 2013. I tried using Exchange Tracking Log Explorer but nothing shows as being received on 11/5/13 and nothing from todays date that matches the Subject.
Here are is the msg header which has been modified to hide our domain. This is a small business with 12 users with SBS 2011. This isn't the first time this has happened either. Another user had email delayed for 3 months.
Received: from work-SERVER2.work.local ([fe90::504b:b597:b89b:e7d9]) by
work-SERVER2.work.local ([fe90::504b:b597:b89b:e7d9%10]) with mapi id
14.01.0438.000; Tue, 5 Nov 2013 08:38:41 -0900
Content-Type: application/ms-tnef; name="winmail.dat"
Content-Transfer-Encoding: binary
From: USER NAME <[email protected]>
To: USERS <[email protected]>
Subject: FW: INVOICE FROM ABC
Thread-Topic: INVOICE FROM ABC
Thread-Index: Ac7Z2hVrwb+u2RXnRA+qtd9tX4v5DAAc7eQA
Date: Tue, 5 Nov 2013 08:38:40 -0900
Message-ID: <[email protected]>
References: <009f01ced9da$2f37ff60$8da7fe20$@com>
In-Reply-To: <009f01ced9da$2f37ff60$8da7fe20$@com>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach: yes
X-MS-Exchange-Organization-SCL: -1
X-MS-TNEF-Correlator: <[email protected]>
MIME-Version: 1.0
X-MS-Exchange-Organization-AuthSource: work-SERVER2.work.local
X-MS-Exchange-Organization-AuthAs: Internal
X-MS-Exchange-Organization-AuthMechanism: 04
X-Originating-IP: [192.168.99.99]Hi
First i really doubt that you would be able to see those transactions in message tracking logs since the default setting is 30 days.
By default the message tracking log is set to 30 days, you can change that setting though through the Shell:
http://technet.microsoft.com/en-us/library/aa997984.aspx
If this is the case then you can better increase the tracking logs retention for 3 months for the next delay can be recorded.
Also try to see if you could see some information on the protocol logs as well.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you. Regards, Sathish -
Internal emails are not delivered but they are shown in the Sent Mail
hi,
I'm not enjoying Exch2013, the lack of a "proper" admin console is a pain and I'm having trouble getting the required diagnostic/tracking information out of PShell to fix my problem.
I've installed Exch2013 RC1 on a new 2012r2 Domain, the install went OK and there were no obvious issues however internal email's wouldn't deliver, they appear in Sent Items but aren't received in the internal rcpt's inbox.
while trying to fix the problem, I installed ExchCU7 and bingo everything sprang to life and mail was working, inbound/outbound & internally - so I assumed the service pack/update had fixed it but the next day I rebooted the server and to my horror,
I'm back where I started - no mail flow.
One single test message which I sent outbound using the Web mail, rather than Outlook did arrive but hours after I sent it? confused.com
this is running on a HV-2012r2 as a VM, with a dedicated Nic and plenty of Fixed VD storage.
Any help/advice would be greatly appreciated.
I'm very close to removing Exch2013 and re-installing but I worry this would cause more issues.
Thanks Iainthis server is the first and only Exchange server in a single site/AD enviroment.
Doamin and Exch are both brand new, with one DC and Exch runing on a member server.
This server isn't recieving inbound mail yet, however the SMTP port is availible.
Am I correct in thinking that internal mail from one mailbox to another doesn't require SMTP, instead the msgs are transmitted within the HUB. I'd like to stress that the isntallation of ExchCU7 instantly fixed all the mail flow problems, then a day
later and after a reboot it reverted to back to its current state.
test-servicehealth shows:
Role : Mailbox Server Role
RequiredServicesRunning : True
ServicesRunning : {IISAdmin, MSExchangeADTopology, MSExchangeDelivery, MSExchangeIS,
MSExchangeMailboxAssistants, MSExchangeRepl, MSExchangeRPC, MSExchangeServiceHost,
MSExchangeSubmission, MSExchangeThrottling, MSExchangeTransportLogSearch, W3Svc, WinRM}
ServicesNotRunning : {}
Role : Client Access Server Role
RequiredServicesRunning : True
ServicesRunning : {IISAdmin, MSExchangeADTopology, MSExchangeMailboxReplication, MSExchangeRPC,
MSExchangeServiceHost, W3Svc, WinRM}
ServicesNotRunning : {}
Role : Unified Messaging Server Role
RequiredServicesRunning : True
ServicesRunning : {IISAdmin, MSExchangeADTopology, MSExchangeServiceHost, MSExchangeUM, W3Svc, WinRM}
ServicesNotRunning : {}
Role : Hub Transport Server Role
RequiredServicesRunning : True
ServicesRunning : {IISAdmin, MSExchangeADTopology, MSExchangeEdgeSync, MSExchangeServiceHost,
MSExchangeTransport, MSExchangeTransportLogSearch, W3Svc, WinRM}
ServicesNotRunning : {}
I'm looking at the q's now but wanted to post this asap... i will update this thread again shortly
thanks for your help. -
Exchange 2010 - Getting report on local internal email
Hi,
I am trying t get one particular stat out of my Exchange 2010 server using Powershell and could use some help. I simply want the total number of emails sent internally within my single exchange server.
Below is the Powershell command I have tried.
get-messagetrackinglog -ResultSize unlimited -Start “05/14/2013 00:00:00″ -End “06/10/2013 23:59:00″ | where {$_.Sender -like “*@domain.com“} | where {$_.Recipients -like “*@domain.com“} > “C:\internalmail.txt
The internalmail.txt file is empty. I have made a couple attempts to get this information from the messagetrackinglog, but haven't gotten any results. I was able to get the total number of RECEIVED and SENT emails from and to external addresses,
but nothing internal.
Does the messagetrackinglog keep a record of internal emails within the Exchange server?
Thanks for any help you can give.
TerryYour command should work, but there's no need for a double 'where{}' and using ">file.txt" makes a not so useful file:
get-messagetrackinglog -ResultSize unlimited -Start “06/10/2013 00:00:00" -End “06/10/2013 00:59:00" | where {$_.Sender -like “*@rotterdam.nl“ -AND $_.Recipients -like “*@rotterdam.nl“} > “C:\internalmail.txt"
Also, you did not specify a server, so you will have to run this command on a transportserver and it will only return results from that perticular server.
Try the following:
get-transportserver| get-messagetrackinglog -ResultSize unlimited -Start $(get-date).addhours(-1) -End $(get-date) | where {$_.Sender -like "*@org.nl" -AND $_.Recipients -like "*@org.nl"} | select EventId,Source,Sender,@{name="Recipient";expression={[system.String]::Join(";",$_.Recipients)}},MessageSubject| export-csv -noTypeInformation "C:\internalmail.txt"
you should be able to run it from any of you servers and it should get you the logs from all transport servers over the last hour. I've used $(get-date) here to see if it is an issue with your date format (it uses locale settings, an "issue" that
has been fixed in Exch 2010).
http://technet.microsoft.com/en-us/library/aa997573(v=exchg.80).aspx
End
Optional
System.DateTime
This parameter returns message tracking log entries up to, but not including, the specified End date and time byusing the regional format of the
computer on which the cmdlet is run.
(you can expect an error on edge server query ... ignore these) -
Internal email marked as Junk - Exchange 2013
Hello,
As per the title, I have an issue whereby internal email from a reporting server is being classed as Junk in Outlook 2010 and 2013 for all recipients.
-The Junk-email filtering level for all users in Outlook is set to "Low" and is applied via group policy.
-I have anti-spam agents installed on all Exchange mailbox servers, but the "InternalMailEnabled" parameter is set to "false" for all agents.
-The receive connector used to receive internal email has the "Externally secured" flag set, which allows spam-filtering to be bypassed.
-The "InternalSMTPServers" parameter of the transport config contains the IP of the sending server.
- The email address has been added to several users "Safe Senders" list in Outlook.
-I have a transport rule set up to bypass spam filtering for the sending address of the [email protected], yet the email header on any of these messages does not contain the "SCL -1" stamp as per the below:
#↓ Header Value
1 MIME-Version 1.0
2 From <[email protected]>
3 To <[email protected]>, <[email protected]>
4 Date Tue, 10 Mar 2015 07:35:32 +0000
5 Subject Report was executed at 10/03/2015 07:35:08
6 Content-Type multipart/mixed; boundary="--boundary_90_638c99de-c35d-4d06-b992-536e14201c6d"
7 Message-ID <[email protected]>
8 Return-Path [email protected]
9 X-MS-Exchange-Organization-AuthSource SERVER01.domain.localnet
10 X-MS-Exchange-Organization-AuthAs Internal
11 X-MS-Exchange-Organization-AuthMechanism 10
12 X-MS-Exchange-Organization-Network-Message-Id 8d357628-f2e9-48d5-77e2-08d2291beca4
13 X-MS-Exchange-Organization-AVStamp-Enterprise 1.0
Can anyone assist in explaining why these emails are being continually marked as Junk in Outlook, and any further troubleshooting steps.
Thanks
MattHello
please show transport rules settings.
sorry my english
Hello Sneff,
Transport Rule output below
Thanks
RunspaceId : 503d1c3b-4ab8-4e90-a5dd-a3eefdcbe404
Priority : 18
DlpPolicy :
DlpPolicyId : 00000000-0000-0000-0000-000000000000
Comments :
ManuallyModified : False
ActivationDate :
ExpiryDate :
Description : If the message:
Includes these patterns in the From address:
'[email protected]'
and Is received from 'Inside the organization'
Take the following actions:
Set the spam confidence level (SCL) to '-1'
RuleVersion : 15.0.0.0
Conditions : {FromAddressMatches, FromScope}
Exceptions :
Actions : {SetSCL}
State : Enabled
Mode : Enforce
RuleErrorAction : Ignore
SenderAddressLocation : HeaderOrEnvelope
RuleSubType : None
UseLegacyRegex : False
From :
FromMemberOf :
FromScope : InOrganization
SentTo :
SentToMemberOf :
SentToScope :
BetweenMemberOf1 :
BetweenMemberOf2 :
ManagerAddresses :
ManagerForEvaluatedUser :
SenderManagementRelationship :
ADComparisonAttribute :
ADComparisonOperator :
SenderADAttributeContainsWords :
SenderADAttributeMatchesPatterns :
RecipientADAttributeContainsWords :
RecipientADAttributeMatchesPatterns :
AnyOfToHeader :
AnyOfToHeaderMemberOf :
AnyOfCcHeader :
AnyOfCcHeaderMemberOf :
AnyOfToCcHeader :
AnyOfToCcHeaderMemberOf :
HasClassification :
HasNoClassification : False
SubjectContainsWords :
SubjectOrBodyContainsWords :
HeaderContainsMessageHeader :
HeaderContainsWords :
FromAddressContainsWords :
SenderDomainIs :
RecipientDomainIs :
SubjectMatchesPatterns :
SubjectOrBodyMatchesPatterns :
HeaderMatchesMessageHeader :
HeaderMatchesPatterns :
FromAddressMatchesPatterns : {[email protected]}
AttachmentNameMatchesPatterns :
AttachmentExtensionMatchesWords :
AttachmentPropertyContainsWords :
ContentCharacterSetContainsWords :
HasSenderOverride : False
MessageContainsDataClassifications :
SenderIpRanges :
SCLOver :
AttachmentSizeOver :
MessageSizeOver :
WithImportance :
MessageTypeMatches :
RecipientAddressContainsWords :
RecipientAddressMatchesPatterns :
SenderInRecipientList :
RecipientInSenderList :
AttachmentContainsWords :
AttachmentMatchesPatterns :
AttachmentIsUnsupported : False
AttachmentProcessingLimitExceeded : False
AttachmentHasExecutableContent : False
AttachmentIsPasswordProtected : False
AnyOfRecipientAddressContainsWords :
AnyOfRecipientAddressMatchesPatterns :
ExceptIfFrom :
ExceptIfFromMemberOf :
ExceptIfFromScope :
ExceptIfSentTo :
ExceptIfSentToMemberOf :
ExceptIfSentToScope :
ExceptIfBetweenMemberOf1 :
ExceptIfBetweenMemberOf2 :
ExceptIfManagerAddresses :
ExceptIfManagerForEvaluatedUser :
ExceptIfSenderManagementRelationship :
ExceptIfADComparisonAttribute :
ExceptIfADComparisonOperator :
ExceptIfSenderADAttributeContainsWords :
ExceptIfSenderADAttributeMatchesPatterns :
ExceptIfRecipientADAttributeContainsWords :
ExceptIfRecipientADAttributeMatchesPatterns :
ExceptIfAnyOfToHeader :
ExceptIfAnyOfToHeaderMemberOf :
ExceptIfAnyOfCcHeader :
ExceptIfAnyOfCcHeaderMemberOf :
ExceptIfAnyOfToCcHeader :
ExceptIfAnyOfToCcHeaderMemberOf :
ExceptIfHasClassification :
ExceptIfHasNoClassification : False
ExceptIfSubjectContainsWords :
ExceptIfSubjectOrBodyContainsWords :
ExceptIfHeaderContainsMessageHeader :
ExceptIfHeaderContainsWords :
ExceptIfFromAddressContainsWords :
ExceptIfSenderDomainIs :
ExceptIfRecipientDomainIs :
ExceptIfSubjectMatchesPatterns :
ExceptIfSubjectOrBodyMatchesPatterns :
ExceptIfHeaderMatchesMessageHeader :
ExceptIfHeaderMatchesPatterns :
ExceptIfFromAddressMatchesPatterns :
ExceptIfAttachmentNameMatchesPatterns :
ExceptIfAttachmentExtensionMatchesWords :
ExceptIfAttachmentPropertyContainsWords :
ExceptIfContentCharacterSetContainsWords :
ExceptIfSCLOver :
ExceptIfAttachmentSizeOver :
ExceptIfMessageSizeOver :
ExceptIfWithImportance :
ExceptIfMessageTypeMatches :
ExceptIfRecipientAddressContainsWords :
ExceptIfRecipientAddressMatchesPatterns :
ExceptIfSenderInRecipientList :
ExceptIfRecipientInSenderList :
ExceptIfAttachmentContainsWords :
ExceptIfAttachmentMatchesPatterns :
ExceptIfAttachmentIsUnsupported : False
ExceptIfAttachmentProcessingLimitExceeded : False
ExceptIfAttachmentHasExecutableContent : False
ExceptIfAttachmentIsPasswordProtected : False
ExceptIfAnyOfRecipientAddressContainsWords :
ExceptIfAnyOfRecipientAddressMatchesPatterns :
ExceptIfHasSenderOverride : False
ExceptIfMessageContainsDataClassifications :
ExceptIfSenderIpRanges :
PrependSubject :
SetAuditSeverity :
ApplyClassification :
ApplyHtmlDisclaimerLocation :
ApplyHtmlDisclaimerText :
ApplyHtmlDisclaimerFallbackAction :
ApplyRightsProtectionTemplate :
SetSCL : -1
SetHeaderName :
SetHeaderValue :
RemoveHeader :
AddToRecipients :
CopyTo :
BlindCopyTo :
AddManagerAsRecipientType :
ModerateMessageByUser :
ModerateMessageByManager : False
RedirectMessageTo :
RejectMessageEnhancedStatusCode :
RejectMessageReasonText :
DeleteMessage : False
Disconnect : False
Quarantine : False
SmtpRejectMessageRejectText :
SmtpRejectMessageRejectStatusCode :
LogEventText :
StopRuleProcessing : False
SenderNotificationType :
GenerateIncidentReport :
IncidentReportOriginalMail :
IncidentReportContent :
RouteMessageOutboundConnector :
RouteMessageOutboundRequireTls : False
ApplyOME : False
RemoveOME : False
GenerateNotification :
Identity : SQLReportingServices
DistinguishedName : CN=SQLReportingServices,CN=TransportVersioned,CN=Rules,CN=Transport
Settings,CN=Domain,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domain,DC=localnet
Guid : 11f1083e-9e12-45d1-8e8f-3b878d4ca183
ImmutableId : 11f1083e-9e12-45d1-8e8f-3b878d4ca183
OrganizationId :
Name : SQLReportingServices
IsValid : True
WhenChanged : 10/03/2015 13:23:11
ExchangeVersion : 0.1 (8.0.535.0)
ObjectState : Unchanged
Matt -
Internal emails not being received.
Hi,
We have come across an issue in our office with our blackberrys. If we send emails from our Blackberrys to another internal email address it arrives on our computers in our outlook but not on the blackberry. It doesn't fail or not sent it goes as if its sent but never arrives on the Blackberry.
If we send from our Computers to the address it arrives on both the Computer and the Blackberry.
Our carrier is vodafone ireland... and we have also spoken to our hosting company..
Can anyone help with this... it is as if Blackberry have blocked our company emails!Yes, that helps ... and this only occurs when you send email FROM your BlackBerrys to other internal (meaning on your same company or corporate email domain name) email addresses.
First, check your internal email server's spam folders for those addresses and make sure the mail is not being filtered as spam.
Then, here are a couple of guides and suggestions
KB11036Firewall and connection requirements for the BlackBerry Internet Service
KB12447Error when sending email messages in same domain: authentication error: 530 5.1.0 unknown address
KB21775How to allow enterprise activation traffic for a BlackBerry Enterprise Server to make it through a spam filter
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Difference between Internal order & Profit centers
Hello guru's
Can you please explain in detail the diffenece between Internal orders and profit centers. As i know that, profit centers are used to find out the profit of the particular cost object or task in controlling. can we use the internal order costing for the same purpose or only for the cost accumulation?
Thanks in advance!!
Rgds,
Yatheendra NathHi Yatheendra,
Profit Centre refers to the area of responsibility with in an organisation(in lay man's language you may consider it as company with in a company).Profit centre hierarchy reflects the internal structure of areas of responsibility within your company.
The main purpose of profit centre is to provide reports to management as per these responsibilty centres.It serves to calculate internal (plan and actual) results according to the period accounting approach. If the function area is specified for the data in the controlling components, you can also analyze results using the cost‑of‑sales approach.You can access the original postings from FI, CO, SD, MM, and so on directly to identify potential weaknesses.
Internal orders-An internal order is used to monitor parts of the costs, and under certain circumstances, the revenues of the organization.You can create an internal order to monitor the costs of a time-restricted job or the costs (and revenues, if required) for the production of activities. Internal orders can also be used for the long-term monitoring of costs.The SAP system enables you to monitor your internal orders throughout their entire life-cycle; from initial creation, through the planning and posting of all the actual costs, to the final settlement.
<u>Please award points if I had been of some help to you.
Rgds
Manish -
Internet Email Domain Name Change
Mangagement wants our email domain name changed because of it's length. Another government agency handles hosting for us now and can't change it for us. I have paid for a new name using a company on the internet and now have to switch it over. I see, in console one, that I can create a second name in Tools -> Groupwise System Operations -> Internet addressing and then set one of them to preffered. Can I do this and then set the new name as preferred? I would like to allow email that is addressed to the old email domain name to flow to the users for 30 days. Looks like I will need to change the foriegn ID in the gwia and also the name in the internal groupwise domain properties. Is there anything else that needs to be done? Is this the best way to do this? Thanks
On 7/30/2012 3:36 PM, dgonnse wrote:
>
> Mangagement wants our email domain name changed because of it's length.
> Another government agency handles hosting for us now and can't change
> it for us. I have paid for a new name using a company on the internet
> and now have to switch it over. I see, in console one, that I can
> create a second name in Tools -> Groupwise System Operations -> Internet
> addressing and then set one of them to preffered. Can I do this and
> then set the new name as preferred? I would like to allow email that is
> addressed to the old email domain name to flow to the users for 30 days.
> Looks like I will need to change the foriegn ID in the gwia and also
> the name in the internal groupwise domain properties. Is there anything
> else that needs to be done? Is this the best way to do this? Thanks
>
>
assuming there's no po/user/domain overrides of IA settings, that should
work ok. -
Teaming - Changing Email Domain
With Teaming 2.0, can I change the domain name that is automatically appended to Email URLs created for workspaces. folders etc.
The default appears to be the domain part the server hostname. I need to change that so that users external to our organisation can email postings into Teaming as our email domain is different to that of the server.
Folder URLs still need to have the server domain appended to them.
Any ideas?Originally Posted by computatech
With Teaming 2.0, can I change the domain name that is automatically appended to Email URLs created for workspaces. folders etc.
The default appears to be the domain part the server hostname. I need to change that so that users external to our organisation can email postings into Teaming as our email domain is different to that of the server.
Folder URLs still need to have the server domain appended to them.
Any ideas?
Hi Guys,
Apologies for late reply.
Were using GroupWise! - what's Exchange? The problem is down the list of priorities at the moment - our collaboration site is using a second Teaming zone, with a virtual host domain that can be accessed by both our internal and external users using the same URL. That means the Teaming permalinks work for all and the Teaming SMTP server can process email.
Regards
Dave -
I have a person here in the office that is having issues with internal emails. She will get emails sent by someone in our office (same domain, same email domain) 1 to 2 days late. It doesn't appear to be specific from one sender but random. She is the only
one out of about 100 people who are having this issue. I was able to send her an email and she got it right away so replicating the results is difficult, however she is getting 2 or more emails a day that are a day or so late. Does anyone have any ideas? Our
setup is 2 exchange mailbox data base servers, two CAS servers and we are running Exchange 2010. The user with the problems is running Windows 7 with Outlook 2010.
ThanksHi,
I recommend you use message tracking to check if the message was delivered to the recipient with any delay.
In addition, let the user disable the virus software on the client PC, and try to use outlook safe mode and online mode. Check if the issue still occur.
Thanks.
Niko Cheng
TechNet Community Support -
Hi,
SharePoint 2010 Backup has been taken from production and restored through Semantic Tool in one of the server.The wepapplication of which the backup was taken is working fine.
But the problem is that the SharePoint is not working correctly.We cannot create any new webapplication ,cannot navigate to the ServiceApplications.aspx page it shows error.Even the Search and UserProfile Services of the existing Web Application is not working.Checking
the SharePoint Logs I found out the below exception
11/30/2011 12:14:53.78 WebAnalyticsService.exe (0x06D4) 0x2D24 SharePoint Foundation Database
8u1d High Flushing connection pool 'Data Source=urasvr139;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Connect Timeout=15'
11/30/2011 12:14:53.78 WebAnalyticsService.exe (0x06D4) 0x2D24 SharePoint Foundation Topology
2myf Medium Enabling the configuration filesystem and memory caches.
11/30/2011 12:14:53.79 WebAnalyticsService.exe (0x06D4) 0x12AC SharePoint Foundation Database
8u1d High Flushing connection pool 'Data Source=urasvr139;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Connect Timeout=15'
11/30/2011 12:14:53.79 WebAnalyticsService.exe (0x06D4) 0x12AC SharePoint Foundation Topology
2myf Medium Enabling the configuration filesystem and memory caches.
11/30/2011 12:14:55.54 mssearch.exe (0x0864) 0x2B24 SharePoint Server Search Propagation Manager
fo2s Medium [3b3-c-0 An] aborting all propagation tasks and propagation-owned transactions after waiting 300 seconds (0 indexes) [indexpropagator.cxx:1607] d:\office\source\search\native\ytrip\tripoli\propagation\indexpropagator.cxx
11/30/2011 12:14:55.99 OWSTIMER.EXE (0x1DF4) 0x1994 SharePoint Foundation Topology
75dz High The SPPersistedObject with
Name User Profile Service Application, Id 9577a6aa-33ec-498e-b198-56651b53bf27, Parent 13e1ef7d-40c2-4bcb-906c-a080866ca9bd failed to initialize with the following error: System.SystemException: The trust relationship between the primary domain and the trusted
domain failed. at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection sourceSids, Boolean& someFailed) at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection
sourceSids, Type targetType, Boolean forceSuccess) at System.Security.Principal.SecurityIdentifier.Translate(Type targetType) at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()
at Microsoft.SharePoint.Administration.SPAcl`1.Add(String princip...
11/30/2011 12:14:55.99* OWSTIMER.EXE (0x1DF4) 0x1994 SharePoint Foundation Topology
75dz High ...alName, String displayName, Byte[] securityIdentifier, T grantRightsMask, T denyRightsMask) at Microsoft.SharePoint.Administration.SPAcl`1..ctor(String persistedAcl)
at Microsoft.SharePoint.Administration.SPServiceApplication.OnDeserialization() at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.OnDeserialization() at Microsoft.SharePoint.Administration.SPPersistedObject.Initialize(ISPPersistedStoreProvider
persistedStoreProvider, Guid id, Guid parentId, String name, SPObjectStatus status, Int64 version, XmlDocument state)
11/30/2011 12:14:56.00 OWSTIMER.EXE (0x1DF4) 0x1994 SharePoint Foundation Topology
8xqx High Exception in RefreshCache. Exception message :The trust relationship between the primary domain and the trusted domain failed.
11/30/2011 12:14:56.00 OWSTIMER.EXE (0x1DF4) 0x1994 SharePoint Foundation Timer
2n2p Monitorable The following error occured while trying to initialize the timer: System.SystemException: The trust relationship between the primary domain and the trusted domain failed. at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection
sourceSids, Boolean& someFailed) at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection sourceSids, Type targetType, Boolean forceSuccess) at System.Security.Principal.SecurityIdentifier.Translate(Type
targetType) at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName() at Microsoft.SharePoint.Administration.SPAcl`1.Add(String principalName, String displayName, Byte[] securityIdentifier, T grantRightsMask,
T denyRightsMask) at Microsoft.SharePoint.Administrati...
11/30/2011 12:14:56.00* OWSTIMER.EXE (0x1DF4) 0x1994 SharePoint Foundation Timer
2n2p Monitorable ...on.SPAcl`1..ctor(String persistedAcl) at Microsoft.SharePoint.Administration.SPServiceApplication.OnDeserialization() at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.OnDeserialization()
at Microsoft.SharePoint.Administration.SPPersistedObject.Initialize(ISPPersistedStoreProvider persistedStoreProvider, Guid id, Guid parentId, String name, SPObjectStatus status, Int64 version, XmlDocument state) at Microsoft.SharePoint.Administration.SPConfigurationDatabase.GetObject(Guid
id, Guid parentId, Guid type, String name, SPObjectStatus status, Byte[] versionBuffer, String xml) at Microsoft.SharePoint.Administration.SPConfigurationDatabase.GetObject(SqlDataReader dr) at Microsoft.SharePoint.Administration.SPConfigurationDatabase.RefreshCache(Int64
currentVe...
Please guide me on the above issue ,this will be of great help
Thanks.I have same error. Verified for trust , ports , cleaned up cache.. nothing has helped.
The problem is caused by User profile Synch Service:
UserProfileProperty_WCFLogging :: ProfilePropertyService.GetProfileProperties Exception: System.SystemException:
The trust relationship between the primary domain and the trusted domain failed. at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection sourceSids,
Boolean& someFailed) at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection sourceSids, Type targetType, Boolean forceSuccess) at System.Security.Principal.SecurityIdentifier.Translate(Type
targetType) at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName() at Microsoft.SharePoint.Administration.SPAcl`1.Add(String principalName, String displayName, SPIdentifierType identifierType, Byte[]
identifier, T grantRightsMask, T denyRigh...
08/23/2014 13:00:20.96* w3wp.exe (0x2204)
0x293C SharePoint Portal Server User Profiles
eh0u Unexpected ...tsMask) at Microsoft.SharePoint.Administration.SPAcl`1..ctor(String persistedAcl)
at Microsoft.Office.Server.Administration.UserProfileApplication.get_SerializedAdministratorAcl() at Microsoft.Office.Server.Administration.UserProfileApplication.GetProperties() at Microsoft.Office.Server.UserProfiles.ProfilePropertyService.GetProfileProperties()
Please let me know if you any solution found for this?
Regards,
Kunal -
Copy Control between Sales Orders and Deliveries
Hi Gurus,
please can you tell me why copy control between Sales Order and Delivery doesn't work?
At header level, into copy control, we can set 2 requirement routines, one as general requirement for copying (TVCPL-AUBED) and the other one as requirement for grouping orders into deliveries (TVCPL-AUZUS).
At header level we can also set a routine for data transfer to define how data are passed from Sales Order header to Delivery header (TVCPL-GRUAK).
Then we can set routines at item level, one as requirement (TVCPL-AUBED) and one as data transfer (TVCPL-GRUAP).
When delivery is created with VL10A transaction, at header level only the first general requirement routine is used (FV50B***). Grouping requirement is not used (we also set a break point and the program is not passing into this routine).
Then it is used the requirement routine at item level (FV50B***).
Please can you tel me how we camake working the routine for grouping requirement at header level?
Thank you very much.
Kind Regards
AndreaHi, we used standard routine even if to be sure we run also the generation report you mentioned.
Please any other suggestions?
Thank you very much.
Kind Regards
Andrea -
I created a new apple id because the previous one no longer exists as an email (domain had to be cancelled). I keep seeing the old one pop up in my iPhone for which I don't remember the password. How can I get rid of it??? Or how can I reset the password if the email doesn't exist??? I also tried answering a question (my date of birth) but it says it's wrong.
I'm really frustrated with the apple id!!!
Frustrated!!!In one of the help pages for managing your Apple ID (http://support.apple.com/kb/HE40), it shows two separate sections, one for Apple ID and one for Primary Email address. When I go to manage my Apple ID, I see only a single section for both. Can the two be 'separated', especially when you face the situation of having to discontinue your email address for some reason?
I also noticed that when navigating to Apple ID Support Communities, it shows my nickname 'dishdy'. How and when did I insert this? In the current sequence for creating an Apple ID I don't see this. In my current profile I don't see this.
In any case, I have freed myself from my previous Apple ID (@artemis.it) on my iPhone.
Thanks for your help.
Maybe you are looking for
-
Jabber 9.6 no voicemail tab for CUC with CUCM 9 and CUC 8.6
Hi guys, I have Jabber 9.2 and 9.6 clients with CUCM 9.1.2, CUC 8.5.1 and Cisco IM + P 9.1.1. We've recently updated the CUCM and CUPS to Cisco IM+P. Also we have migrated from CUPC Clients to Jabber clients. The CUC server has remained as is. I w
-
Why Doesn't my midi player work
// MusicBox.java // sachs // Created by David Kopec on Mon Jul 14 2003. // Copyright (c) 2003 __MyCompanyName__. All rights reserved. import javax.sound.midi.*; import java.net.*; import java.io.*; import java.util.*; public class MusicBox implem
-
How can i install airport express A 1264 on os x 10.9.2
How can i install Airport Express A 1264 on os x 10.9.2
-
Macbook pro sound defaults to right speaker only
How do I set the sound output to not change to the right speaker only by default? It resets itself every so often.
-
Error when doing blind transfer from CAD
We have put a button on our CAD desktop with an action to perform a blind transfer to a specific extension (which happens to be a routepoint). 20% of the transfers fail with this error message: "The agent- or workflow-initiated action request failed.