C4480 - #74 cartridge ran dry in a week with almost no use?

After a few months of printing, my blank ink ran out, so I bought a 74/75 combo kit and replaced the black cartridge. I followed the directions, it ran through it's setup, and I was good to go.
Within a couple days, I started getting the low ink warning on black after printing a few documents. Sure enough, the black ran dry tonight. I'd estimate I only printed about 10-15 pages on this cartridge.
Has anyone else had this problem? Now I have to go buy another expensive cartridge, hopefully not to experience this problem again. I have no receipt for Staples where I bought it - can I send it back to HP for a replacement? 

No I have slow as crap AT&T.  I think they only pay for the 1.5 speed.   This is why I don't use my internet streaming but now that I am getting a nice computer I am getting nice/fast internet.    I live with my parents and I think I am the only one that has his own internet & satalite. It's funny there are gonna be 2 different services for both.  They still refuse to get HD on dish even when I offered to pay for so I got DirectTV.  Between internet and Satalite I will kind of know my bills will cost when I get my house hopefull about Feb/March 2014 so I can buy a house within my budget. 
I  Just figure if you are gonna spend the money on a nice computer what is the point if you can fully use it.  Plus I never really used the internet much other than surfing.  Plus if you never had it you don't know what you are missing.  So I was always content.  Plus I never have has a computer that was really great just kind of middle of the road/good  just to get the job done.  Search the web and play some games offline.  Not streaming or download music.  I never really do that stuff anyway.  Except maybe stream now that it will be fast.  I pay for netflix and amazon streaming and it works but I know it could be better.
By the way you may find this funny I almost got suckered into clear.   Thank god I woke up.

Similar Messages

  • How can I get the 23 July update to load onto my iPad. I haven't been able to access my documents or work for weeks and need to use it. Has anyone else had similar problems?

    How can I get the 23 July update to load onto my iPad. I haven't been able to access my documents or work for weeks and need to use it. Has anyone else had similar problems?

    Hello Arthur,
    Thank you for the reply.
    You were correct that deleting the app and reinstalling it was the only thing to make it work but unfortunately I lost all the documents I made, even though they were backed up to iCloud before i deleted the app. At the same time as deleting pages I had to delete keynote and numbers too, so I've lost all the documents in them too.
    The mb of data which was assigned to each programme in iCloud has reduced, so. I guess they are gone for good. Is there any other way to reaccess them?
    Not your fault but I am a bit fed up the the iPad. I have lost work that I've done and have no other copy apart from what was in iCloud, as I don't have a printer and couldn't email them too myself as I couldn't get into the programme and  i've also got episodes of tv series I purchased that I can't download and albums that are half downloaded with songs missing, so I feel a bit swindled out of time and money and am going back to DVD ,  pen and paper and CDs .
    Instead of using iCloud I guess the only way to make sure I don't loose any more documents it to email them to myself each time I save them on the iPad. Is there anything else you could suggest please?
    I don't have any other apple products apart from iPods, so I can't access the iCloud on anything else can I?
    Thanks
    Amanda

  • How can you expect the customer to have a LOCAL/COUNTRY Based Credit Card every where we go??? Last week I was on holiday in HK,  and  from my Hotel I was able to use m VN Credit Card with my Apple ID and purchase online!  Why THIS WEEK, can't I use my HS

    Apple_ID_card_declined_for_this_country
    How can you expect the customer to have a LOCAL/COUNTRY Based Credit Card every where we go???
    Last week I was on holiday in HK,
    and
    from my Hotel I was able to use m VN Credit Card with my Apple ID and purchase online!
    Why THIS WEEK, can't I use my HSBC Platinum Credit Card from Vietnam,
    for my Singapore Apple ID account ,
    while working here in Vietnam???

    Unfortunately, this is a problem that is driven by the DRM Dictatorship.  Despite the proliferation of mobile devices and the fact that there are many of us who do a lot of international travel, content providers don't want you to have access to their products outside of your homeland.  The Balkanized mentality of the DRM Dictatorship is way out of touch with the modern world.
    At least Apple, to its credit, allows you to use your accounts outside of your homeland as long as you have the proper credentials for them.  Most other services use the more Draconian geolocation filtering which does require you to be physically present in your homeland.  For the most part, you are not allowed to leave home if you want access to your favorite entertainment!

  • I hope someone gets this who can help me. i don't find anything helpful in the help section of icloud. i'm using my 4th generation itouch for about 3 weeks with the ical. but today when i tried to edit an event or d an event a window would pop up and sa

    i hope someone gets this who can help me. i don't find anything helpful in the help section of icloud. i'm using my 4th generation itouch for about 3 weeks with the ical. but today when i tried to edit an event or add an event a window would pop up and say "event can't be saved" or "no calendar chosen" or something like "this event doesn't belong with this calendar" and stuff like that.
    can you please help me fix this?

    You could repartition your drive to have a different OS X with the older iTunes there, and the newer iTunes on the existing partition. Back up everything beforehand. See Kappy's advice in this thread. Partitioning my Hard Drive

  • How can I see the whole week with calendar built-in app ?

    How can I see the whole week with calendar built-in app ? My husband has an ipad and he can see the whole week and the whole year... is it possible with iphone 4 ?

    What you see is what is available.
    Turning the iPhone into landscape mode with Month, Day, or List view selected provides the closest thing to seeing an entire week.

  • HT201272 How can I see the whole week with calendar built-in app ?

    How can I see the whole week with calendar built-in app ?  My husband has an ipad and he can see the whole week and the whole year... is it possible with iphone 4 ?

    You have posted in the itunes store forum.  This has nothing to do with the itunes store.

  • I bought a MacBook Pro 13" last week with Snow Leopard pre-installed. Now I am looking to upgrade to Lion. Is there a 30 day window to do that for free? I cannot review my App Store id since I do not have a Credit Card. What to do?

    I bought a MacBook Pro 13" last week with Snow Leopard pre-installed. Now I am looking to upgrade to Lion. Is there a 30 day window to do that for free? I cannot review my App Store id since I do not have a Credit Card. What to do in this case to install Lion. Please help. 

    Hi,
    Use this Info to Contact Apple Support in your Country
    http://www.apple.com/in/support/
    (91) 1800 4250 744 or (91) 80-4140-9000

  • I am unable to connect to my home wifi, i was fine in a hotel this past week with the wifi

    Question I am unable to connect to my home wifi, I was fine in a hotel this past week with their wifi, I am not that technical and need help also how do I find my operating system info??

    Go to settings, general, about, and you will see "version." That will indicate what your operating system is such as 5.0.1 which is the most recent upgrade.
    As for the wifi, you might try going to settings, then general, then at the bottom reset, then click on reset network settings. Back out of everything and then when you log back onto your wifi it will ask you for your local password (assuming you gave it one when your router was set up). Enter it and you should be good for go.  At least this worked for me.
    Good luck.

  • Hi, I have big problems since 2 weeks with outline, fonts, size in Ai CS6 : Numerical value are so big

    Hi, I have big problems since 2 weeks with outline, fonts, size in Ai CS6 : Numerical value are so big and I can't change it with smaller. Apparently Ai said me that comes from AiPrefs... Could you help me please.
    I tried to initialize my preferences but nothing change.
    PS : Sorry for my English, I'm French
    Pierre

    Pierre,
    You may try the list and see how far down you need to go; you have probably been through 1) and 2), and 4) is both reversible and more thorough than 3); 5) is hardly relevant, so you may end up with 6).
    The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
    If possible/applicable, you should save current artwork first, of course.
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to at least 5 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
    Even more seriously, you may:
    6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • I 've had the newest iPad for about one week. Just started using face time..why does face time camera take pixelated pictures? The iSight  camera pictures look fine.

    I 've had the newest iPad for about one week. Just started using face time..why does face time camera take pixelated pictures? The iSight  camera pictures look fine.

    Kathleenfromks wrote: ...why does face time camera take pixelated pictures? ...
    Because something is wrong.
    You will need to troubleshoot to find out what needs to be fixed.
    One of these suggestions may resolve your trouble. 
    FaceTime (and other video) quality problems can be caused by problems at either end of the connection.  Unless your video callers' FaceTime connections work properly with everyone else but you, both parities to the video call should consider these possibilities.
    (1) Restart your iPad and test again. Sometimes a simple restart fixes things. 
    (2) Use a fast broadband internet connection for best possible FaceTime video.
    Broadband speed matters at BOTH ends, so you use something like http://speedtest.net/ to test both ends of your video connections.
    Speeds less than 300 Kbps (up and down) at both ends are unlikely to give best results.
    (3) Try from a different wi-fi connection.
    If the problem is ONLY at your current location, restarting your internet connection may help.  Shut down your iPad or turn Airplane Mode "on".  Then check your cable connections, restart your modem and wireless access point, reconnect iPad to the wi-fi, and test again.
    If the problem remains but ONLY at your current location, there may be a problem with your internet service.  Contact your ISP for help.
    (4) Always use as much light as possible for best images (including video) from your iPad. 
    Message was edited by: EZ Jim
    iPad2 iOS 5.1    

  • First week with Rezound

    After reading all the issues that have been posted, I thougt I would add a positive view.  After one week with my new Rezound and getting rid of stock GMail app with Google Gmail app, this phone has been super.  Great screen, above average signal, no bootloops, no crashes, email/ontacts/calendar sync with Google, mx Video and google music are great for my uses, GPS/nav/weather work great, dock mode works super (buy the dock from Amazone, phone will fit with case on it), internet is super, no 3G/4G problems.
    Do not know if I am just lucky or what, but a great phone and play toy.
    So if you want a good phone get this one!!!

    The docking station I found on Amazon was RND Power Solutions Deluxe 2nd Battery Charger and Data
    Sync Cradle / Desktop Dock Station for HTC Rezound.  Here is a link http://www.amazon.com/gp/product/B006IKLPSC/ref=oh_o03_s00_i00_details

  • How to determine minutes per week with inconsistent start and end times...

    ver -> 10.2.0.4
    I'm looking for some guidance or some pseudo code in how to attack the following:
    Data
    target_nm  status       start_timestmap       end_timestamp
    DEVDB      Target Up    8/28/2009 9:49:08 AM  9/26/2009 6:34:23 PM
    DEVDB      Target Down  9/26/2009 6:34:23 PM  9/26/2009 6:36:23 PM
    DEVDB      Target Up    9/26/2009 6:36:23 PM How can I display, per week, the number of minutes a status was held? There are 10,080 minutes per week and I'm using to_char(to_date('8/28/2009 9:49:08 AM', 'mm/dd/yyyy hh:mi:ss AM'), 'WW') to determine the week number. The end result would be something like, in example:
    target_nm   wk    up           down
    DEVDB       35    [x minutes]  [y minutes]This, at first, seemed pretty straight forward, but where it gets wrapped around the axle is that the records of a status can span a number of weeks between the 'start_timestamp' and the 'end_timestamp.'
    My current approach is to isolate this down for a given day...if something is "started" then determine the number of minutes between trunc(start) +1 and start . If it has "ended" then determine the number of minutes between trunc(ended) and end.
    Resulting in something like:
    target_nm    status     day_of_year  minutes_of_status start_timestamp       end_timestamp
    DEVDB        Target Up  8/27/2009    296.3333          8/27/2009 7:03:40 PM  nullAny advice, a different perspective, or pseudo code would be greatly appreciated on how to turn the corner on showing these status's as they break down per week.
    Regards,
    -abe

    Hi,
    As you said, you just need to compute SUM (end_timestamp - start_timestamp), GROUPing BY week.
    The tricky part is what happens when an event is not entirely within one week. For example:
    DEVDB      Target Up    1/07/2009 11:00:00 AM  1/08/2009 2:00:00 PMThis event lasted 3 hours, but you want to count this as 1 hour in week '01', and 2 hours in week '02', not as 3 hours in either week.
    The solution is very much like the one in the following thread:
    [8i] Date/Time calculation problem...
    Whenever you have a problem, post a little sample data (CREATE TABLE and INSERT statements) and the results you want from that data.
    Edited by: Frank Kulash on Mar 16, 2010 12:16 PM

  • How do I get rid of the specific warning about not having backed up to i Cloud for 2 weeks. I cannot use my iPad at present.

    How do I get rid of the specific warning about not having backed up to i Cloud for 2 weeks. I cannot use my iPad at present.

       

  • Hi.. i bought an ipad from frys store last week. but when i use it, the home button has some strange sound when i push it. if i want to exchange at apple store, it could be

    hi.. i bought an ipad from frys store last week. but when i use it, the home button has some strange sound when i push it. if i want to exchange at apple store, it could be

    Does Target accept returns from something you bought at Wal-Mart?
    Bring it back to Fry's.

  • Z3200 Yellow ink tube ran dry without stopping and prompting me to install new cart

    The yellow ink in my Z3200 ink ran out after warning me it was low. It never stopped printing when a replacement cart was needed. Now my yellow line is dry. What do I have to do to get ink in the line to resume printing?Thanks for any help. Peter

    Those are the same setup heads that come with the plotter.  Just do a google search for the part Q6675-67004 and you will see they are the same as the ones you used when you first got the machine.  You will also need to purchase another printhead since the current head is empty or has air in it and trying to use it will cause air in the tubes again.  There is another method you can use for one color.  Just get yourself a hypo like for diabetics and remove the printhead, insert the needle in the rubber in the front where the pin from the printhead goes and draw ink until the hypo draws a full amount of ink.  You will have to draw the hypo, remove, press down on the plunger, draw again, etc until you get ink.  You will still need to replace the printhead.

Maybe you are looking for