C7250 All In One When scanning; when scan job completed, there is a problem with HP Scanning

Using Windows Vista Home Premium edition.  Using HP C7250 All in One.
When scaning a document when the scan job is completed, a window pops up that there is a problem with HP Scanning and need to close the program.  It occurs on every scan.
When you click the close program button, the HP program indicates completing scan, one page after the other!
Not sure what is going on, I have used the HP scan/print doctor, says everything is OK.  
I have checked for HP updates and there are none!  The only thing I have not done is to run the installation disk!
Anyone have any ideas as to the problem and a resolve to fix the problem?  other than buying a new unit!!
Thanks for your help

Hi flamechaser,
Welcome to the HP Forums.
I see that you are having some issue's when attempting to scan to the computer.
I do have a few suggestions we can try in the attempt to troubleshoot this issue.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a document that deals with communication issues between the computer and printer. Please click on the following link for a Windows Error: 'No HP devices have been detected. HP Solution Center will now close.'
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,  
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Similar Messages

  • I purchased an album last night. When I downloaded it, there was a problem with 2 of the songs. I went back to available downloads

    I went back to available downloads & clicked the appropriate button. It said the songs downloaded. One of them only repeats the first few seconds of the song, starting over at the same spot. I need the whole song...Please help!

    If the device has been used as designed, the pics and via taken with the device would have regularly been copied off to a computer.
    The first step in the update process via iTunes on the computer is a backup.
    Restore the device from the most recent backup.
    If data is lost, then it is merely the fault of the user for not backing up the device or saving their data regularly.
    Once the device is in recovery mode, the ONLY option is to restore.

  • Error message fax scan canceled on officejet 4500 all in one when faxing from the solution center.

    I keep getting the error message fax scan canceled on my hp officejet 4500 all in one when I try to fax from the hp solution center,I have no proplem faxing from the officejet 4500 itself. I appreciate any light that you can shed on this matter.Thank you.

    Hey @kburns7934 ,
    I just sent you a private message. If you are not sure how to check your forum messages this post, has instructions.
    Enjoy your Monday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • C7250 All in One "Disconnected" error when trying to use Solution Center

    This C7250 All in One is connected via USB to our home desktop, and we also connect wirelessly when using laptops. From my laptop when printing from various programs or e-mail the printer works fine. However, when I open Solution Center to attempt scanning or managing documents Solution Center says "Printer Disconnected" and will any functions through this program. Any ideas?

    Hi All,
    I got this resolved by myself. I have used a static text in my report with html code. HTML code contains &nbsp for space. And the issue was that I did not terminate &nbsp with a semicolon. That caused the error.
    Solution: If you are using html for leaving space between sentences, then always terminate like this -  
    :) J
    Edited by: user10735873 on Oct 1, 2009 5:24 AM

  • HP Envy 4500 all in one wont scan or copy

    Hi all. I have a 4 month old Envy 4500 all in one printer & it has stopped scanning &/or copying. 
    It wil print from any of the laptops on the network but will not scan a document or copy either from the desktop icon or directly from the panel on the printer. 
    I've tried everything, uninstalling & re installing from CD rom, I've run the Scan & copy driver doctor & that says there's a problem with the driver, tells me to unplug the pirnter & restart computer, done all that & still nothing. 
    When you try to scan the printer draws the paper in & then the screen just sits for hours with the progress bar on "scanning" or "copying" & nothing happens. If you cancel the job (on pc or printer panel) even the "cancelling" sticks on the screen for hours, the only way to clear it is to shut down printer & restart, but still it doesnt fix it. 
    I think there's a fault with the arm thing that moves across the screen & copies/scans the document on the glass. 
    Its under warranty but I've tried everything for 3-4 days now & getting nowhere
    Someone please help 
    BTW. My wife laptop was on windows 8.1 & I was on Windows Vista but I have just changed to new laptop in last 24hrs with also Windows 8.1 but the problem started well before I changed my laptop from Vista AND exactly the same symptoms happen from my wifes pc with Windows 8.1. 

    Ok thanks for all of this. I tried it all & still no joy. 
    I do think (as I have all along that it is a hardware fault) 
    I will speak to Amazon as I cannot afford to be without a printer whilst it goes off for repair
    UPDATE: Amazon customer service is UNBELIEVABLE!! They're just sending a new printer out & once I get it I just need to send old one back. Love Amazon!

  • Trying to use HP All-In-One to scan with Airport.

    I just picked up an HP Officejet 6210 all-in-one. I got it set up and plugged into my Airport Extreme Basestation. I did a print test from my (wireless) MacBook and everything worked fine.
    Next I tried to open the scanning software. I kept getting a message saying there was no scanning device connected. Then I would plug the USB cable to the Officejet directly into my MacBook and everything worked fine.
    I chatted with an HP tech online and they said I would have to use HP's wireless router and get rid of the Airport Extreme to be able to do everything on the Officejet using wireless, and that by using the Aiport Extreme I would only be able to use the print functions and plug in directly whenever I wanted to scan or fax.
    This *****. Have any of you run into the same problem? Is there any way to use all of the features (printing, scanning and faxing) of the HP Officejet using the Airport Basestation?
    Thanks very much,
    Ted Vieira

    Can I scan using my all-in-one when it is connected to the USB port of an Airport Express or Airport Extreme Base Station?
    http://discussions.apple.com/thread.jspa?messageID=610763&#610763

  • There's a problem with the drive scan drive message appears when plugging in ipod into a new windows 8 computer

    I have a new Windows 8 laptop. I copied all of my music onto it. I then plug in my ipod and get "there's a problem with this drive, scan and fix now". When I click scan and fix it tells me "can't perform the check because Windows can't access the disk.".
    I uninstalled iTunes and reinstalled it - but same problem.

    bump, I have same issue. thanks, MM

  • When I hook my ipod to computer it reads: there is a problem with this drive scan the drivenow and fit it (F) it doesnt work

    when I hook up ipod up to to itunes it reads:  IP F  There is a problem with this drive.  scan the drive now and fix it.   When I do this, nothing happens.

    Hello,
    I found the same issue. I have an iPod Classic 160 GB (Black) bought in April 2013. I'm using a Windows 8 Laptop bought in August 2014.
    This is my account of this problem and why I think customers should just ignore the pop-up, but Apple (and possibly with Microsoft/Windows) should look at the issue.
    Recently (approximately from early February 2015), when I connect the iPod to my computer I get a message saying there is a problem with the drive and it needs to be scanned and fixed. In full the message reads:
    There's a problem with this drive. Scan the drive now and fix it.
    This message appears very shortly and then immediately (once the message disappears, is clicked on, or x-d) brings up Windows File Explorer on the drive and its containing visible folders: which tells me nothing (though it can clearly open it and look at the files not locked to iTunes)
    Other than this, the iPod seems to connect properly and work fine. iTunes (ver: 12.1.0.71 64bit) seems to find no issue. The iPod runs fine, it syncs properly (all of my music and podcasts). It responds as it always has and works for hours.
    I did some troubleshooting: first on the wire, trying all ports and using an alternative, then on my laptop (all usb ports with other connectors and device drivers) and some basic testing of the iPod and iTunes. All of these seemed fine to me, no issue whatsoever other than the message every time I connect the iPod. So I just ignored it for a while.
    Anyway, eventually I got curious (and had some more free time to look at it) and let Windows 8 do what it wanted (scan and fix the drive). Clearly the iPod works fine, and I have nothing important on it that isn't on my computer, so at worst Windows will break the software and I'd have to reformat the drive through iTunes (and Restore to Factory Settings) which I feel fine doing. I also took note of all of my settings on the iPod (like EQ, and the way I laid out the menus etc...) so I can redo those from defaults.
    Prior to doing this, the iPod was version 2.0.5 (the latest version).
    When I set the drive to be scanned, windows told me it identified the problem and would fix it. I don't remember the exact wording, as this message was immediately obscured by a pop-up telling me the drive was in use and software using it should be closed. So I closed iTunes which in turn caused the pop-up and message to disappear.
    Windows then said it had succeeded and brought up the File Explorer of the drive again (now with some folders missing). When I loaded iTunes back up, it told me there was a problem with the iPod and it would need to be restored. Ejecting the iPod showed that it seemed to believe it had no content on it.
    So I restored the iPod through iTunes, downloading the latest iPod update again and started syncing the iPod. After adding a couple songs, I ejected it and played them - they worked fine, the menus had returned to defaults but I quickly changed them to how I liked and overall the iPod is back to how it was. I've now set it to sync the remaining thousands of songs (and couple hundred podcasts). Edit - by the end of this post, this has finished copying Music, Podcasts, and Playlists. It's back to exactly how it was before.
    Annoyingly, this has not removed the pop-up message when I connect the iPod, still the same as before - the most irksome thing being the file window opening every time i connect the iPod, though this is still minor (I just have to remember that this will happen and manually close it each time).
    So I'm at a loss on the cause, and am going to return to ignore it. I'd greatly appreciate if Apple could look into this. I'm wondering if it is a recent update to iTunes or to Windows, but I don't trust that I won't be able to undo changes if I myself began looking through them (and I lack the time and expertise to do that effectively). I think there might be that Windows is detecting something in the way that Apple formats their iPod drives that it believes is an issue (even when it isn't). My guess is the way of formatting is unchanged (the iPod hadn't received an update recently to suggest and alteration to this) but maybe the things Windows is looking for may have slightly changed and disagrees with Apple's way of keeping the iPod Drive proprietary to iTunes.
    TL,DR: Advice to others (and Ljchicago) searching this topic is to ignore the message for now.
    Thanks,
    Dixavd

  • When I connect my nano to my computer I receive the following message: There is a problem with this drive. Scan the drive now and fix it. My computer recognizes the ipod but the play lists saved in my itunes library are not the playlists that are on my na

    When I connect my nano to my computer I receive the following message: There is a problem with this drive. Scan the drive now and fix it.
    In addition, when I connect my nano, my computer does recognize but the library and playlists in my Itunes is not the same as the library/playlists on my ipod (on this ipod). If I purchase new songs from itunes, they go to the library on the computer but I cant get them to the ipod playlist.

    bump, I have same issue. thanks, MM

  • C3135 All-In One: When I turn it on, it feeds 1 sheet of paper half-way through and then stops.

    C3135 All-In One: When I turn it on, it feeds 1 sheet of paper half-way through and then stops.
    Even does this when not connected to the PC. I have tried a reset.

    I don't know of one place JUST for this. I usually step people thru it on the WIndows forums so 1) they don't fudge up things even more and 2) sometimes windows wants to be a pain and stuff. But You can go here and roll down to "Format in windows" http://discussions.apple.com/thread.jspa?threadID=361771
    There are cases where even in disk mode it will not show, or only show for a second in windows under "My Computer". And in these cases you have to open task manager (Hold altctrldel all together to open it) goto the "Process tab", highlight "iPOdservice.exe" and hit end process. If you have to do this, you will have to restart windows when its done formatting so the "ipodservice.exe" is started again in the background and you can use the ipod updater to restore it

  • I have an HP Photosmart C7250 All-in-one - Test Report - The wireless radio is not functioning

    I have an HP Photosmart C7250 All-in-one and the wireless feature does not work.  When I try to go through the Wireless Setup WIzard, the Test Report indicates the following - "The wireless radio is not functioning.  Contact HP Support".  Can you help me?

    Let's reset the printer.  Turn it off, hold the # and 6 keys while turning it back on.  Go to Setup > Network > Wireless Network Test afterward to see if it worked.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I have an hp photosmart c7250 all-in-one the wireless radio is not functioning

    I have an HP Photosmart C7250 All-in-one and the wireless feature does not work.  When I try to go through the Wireless Setup WIzard, the Test Report indicates the following - "The wireless radio is not functioning.  Contact HP Support".  Can you help me?
    This question was solved.
    View Solution.

    Let's reset the printer.  Turn it off, hold the # and 6 keys while turning it back on.  Go to Setup > Network > Wireless Network Test afterward to see if it worked.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • My photosmart C7250 all-in-one used to allow me to print black and white only, now it won't

    My photosmart c7250 all-in-one used to allow me to print in black and white only if I changed properties to print in grayscale, black and white only.  Now it says it won't print until I replace one of the empty color cartridges.  I do no understand why the color cartridges are running out when I only use my black cartridge. 

    I still don't understand the difference between what I used to be allowed that I'm not allowed now.  I was able to bypass the empty color cartridges by changing my print property to "grayscale" and "black only".  Now I'm not allowed to bypass???

  • Setup can't detect network printer Photosmart C7250 all in one

    I volunteer for our local historical society.  The person who did a lot of the computer maintenance work is not active at this time so I’ve begun to look at things. 
    There is a Gateway PC running Windows 7 64 bit home premium, a Sony Vio laptop running Vista 32 bit  home premium, an HP Laser printer and (of most importance here) an HP Photosmart C7250 All in one printer.
    Internet connectivity is via a dsl line with a combination modem/router.  I think the modem/router is a Westell or an Actiontec through Frontier Communications (formerly Verizon in this area)  but I’m not sure and I’m not at the museum now.
    A couple of weeks ago I was able to connect the laptop to the network via wifi.  My next step is to connect the laptop wirelessly to the printer so we can print wirelessly over the network.  The printer was originally set up through a usb connection so I changed it to a wired Ethernet connection.  The PC now successfully prints to the printer over the network.  I downloaded the software and drivers directly to the laptop from the HP site and began the installation.  When it got to the point of finding the network printer the software couldn’t detect it.  I then put in the ip address for the printer (from the network info printed out from the printer) and it still couldn’t find it.
    This same situation occurred when I tried to set it up on my personal laptop (Win7 , 64 bit) as well.  Setup couldn’t detect the network printer, even after searching for the network ip address. 
    Since the printer is connected to the network (router) via an Ethernet cable, I don’t have the wifi radio turned on in the printer.  This shouldn’t make any difference.   
    I’ve searched the forums and haven’t seen anything that is like my issue.
    I don’t what else to do.  Hopefully someone will give me some advice on what to do next. 

    Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
    What does it say?
    If the network has Wireless Isolation turned on it will prevent wired devices from seeing wireless devices.  Do you have access to the router?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Photosmart C7250 All-in-one

    AFTER CLEANING THE PRINTHEADS, AND PRINTING A TEST-PAGE TO EVALUATE THE COLORS AND ALIGNMENTE, ALL COLORS ARE OK BUT THE VERY DARK BLACK BAND (THE TWO GRAY ONES ARE OK).  ANY SUGGESTION OR RECOMMENDATION WILL BE MORE THAN WELCOMED.
    jORGE

    Hello @Joarlujo,
    Welcome to the HP Support Forums!
    I would like to assist you today with resolving the black print quality issue that you're experiencing when printing from your Windows 7 computer to your HP Photosmart C7250 All-in-One Printer. Thank you for including the troubleshooting steps you have already attempted prior to reaching out for support. At this time it does sound like you have a defective black ink cartridge, or your HP Photosmart is experiencing a Printhead issue. The Printhead is the part that the cartridges fit into. It controls 'reading' the cartridges and putting ink on the page. If the Printhead is defective than you may experience cartridge detection, or print quality issues. The Printhead is a non-replaceable part within this specific model. Therefore, should the Printhead be defective a whole unit replacement would be needed. In saying that, there are troubleshooting steps that we can attempt to resolve this quality issue. Can I please have you follow the steps below.
    Solution one: Use genuine HP cartridges:
    HP recommends that you use genuine HP ink cartridges. HP cannot guarantee the quality or reliability of non-HP ink cartridges or refilled HP ink cartridges. If you do not use genuine HP ink cartridges, the steps provided might not resolve print quality issues.
    Solution two: Check the ink levels, and then replace the depleted cartridge:
    1. On the printer control panel, press the Setup button.
    2. Press the Down Arrow button until Tools is selected.
    3. Press OK.
    4. When the Display Ink Gauge option displays, press OK. The ink gauge displays.
    5. Please replace any low or depleted cartridges.
    Solution three: Print a self-test report:
    Load plain white paper into the input tray.
    Press Setup.
    Press the Down Arrow () to highlight Print Report.
    Press OK.
    Press the Down Arrow () to highlight Self-Test Report.
    Press OK.
    If the test page printed clearly, check the settings and media you are using, and then try to print again.
    If the report or printout shows streaks, lines, or missing colors, continue to the next solution.
    Solution four: Clean the printhead:
    Load plain white paper in the input tray.
    Press Setup, press the Down Arrow (), press Tools, and then press OK.
    Press the Down Arrow () to select Clean Printhead, and then press OK. A test page prints.
    If these steps resolved the issue, you do not need to continue troubleshooting.
    If the issue persists, continue to the next solution.
    Solution five: Align the printer:
    Load plain white paper in the input tray.
    Press Setup, press the Down Arrow (), press Tools, and then press OK.
    Press the Down Arrow () to select Align Printer, and then press OK. A test page prints.
    If these steps resolved the issue, you do not need to continue troubleshooting.
    If the issue persists, continue to the next solution.
    Solution six: Calibrate the color:
    On the Windows taskbar, click the Start icon (), click All Programs, click HP, click the folder for your HP Photosmart, and then click the icon for your HP printer (). The HP software window opens.
    Click Settings, click Print Settings, and then click Printer Toolbox.
    On the Device Services tab, click Calibrate Color, and then follow the on-screen instructions. The procedure takes about two minutes and requires two sheets of paper.
    Try to print again.
    - Source
    Please respond to this post with the result of your troubleshooting. Good luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Maybe you are looking for