Calculated Keyfigures Fromm Bex Analyzer into BO without Unit

Hi Guys,
We built a Universe on top of Inventory Query from Bex Query Designer. We have lot of Calculated Key figures built on Restricted Keyfigures.
In the Universe some Calculated Keyfigures are shown as folders with Unit value and some of them are not shown in folder and hence it is not bringing the Unit.
If we run the same Query from Bex Analyzer all the Calculated Keyfigures have units associated with them.
Can you please let me know if any of you have the same issue.
Thank you,
PVK

Hello PVK,
I recommend to post this query to the [Integration Kits - SAP|BusinessObjects Integration Kits; forum.
This forum is dedicated to topics related to the BusinessObjects Integration Kit for SAP.
It is monitored by qualified technicians and you will get a faster response there.
Also, all SAP Kit queries remain in one place and thus can be easily searched in one place.
Thanks a lot,
Falk

Similar Messages

Calculated Keyfigures Fromm Bex Query into BO without Unit

Hello,
We built a Universe on top of Inventory Query from Bex Query Designer. We have Calculated Key figures defined on both Restricted Key Figures and also just as the sum of one or more InfoObjects.
In the Universe some Standard Keyfigures based off of InfoObjects are shown as folders with Unit value, but the Calculated Key Figures are simply shown as a Measure - it does not have a folder associated that gives the Unit of Measure.
If we run the same Query from Bex Analyzer all the Calculated Keyfigures have units associated with them.
Can you please let me know if any of you have the same issue.
Thank you,
Jennifer

Ingo,
We are using Business Objects 3.1
Example: The universe is built off of a Bex Query that is going against the standard MultiProvider 0IC_MP04. The query has as part of the key figures the following:
Standard InfoObjects: 0VALSTCKQTY (valuated stock qty) and 0TRANSSTOCK (Stock in Transit)
Calculated Key Figure: CKF_INV_QUANTITY. This key figure is defined as 0VALSTCKQTY + 0TRANSSTOCK.
When I look at the Key Figures for the universe that sits on top of this query, the two standard InfoObjects have a folder that contains: 1) Valuated stock quantity (as a measure) 2) Valuated stock qty Unit (as a dimension) and 3) Valuated Stock qty Formatted (as a dimension). The Stock in Transit is treated the same way.
However, for the calculated key figure, CKF_INV_QUANTITY, I only see the measure that pertains to the sum of the two fields. I do not have a unit associated with that value.
Thanks,
Jennifer

BEx Analyzer: using VBA without using workbooks ???

Hi,
is there any way to use VBA-scripts, while not using workbooks ?
short description of my problem:
I want to place an button in every Querie (not only in workbooks), which shows an short description of the query.
/edit
Or does anyone knows an other way to solv my problem (e.g. using an User Exit,...)?
Kind regards
Sebastian
Message was edited by:
Sebastian Bellmann

Thanks for answering,
but that's not what i'm searching for.
Now a more detailed description of my probelm.
I'm searching for a mechanism to place (automaticly) a Text in an empty row of a Query ( e.g. to display "That is a Testquerie don't use " or to display a Help message ).
To solv this I found a couple of functions (e.q. UPF_EXCEL_AFTER_DATA_PUT_01 or RH_START_EXCEL_WITH_DATA) but they don't work .
Maybe I'm just to stupid to handle them right...
Hope somebody can help me.
Kind regards
Sebastian Bellmann

TRYING TO LAUNCH BEx ANALYZER FROM R3 SYSTEM, WITHOUT LOGIN AGAIN...

Hi mates,
We are trying to launch BEx Analyzer, with a Program/Function from R3 System, using an RFC.
1.- We create a program in R3 system (4.6c), in that program we try to call BW (SAP BI 7.0, SP18), with:
        - CALL FUNCTION 'RSAH_LAUNCH_TRANSACTION_SLAVE'
          DESTINATION **RFC TO BW**
         EXPORTING
        TRANSACTION                  = 'RRMX'
or
       - CALL FUNCTION 'RFC_CALL_TRANSACTION_USING'
          DESTINATION **RFC TO BW**
             EXPORTING
               tcode                         = 'RRMX'
               mode                          = 'N'
With that, or calling an Z transaction, with an Z program, and calling the next functions in the BW program:
         'RSSEM_QUERY_LAUNCH'
         'RSAH_LAUNCH_EXCEL'
         With o without setting Infoprovider and Query or Workbook in the functions.
The result was the same:
1.- R3 call BW - OK
2.- BW call BEx ANALYZER/EXCEL - OK
3.- Analyzer shows, but the user have to login again in BEx Analyzer to open queries or workbooks, and that step we are trying to hide to the users.
We need that users call BEx ANALYZER from R3 to BW using an R3 program or transaction, without login again into BW or BEx, but it seems like there is a problem with ANALYZER, RRMX (and its functions) and SSO.
RFC works fine, and is "trusted". Remote connection and Test Connection works OK.
If you make a REMOTE ACCCES with the RFC, and call RRMX, the result is the same, you have to login again in BEx Analyzer, to open queries or workbooks...
We think, must be something wrong with the SSO, or the SSO with BWE and BEx Analyzer, i mean something wrong with the standar or versions.
We tryied with:
1.- BIAddon 9 in Excel 2007
2.- BIAddon 6 in Excel 2003.
We really appreciate your help.
Best regards,
Bruno.

Hi Ravi,
Have you read this whitepaper?
http://www.oracle.com/technology/products/database/application_express/pdf/Extend_Oracle_Applications_11i.pdf
Cheers,
Mike

Unable to Upload data from text file into BEx Analyzer selection screen

Hi,
No response from BEx Analyzer when I am trying to upload around 40,000 material from text file into BEx Analyzer selection screen using "Upload selections" options. But I am able to upload only 10,000 material from text file. I never faced same kind of issue when I am using BEx Analyzer 3.x. Please let me know I have to change any settings related to BEx or any other.
Thanks
Sri Krishna Ponnada.

Hello
It seems you are reaching the .NET memory limitation informed in note 1040454.
Because 3.5 does not use .NET it can work that.
Regards,
Ricardo

How to save BI report into normal excel sheet in Bex Analyzer

Hi Experts,
version of Bex Analyzer:
Bi addon 7.x
support package 7,patch 1
version 7004.4.0.5
excel-2003
when i am trying to save the report into excel in Bex Analyzer as below:
file-save as->Microsoft excel work.
when I open excel I am getting pop up windowu201Dthis file contains macros with an expired or revoked signature.Since your running under high security level,these macros will be disabled.u201D
when I click ok I am getting one more pop upwindow as u201Cmacros are diabled because the security level is set to high and a digitally signed trusted certificate is not attached to macros.to run the macros,change the security level to a lower setting(not recommended),or request the macros signed by the author using a certificate issued by a certificate authority.
what are these macros? why i am getting this pop up windows
When i opened the excel report is not looks like general excel report.how can I generate general excel report .I should not want to get excel report as in bex analyzer.I donu2019t want to have author ,status of data,chart,filter,information in excel report.
what settings I have to made to save the report in general excel format.
As i am new to Bi please correct me if i am wrong.
Anything is appreciable.
regards,
naresh.

Macros in general are nothing but piece of code in excel.
To allow unsigned macros to run, the Trust all installed add-ins and templates check box must be selected on the Trusted Publishers tab of the Security dialog box. This option is selected by default. If it is not selected (recommended), Excel allows you to run only macros that have trusted digital signatures.
1. On the Tools menu, point to Macro, and then click Security.
2. On the Trusted Publishers tab, select the Trust all installed add-ins and templates check box.

Start Excel 2007 without BEx Analyzer 7.0

Hi there,
I use Excel 2007 and if I start "Excel 2007" the Analyzer 7.0 starts automatically. Does anyone know how I can start Excel without the Analyzer? It seems that it's no AddIn (*.xla like Analyzer 3.5) but an *.exe.
Thanks for any help,
NIcole

Hi,
Go to BEx analyzer -> Global settings and there untick 'Start BEx Analyzer When MS Excel Starts'. That should stop it.
Regards,
Michael
Edited by: Michael Devine on Jul 21, 2011 2:22 PM

How to bring InfoAreas into BEx Analyzer

Hi Experts,
Q1: I have a total of 24 InfoAreas in InfoProvider(Admn Workbench), but I do see only 7 of them in Open Query dialog box of BEx Analyzer. How do I bring in a particular InfoArea(and all related objects) into Open Query Dialog box.
Q2: I want to see all the queries in Transport Connection's Query Elements(for selection to transport). I have 7 queries in BEx, but I could see only 2 in Transport Connection.
Please help.

Hi,
You can only see those for which you have queries created...to see all, click on the new query icon (blank page).
You can click on Select Objects and look for the other queries. The list is just like some 'history' viewing.
Hope this helps...

Bex Analyzer Calculation of Results

Hello,
I have created a query using Bex Analyzer. In the query I am also using a formula to calculate forecast accuracy. When I execute the query the formula works fine in the rows.
The problem is the (yellow) overall result row. Here the result is not correct because it is supposed to be calculated differently. In the query properties the settings for "Calculate result as.." are limited and do not serve my purpose.
Is there a way (workaround) to calculate the result in the overall result row differently, maybe using VBA (does anyone have sample code in this case) or is there any other option?
Thank you very much for your help.
Christian

Hi Heike,
First of all thank you very much.
When I use "leaf(xyz)yourformulaforsinglevalues + not leaf(xyz) yourforumulaforresultrows" what should I include in the brackets where you mention (xyz)?
Does this "leaf-function" work for all drilldown levels, meaning I define the formula using the formula editor, execute the query and make a drilldown according to another characteristic and have the correct result for the single values and the result rows at that level of detail too.
Thank you very much for your help again. I really appreciate that.
Christian

BW ERROR while calculating local formula in Bex analyzer

Hi gurus,
Their is an error comming up on a report which is opened in Bex Analyzer. When we create local formula i encounter this error.
It says"
"Program error in class SAPMYSS1S method :uncaught exception "
"System error in program SAPLRRK0 and form DELETE_FST-01"
Not sure of why this error is comming up.
DO we need to update a OSS note for this.
Please suggest .
Regards,
Balaji Raj

Search SCN & Marketplace.

Query executes in RSRT but not in BEx Analyzer

Hi Everyone,
I have a query for an infocube and ods object, in the bex analyzer for the infocube the query executes which has around 5000 records but for the ods object which has also 5000 records comes up with this error.
An exception with the type CX_SY_EXPORT_NO_SHARED_MEMORY occurred, but was
neither handled locally, nor declared in a RAISING
Message no. RS_EXCEPTION000
when I execute the query in RSRT it comes up.
After closing and re logging into bex analyzer executes the query for the first but for the second time again it throws up this error.
What could be the problem? Can anyone please let me know. Its really really urgent.
Thanks,
Prashant.

hi Prashant,
try check in RSRT, after choose your query, click 'properties' and set cache mode to 'main memory cache without swapping'.
also check oss note 656060-OLAP: Cache main memory displacement not functioning.
hope this helps.
Symptom
Although one of the following two cache modes
Main Memory Cache Without Swapping (mode 1)
Main Memory Cache With Swapping (mode 2)
is set for a query, long runtimes occur when you execute the query. The statistics (table RSDDSTAT) display the database times.
If there is a heavy system load, the following message can also appear: RS_EXCEPTION000: No left space in shared memory.
Other terms
Cache, performance, displacement, shared buffer
Reason and Prerequisites
This problem occurs because the shared memory is insufficiently dimensioned.
Solution
Increase the amount of shared memory. The size of the shared memory should be at least 200 MB. You can refer to transaction RSRCACHE for the amount of memory reserved by the main memory cache (RSRCACHE -> Main Memory: Shared Memory/Buffer Reserved).
The corresponding settings are (at least):
rsdb/esm/buffersize_kb = 200000
and, as a precaution, also
rsdb/esm/max_objects = 10000.
Alternatively, for queries with large resulting quantities, you can convert the Cache Mode in transaction RSRT1 to
Cluster/Flat File Cache for Each Application Server (mode 3)
Cluster/Flat File Cache Across Each Application Server (mode 4)

Calculated keyfigures not defined correctly error when executing query

Hi Experts,
I changed calculations in the calculated keyfigures and saved successfully.
when I execute the query in BI7 Bex, I am getting errors like query element not defined correctly in the query. when I look into query in the designer its giving info messages for many calculated keyfigures saying reusable and saving can influence other queries.
I reverted back the changes but the errors still coming up. I tried to copy the query and run it ..still didnt helped..
Please suggest me with the solution..
Quick replies are much appreciated and awarded.
Thanks
Vanaja

Hi,
The calculated keyfigure is the difference of two other calculated keyfigures...
I tried to re-drag and drop into keyfigures column and didn't worked and still getting the errors.
Please suggest some more..
Thanks
Vanaja

Bex analyzer variable screen input ready?

Hi Experts,
If we open a query in the Bex analyzer (BI 7.0 netweaver 2004s), it seems only possible for us to enter variables in the dialog screen after the pushbuttons Ctrl + K for each variable. Is it possible to change the default setting in the BEx analyser variable screen, so that the variables are ready for input (without the ctrl + k)?
In the SAPhelp information, only the following information is provided.
Prerequisites
In the BEx Analyzer, you have executed a query that contains variables and you want to change or personalize one or all of the variables in the query.
Procedure
1.      In the analysis toolbar, choose Change Variable Values or in the menu, choose BEx Analyzer ® Change Variable Values.
The Select Values for Variables dialog box appears. Follow the instructions to select a value to assign to the variable.
2.      Specify a variant name and values for the variables for which you want to change the current values.
Switch to display mode or use the pushbuttons Ctrl + K to enter values.
Kind regards
Dennis
Message was edited by:
        D.C.M. van den Oord

Hello All,
We have a similar issue only in 2004s query designer when we execute a query via the web. We have the variable set up to accept multiple single values and we can pick multiple single values and add them, however, we cannot paste a list of, for example, personnel numbers from an excel spreadsheet into the web selection box to add multiple single values at one time. Does this functionality exist?
Regards,
Ann Bohn

Calculating Age in BEx Query

I want to calculate age of Order based on Order create date. I am having order create date as key figure date in Order cube. Age is calculated at runtime as (Last day of month) - Order create Date. For Example.
If ORder 'A' is created in 10/01/2004 and if query is executed at 12/31/2004 then Query should produce output as follows:
Order Number        Month    Age
A                   10/2004 31 Days
A                   11/2004 61 Days
A                   12/2004 92 Days
In my infocube I've only one record for this order with Order number and Order create date. How to produce above mentioned o/p from this.
Thanks,
Milind

Hi Milind,
if you are looking for a web solution, use a table interface to create a new column for the age. You can calculate the value for the order age with the table interface, too. An advantage of this table interface solution is, that you can concatenate your unit [days] into the output range, like "31 Days".
For BEx Analyzer, you can create a VBA macro to get the same advantage...
rgds Jens

BI 7.0 Bex Analyzer Workbook - Convert to formula function features

Hello,
when using the convert to formula function in a BI 7.0 Bex Analyzer Workbook (WB) the result area becomes completely static.
1.) Is there a possibility to add drill downs / across into an already converted to formula WB?
2.) I inserted drop down boxes to allow F4 like selections, however those are pointless if several characteristics are being used i.e. the keyfigure results get blanked out. Is there another way to do this at all?
3.) Could someone provide me with a real live example / whitepaper how the convert to formula function can be used?
Many thanks for any feedback on this.
Regards
Christian

>
ChrisAC wrote:
>
> 3.) Could someone provide me with a real live example / whitepaper how the convert to formula function can be used?
>
> Many thanks for any feedback on this.
>
> Regards
>
> Christian
It does become static and all the workbook gets all the excel property.
The key figures are now calulated on the basis of your data provider from the server as a formula in each cell..
I had used to populate my key figure only for the required values of a characteristic.

Calculated Keyfigures Fromm Bex Analyzer into BO without Unit

Similar Messages

Maybe you are looking for