Calculated SAP USER ID not binding
Hello Users,
I have to calculate the SAP user ID in the method and then bind this to a container which is set up to flow to a send mail step where it is input as recipient type: Organization object and the expression is the container element. The container element is multiline (if multiple SAP users need to be output) and is type SWHACTOR where OTYPE = u2018USu2019 and OBJID = SAP USERS.
However after multiple testing in SWUS and using the debugger the workflow fails with message u2018No administrator for tasku2019. I debugged through the method and I am sure that the container element is populated in the method but when I debugged into SENDTASKDESCRIPTION , ADDRESSSTRINGS is initial which is the issue .
ADDRESS_STRINGS is a table container so my code in the method to set it is
SWC_SET_TABLE CONTINER <>, could this be incorrect? (should I set up the table variable as type ADDRESS_STRINGS and not SWACTOR)
Has anybody any suggestions as to what could be the issueu2026.when I change the expression on the SENDMAIL to WF_INIIATOR then the workflow completes but the user message must not go to the initiator of the workflow but to the calculated SAP USERID.
Any suggestions will earn points
Regards
David Dittmer
Hi David,
I think you're mixing up two separate issues here:
1) get the users you want to send a mail to (with a method)
2) send the mail to the users using a SendMail step in the workflow
You can look in the workflow log to see if 1) returns any users to the workflow.
If it does, you just have to bind that same container element to ADDRESSSTRINGS in SendMail and it should work.
I just tried it with a test workflow. I created a workflow container element called TESTMAIL with type SWHACTOR,
multiline, import and export and I put two initial values into it: US BAKKERR and US SMITHG.
I then created a SendMail step (which requires the creation of a new task) and in the binding attached &TESTMAIL& to &ADDRESSSTRINGS& (I left the default binding of G to &TYPEID&). It worked.
Please try that and figure out if your problem is with 1) or 2).
regards
Rick Bakker
hanabi technology
Similar Messages
-
Hi All,
In one of my clients, SAP* does not exist but DDIC exists.
Please tell me what can I do?
Copy user from 000 to the client I'm working on?
ByeYou can just create him using SU01 and assign the required profiles (compare with client 000).
The question is, why it does not exist.
You can check the change documents for users and find out who did what and when.
Nevertheless, it is not mandatory that SAP* exists on every single client of a system. As long as the value of the profile parameter login/no_automatic_sapstar is set to 1.
If it is set to 0, you have two options: either create the user immediately with a safe password, or change the value of the above parameter from 0 to 1.
Otherwise, your system is extremely vulnerable to attacks.
Regards,
Constantina -
SAP* user doesnt have full authorizations.
Hi All,
my Admin user for EP7 portal is locked.
Tried to activate the sap* user to chang the password of my admin user,
but strangely the sap* user is not able to do so too.
When i click on User Admin on the sap* user I get a mesage saying
"you have not enough rights to perform this contact your systemadministrator"
I fail to undrstand how can sap* user not have rights to admin...when its purpose is to
act as emrgency admin user.
Now I am helpless as this is the only way to reset admin password....
What should I do...
please help......Did you restarted the j2ee java.
Also check the below blog
SAP* - The Saviour
Raghu -
Change User password not working in SAP ME 6.0
Hi,
In SAP ME 6.0 SP01 6.0.1.0 Counter 40, the activity "Change User Password" does not work for me or any other user.
The activity window (Netweaver) shows, but in the top it says "An error occurred - contact system administrator".
This is the output from the default trace file. Seems my user is not authorized, but where do I set this authorization?
Br,
Johan
#2.0 #2011 09 06 11:15:11:064#+0200#Error#com.sap.security.core.wd.jmxmodel.JmxModelComp#
#BC-JAS-SEC-UME#sap.com/tcsecumewduimodel#C0000AD3034800820000000100000450#9934850000000004#sap.com/tcsecumewdkit#com.sap.security.core.wd.jmxmodel.JmxModelComp#JONORD#16##380199ECD86811E088C3000000979802#ae0e9d52d86811e08e7a000000979802#ae0e9d52d86811e08e7a000000979802#0#Thread[HTTP Worker [@312363456],5,Dedicated_Application_Thread]#Plain##
public void supplyCompany(IPrivateJmxModelCompInterface.ICompanyNode node, IPrivateJmxModelCompInterface.IContextElement parentElement)
[EXCEPTION]
com.sap.engine.services.jmx.exception.JmxSecurityException: Caller JONORD not authorized, required permission missing (javax.management.MBeanPermission -\#getCompanyConceptEnabled[:SAP_J2EECluster="",j2eeType=UmeJmxServer,name=IJmxServer] invoke)
at com.sap.engine.services.jmx.auth.UmeAuthorization.checkMBeanPermission(UmeAuthorization.java:100)
at com.sap.engine.services.jmx.JmxServerFrame.checkMBeanPermission(JmxServerFrame.java:101)
at com.sap.engine.services.jmx.MBeanServerSecurityWrapper.checkMBeanPermission(MBeanServerSecurityWrapper.java:438)
at com.sap.engine.services.jmx.MBeanServerSecurityWrapper.invoke(MBeanServerSecurityWrapper.java:288)
at com.sap.engine.services.jmx.ClusterInterceptor.invoke(ClusterInterceptor.java:813)
at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.invoke(MBeanServerInterceptorChain.java:367)
at com.sap.security.core.jmx._gen.IJmxServer$Impl.getCompanyConceptEnabled(IJmxServer.java:1415)
at com.sap.security.core.wd.jmxmodel.JmxModelCompInterface.supplyCompany(JmxModelCompInterface.java:1498)
at com.sap.security.core.wd.jmxmodel.wdp.InternalJmxModelCompInterface.supplyCompany(InternalJmxModelCompInterface.java:710)
at com.sap.security.core.wd.jmxmodel.wdp.IPublicJmxModelCompInterface$ICompanyNode.doSupplyElements(IPublicJmxModelCompInterface.java:4301)
at com.sap.tc.webdynpro.progmodel.context.DataNode.supplyElements(DataNode.java:110)
at com.sap.tc.webdynpro.progmodel.context.Node.getElementListAsObject(Node.java:263)
at com.sap.tc.webdynpro.progmodel.context.MappedNode.createMappedElementList(MappedNode.java:78)
at com.sap.tc.webdynpro.progmodel.context.MappedNode.supplyElements(MappedNode.java:71)
at com.sap.tc.webdynpro.progmodel.context.Node.getElementListAsObject(Node.java:263)
at com.sap.tc.webdynpro.progmodel.context.MappedNode.createMappedElementList(MappedNode.java:78)
at com.sap.tc.webdynpro.progmodel.context.MappedNode.supplyElements(MappedNode.java:71)
at com.sap.tc.webdynpro.progmodel.context.Node.getElementListAsObject(Node.java:263)
at com.sap.tc.webdynpro.progmodel.context.Node.getElements(Node.java:270)Hi,
Change User Password screen is in fact user self services screen of NW UME and to access it, user must have Manage_My_Password action. Installation and Security Guide ask to assign this action to all roles. -
How to send an email with from address not as a SAP user id
Hi,
sender = cl_sapuser_bcs=>create ( pv_user ).
I am using the above piece of code to send an email.
In the method "CREATE" , I CAN PASS ONLY THE SAP USER ID.
But i want to pass the email address (user) which does not a SAP user id?
how to do this.Hi Brad Bohn,
I have coded like below. I could see the mail in SOST, in that from address is as 'myname'.
But the mail does not reaches to the recipient.
Can you tell me where the problem is?
DAta:: from_addr TYPE REF TO CL_CAM_ADDRESS_BCS,
lo_bcs_recipient TYPE REF TO if_sender_bcs,
send_request TYPE REF TO cl_bcs.
CALL METHOD cl_cam_address_bcs=>create_internet_address
EXPORTING
i_address_string = 'myname at the rate of domain'
i_address_name = 'myname'
RECEIVING
result = from_addr.
CALL METHOD send_request->set_sender
EXPORTING
i_sender = from_addr.
CATCH cx_send_req_bcs .
IF sy-subrc <> 0.
CLEAR sy-subrc. " added to hide warnings.
ENDIF. -
SAP* user not working in new client
Hi,
I created a new client from SCC4. And now I am trying to login with SAP* user and pass password but it is not allowing. Note provided in SAP Config Guide is not working.
I installed SAP Solution Manager 7.0 SP12 and then created a client.
Please let me know how to solve this issue.
Points will be awarded.
Regards.Hi!
I agree that the issue is probably due to the parameters for the automatic user SAP* - not sure about the Masterpassword though - the newly created client is only an entry in a table at this stage, so I don't think the system will know any password but the hardcoded one...
Something you should be very careful about is the Java-Stack, which is part of SolMan7 and which runs SMD. The Java stack can only interface with one client properly, so I am not sure what's the idea behind the newly created client.
Regards,
Jörg -
Users are not able to access two different SAP portals at a time
Hi Experts,
Users are not able to access two different SAP portals at a time, if users login the OLD SAP Portal then they are not able to access NEW SAP Production Portal asking user id's & Password while doing ECC & APO transactions.
If user clear the Internet Explorer cache then for time being they can access but its not the permanant solution.
Can any one please help me on this.
Thanks,
JayHello Jay,
here we are facing this problem, this company users not able to access both the portals at at time
If you want to access HTC and Armed at the same time you gotta complete SSO Config or User mapping between these two Portals. You can refer to the below link for more details.
http://help.sap.com/saphelp_nw04/helpdata/en/f8/3b514ca29011d5bdeb006094191908/content.htm
Thanks
SM -
General users can not send emails from SAP themselves except sap_all user
Dear experts ,
General users can not send emails from T-CODE: SO00 themselves except the users
which Assigned SAP_ALL Authorization Profiles .
We hit SAPconnect trace Error : SO_OBJECT_MIME_GET Exception: 2 .
No MIME Document Received. Error Code: UNKNOWN .
How to can i solve the problem ?
Thanks a lot in advance .Thanks for your Reply .
I had set default domain in SCOT ,and email address in su01 .
we can send email successful only SAP_ALL users .General users can not send emails from SAP themselves
Is anybody else to help me ?
Thanks a lot in advance . -
Managers who are not SAP users
Hi everybody.
I have an assignment to create a workflow that sends emails to the manger of an employee when the trial period is over.
The manager in return has to send information to the HR Department, whether or not the employee should receive a permanent contract.
Not all the managers are SAP users. Do you guys have any idea how to implement this? I can find the mangers via a rule. And I can figure out his personnel number, and even the email from the HR master data, and send an email. But I don't know if I can handle a response..?
Please advice.
HuldaHi,
Basically you need to set your workflow to wait for an event. And the event will be triggered by the incoming email.
As already said, do some searches about transaction SO28 and check for example the following thread: http://help.sap.com/saphelp_nw70/helpdata/en/6c/69c2e3418d11d1896e0000e8322d00/content.htm
Regards,
Karri -
Class cl_bcs there's a way to set sender by dummy e-mail not by sap user ?
Someone know if there's any possibilty to do this ?
Hi,
you can change the sender from SAP user to some other external mail id.......but that mail id must be a valid one.........
check the below code
DATA: send_request TYPE REF TO cl_bcs,
text TYPE bcsy_text,
document TYPE REF TO cl_document_bcs,
sender TYPE REF TO cl_cam_address_bcs,
recipient TYPE REF TO cl_cam_address_bcs,
bcs_exception TYPE REF TO cx_bcs,
sent_to_all TYPE os_boolean.
TRY.
send_request = cl_bcs=>create_persistent( ).
APPEND 'Hi test' TO text.
document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = text
i_length = '7'
i_subject = 'test' ).
send_request->set_document( document ).
sender = cl_cam_address_bcs=>create_internet_address(
'test at abcd.com' ).
recipient = cl_cam_address_bcs=>create_internet_address(
'test at abcd.com' ).
send_request->set_sender( sender ).
send_request->add_recipient(
EXPORTING
i_recipient = recipient
i_express = 'X' ).
send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = sent_to_all ).
COMMIT WORK.
CATCH cx_bcs INTO bcs_exception.
EXIT.
ENDTRY.
i hav replaced @ with 'at'
Cheers,
jose. -
Decision should Not go to all SAP Users if no agent found in rule. How to ?
I am determining user agents in rule , when agent is find decision is going to only the agent sap inbox which is fine.
in some cases no agent is found , at that time decision is going to all SAP users in the system.
I am using Generic Decision task with General task in agent assignment step.
As per our requirement if no agent is found it should do nothing ( means no decision to all users ).
Please help me how can i acheive this .
Regards,
VeeraBrahmamHi VeeraBrahmam,
Does you rule call a function or is it a rule with responsibilities?
If it is a responsibility rule then you could create a catch all responsibility so if no user is found in the other responsibilities you could send the work item to a backup user or admin user who could take action.
If you set the flag as Rick suggested it will set the work item to error so make sure you are aware of this and check work items in error on a regualr basis.
You could copy the Generic User task TS00008267 and maybe set more restrictive users rather than have it set as general. However this means more maintainence.
Regards,
Eddie -
Sap-nw:3300 not reached error in gateway
Dear experts,
I am facing a strange problem after a successful installation of netweaver Java+abap.
when i start the server i found this error
**** ERROR file opened at 20100131 114242 Arab Standard T, SAP-REL 700,0,113 RFC-VER 3 911150 MT-SL
T:2844 Error in program 'igsmux': ======> CPIC-CALL: 'SAP_CMNOREGTP'
LOCATION CPIC (TCP/IP) on local host
ERROR partner 'sap-nw:3300' not reached
TIME Sun Jan 31 11:42:42 2010
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2770
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 1
i ignore the error and i tried to login
after successful login to the portal server when i access the user administration tab. the explorer show
SAP WebAS Engine is starting...
If this state does not change within a few minutes,
please contact your system administrator.
Check the recommendations in SAP Notes: 943498, 764417
Message: Dispatcher running but no server connected!
and the server turns to yellow again when it turns to green again
i checked dev_rd
Sun Jan 31 13:11:15 2010
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 9 / sock 268
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1205) [nixxi.cpp 4424]
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 6 / sock 304
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1148) [nixxi.cpp 4424]
***LOG S23=> GwIDisconnectClient, client disconnected (006) [gwxxrd.c 11592]
***LOG S74=> GwIDisconnectClient, client disconnected ( sap-nw) [gwxxrd.c 11603]
***LOG S0R=> GwIDisconnectClient, client disconnected () [gwxxrd.c 11638]
***LOG S0I=> GwIDisconnectClient, client disconnected ( jlaunch) [gwxxrd.c 11651]
* LOCATION SAP-Gateway on host sap-nw / sapgw00
* ERROR connection to partner 'sap-nw:1148' broken
* TIME Sun Jan 31 13:11:15 2010
* RELEASE 700
* COMPONENT NI (network interface)
* VERSION 38
* RC -6
* MODULE nixxi.cpp
* LINE 4424
* DETAIL NiIRead
* SYSTEM CALL recv
* ERRNO 10054
* ERRNO TEXT WSAECONNRESET: Connection reset by peer
* COUNTER 232
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 10 / sock 256
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1206) [nixxi.cpp 4424]
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 11 / sock 244
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1208) [nixxi.cpp 4424]
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 12 / sock 232
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1207) [nixxi.cpp 4424]
then i try to login again with the browser it give me
Portal Runtime Error
An exception occurred while processing your request
Exception id: 01:27_31/01/10_6192950
See the details for the exception ID in the log file.
any help would be appreciated
<br>
i also wanted to add that telnet 3300 works fine ping to host name is ok
my os win2003 sap 2004s sr3
Edited by: ebrahime on Jan 31, 2010 11:37 AMthanks for your reply. i wanted to add 2 thing after the installation the password i entered in installation was not working for all the super users that is why i had to delete SAP* from database and change the j2ee_Admin password.
you mentioned that the java stack is unable to communicate with abap stack but i can login to portal by j2ee_admin user. but when i go to identity management then it give the error i gave you earlier.
any way the dev_w0 file contents is bellow
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Tue Feb 02 10:23:01 2010
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\ENP\DVEBMGS00\exe\dbdb6slib.dll' ...
B Library 'F:\usr\sap\ENP\DVEBMGS00\exe\dbdb6slib.dll' loaded
B Version of 'F:\usr\sap\ENP\DVEBMGS00\exe\dbdb6slib.dll' is "700.08", patchlevel (0.144)
C DbSl trace SM50: switch request to level 1
B New connection 0 created
M sysno 00
M sid ENP
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 144
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 1604
M
M kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1604) [dpxxdisp.c 1305]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 25168 (1480)
M DpShMCreate: sizeof(tm_adm) 5652128 (28120)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000010E70050, size: 6348592)
M DpShMCreate: allocated sys_adm at 0000000010E70050
M DpShMCreate: allocated wp_adm at 0000000010E72150
M DpShMCreate: allocated tm_adm_list at 0000000010E783A0
M DpShMCreate: allocated tm_adm at 0000000010E78400
M DpShMCreate: allocated wp_ca_adm at 00000000113DC2A0
M DpShMCreate: allocated appc_ca_adm at 00000000113E2060
M DpShMCreate: allocated comm_adm at 00000000113E3FA0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000001146AC30
M DpShMCreate: allocated gw_adm at 000000001146ACB0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000001146ACE0
M DpShMCreate: allocated wall_adm at 000000001146ACF0
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Tue Feb 02 10:23:02 2010
M ThInit: running on host ENP
M
M Tue Feb 02 10:23:03 2010
M calling db_connect ...
C Registering callback for dynamic profile parameters
C DB2 library successfully loaded DB2 library 'F:\usr\sap\ENP\DVEBMGS00\exe/db6_clidriver\bin\db2app64.dll' successfully loaded
C
C DB6 (DB2 UDB) UNICODE database interface 700.08 [opt]
C
C DB6 shared library (dbdb6slib) patchlevels
C (0.8) DB6: V8.2.2 optguidelines in OPEN SQL (note 150037)
C (0.8) Support of SDBUPDEXCL (note 847616)
C (0.9) DB6: use export file for dbdb6slib (note 835135)
C (0.9) DB6: Core in getAndBindSQLDA (note 833183)
C (0.10) DB6: link dbdb6slib.dll on windows with libdb6.obj (note 761159)
C (0.10) DB6: DUPLICATE_KEY on MERGE -> repeat (note 851474)
C (0.15) DB6: wrong CAST for short string ABAP type (note 861905)
C (0.17) DB6: special characters in sidadm passwd (note 865839)
C (0.21) DB6: no SAP_INFO comments (note 873889)
C (0.22) DB6: hints: get correlation names from view texts (note 868888)
C (0.23) DB6: hints: get correlation names from view texts (note 868888)
C (0.26) DB6: DB6_DBSL_CLP_COMMAND STRING_BAD_REF (note 883402)
C (0.27) DB6: activate value compression (note 886231)
C (0.28) DB6: optimization guidelines on views part 2 (note 868888)
C (0.30) DB6: no SQL trace for SQLCancel (note 892111)
C (0.33) DB6: append SAP_TA comment (note 873889)
C (0.34) DB6: activate value compression with quoted names (note 886231)
C (0.36) DB6: Repeat isolated DDL statements after SQL0911 (note 901338)
C (0.41) DB6: add V9 to list of supported DB2 releases (note 912386)
C (0.50) DB6: reread passwords for secondary connections (note 931742)
C (0.52) DB6: double quote table names in optguidelines (note 868888)
C (0.54) DB6: error handling in DBSL CLP (note 940260)
C (0.69) DB6: technical support of DB2 CLI driver (note 962892)
C (0.73) DB6: log table name on TRUNCATE failure (note 970743)
C (0.79) DB6: column type XML in index size calculation (note 982993)
C (0.82) DB6: CAST for SSTRING data types (note 989568)
C (0.86) DB6: long runtimes for R3szchk (note 1000847)
C (0.88) DB6: patch collection Dec 06 (note 1005574)
C (0.96) DB6: patch collection Jan 07 (note 1017852)
C (0.97) DB6: CLP commands with DB2 CLI Driver (note 1024102)
C (0.99) DB6: SUBSTITUTE VALUES with FAE statements (note 1028779)
C (0.107) DB6: patch collection Apr 07 (note 1047194)
C (0.110) DB6: SAP user names ending with non-ASCII char (note 1054555)
C (0.113) DB6: work process type in application snapshot (note 1059905)
C (0.114) DB6: connect using SAPDBHOST and DB2DB6_SVCENAME (note 1062049)
C (0.117) DB6: patch for execution of long DDL statements (note 1069658)
C (0.122) DB6: SNAPSHOT_TBS_CFG table function is deprecated (note 1077963)
C (0.123) DB6: CLP commands on Windows with V9.1 (note 1080149)
C (0.124) DB6: Set DB2CODEPAGE=819 for non-Unicode (note 1084400)
C (0.126) DB6: reuse optguidelines on FAE statements (note 1087375)
C (0.126) DB6: Enforce DB2CODEPAGE=819 for non-Unicode environments (note 1084400)
C (0.128) DB6: db6_free on invalid memory area (note 1092030)
C (0.133) DB6: statement cache enhancements (note 1101031)
C (0.136) DB6: change for enhancement pack installer (note 1111536)
C (0.138) DB6: improoved table size estimate for DB8 V8 (note 1119934)
C (0.144) I5/OS ldappasswd support for 5250 terminal. (note 1129573)
C (0.144) MSSQL: ODBC fastload on separate connection (note 1131805)
C
C Supported features:
C
C ..retrieving configuration parameters
C ..done
C Running with UTF-8 Unicode
C
C Tue Feb 02 10:23:04 2010
C Running with CLI driver
C DB2 client driver version '09.01.0007'
C Connected to DB2 server type 'DB2/NT64'
C Connected to DB2 version '09.01.0007'
C Connect to 'ENP' as 'SAPENP' schema 'SAPENP' o.k.; con_hdl=0
C Database code page is ok.
C Database collating sequence is ok.
C DB2_WORKLOAD=SAP is set in DB2 registry as required.
C CLI Insert Buffering is disabled on single partition databases.
C DbSl trace SM50: switch request to level 1
C DbSlControl: returning SAPDBHOST='ENP'
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20100202 102303 ENP
C DbSlControl: returning SAPDBHOST='ENP'
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Tue Feb 02 10:23:05 2010
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0000000015400050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FFDDA80050, size: 268435456)
M SHM_PAGING_AREA (addr: 0000000015840050, size: 134217728)
M SHM_ROLL_ADM (addr: 000000001D850050, size: 2678942)
M SHM_PAGING_ADM (addr: 000000001DAE0050, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 000000001DB70050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 000000000AE50050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 17, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0000000021540160, size: 30000000, end: 00000000231DC4E0)
B dbtbxbuf: Buffer TABLP (addr: 00000000231E0160, size: 10240000, end: 0000000023BA4160)
B dbexpbuf: Buffer EIBUF (addr: 0000000023BC0170, size: 4194304, end: 0000000023FC0170)
B dbexpbuf: Buffer ESM (addr: 0000000023FD0170, size: 4194304, end: 00000000243D0170)
B dbexpbuf: Buffer CUA (addr: 00000000243E0170, size: 3072000, end: 00000000246CE170)
B dbexpbuf: Buffer OTR (addr: 00000000246D0170, size: 4194304, end: 0000000024AD0170)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 00000000128BEA10
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 000000002DDF00D0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 000000002DDF0610
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2272 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A PXA: Locked PXA-Semaphore.
A System page size: 4kb, total admin_size: 11460kb, dir_size: 11392kb.
A Attached to PXA (address 000007FFEDAB0050, size 300000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=000007FF35ED5000 leng=20955136 end=000007FF372D1000)
A >> Shm MMADM area (addr=000007FF363AEF10 leng=244096 end=000007FF363EA890)
A >> Shm MMDAT area (addr=000007FF363EB000 leng=15622144 end=000007FF372D1000)
A RFC Destination> destination ENP_ENP_00 host ENP system ENP systnr 0 (ENP_ENP_00)
A RFC Options> H=ENP,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 35354 bytes at 000000002DF60050
N SsfSapSecin: putenv(SECUDIR=F:\usr\sap\ENP\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is F:\usr\sap\ENP\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...completed with return code 5.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
B dbtran INFO (init_connection '<DEFAULT>' [DB6:700.08]):
B max_blocking_factor = 30, max_in_blocking_factor = 60,
B min_blocking_factor = 1, min_in_blocking_factor = 1,
B prefer_union_all = 1, prefer_join = 1,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x3, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700, [7000.0.144.20050900]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [16]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N VSI: WP init in ABAP VM completed with rc=0
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume ENP_ENP_00
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Tue Feb 02 10:23:06 2010
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 000000000A960050
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 000000000A9607C0
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 000000000A960800
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 000000000A96080C
M
M Tue Feb 02 10:23:28 2010
M rdisp/rb_cleaned_rfc = 0
A
A Tue Feb 02 10:23:34 2010
A RFC FRFC> fallback on the central gateway ENP sapgw00 activ -
How to let SAP user use SSO to access Application in DMZ?
Hi All,
Our J2EE application is running on a system in DMZ which can not be connected with LDAP. So I am wondering if it's possible to let SAP user use SSO to access our application.
After talking with my colleague I think the only way is to import SSO public key to our WebAS and create user in UME and then assign user to the corresponding public key, but anybody know where to download SSP verification file or is it allowed to download and import into another system at all?
Regards,
BinHi,
Take a look at this example, it uses property nodes to select tha
active plot and then changes the color of that plot.
If you want to make the number of plots dynamic you could use a for
loop and an array of color boxes.
I hope this helps.
Regards,
Juan Carlos
N.I.
Attachments:
Changing_plot_color.vi 38 KB -
Error while scheduling report for SAP users
Hi All,
We have SAP authentication enabled in our BO environment. (BO XI 3.1 sp2 FP 2.6 on windows 2003 server).
There are some webi reports based on BW Bex queries that we are trying to run on behalf of certain SAP end users. This we are doing using "schedule for" option.
Now what is happening here is if the end user has logged in once in BO system ,it runs fine. But in case user has not logged in to BO (using infoview etc.) ,it throws error saying "incomplete logon data" . Also if user changes or reset his password in BW and if he doesn't login to infoview after that ,system throws another error "Name or password incorrect (repeat logon)".
Based on these observation, we are suspecting if BO system uses stored SAP users credentials while scheduling report for them based on their last login.
Would like to mention here that we have checked option "automatically import users".
Please advice if this behavior is normal or we are missing some setting.
Thanks in advance,
ChandraHi All,
Any pointers or suggestions for this issue ??
Is there a setting/option avialable in CMC which could resolve these errors.
Or, user has to login once to infoview in all circumstances to avoid these errors.
Thanks,
Chandra -
Backup message error -SAP system is running or SAP user is connected to dat
Hello ..
when the backup started i got this message error ..before starting the backup, the shell shutdown the sap system but below message was showed
BR0262I Enter database user name[/password]:
BR0055I Start of database backup: bedvugxg.aff 2010-08-08 05.31.48
BR0484I BRBACKUP log file: /oracle/AAA/sapbackup/bedvugxg.aff
BR0477I Oracle pfile /oracle/AAA/102_64/dbs/initAAA.ora created from spfile /oracle/AAA/102_64/dbs/spfileAAA.ora
BR0068E SAP system is running or SAP user is connected to database AAA - database cannot be shut down
BR1025I Please shut down SAP system first or use the 'offline_force' option
BR0056I End of database backup: bedvugxg.aff 2010-08-08 05.31.48
BR0280I BRBACKUP time stamp: 2010-08-08 05.31.49
BR0054I BRBACKUP terminated with errors
[Major] From: "OMNISAP" Time: 08/08/10 05:31:49
BRBACKUP /usr/sap/AAA/SYS/exe/run/brbackup -t offline -d util_file -c -m all -u hpbkup/******* returned 3
i am new on this, what should i review into the db?
Regards and thanks in advance
Dma.Hello Daniela,
you try to perform an offline backup (which is a very uncommon way nowadays) and your SAP system is not down.
This is also described in the official documentation:
http://help.sap.com/saphelp_sm32/helpdata/en/0d/d309664a0c11d182b80000e829fbfe/content.htm
offline: Database backup in offline mode, in other words, the database is shut down during backup. When you select this parameter, BRBACKUP checks that no SAP system users are connected to the database. If an SAP System is active, the database is not shut down and BRBACKUP terminates the process with an error message (message number BR0068E).
Regards
Stefan
Maybe you are looking for
-
Palm Desktop 6.2.2 on Win8.1 syncing but not displaying data
I'm so pleased to have found this forum. I didn't realise there was so much love for old Palm devices. I started with a Palm V and worked my way up to a Tungsten T & palm Desktop 4.1.4 on WInXP and everything has been so good that I've resisted mov
-
Creative Zen 2 Gig displays incorrect album a
My creative Zen 2 G with the current firmware stores incorrect album art for artists that have the same album name such as "Best Of" or "Greatest Hits", The only way around it is to rename all of my greatest hits to something unique such as Rolling S
-
Variable problem in a function module
Hi all, I'm writing a function module FM1 via SE37. Data A type I. Function FM1. perform x. Endfunction. Form x. Endform. The system warned me that variable A has been defined, is that becoz I've defined variable A in another function module within
-
Does anyone know who and how i can talk to someone about my itunes billing?
im trying to find out why im getting billied for something i didnt purchase....
-
I keep getting this error when trying to update to iOS 7 through iTunes, above all i have factory unlocked iPhone and it gets stuck on the iOS 7 activation screen and shows No Service as well, any ideas whats wrong?