Calibration/compensation polynomial - where to apply

Hi. I'm pretty new to LabView so please excuse my inexperience. I calibrated four thermocouples using a reference thermomister and created each a polynomial curve equation to compensate for the error/difference between the four thermocouples and the reference thermomister. How do I apply these polynomials to the program? Is there an article or example available? I tried searching but not getting a lot of luck.Maybe I'm using the wrong keywords?
Thank you in advance.
- Vivian

typically I create an ini text file where all the calibration coefficients are stored.  In my program I read this ini file and place all the values in a cluster that gets passed around in the program to be used.  Another option would be to take the calibration cluster and put it into a global variable.  Now when you read a value from your thermocouple you pull the appropriate calibration values and calculate what the real value is.
As an example:
y = mx + b
m -> slope calibration value
b ->  offset calibration value
You would have to do this calculation for every data point that you want to record.
Hopefully this helps some.

Similar Messages

  • Where to apply credential file for ADS Licens in VA?

    Hi,
       I got a credential file for ADS License to use it in EP.Can any body guide me where to apply this file in Visual Administration and go further in ADS Configuration.
    with regards
    Pradeep.B

    Its not correct producure but u can try these
    Extract the zip file
    Goto -- tools -- internet options -- content -- Certificates -- import -- next --browse ur file -- give password -- now u can see expiry date here
    delete file after checking
    regards
    Krishna.

  • HT201318 i live in Turkey. i want to cancel the storage upgrade that i have purchased only one week ago. i know that in 15 days it is my right to cancel and to get the payment refund. but  i don't know where to apply? i can not contact anywhere via email

    i do not know where/how to apply for cancellation of a recently made storage purchase and get the payback. any help for apple contact information (about icloud) is appreciated.

    You can cancel an iCloud storage upgrade but only within 15 days of buying:
    Apple seem to have made this as difficult as possible. You may be able to do this using http://expresslane.apple.com - Click on 'More products and services', then 'iCloud', 'Account and setup' then 'This topic is not listed'. Explain the situation in the box provided and wait for a response - include a phone number. However you may find you cannot proceed without entering a hardware serial number which is still eligible for AppleCare.
    In that event you will need to phone them directly, using the Apple Online Store number given at the bottom of this page. The first person you speak to may tell you to do it from the iCloud website but this is not possible. Politely insist on escalating the issue to a more senior person and eventually you should be able to get through to someone who can deal with this (you may have to wait for them to call you back) - you will be asked security questions and for part of your credit card number to identify yourself.
    (If it is more than 15 days since you purchased the storage you cannot cancel it for a refund; you can downgrade your plan as from your next renewal date. Please see
    http://help.apple.com/icloud/#mm12eecb08e7 )

  • Compensation Information - Where is selected pernr stored?

    Hi Experts
    In the MSS Compensation Information page, when an employee is selected, where is the pernr of that employee stored?
    Is it in the java memory somewhere?
    Is there a way to read that pernr using a function module?
    I want to add a WD abap iview to the page to need to know how to retrieve the selected pernr?
    Is it possible for the pernr to be passed via parameters?
    How else?
    Thanks in advance
    Anton Kruse

    can you check here
    Parameter Passing from WDJ iview to WDABAP Iview

  • Where to apply java codes?

    Good Day:
    Perhaps this sound funny....I bought a Java book to learn the coding...pretty interesting...but after all, it didn't tell where can I type and test all those codes.
    After much reading, understand that it should be applied onto the JDK. Am I right? so I went to Java site and downloaded it. But nothing happened? I even borrow some other machine to install the JDK, still the same????
    When I check form control panel, the JDK and JRE successfully install. Pls help. After all, I need to start on where can i test my java codes?
    Many thanks for your reply.

    hellbinder, my apology...i guess you and everyone
    confuse with my question.
    Ok, see, what I need is to type in the code as per
    given in the book i bought. I understand that it got
    to be typing in the JDK in order to be able to test
    it out. So I download the JDK (including JRE & IDE)
    and had it install on my pc. Then now, I still could
    find the JDK (what I think/mean the "text editor"
    here) for me to type in the java codes.
    Or shall I re-phare in in suce, let's imagine, if
    given with a stack of words and fonts, we type in
    note pad may be. then now given with the Java codes,
    where shall i type it? JDK right? thus I installed
    JDK but I couldn't find or launch it to type in those
    Java codes?!
    Thanks!You don't "type in the java codes" in your JDK. You use a texteditor to "type in the java codes" and compile "the java codes" with the compiler from your JDK, and after that you run "the java (byte)codes" with the JRE from your JDK.
    Everything is explained step-by-step in the tutorial I posted earlier. Please take the time to follow those steps.

  • Where to apply probe

    I've configured a simple HTTP expect probe
    probe http 1
      description simple_http_test
      interval 2
      faildetect 2
      passdetect interval 2
      passdetect count 2
      receive 5
      expect status 1 555
      open 1
    I then have a server farm with two real webservers.  My question is, where should I apply the probe?  I want it to test each real server and take the server out of service if the probe fails. I've highlted in red a few of the places I've considered (under each rserver, under the serverfarm, or under the rserver defined under the serverfarm).
    rserver host test1
      ip address 10.10.10.1
      probe 1
      inservice
    rserver host test2
      ip address 10.10.10.2
      probe 1
      inservice
    serverfarm host test_servfarm
      probe 1
      rserver test1 80
        probe 1
        inservice
      rserver test2 80
        probe 1
        inservice
    Thanks -Bill

    Hello Bill,
    The theory behind applying a probe at a global level is to catch a general failure of the server to remove it from all serverfarms it is configured under.  I.e. If the server crashed, an ICMP probe would be sufficient for catching a failure and setting the server to a non-operational state under all serverfarms.
    EX:
    rserver host test1
      ip address 10.10.10.1
      probe 1
      inservice
    Applying it at a serverfarm level is standard.  At that level, every rserver configured under the serverfarm is tested using the probe in question.  Generally, you would have a probe that is specific to the service you are sending traffic to under that specific serverfarm.  If any of the servers were to fail the probe test, they would be removed from rotation only from the serverfarm where the probe failed. 
    EX:
    serverfarm host test_servfarm
      probe 1
      rserver test1 80
        inservice
      rserver test2 80
        inservice
    Applying a probe under an rserver within a serverfarm is less commonly used.  You would generally only apply this where you need to test more than 1 type of service for the server in question.  Say you had IIS and MySQL running on 1 server in your serverfarm.  All other servers in the serverfarm only have IIS installed, however, all servers talk to the single server with MySQL.  For all servers, you would want to probe IIS, for the one specific server, you would want to also probe MySQL.  Hence, you would apply a probe at the serverfarm level for IIS and a single probe under the rserver for MySQL.
    serverfarm host test_servfarm
      probe 1
      rserver test1 80
        inservice
      rserver test2 80
        probe 2
    Regards,
    Chris Higgins

  • Where to apply qos

    We have this:
    src/dst---ORtr1---100Mbps---SPRtr---512kbps---Ortr2---T1---Ortr2---src/dst
    Where should we apply qos? We don't have access to SPRtr(service provider) and here is sample config on our router 1 (Ortr1):
    interface FastEthernet0/0
    service-policy output OUR-POLICY
    Class-map voice-signaling
    match access-group 102
    class-map voice-traffic
    match access-group 101
    policy-map OUR-POLICY
    class voice-traffic
    priority 64
    class voice-signaling
    bandwidth 16
    class class-default
    fair-queue
    access-list 101 permit udp any any range 16384 32767
    access-list 102 permit tcp any eq 1720 any
    access-list 102 permit tcp any any eq 1720

    Hi,
    Qos should be applied to ORtr1 FE, ORtr2 512k, ORtr3 (?) T1.
    On ORtr2 and ORtr3 - connected through T1 - you can use f.e. your posted policy.
    The tricky one is ORtr1 and your policy will not work. The underlying reason is: you are configuring queueing and it will only be involved IF the physical interface is overloaded. This means that there should be more than 100 Mbps traffic before your config is involved. Obviously the problem occurs already if there is more than 512k.
    The solution to the problem is called "nested policy". It would look like this taking your initial policy:
    interface FastEthernet0/0
    service-policy output Shape512k
    Class-map voice-signaling
    match access-group 102
    class-map voice-traffic
    match access-group 101
    policy-map OUR-POLICY
    class voice-traffic
    priority 64
    class voice-signaling
    bandwidth 16
    class class-default
    fair-queue
    policy-map Shape512k
    class class-default
    shape 500
    service-policy output OUR-POLICY
    access-list 101 permit udp any any range 16384 32767
    access-list 102 permit tcp any eq 1720 any
    access-list 102 permit tcp any any eq 1720
    The policy Shape512k will only allow 500 kbps to pass through the F0/0 interface. Once this SHAPER is overloaded you apply the policy OUR-POLICY to prioritize voip.
    The idea is never overload your SPRtr interface. Thus you should not shape to 512k exactly to account for OSI layer2 overhead.
    Hope this helps! Please rate all posts.
    Regards, Martin

  • Where to apply XSS patch for ESS?

    Hi experts,
    We are implementing ESS BP 60.2 in our firm.
    For this purpose , we need to apply XSS patches as per SAP note 761266.
    But I couldnt make out where exactly the patch should be applied.
    Should I apply the patch on the ERP side? or EP ?
    I guess it should be on the ERP side itself.
    But can any one confirm it??
    Thanks alot
    Shobin

    Hi sharadha,
    Thanks alot for your reply.
    Here, we have j2ee server installations both for our ERP and EP.But ERP runs on ABAP stack.
    So which is the exact place to apply these patches?
    EP side or the ERP side?
    Thanks alot
    Shobin

  • Best Practice for where to apply ACL's on a router

    I have a 1760 router with a 4 port ethernet card. It has the Vlan1 int on it for f0/0 in the IOS. I need to apply an ACL to that interface/subnet with the phyical cable in f0/0 and ip range of vlan1. When appling the ACL should I apply it to the physical interface or the Vlan (mgt) interface. What is the best practice and is there any docs on this on cisco?
    Thanks
    Chris

    Chris
    The f0/0 is operating as a switch port and as such you can not apply the access list directly to the physical interface. You should apply the access list to the vlan interface.
    HTH
    Rick

  • Where to apply input verifier using netbeans IDE editor

    hello frenz,
    could anyone guide me on how to applying input verifier using netbeans IDE editor?

    You should ask your problem in the netbeans forum or just set the input verifier manually.

  • Adobe Lens Profile Calibration Chart(s) - Where can I download them?

    They must be right under my nose and just can't find them, but I've been all over the web and...?  My printer will do 8.5x11 max so that's the chart I need.

    Yes they are.  The Calibration Charts are PDF files in a “calibration charts” subfolder in the download ZIP/DMG.

  • Where to apply patches

    Hi,
    Recently I have applied 9 patches (hrglobal is one of them) on prodapp1, which is the application node that has admin, conc, forms, and web components . I have tested the new upgrades and everything is working fine.
    Now do i need to apply all the patches again on the secondary application node ( prodapp2) which has the same components as prodapp1? or no need?
    Note: when i tried to apply the first patch on prodapp2, it gave me a message telling me that this patch has been applied before.

    Hi,
    I checked. It's not shared.
    That means i should apply patches on both nodes? All patches or certain types?Yes.
    And as i told you i got the warning message that the patch has been applied before.
    what to do in this case?Maybe this patch was applied before (query AD_BUGS table to verify). However, you can simply re-apply the patch on both nodes and there should be no issues.
    is there a way to compare patch levels in both nodes, to make sure all patches are applied on both?Both nodes are connected to the same database, so querying ad_bugs table should tell if the patch was applied or not. To verify if the patch is applied on all nodes or note, check the version of the files which come with the patch and compare with with what you have on each application tier node.
    Thanks,
    Hussein

  • Where to apply for SAP UA membership status?

    On the website I nowhere find a link to apply as university for SAP UA membership, also information about this topic ist missing.   Greetings   Michael Nagel

    Hi sharadha,
    Thanks alot for your reply.
    Here, we have j2ee server installations both for our ERP and EP.But ERP runs on ABAP stack.
    So which is the exact place to apply these patches?
    EP side or the ERP side?
    Thanks alot
    Shobin

  • Where to apply Unsharp Mask?

    I have multiple image layers and adjustment layers, and after doing all of my editing I would like to sharpen the image. Do I just apply the Unsharp Mask to the top most layer to achieve this OR is there some other way? Will it sharpen the details of all the layers if applied to the highest layer?
    Thanks.

    Guidelines?
    Sharpening is almost the very definition of "season to taste".
    I've seen a lot of publications that I feel tremendously oversharpen photos, making them look like some artificial construct (but like a lot of other similar publications).  A photographer friend and I were once trying to make prints that looked like those in a coffee table picture book, and we were failing for a while until we tried dialing up the Unsharp Mask to ludicrous levels.
    What I suggest you do is to try to get a feel for how what you've done on the screen is going to look as published (e.g., if you make a print, assuming that's what you do).  Then decide on a "look and feel" that you want to express, and try to consistently achieve it with your photos.
    One trick I use is to view an image at exactly 50% to try to get a feel for how sharp it will look in print.
    By the way, depending on what you're after, there are better sharpening tools than Unsharp Mask available.
    -Noel

  • A system to play arround (where to apply tutorial) ???

    Hi,
    I would like to start with a first tutorial to learn more about XI.
    I chosen this tutorial:
    <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/0d/1ee03f41b9eb06e10000000a1550b0/frameset.htm">KW-Tutorial</a>
    The problem is that I do not have enough permission on any system to move on with product creation on SLD. Do you have any XI-System for me to play around?
    After the first tutorial mentioned above I would like to work on this tutorial
    <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/69/4ad13fa69a4921e10000000a1550b0/frameset.htm">Tutorial: Defining an integration process</a>
    Thank you in advance.
    Best regards.
    Erdal

    I think you should ask your SAP Basis team to give you more user rights on your dev or sandbox system.
    There is no "free" XI trial version.
    Regards
    Cornelius

Maybe you are looking for