Call Program from another Program using varient via Selection Screen

I am calling a standard report from my Z Program via Selection screen.
Is there any way to hide the Execute button that is seen when we see the called program selection screen?

Hi Shyam,
Thanks for the quick reply.
But my requirement is to show the selection screen of called program as i need to make some values changes in the selection Screen.
However, the user can accidently click the execute button which i dont want thats why i need to hide the execute button.
My aim is to change values of selection screen but nto execute it.
Is it possible?

Similar Messages

Program using BAPI and selection screens

program to compare two infoobjects using BAPI and selection screen in ABAP

BAPI-step by step procedure
http://www.sapgenie.com/abap/bapi/example.htm
list of all BAPI's
http://www.planetsap.com/LIST_ALL_BAPIs.htm

Problem in Submit via selection screen statement

Dear Experts,
I have designed selection screen and a dialog screen 100. I am passing the selection screen values to dialog screen using Selection screen via selection screen statement. When i tried to change the values in dialog screen, it is not allowing me to do so and the values are not refreshed.
I have searched the SDN Forum, but not able to find the suitable thread.
Regards,
Ramesh Manoharan
Edited by: ramesh.manoharan on Mar 17, 2010 1:03 PM

Hi,
I have used the below statement to pass values the values from selection screen to dialog screen (Created as an Executable program)
Submit <pgm> via selection screen
with ...... .
Dialog screen is created as an executable program where i have created two subscreen area and populating the Selection Screen as subscreen by using the below statement:
selection-screen begin of screen <subscreen no.> as subscreen.
selection-screen end of screen <subscreen no.>.
The problem i am facing is that the values of selection screen are getting populated in the dialog screen. But when i tried to change the input values in the dialog selection screen. I am unable to do that and it is not showing the new entered values. Only the previous values are shown (got from selection screen from Submit via selection screen statement).
Kindly let me know where i am going wrong ? Kindly help me to overcome the problem .
Regards,
Ramesh Manoharan

SUBMIT via selection screen and return gives dump

Hi Guys,
When i have used SUBMIT via SELECTION SCREEN and RETURN, it gave me the selection screen and subsequent report is executed properly without an error and when i pressed back button, it went to selection screen without any issues but the problem is when i press back from the selection screen it gives me a dump. Could you guys think of what would be the probelm.
Thanks in Advance.
Santosh.

Hi Santhosh,
What is the dump u r getting? I tried like this and is working file.
Report1
REPORT Z75694TEST1.
PARAMETERS po_1 TYPE c.
WRITE po_1.
SUBMIT Z75694_TEST VIA SELECTION-SCREEN AND RETURN.
Report2
REPORT Z75694_TEST .
PARAMETERS: po_2 TYPE c.
WRITE po_2.
Thanks,
Vinod.

Call Program from another Program using varient

Hi...
How to call program from program with varient....?
i have used submit but how to pass varient dynamically.
Regards,
Chintan

Hi,
Use the FM SUBMIT_REPORT
OR
SUBMIT <Program Name> VIA SELECTION-SCREEN
USING SELECTION-SET <VARIANT>
AND RETURN.

How to get data from the called program using SUBMIT in a background job?

Hi Experts,
I've a program which creates a background job using JOB_OPEN and JOB_CLOSE function modules.
Between the above function modules I need to call a program using SUBMIT VIA JOB statement.
My problem is, How do I fetch some data in an internal table in the called program to the calling program after the SUBMIT statement?
I tried to EXPORT and IMPORT the data, but they are giving a failed sy-subrc when using this background job.
Kindly let me know your inputs and valuable suggestions.

Kumar,
When we execute a program as a background job then the output will be sent to Spool which needs to be fetched again.I guess we need to use Submit via spool as mentioned by Rajat.
Check these threads to get some idea
submit report to spool & import spool id
Re: Generate Spool for a report
K.Kiran.

How do I install Mac OS from another computer using firewire?

My iMac has a bad CD drive but I was told that there is a way to install Leopard from another computer using a firewire connection between the two. I put the install CD in the other computer and rebooted it using "T" (and I see the floating firewire symbol as expected). But I don't see the install disk on the iMac. What's up?

you can try another way:
connect a firewire drive to the good Mac. Partition the drive and make the second partition as small as you can but at least 8 gigs. Mount he Leopard DVD to desktop. Launch Disk Utility and select that external drive and the restore tab. Drag the source , ie the MacOSX DVD to source window and that second small partition to the destination window. Select restore and enter your password. Wait 30 mins, restore is done. Quit all programs. Unmount that external drive. Connect to the "bad" Mac and restart it from that external drive to install Leopard OSX. You can if you want load most of your software on the first partition of the external and install your software unless of course you did a Time Machine to make it far simpler.

Best way To get data from another application using NDDE lbrary

My vb.net application gets data from another application using NDDE Library. I got stocks prices (open,high,low,close,volume,change......(about 15 records for each stock)) (about 200 stocks) . I don't know if there is a problem in my code.
This is my code:
l : is the list of stocks.
This Sub connects to server and requests the data :
Public Shared Sub GetQuotes()
Try
client1 = New DdeClient(server, topic)
client1.Connect()
For i As Integer = 0 To l.Count - 1
client1.StartAdvise("QO." & l(i).t & ".TAD$last", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$open", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$high", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$low", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$pclose", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$volume", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$date", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$time", 1, True, 60000)
Next
Catch ex As Exception
MsgBox(ex.Message)
End Try
End Sub
and then I get the data from Client_advise sub (called each time a value changed )and fill the list. What I know is that client advise gets only one record for single stock each time is called..
Example: for stock AAPL. 1st time enters client_Advise I get open price for AAPL, 2nd time I get high price for AAPL,3rd time I get low price..... and I update the value in the List (l)
This the client_Advise Sub:
Private Shared Sub client1_Advise(ByVal sender As Object, ByVal e As NDde.Client.DdeAdviseEventArgs) Handles client1.Advise
For q As Integer = 0 To l.Count - 1
If l(q).t = w(1) Then
Dim item() As String = e.Item.Split("$")
If l(q).Open = "#" Then
l(q).Open = "0"
End If
If l(q).hi = "#" Then
l(q).hi = "0"
End If
If l(q).lo = "#" Then
l(q).lo = "0"
End If
If l(q).Close = "" Or l(q).Close = "#" Then
l(q).Close = "0"
End If
If l(q).pclose = "#" Then
l(q).pclose = "0"
End If
If item(1) = "open" Then
l(q).Open = Format(Val(e.Text), "0.00")
ElseIf item(1) = "last" Then
l(q).Close = Format(Val(e.Text), "0.00")
ElseIf item(1) = "high" Then
l(q).hi = Format(Val(e.Text), "0.00")
ElseIf item(1) = "volume" Then
l(q).Volume = Val(e.Text)
ElseIf item(1) = "low" Then
l(q).lo = Format(Val(e.Text), "0.00")
ElseIf item(1) = "pclose" Then
l(q).pclose = Format(Val(e.Text), "0.00")
If l(q).pclose <> "" And l(q).pclose <> "#" And l(q).Close <> "" And l(q).Close <> "#" Then
l(q).c = Format(l(q).Close - l(q).pclose, "0.00")
l(q).cp = Format(((l(q).Close - l(q).pclose) / l(q).pclose) * 100, "0.00")
End If
l(q).flag1 = 2
ElseIf item(1) = "date" Then
l(q).Date1 = e.Text
ElseIf item(1) = "time" Then
l(q).Time = e.Text
End If
Exit For
End If
Next
End Sub
Am I doing something wrong which inreases CPU usage to 80 or 90 % ?
Thanks in advance.

Hi MikeHammadi,
According to your description, you'd like to get data from another app using NDDE library.
When using the NDDE library, the CPU usage is high. As the NDDE library is third-party library, it is not supported here. I suggest you checking if the problem is caused by the NDDE library.
If you'd like to get data from another app. I suggest you could save the data in the dataBase, and then read it in another application if necessary.
If you have any other concern regarding this issue, please feel free to let me know.
Best regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Is it possible to call methods from another class from within an abstract c

Is it possible to call methods from another class from within an abstract class ?

I found an example in teh JDK 131 JFC that may help you. I t is using swing interface and JTable
If you can not use Swing, then you may want to do digging or try out with the idea presented here in example 3
Notice that one should refine the abstract table model and you may want to create a method for something like
public Object getValuesAtRow(int row) { return data[row;}
to give the desired row and leave the method for
getValuesAt alone for getting valued of particaular row and column.
So Once you got the seelcted row index, idxSelctd, from your table
you can get the row or set the row in your table model
public TableExample3() {
JFrame frame = new JFrame("Table");
frame.addWindowListener(new WindowAdapter() {
public void windowClosing(WindowEvent e) {System.exit(0);}});
// Take the dummy data from SwingSet.
final String[] names = {"First Name", "Last Name", "Favorite Color",
"Favorite Number", "Vegetarian"};
final Object[][] data = {
     {"Mark", "Andrews", "Red", new Integer(2), new Boolean(true)},
     {"Tom", "Ball", "Blue", new Integer(99), new Boolean(false)},
     {"Alan", "Chung", "Green", new Integer(838), new Boolean(false)},
     {"Jeff", "Dinkins", "Turquois", new Integer(8), new Boolean(true)},
     {"Amy", "Fowler", "Yellow", new Integer(3), new Boolean(false)},
     {"Brian", "Gerhold", "Green", new Integer(0), new Boolean(false)},
     {"James", "Gosling", "Pink", new Integer(21), new Boolean(false)},
     {"David", "Karlton", "Red", new Integer(1), new Boolean(false)},
     {"Dave", "Kloba", "Yellow", new Integer(14), new Boolean(false)},
     {"Peter", "Korn", "Purple", new Integer(12), new Boolean(false)},
     {"Phil", "Milne", "Purple", new Integer(3), new Boolean(false)},
     {"Dave", "Moore", "Green", new Integer(88), new Boolean(false)},
     {"Hans", "Muller", "Maroon", new Integer(5), new Boolean(false)},
     {"Rick", "Levenson", "Blue", new Integer(2), new Boolean(false)},
     {"Tim", "Prinzing", "Blue", new Integer(22), new Boolean(false)},
     {"Chester", "Rose", "Black", new Integer(0), new Boolean(false)},
     {"Ray", "Ryan", "Gray", new Integer(77), new Boolean(false)},
     {"Georges", "Saab", "Red", new Integer(4), new Boolean(false)},
     {"Willie", "Walker", "Phthalo Blue", new Integer(4), new Boolean(false)},
     {"Kathy", "Walrath", "Blue", new Integer(8), new Boolean(false)},
     {"Arnaud", "Weber", "Green", new Integer(44), new Boolean(false)}
// Create a model of the data.
TableModel dataModel = new AbstractTableModel() {
// These methods always need to be implemented.
public int getColumnCount() { return names.length; }
public int getRowCount() { return data.length;}
public Object getValueAt(int row, int col) {return data[row][col];}
// The default implementations of these methods in
// AbstractTableModel would work, but we can refine them.
public String getColumnName(int column) {return names[column];}
public Class getColumnClass(int col) {return getValueAt(0,col).getClass();}
public boolean isCellEditable(int row, int col) {return (col==4);}
public void setValueAt(Object aValue, int row, int column) {
data[row][column] = aValue;
};

I'm trying to clone a internal hard drive from another mac using a usb connection.

I'm trying to clone a internal hard drive from another mac using a usb connection to an external drive so that I don't lose the file before reinstalling the software but I keep on getting a message:
"Restore Failure
Source volume is read-write and cannot be unmounted, so it can't be block copied."
Any advice on how to make a copy of this internal drive?
Thanks!
....also the internal hard drive i am trying to copying run on a mac os x 10.5 and i'm reinstalling the software because the computer is not starting and only shows a grey folder with a question marks inside.

I've had my Maxtor external OneTouch 250GB for about 18 months now and it hasn't skipped a beat. I have hear of people having their Maxtor drive just up and die but you will probably find that goes for all manufacturers.
By the way, Maxtor is, amongst others, an OEM supplier to Apple.

FETCHING VALUES IN MULTI RECORD BLOCK FROM ANOTHER TABLE USING SELECT STATEMENT.

Hi,
I have one multi record block in which i want to fetch values
(more then one record) from another table using select statement
IN KEY NEXT ITEM.I am getting following error.
ORA-01422: exact fetch returns more than requested number of rows
Thanks in advance.

In your case I see no reason to use non-database block and to try to populate it from a trigger with a query, instead of using the default forms functionality where you can associate the block and the fields with table, create where clause using bind variables and simply use execute_query() build-in to populate the block. The power of the forms is to use their build-in functionality to interact with the database.
Also, you can base your block on a query, not on a table and you dynamically change this query using set_block_property() build-in. You can use any dynamic queries (based on different data sources) and you simply need to control the column's data type, the number of the columns and their aliases. Something like creating inline views as a block data source.
However, you can replace the explicit cursor with implicit one like
go_block('non_db_block_name');
first_record();
FOR v_tab IN (SELECT *
FROM tab
WHERE col_name = :variable)
LOOP
:non_db_block_name.field1 := v_tab.col1;
:non_db_block_name.field2 := v_tab.col2;
next_record();
END LOOP;

HT204350 Incorrect link to "OS X: How to migrate data from another Mac using Mountain Lion and earlier"

Incorrect link to "OS X: How to migrate data from another Mac using Mountain Lion and earlier". Should be http://support.apple.com/kb/HT6025

I think the OP is saying OS X: How to migrate data from another Mac using Mountain Lion and earlier (which should be a link to HT4889) just links back to OS X: How to migrate data from another Mac using Mavericks (HT5872).
It does indeed do that, & HT4889 seems to be MIA.

How to view messages from another iPhone using your apple Id

How to view messages from another iPhone using your apple Id

Sign into iMessage using the same ID (in Settings>Messages>Send & Receive). The other phone should then see your messages too.

Connecting a KM repository from another portal to KM via WebDAV - meda data

Hello there,
we are evaluating the option of connecting a KM repository from another portal to KM via WebDAV in our Federated Portal Scenario (in fact, we wish to get rid of the the remote roles as soon as possible).
This can be accomplised as described here [Connecting a KM repository from another portal to KM via WebDAV|https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/2783].
Or for BI as described in Note 969040 - Federated portal network and Information Broadcasting .
One question : in case meta- data properties are set, where are these stored? In the consumer portal, or in the source system, the producer portal?
I.e when I set properties on documents of the WebDav repository, and I go to the source system, will the same meta- data properties be set there?
Many thanks!

For testing I've integrated the remote KM repository as WebDAV and enabled the properties repository service :
- custom meta- data defined on the source (producer) KM system is not visible in the consumer portal if no value has been set on the source system :
Let's say you have a property 'country' on the source system, define a value for it + save, you can view the property in the consumer system.
- if you define both the same properties in consumer & producser system, you can view the properties in both system, and the value set in either one of the systems is displayed in both of them.
In short : the custom meta-data properties need to be defined on both systems

We have a 5s active on our account. After turning on a previously active 4s (it had the same number) The 5s can no longer place call and when you call it from another phone the 4s rings, but will not pick up. Texting over the cell networks works fine.

We have a 5s active on our account. After turning on a previously active 4s (it had the same number) The 5s can no longer place call and when you call it from another phone the 4s rings, but will not pick up. Texting over the cell networks works fine. Any suggestions??

hens0861,
Hmm, let's ensure this is working as it should be! So what phone should be active on your account? Did you switch the devices online or how to did you activate the 5s? Please share details.
KarenC_VZW
Follow us on Twitter @VZWSupport

Call Program from another Program using varient via Selection Screen

Similar Messages

Maybe you are looking for