Called id between avaya to cucm

Hi guys
need quick assistance here:
i m using cucm manager 9.1.2-11900 and connect threw h323 trunk to avaya ip office
extansion in avaya ip office 7XX
cisco extansion 48XX
what i m try to do is ,when 7xx (avaya) call to 48xx (cisco) i want that the cucm manager will add the prefix 5 to extansion 7xx
so when i recive calls to 48xx from 7xx ,i will c on my phone display 57xx
i try whithout success
tk
shoham

Hello Shoham,
Were you able to resolve the issue?
If not, did you try calling party transformation and then apply it to the the trunk?

Similar Messages

ICM call variables to Avaya

I am looking for anyone who has integrated an AVAYA to ICM and how they transfer call variables between to the two systems and also how they overcome differences in MI between IPCC and AVAYA CHT etc
In the Avaya integration guide you can define what call variables are used and are read/write, but when it comes to transferring data back from the AVAYA you have only call variable 5 to play with or is this reference for guidance only and the default configuration. I want to be able to send from ICM to the AVAYA and potentially onto the turret the customer number and type of call. Is it possible to do this?
Looking forward to your experiences
regards
Mark

Hi Mark,
you should use the UUI in Avaya as you pointed out and the default Call Variables on the ICM side, those variables content could be pushed to other variables and eventually ECCs and then overwritten as you keep updating the informations, same goes from the agent desktop, you could use the appropriate agent controls to update them.
Generally speaking the better method to implement this would vary based on the scenario at hand and the customer requirements, hence why I would recommend having a chat with the Advanced Services group for more specific guidance and a prompt engagement/followup.
Regards,
Riccardo

Agent Reserverd caller hears Dead air after CUCM upgraded to 10.5.2.11005-1

After a recent upgrade on my SME head end cluster from CUCM 9.1.2.11900-12 to 10.5.2.11005-1 I have been having an issue with my call center agents on a leaf cluster running 7.1.5.35900-7 (Cluster 1). This is both enterprise and express agents.
The call comes in on a leaf cluster running CUCM 9.1.2.11900-12 (Cluster 2)
Then goes to a head end SME CUCM 10.5.2.11005-1 cluster via a SIP trunk
Then the calls goes to a CUCM 7.1.5.35900-7 (Cluster 1) leaf cluster via an Inter-Cluster Trunk
The call center agents get put in reserved status but never get the call.
The callers just hear dead air.
The only changes is the upgrade to the head end cluster to 10.5.2.11005-1.
If I add a dial peer on the PSTN gateway CUCM 9.1.2.11900-12 (Cluster 2) leaf cluster so the call goes from gateway to CUCM 7.1.5.35900-7 (Cluster 1) the agent does not have any issues.
My initial thought is a possible change on the trunks from Cluster 2 to SME or SME to Cluster 1.
Anyone have any thoughts on this?

Not sure if this is related since this was a while back and it was on version 8.5 that I noticed this. If I recall there is was an issue with the SME cluster talking to the leaf cluster. If the SIP Trunk was talking to a specific node in the cluster, the intra cluster signaling had some problems. i.e. if you had Sub-A and Sub-B and if the SME Cluster sent the invite to Sub-A while the phone sat on Sub-B, the call wouldn't go through. It had to do with making sure that the Call Manager Group assigned to the device pool that was assigned to trunk had all CCM nodes in the cluster added to it. This became an irritation when I was working on it because we had more than 3 CCM Subscribers and there is a limit of 3 CCM nodes per Call Manager group and we had 4 CCM subs in the cluster which means we would never be able to send calls to a phone in the leaf cluster registered to the 4th node that wasn't part of the CCM Group for the device pool used by the SIP trunk between the Leaf and SME cluster.
You are dealing with 10.5 and you also mention that this was working prior, so I am not sure if this is the same, but I would certainly play around with the CMG for the device pool of the trunk and the CM that the phone registers to.

TS3367 I have two IPhones and one IPad all with the same Apple ID. I can call facetime between the two IPhones, but I cannot call the IPAD from either of the IPhones and when I call my IPhone from the IPad it rings my wife's IPhone after briefly calling m

I have two IPhones and one IPad all with the same Apple ID. I can call facetime between the two IPhones, but I cannot call the IPAD from either of the IPhones and when I call my IPhone from the IPad it rings my wife's IPhone after briefly calling mine.

Each device needs a separate address. Use an email address (gmail.com) on the iPad.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
 Cheers, Tom

Call alternating between earpiece and loudspeaker

I have a Sony Z1The last few days when i answer a call I will start the call using the ear speaker (phone held to ear) however after a while the phone begins to alternate between the ear speaker and the loudspeaker and eventually after about 15 seconds i just have to end the call. I don't know if it was an app update on the phone or my SW3 update that is causing the issue.
I have tried clearing a few apps but that does not seem to have helped.
Now not sure if linked but i have a new set of Sony Bluetooth earphones also that sometimes starts and stops when playing music. I thought it might have beenthe earphone battery going flat but it was doing it also when fully charged.
Anyone had similar? I have seen the post where calls go directly to loudspeaker but i thought this was different.

Started to happen again today however the cache was empty. This time however the call alternated between all the options (earpiece, speaker and headphones). I conducted a factory reset and it still occurred. I am now stuck for answers.
Another issue I am getting at the same time is my wifi disconnects and says ' temporarily avoiding poor signal ' when the signal in the wifi section shows full wifi signal?
UPDATE;
I had been getting notifications in the notification bar that 'Smart Connect' had headset connected when there was definetly no headset connected. During a call it was again alternating between the different options of earpiece, headset and bluetooth. I subsequently uninstalled allupdates for Smart connect, but i still had call issues. I have now disabled smart connect and will wait to see if this solves the issue. I am now hopeful that this is the problem. Next would be to find out if it is a software or hardware issue.

How does the ADF support romote call method between two managed server ?

How does the ADF support romote call method between two managed server ?

You would usually use this as a WebService through the WSDL that is exposed.
JDeveloper can help you create a Java Proxy to call the Web service if you point it to the WSDL file that was generated for your AM.
Some other samples here:
http://www.connotea.org/user/jdeveloper/tag/Service%20Interface

What is the procedure of Call Manager upgrade from version CUCM 7.1 (MCS Server) to version CUCM 10.2 (on UCS server)

Hi
What is the procedure of Call Manager upgrade from version CUCM 7.1 (MCS Server) to version CUCM 10.2 (on UCS server) , please let me know the steps to what would be the backup procedures and upgrades.
Regards
Gaurav

I'd suggest reading this guide to make sure you have prepared your environment to support 10.x first. The link below also contains the upgrade path to 10.0(1).
One of the ways you can do this is:
1/ Apply refresh upgrade cop file on all servers in cluster.
2/ Upgrade the cluster to 8.6(2). Take a backup of the cluster.
3/ Build a cluster of 8.6(2) servers on VMs, and assign them the same hostnames and IP address as the hardware cluster. (You may need to keep these on a separate network until switching off the hardware machines)
4/ Restore the backup taken from the hardware cluster on to the VM cluster.
5/ Upgrade VM cluster to 10.0(1).
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/10_0_1/CUCM_BK_U4214F9D_00_upgrade-guide-cucm-100/CUCM_BK_U4214F9D_00_upgrade-guide-cucm-100_chapter_010.html#CUCM_RF_UA60AFAB_00

Is 3g video call possible between Iphone4 & Nokia E71?

s 3g video call possible between Iphone4 & Nokia E71? Without internet connection, just through local network provider? If yes, how to set-up? Thanks in advance.

Right. That's old firmware. Have you tried updating it?
http://europe.nokia.com/softwareupdate
If no update is available then you most likely have a branded phone:
http://linux.sgms-centre.com/nokiafaq/branded-phones/
If this is the case, pressure your operator for an update.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

CUCM 8.6 call busy between SIP phones and thirdparty phones

Hi Everybody,
I have the following error on my logs:
Invalid Disconnect Cause(cause=47), No Reason Header Appended
14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/getXCiscoViPRFallbackIDAndDTMFKey: Device type 8, Pstn Fallback is not enabled|3,100,63,1.36454459^192.168.0.15^*
14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/getDefCcRegister: Secure status=1, mSrtpPresent=0|3,100,63,1.36454459^192.168.0.15^*
14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/compareAndUpdateMedia: sdpStatus=0, CMEndPointSDP role=1, SIPEndPointSdpRole=2|3,100,63,1.36454459^192.168.0.15^*
14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/getDefCcRegister: Secure status=1, mSrtpPresent=0|3,100,63,1.36454459^192.168.0.15^*
14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/handleSIPUACSessionExpires: isMidCall[0], response[200], method[102]|3,100,63,1.36454459^192.168.0.15^*
14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/parseSessionExpires: refresh_interval[1800], refresher[uas]|3,100,63,1.36454459^192.168.0.15^*
14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/setSIPSessionExpiresTimer: interval[1768] secs|3,100,63,1.36454459^192.168.0.15^*
14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/handleSecureRec: enforce srtp flag: 0, remote end srtp support: 0|3,100,63,1.36454459^192.168.0.15^*
14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/updateCNToCC: identityCngFlag[0x1f], isConnInfoInd[1], ccContactHeader[]|3,100,63,1.36454459^192.168.0.15^*
14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/handleSIPConnectInd: Exit with state = outCall_200Rcvd|3,100,63,1.36454459^192.168.0.15^*
14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/handleSIPConnectInd: Exit with state = outCall_200Rcvd|3,100,63,1.36454459^192.168.0.15^*
14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/setSIPUpdateFlags: mIsUpdateForSignalingAllowed = 1 mIsUpdateForMediaAllowed = 1 mPendingOutgoingUpdate = 0|3,100,63,1.36454459^192.168.0.15^*
14:46:50.098 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/appendReasonHdr: appendReasonHdr - Invalid Disconnect Cause(cause=47), No Reason Header Appended|3,100,63,1.36454459^192.168.0.15^*
14:46:50.098 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/addTransparencyInfo: attaching transparency object|3,100,63,1.36454459^192.168.0.15^*
14:46:50.098 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/appendRPIDHdrForOriginalCalledParty: SIP device does not Support Orig Dialled Phone nego: 0|3,100,63,1.36454459^192.168.0.15^*
14:46:50.098 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/getDefAe: SIPCdpc=281707, nodeId=3, processNumber=73 ci=144600614, branch=0|3,100,63,1.36454459^192.168.0.15^*
14:46:50.098 |MRM::waiting_MrmDeallocateMtpResourceReq- Deallocate received for CI=53993831 count=0|3,100,63,1.36454459^192.168.0.15^*
14:46:50.098 |MRM::waiting_DeallocateMtpResourceReq- ERROR Deallocate received for an unknown Call Identifier Ci = 53993831|3,100,63,1.36454459^192.168.0.15^*
14:46:50.098 |//SIP/SIPHandler/ccbId=0/scbId=0/sip_stop_timer: type=SIP_TIMER_DISCONNECT value=500 retries=10|3,100,63,1.36454459^192.168.0.15^*
14:46:50.098 |//SIP/SIPHandler/ccbId=0/scbId=0/sip_start_timer: type=SIP_TIMER_DISCONNECT value=500 retries=10|3,100,63,1.36454459^192.168.0.15^*
14:46:50.098 |//SIP/SIPUdp/wait_SdlSPISignal: Outgoing SIP UDP message to 192.168.0.15:[5060]:
the calling number is 34967850938
the callied number is 19026

Julien,
Please use the link be low to collect cucm traces and use the advanced editor on the forum (located on top right hand corner of the discussion widnow) to attach the trace
https://supportforums.cisco.com/docs/DOC-29901
Ensure you collect the trace from the folowing
1. the server that the phone is registered to
2. If this server is different from the server in the cucm group of the sip trunk, then you need to also collect traces from the server (s) in the cucm group assiged to the sip trunk that connects to the 3rd party cluster...
NB: If you have three servers in the cucm group of the sip trunk, you have to collect the trace from all three servers. This is because calls are dsitributed in a round robin fashion to servers in a sip trunk...
FInally before you send the trace over, please ensure the calling and called numbers are present. Also include the time of the test call
Please rate all useful posts
"opportunity is a haughty goddess who waste no time with those who are unprepared"

Unity UM 'unidentified caller' problem between Unity servers

Team,
We are simulating a clients UM setup using Unity 4.0(5) befor we migrate everything to Unity 7.0(2) and CUCM 7.1(3).
We setup 2 Unity servers in different locations in one AD domain. Each location also has its own Exchange 2003 servers which the Unity servers are pointing to as its message store. We are also integrating with one CCM cluster 4.1(3). VMO is also enabled on users Outlook.
Sending voicemail messages between users within the Unity servers works fine. Users are able to see the sendees name on the email message and Live reply is functioning.
However, sending voicemail messages accross Unity servers have some issues. Users are seeing the messages as coming from the Unity server itself and not from the user who sent it. The email header would like this:
     From:      Unity Messaging System - [server-name]
     To:          [user-name]
     Subject:     Message from an unidentified caller ([caller-extn-number])
The media message would play just fine. But live reply is not possible.
Using the Call Viewer, the number being displayed are correct while the call is in progress.
Did some checking using CUDLE and both Unity servers have all the subscribers extensions on DTMFAccessID table and on the GlobalSubscriber table all the users from both Unity are there.
Anybody from the forum have encountered this before?
Appreciate it if somebody can share some thoughts on how to solve this problem.
Thanks and kind regards,
Neil

Have you configured digital networking between the 2 Unity systems? To me, what you are describing makes sense. You have 2 separate systems. Unity knows about items that belong or are associated to it (i.e., your intra-system communication works as desired). But, it does not know about information (other than calling info) related to the separate system. My first suggestion would be to read up on digital networking - doesn't require any additional licensing as it's Unity to Unity...in other words, VPIM isn't a concern here.

Can we have call conference using G729 in CUCM 8.0.3

Hi,
whether cucm 8.0.3 support conference when codec is g.729.In earlier versions of CUCM I know that conference is supported only in G.711 codec.
If it is not supported in 8.0.3 , whether we have an alternate solution.
Scenario.
This is a contact centre setup using CVP version 8.0 ,UCM version8.0.
Agent wants conference call between IVR and customer. The agent is in remote location from server connected through WAN..All servers incuding CUCM are located in same location . We use g.729 codec across WAN

The SW CFB from CUCM only supports G711 in ANY CUCM version.
Your options are either a HW CFB, XCODER or switch all to G711.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk

Offnet or Onnet between avaya pbx and cisco Cm

guys, can this be done, with this type of intergration can the different vendor phone systems (avaya) and ?(cisco cm) differientiate between onnet and offnet between each other ??? cisco internal phone calls avaya phone , avaya needs to see this as internal !! and vis versa

In the later versions of CCM you can specify the call type by route pattern. Not sure if thsi is what you are looking for...
Mike

Call in progress when one CUCM go down

Hi everybody
We have two CUCM 8.6 and we need to poweroff one of these to change a parts in the UCS server. I know that the phone who's registered with the one I will power off will just "blink" and change to the other CUCM. But I don't know if the phone registered with the one I will power off, if they had a call in progress, did the call will be dropped or will stay in progress?
The answer will guide me to fix a maintenance Windows if it need to be.
Thanks

Hi There,
The calls should be maintained
Table 11-1 Call Preservation Scenarios
Scenario
Call Preservation Handling
Cisco Unified Communications Manager fails.
A Cisco Unified Communications Manager failure causes the call-processing function for all calls that were set up through the failed Cisco Unified Communications Manager to be lost.
The affected devices recognize that their current Cisco Unified Communications Manager failed. Similarly, the other Cisco Unified Communications Managers in the cluster detect the Cisco Unified Communications Manager failure.
Cisco Unified Communications Manager maintains affected active calls until the end user hangs up or until the devices can determine that the media connection has been released. Users cannot invoke any call-processing features for calls that are maintained as a result of this failure.
Communication failure occurs between Cisco Unified Communications Manager and device.
When communication fails between a device and the Cisco Unified Communications Manager that controls it, the device recognizes the failure and maintains active connections. The Cisco Unified Communications Manager recognizes the communication failure and clears call-processing entities that are associated with calls in the device where communication was lost.
The Cisco Unified Communications Managers still maintain control of the surviving devices that are associated with the affected calls. Cisco Unified Communications Manager maintains affected active calls until the end user hangs up or until the devices can determine that the media connection has been released. Users cannot invoke any call-processing features for calls that are maintained as a result of this failure.
Device failure
(Phone, gateway, conference bridge, transcoder, MTP)
When a device fails, the connections that exist through the device stop streaming media. The active Cisco Unified Communications Manager recognizes the device failure and clears call-processing entities that are associated with calls in the failed device.
The Cisco Unified Communications Managers maintain control of the surviving devices that are associated with the affected calls. Cisco Unified Communications Manager maintains the active connections (calls) that are associated with the surviving devices until the surviving end users hang up or until the surviving devices can determine that the media connection has been released.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_0_1/ccmsys/accm-801-cm/a02dvsup.html#wp1021885
Cheers!
Rob

Excel activex call changes between Office 2000 and Office XP. How does one manage that?

I have several Active X calls from within a VI. One in particular is
the Excel Cell Value property node in Office 2000. MS has decided to
call it Excel Cell Value2 in Office XP.
I have built and exe on a machine with Office 2000 and can run the code
on a machine with Office XP, but I can not build on the machine with
Office XP. I can also run a VI with that call
on the Office XP box, but if I mass compile the VI I get the broken arrow.
I guess I am confuesed as to why it can run but not compile. If the
ActiveX call is not there for the compile why is it there for the run?
If I can expect this does it work in reverse where I
build on an Office XP box and run on a Office 2000 box?

These problems you are experiencing do stem from the ActiveX changes between Excel versions. When you mass compile LabVIEW checks to see if everything is linked correctly, including ActiveX portions of your code. Since there are slight changes the LabVIEW compiler detects something is wrong, but cannot isolate the problem. You might need to force a recompile of that VI. Check out this link.
http://digital.ni.com/public.nsf/websearch/50D06DEE8B9DC018862565A0006742F2?OpenDocument
Hope this helps!
Andy F.
National Instruments

Call Together between 2 PAP2T

Please hep me. I like to make a call between 2 PAP2T. One is in VN and another one is in Canada . How can I do it ? If can,please send your help to my email [email protected]
Thank you.

In order to use the adapter you need to connect to a server. The server is usually provided by your VoIP provider. If you do not have a voip provider then you need to sign up with one. So does the other person.
Think about it like this. You have the telephone and the phone jack. But until you get phone service from the phone company, you can't make or receive phone calls.

Called id between avaya to cucm

Similar Messages

Maybe you are looking for