Caller 70 and 30

hai ,
can any body explain for caller 70 and 30 .....
how to solve them
with regards...
Raghu...........

Hi Raghu,
These errors mayl occur due to .
1. Time out
2. RFC
3. Idoc
4. Dead locks
http://sapfan2007.blogspot.com/2007/12/caller-70-missing-error.html
Re: Data load failed - memory issue - caller 70
Caller 70 is missing error
caller 70 and 30
caller 70
caller 70
https://websmp108.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=631668&_NLANG=E
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=967379&nlang=EN&smpsrv=https%3a%2f%2fwebsmp108%2esap-ag%2ede
Regards,
Vijay.

Similar Messages

Why my iphone 5s voice mail answer call first and my iphone second.

why my iphone 5s voice mail answer call first and my iphone second.

Hello celazopdef,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning cellular issues:
iPhone: Troubleshooting issues making or receiving calls
http://support.apple.com/kb/TS3406
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Trying to login to software program known as hamspher (vip simulated ham radio, it downloaded the program but it will not allow me to login with call sign and pin. it has to be opened with what they call a jar file. how do i do this?

trying to login to software program known as hamspher (vip simulated ham radio, it downloaded the program but it will not allow me to login with call sign and pin. it has to be opened with what they call a jar file. how do i do this?

This is compatible with Mac? Especially Snow Leopard (if that is what you'e running)?
Have you considered posting your question in their forums?
Here is some information re. the jar file:
http://ostermiller.org/opening_jar_files.html

My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

Hello SamSax
Check out the assist page below for troubleshooting call connectivity.
Calls and connection issues
http://www.apple.com/support/iphone/assistant/calls/
Thanks for using Apple Support Communities.
Regards,
-Norm G.

I keep getting calls from a block caller id and it's some dude speaking arabian what do i do? How do i stop this?

I keep getting calls from a block caller id and it's some dude speaking arabian what do i do? How do i stop this?

Stop answering calls with blocked numbers. If it's someone who really wants to talk to you, they'll leave you a message and you can call them back.

HT4623 my iPhone can call out and receive text messages and emails but is not receiving any incoming calls

my Iphone can call ut and receive text/email messages but is not receiving incoming calls. What is your thought?

Hi Baileyfour,
Welcome to the Support Communities!
The articles below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
There are two places where vibrations can be set.
One is the Settings > Sounds
The other area is Settings > Notifications
If you have an app set to Alert, it may have a vibration set for it.
iOS: Understanding Notifications
http://support.apple.com/kb/ht3576
Information about Notifications settings can also be found in the iPhone User Guide (pages 131, 132)
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
I hope this information helps ....
Have a great day!
- Judy

I've been using Ringtone Maker to add ringtones to my iPhone. The app is now telling me my music I bought from the iTunes store is not exportable. I downloaded a new app called Ringer and it says my song "has no audio tracks". What am I doing wrong?

I've been using Ringtone Maker to add ringtones to my iPhone. The app is now telling me my music I bought from the iTunes store is not exportable. I downloaded a new app called Ringer and it says my song "has no audio tracks". Wha am I doing wrong??

never mind. i think it just makes you review the information -- it looks like you have to click through everything.

Cisco Jabber windows call option and user addition issue

Hi,
After uploading the jabber-config.xml (EDI-BDI) on the CUCM, the call option for new user contacts started appearing but the already existing contacts in Jabber client have still no call option. Also when we add new contacts to the Jabber client, it just disappears as such. Any one faced similar issue before. Below are the details and attached jabber-config.xml and LDAP profile snap.
We are using employeeNumber as attribute in LDAP configuration.
CUCM - 8.5.1.15900-4
UCCX - 8.6.3.10000-20
Jabber for windows - 9.7.0 (Tried with earlier version of jabber as well)

Hey
Just right click on the contacts which do not have the call option and select view profile, then see if those contacts that are added are they from the Outlook or the AD, if its AD then they will have a contact number and as such they will have the Call Option enabled.
If they are from outlook then delete the users and readd them by checking the view profile option to verify they are being pulled from AD.
Also if i assumed the issue differently then what it is please explain the whole scenario.
Note-: In case of J4W it will not connect to the directory using the LDAP profile info, it automatically verified and cnnects to the domain using your login creds.

I have a new Mac Mini and I found AdWare called TakeOverSearchAssetsMac and SearchProjects on it. I have been unable to remove it. Does anyone have any ideas on how to remedy this?

I have a new Mac Mini and I found AdWare called TakeOverSearchAssetsMac and SearchProjects on it. I have been unable to remove it. Does anyone have any ideas on how to remedy this?

Please review the options below to determine which method is best to remove the Adware installed on your computer.
The Easy, safe, effective method:
http://www.adwaremedic.com/index.php
If you are comfortable doing manual file removals use the somewhat more difficult method:
http://support.apple.com/en-us/HT203987
Also read the articles below to be more prepared for the next time there is an issue on your computer.
https://discussions.apple.com/docs/DOC-7471
https://discussions.apple.com/docs/DOC-8071

Everything on my macbook 5.1 was erased and then the person who erased it could not find start up disc to reinstall. i called apple and gave them the serial number and they sent me leopard os 10.5 which is what originally came with the computer. not work

i was given a macbook 5.1 by my mom, being nice, she erased everything on it, but then could not find the original start up disc. i called apple and had the serial number and said that leopard 10.5 was the operating system that orginally came with it, so i bought it. when i got it,i turned on computer, put in dvd, and immediately shut it off, then turned it back on while pressing letter c. (they told me to do this) i can hear the disc turning but alls i get is blank screen then it shuts down, and restarts. nothing ever shows up on the screen. did i get a wrong disc? should there be something different than just the mac os x leopard 10.5 to get this computer to work again?? thanks for your help!

It means what it says. The "computer person" formatted it wrongly/ unsuitably. it needs to be formatted again.
Error "Case-sensitive drives not supported" or similar install error | Mac OS
Mylenium

I have just bought my iphone 4S 32GB from three weeks ago and 'am facing a problem that in the middle of my calls it suddenly says call failed and it keeps on doing it every call i make

I have just bought my iphone 4S 32GB from three weeks ago and 'am facing a problem that in the middle of my calls it suddenly says call failed and it keeps on doing it every call i make .. I Don't know what to DO Please anyone help me i've got OS 5.0.1 and it's factory unlocked i've boughted from USA and it was sent to me where 'am living now in Egypt ...ANy Helpppppppppp Pleasee

try general>settings>reset>reset all settings and start up as an new phone.

Two subjects one is be aware of (855)999-9115 calling you and how can i secure my mac or my Netgear Box

Two subjects here:
1: I got a call from this phone number telling me this is so and so from Netgear , (855)999-9115 .The reason i am calling you is we detected that someone had hacked your Netgear Router and he told me to type in the Google search bar logmein123.com , So i did so and then he told me to type 5 or 6 numbers so he can go inn to my computer to repare it (All this over my cell phone) Not sure how he got it or he was the original to hack my system and get all my infor from my Two Iphones,Macbook Pro ,Ipad Air and my Imac .
So he start doing not sure what put me on hold each time and then he pops up a page higlighting a name by Midnight Gracie a few times that she or he had hacked your system and he will remove it for free.I trusted him since Netgear is a respectful company , Aftey 32 minutes he tells me i spoke to my supervisor and you pay one time lifetime fee of $399.00 charged to your credit card ,I said no way cant ,Then put me on hold again , came back said ok my supervisor said $299.00 to make story short he siad ok you are over 65 years old special price $49.00 and i will fix your system.Then i said no so he started loging out of my system but in the 32 minutes or more what did he do to my computer ?
The guy sunded as a Philipino . Two guys after this scam since when he called me first i was driving and asked me to be called back , But when i got home i called him and the other guy asnwerd the phone and said ok the Technician that called you is here and talk to him,It it was Netgear how would you knopw who called.
This namber is a big scam , Many people got screwed paid money and wrote reviews on Yelp and other places that thye where great fixed there computer and so helpfull.
I filed a complaint at the Internet FBI and other place that i called forgot there names they take complaints for internet fraud .
BE AWARE NOT TO GET THROUGH THIS , REPORT THEM SO THEY GO TO JAIL ASAP.
2:
How can i protect my systems at home?
I went changed my users name and passwrod on my router and all my computers. But if he got in to my system who can i be sure that he will not get inn to it again since he had all my info and ny IP#.
Please tey to help .
Best regards
Sam

1. I'd backup all of my personal data (only) and perform a clean install of OSX if I experienced your problem as no one here or elsewhere could guarantee your machine is free from compromise after that scenario. You should also change your Apple ID password if you haven't done this already.
2. Ultimately trust no one other than yourself even though this is difficult if not impossible in the real world. There are measures you can take however which will lessen your chances of being compromised. Here's a link to one of the most concise write-ups I've ever read on basic computer security essentials by ASC contributer Linc Davis for the average person (scroll to Linc's reply at the bottom of this linked page):
https://discussions.apple.com/message/21065409#21065409

Cannot Turn On iPhone Cellular Calls - FaceTime and iCloud must be signed in to the same Apple ID to use iPhone Cellular Calls.

Cannot Turn On iPhone Cellular Calls - FaceTime and iCloud must be signed in to the same Apple ID to use iPhone Cellular Calls.
I *AM* signed into Facetime and iCloud using the same Apple ID. Why am I receiving this error all of a sudden? I make calls using my Mac and need this feature. I have tried disabling and re-enabling both over a dozen times. TRUST ME, it is NOT user error -- it is Apple releasing features before they are fully ready error!

I'm pretty sure we can clarify whether or not we are on a Public Beta or not, despite NDA........
From the FAQ: https://appleseed.apple.com/sp/betaprogram/faq
Quote:
Is the public beta software I am installing confidential?
Yes, the public beta software is Apple confidential information. For example, don’t install the public beta software on any systems you don't directly control or that you share with others. Don’t blog, post screen shots, tweet, or publicly post information about the public beta software, and don't discuss the public beta software with or demonstrate it to others who are not in the Apple Beta Software Program. If Apple has publicly disclosed technical information about the public beta software, it is no longer considered confidential. Read our Terms for full details

Is there an APP to monitor call usage and number of texts sent

Is there an APP to monitor call usage (in minutes) and number of texts sent etc so I can ensure I am keeping within my contract? I am getting my 3GS on Thursday so do not know if the phone has this facility already inbuilt or whether there is an app I can buy to do this for me?
Thank you for any help and info to answer my question.

Unless O2 has an app available via the iTunes app store that provides for this as AT&T does for the iPhone sold in the U.S., I don't believe so.
The iPhone includes a usage indicator for Call Time and Cellular Network Data usage, which can be reset on a monthly basis based on your billing cycle, but there is no usage indicator for the number of messages sent or received.

I can not get my itunes to recognize my ipod touch, I called support and when i found out there was a charge I politely said no thanks and hung up. now I can't even get the itunes to download!!

I have tried since Chrismas to use my Ipod touch and have not been able to! I have uninstalled and reinstalled itunes more often then I care to admit! I called support and when I found out there is a charge ($59.95) I declined and hung up. I now can't even download itunes! I guess I find that a little fishy. I was so happy with this gift and now I am so frustrated I am about to return it and never purchase another apple product again! I have gotten nothing but the run around when trying to get assistance for a very expensive music player! HELP PLEASE

Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

How to create bdc for fbs1 using both call transaction and session

Hi Friends,
i have one problem with tcode FBS1, i need to create a bdc program for both call transaction and session method using subroutine.
first call transaction needs to execute if there is an error sesion has to execute. if u have code please forward.
thanks in advance.
chandramouli pothugunta

where as in call transaction we can do error handling explictly.those errors are stored in one file .this file will send to the error log(session method),i.e session log.
in the above case we use both call transaction n session method at time in one program.sample code is below ,go through it .
data : begin of itxk01 occurs 0,
end of itxk01.
data : bdcdata like itbdcdata occurs 0 with header line.
data : itbdcmsgcoll like itbdcmsgcoll occurs 0 with header line,
itxk01 like itxk01-dup occurs 0 with header line.
call gui-upload.
loop at itxk01.
refresh itxk01.
perform bdc-dynpr0 using 'prg' 'scr'
perform bdc-dynfld using fnam fval
call transaction 'xk01' using bdcdata mode 'a' update 's' messages into itbdcmsgcoll.
if sy-subrc ne 0.
append itxk01 into itxk01-dup.
endif.
endloop.
if not itxk01-dup[] is initial.
refresh itck01.
call bdc_open_group
itxk01 = itxk01-dup.
loop at itxk01.
refresh itxk01.
perform bdc-dynpr0 using 'prg' 'scr'
perform bdc-dynfld using fnam fval
call bdc-insert.
endloop.
call bdc-close-group.
form bdc-dynpr0 using pr sc
endform .
form bdc-field using fnam faval
endform.
this will help u.
reward points for me
kiran

Caller 70 and 30

Similar Messages

Maybe you are looking for