How to quickly pick up a 2nd call and drop the first call

If I am on a phone call, and then a second call comes in, then how can I quickly pick up the second call and DROP the first call? I can do it if I put the first call on hold but then I have two calls going. If I simply END the first call, then it takes 5 or 6 seconds for the second call to come in. Several times I have lost the second call because it took too long to transition over.

never mind i did a direct chat with a skype rep and got my answer which is no.

Similar Messages

Verizon's iPhone 4S is dropping the first call almost all the time?

Hi.
I have a verizon iPhone 4S.
Everytime I make the first call to someone, I don't hear anything.
When I end that call and try calling again, it works.
This has been happening almost all the time.
I tried letting the phone app turned on but it doesn't solve the problem.
I'm not sure if other carrier's iPhones are having this problem.
Does anyone know what the problem is to this?
Thank you very much.

I tried letting the phone app turned on but it doesn't solve the problem.
What does that mean?
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
If still a problem, restore.
If still a problem, take it in to Apple for a warranty replacement.
IMO, you'll probably end up taking it in to Apple but the other steps are worth trying.

CME - Second Call Drop the first call

Greetings,
Anyone ever seen something like this?
I get a call on my extension, and when I receive a call on another phone, the first call (in my Phone) drops.

I'm seeing this also with IPC softphone version 8.6.
Has anyone resolved this issue?

My 4S iphone keeps trying to turn off during phone calls and drops the calls. Sometimes I have to call back 3-4 times to finish a conversation.

While talking on my iphone, the phone tries to turn itself off. Not just once, but continuous, and not just dropping the call, but actually tries to turn itself off.

Well, then I'm glad this is most probably not a hardware issue - at least not an exceptional, maybe defect of all? -. This seems to be a good idea, because 2G will nearly everywhere available, so phone calls are not likely to drop at all. I'm just a bit confused, because they promised intelligent switch even during calls. For me that means that if the better, faster connection is available, then it uses that, and if it wouldn't be, then it switches to the slower one.
Anyways, thanks for your reply. I guess it's a "just get used to it" issue.

My Skype crashes whenever I make the first call/re...

My Skipe crashes whenever I make the first call or receive the first call. Whether it be by skype to phone or from skype to skype.
I have to sign out from skype and then sign in again for every call I want to make.
Solved!
Go to Solution.
Attachments:
DxDiag.zip ‏15 KB

Please, run the DirectX diagnostics tool.
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

IPhone 4s call waiting; how do I get back to the first call?

When I'm on a call and a second call comes in I tap "hold current call and answer." I get connected to the second call and the first call is put on hold. But when I am done with the second call, how do I get back to the first call? I can't find any way to get back to the call that is on hold. I usually end up hanging up on both calls. Not good.
Also, how do I switch back and forth between two calls? How do I put the second call on hold, go back to the first call to tell that person I must call them back, then return to the second call?

http://support.apple.com/kb/TA38607?viewlocale=en_US
Good Luck

Cannot pick up calls on wait, Cannot make a second call holding the first call

I have a really weird problem with my iPhone 5S. (iOS 7.1)
1. When I am on a call, I am not able to pick up a second call that is on wait. I can see the second call, I can hear the beep sounds but as soon as I pick up, the call freezes in 00.00 time, and My first caller is still active, not on hold.
2. When I am on a call, I am not able to make a second call placing the first call on hold. The second call disconnects immediately with 3 beeps.
3. I am able to see the incoming calls on wait, when I am already on a call. I am able to hear the beeps coming in. SO it means the call waiting is on (Tried turning it on/off/on too.) But when I pick up the call, the above problem comes in.
What have I tried to solve this: (None of them helped)
1. I tried a hard reset of my iPhone (Holding Power and Home button)
2. I tried toggling the Call waiting button
3. I tried resetting network settings.
4. I called my Operator for assistance. I am using Airtel, India. They told me to dial this code - *43# . I tried it and it gave me this screen. But the problem is not solved yet.
Is there anybody here who is facing the same issue with your iPhone? I never had this problem with my iPhone 4.

Make sure you do not have "Do Not Disturb" turned on. This feature will block the first call, but is someone calls right back it will be put through.
On the iPhone, go to Settings/Do Not Disturb
Make sure you do not have Do Not Disturb turned on manual or scheduled.

How to interrupt an funtion call and continue the followed code?

for example, the code:
public class A{
public static void main(String[] args){
int i = 0;
method1();
system.out.println("exit");
public void method1(){
int j = 0;
while(true){
j +=1;
there is a error in method1(), so the call the method1( ) in main() will make an error.
how can i interrupt this funtion call and continue the followed code?

in actually, I can not control the method1(), that's
an remote object function.
So I can not add exception in methoes().Then in your main method catch whatever "Error" your method1 is throwing.

Since you don't allow emails any more – I suspect because of the numerous complaints with your service and the way you treat people that you don't want documented, I am calling and I want this call recorded for future reference. I have been a long time fa

Since you don’t allow emails any more – I suspect because of the numerous complaints with your service and the way you treat people that you don’t want documented, I am calling and I want this call recorded for future reference.
I have been a long time faithful customer of vzw and although the past year I have been late on payments many times and really couldn’t afford your exorbitant prices for services lots of other companies offer sometimes three times cheaper than what you charge, I have hung in there trying my best to meet my obligations.
This month has been no exception. You don’t know the background; the whole story of people’s lives. I know you could care less because all you care about is the profit-the money that comes in.
I was told when I agreed to pay my bill on the third per the recorded message that I had 14 days to pay…you cut me off anyway. The phones are not the tissue; your suspending my service means I cannot work. I may lose my job…how do you justify that? In any case? The least you could do would be to keep 4986 on and cut the phones off. But no. You refuse to compromise and meet the basic needs of your customer. What does that say about your company? I tried to call back on three separate occasions to tell you I couldn’t pay because of unexpected expenses but couldn’t get out of the automated system…sadly couldn’t get to a real person which also speaks volumes to me.
All this tells me this is a company I don’t wish to be affiliated with any more. As soon as I can, I will discontinue service with you…I know you could care less. I will honor the remaining portion of the contract but that’s it. You don’t deserve my business. I am a good, hardworking person who, at the sacrifice of myself and my needs, always pays her bills…albeit late at times. I realize others tell you stories and lies to justify themselves. That’s not me. If you knew what I had been through the last 7 yrs you would marvel that I am still on my feet…don’t judge too quickly. You could be wrong…and in my eyes you are by doing this to me.
God will see us through this extremely scary time of that I have no doubt. No thanks to your company and lack of understanding and mercy. I am doing the best I can. Sadly you are not.
See I have choices. MANY choices of providers for services you offer. I don’t have to be treated like this. I don’t have to succumb to your coldness and callousness. I intend to choose better (and cheaper). If your company doesn’t get the “people factor” back you will be sorry.

Problem here is you admit you cannot afford the service.
And you want to blame Verizon for losing a job because you have no cell phone.
If your job depends on that phone I would pay it on time every time if you need a job to pay your bill.
No other service is going to treat you any different. And if you cannot afford Verizon's monthly invoice how are you going to afford new devices, activation fees, possible security deposits on any other cellular carrier? You can't.
Also if you made an arraignment to pay and then decide you cannot do so, why should Verizon extend you service or credit, or why is it you want to use the service and data and not pay for it as agreed.
Get a prepay phone. Its evident the cost is too high for you to afford on post pay.
Good Luck

Skype Windows client hangs for the first call - co...

Hi,
Skype on my Windows 8.1 (depending on its mood) hangs for the first call. It will keep ringing and ringing till it times out, during that time I am not able to hang up the call as well, the red hang up button doesnt work and we have to let the call go on till it drops on its own. Then on the second try it connects perfectly fine. This happens most of the times, there are only a few days where it connects on the first try otherwise its always the 2nd time.
Please let me know what could be the possible solution for this one?
Thanks

Hi Marcin,
This forum is mainly for talk about the product use related issue and not the best place to talk about the develop issue, for the develop issue we can post in MSDN forum for
the further help and your issue may need capture a dump then for the further analysis it is not an efficient way to work in this community since we may need more resources which is not appropriate to handle in the community. I‘d like to suggest that you submit
a service request to MS Professional tech support service so that a dedicated Support Professional can further assist with this request.
MSDN forum
https://social.msdn.microsoft.com/Forums/en-US/home
Please visit the below link to see the various paid support options that are available to better meet your needs.
http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
Thanks for your understanding and support.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Calling a transaction and skipping the first screen

Dear forumers,
In my report program, I will need to call a custom transaction with skipping the first screen.
And, this custom transaction is created from a query.
Currently, the codes look like below:-
        SET PARAMETER ID: 'BUK' FIELD w_output-bukrs,
                          'AN1' FIELD w_output-anln1.
        CALL TRANSACTION 'ZCUSTQ' AND SKIP FIRST SCREEN.
Everything works perfectly alright except for one thing: The first screen is not skipped. When the custom transaction is called, the first screen is still displayed to the user.
Additionally, I also found out that the "SKIP FIRST SCREEN" does not work because the screen's next screen number is the same. This means the screen 1000's next screen is 1000 as well.
(See notes in italics below)
Does anyone have any ideas on how to resolve this? Please help.
This addition suppresses the display of a screen of the initial dynpro of a called dialog transaction. The addition AND SKIP FIRST SCREEN suppresses the first screen under these prerequisites:
For the initial dynpro, in the Screen Painter the own dynpro number must not be specified as the next screen number.
All mandatory input fields of the initial dynpro must be filled completely and with the correct values by the SPA/GPA parameters
If these prerequisites are met, that screen of the dynpro is displayed that is specified in the Screen Painter as the next dynpro of the initial dynpro.

For Any Query , if you want to create the Transaction you need to use the Tcode START_REPORT
in general it will skip the first Transaction codes selection screen , Not your query reports selection screen.
I checked and verfied...
Steps to verify the issue..
1.Go to SE93 ,Now you will go for parametric transaction.
2. give the Transaction as START_REPORT, there you will have option Skip Initial Screen. You uncheck that.
3. Now give all information related to your query.
and see the effect
call TRANSACTION 'YYTCODE AND SKIP FIRST SCREEN.
This will always trying to skip the First transaction's selection/initial screen , Not your Query selection screen.
You also try to check and let me know.

Severe Call Problems (drops, bricks, ghost calls)

Had the original since soon after it came out and had virtually no problems. Just bought the 3G Black 3G version last night. Several major problems right out of the gate:
1. During a call the touch screen blacks out (call is still live). If one requires the touch pad interface to get through a customer service maze, for example, the phone is useless. Has happened twice but is not foolproof repeatable.
2. During a call, another random call from my contacts will be initiated and place the current call on hold, AND the touch screen blacks out. The new Ghost call continues and you can't stop it because you can't interface the phone. SUPER embarrassing. Has happened twice, not foolproof repeatable (but probably because I'm losing a willingness to actually use the phone).
3. After every call (repeatable, every time) the device instantly powers off.
4. Dropped call, plus instant power down.
My 3G seems to fly and everything else non-phone related seems fine... but I have yet to experience a full beginning-call-to-end-call success. I loaded up some music and photos and synced my contacts to Google and loaded one app (NY Times)... that's it.
At this point I have a great PDA but not a meaningfully reliable phone. Any help is most appreciated... because I NEED a reliable phone! (duh!) I've perused the subjects and keep up on the news and see lots of drop problems but nothing like this... maybe I just got a dud?

Ah hah! User error! Trying to pull a fast one on the plastics industry I weaseled my original model semi-soft Belkin case onto the 3G, apparently hosing the proximity sensor and otherwise causing unintended contact with assorted areas of the interface. $30 to the apple store for more precisely 3G molded plastics later, and full functionality is restored, 2nd day was in pretty heavy usage, crystal clear, no drops, zippy Internet. 3G is actually strong and speedy here in eastern MA, fwiw. Insanely overpriced plastic but worth every penny in the end.
Many thanks. Sorry, iPhone haters.

I'm having a problem when I make the first call of the day, people cannot hear me. Always the first call of the day.

This is on iPhone 4S

Hello,
Thank you for contacting Mozilla.
I understand that you are having problems with placing calls and that the other part is unable to hear you properly. In order to better understand and investigate on the issue that you are encountering, please reply to this message with the following information:
* What is the OS version found in the Device Information page? Please visit [http://mzl.la/Gzz6Kp this link] if you need help finding the Build ID of your phone.
* Please provide the exact steps to reprodcuce the issue you are encountering.
* Who is your current cell phone carrier?
* How often do you encounter this issue?
Please be sure to include as much detail as possible, including any websites that may exhibit this issue, and any error messages that you may be receiving, exactly as they appear. This will ensure that we will have all the information needed to investigate into this. Thank you for your help and we look forward to hearing from you!

How do you save changes made in iPhoto, and export the changed file. It keeps reverting back to the original.

How do you save changes made in iPhote, and export the changed picture file? When I select export, current format, it reverts to the original, wiping out all my work.

Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7 or later: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

Working in Logic 9, how do I use a drum loop WITH ITS PRESET EFFECTS? I can drag and drop the loop but it plays dry in timeline. thanks

Working in Logic 9, how do I use a drum loop WITH ITS PRESET EFFECTS? I can drag and drop the loop but it plays dry in timeline. thanks

Here's the short-cut solution:
Green Apple tracks are MIDI files (so to speak). If you drag one from the loop browser (Capitol C Orchestral hit, as you mentioned in this exable) directly into the arrange page it creates the MIDI file and the instrument to play it back on.
HOWEVER.If you create and audio track first, THEN drag the green Apple loop onto that track, the loop will get "bounced" with the reverb in tact and you'll have the exact sound that you heard in the preview.
Make sense?

How to quickly pick up a 2nd call and drop the first call

Similar Messages

Maybe you are looking for