Can a GL be assigned to Cond type RA01?

Hie.
Can condition type RA01 (Discount) be automatically tag to G/L accounts?.
My scenario - user wants to create sales order with RA01 in it. When saving the sales order with the net vale after less RA01, user expect to have an automate Sales Order or Billing to capture the discount RA01 into accounting document.
I could not find in customizing that we can assign G/L accounts to RA01, the same as we can assign it to material AAG.
I would appreciate any idea on how to capture the requirement as explained above.

Hi all,
TQ for yr responds. I have tried steps mentioned in above replies. However, in VKOA, i have to fill in these data:
Application        - V
Condition typ     - ???*
Chart of Acct     - 0001
Sales Org.        - ???**
Acct asgnmt g - ???***
Account key     - ERS
My queries:
In my Cond Type, there is only 2 data available i.e KOFI and KOFK. When i tried to insert RA01, system prompt me error message "entry C V RA01 does not exist in T685"
I've checked T685, and found the following:
Usage   Application    Cond Type
A              M               RA01
A              V               RA01
C              V               KOFI
C              V               KOFK
Usage A is Pricing and usage C is Account Determination. How can i insert RA01 as C when in the first place it is categorised as Pricing (A)?
Sales Org - if i have 50 sles org to maintain its GL for RA01, does this mean that i have to maintain the GL one by one per sales order here?
Acct Assgnmt Grp - i believe that AAG is extracted from Material Master Data. But RA01 is a Pricing COndition Type which carries no AAG. What should i put it here? How can i assign GL without AAG? (If i choose Table 5 - Acct Key instead Table 3- Material Grp/Acct Key, tehre is no AAG specified. Can i choose this?)
Would very much appreciate yr feedback on this matter.
TQVM!

Similar Messages

Assigning storage bin type to storage unit type

Hello guys,
I would like to know the purpose of assigning the storage bin type to storage unit type in the storage bin type search table.
Thanks,
Maxx

Hello Maxx,
First let's understand what is the meaning of "Storage unit type"
Storage unit type is type of pallet i.e. big pallet, small pallet, industrial pallets etc so all this pallets have standard sizes.
Now let's understand what is the meaning of "Storage Bin type"
Storage bin type the classification of storage bin according to their characteristic /size i.e. 1 meter bin, 2 meter bin , 4x2 bin etc
Now if you have requirement that 1 meter bin should allow only small pallets not big pallet becuase it can not be fit in 1 meter bin so you can restrict this by assigning storage bin type to storage unit type.
Hope this will help you to understand the concept for assigning Storage bin type to SU type.
Regards
Arif Mansuri

Can we assign same basic type to different message type in ALE

Hi Expert
can we assign same idoc type to different message type?

Hi,
Yes you can assign the one idoc type to multiple message type. Message type nothing but it represents the kind of data we transfer.But idoc type is the format in which we transfer data. As an example in Messager types "ORDERS" and "ORDRSP" both indicates the order related data, and in both case idoc type can be ORDERS01, ORDERS02.............
Thanks,
Asit Purbey.
Edited by: Asit Purbey on Oct 12, 2009 3:07 PM

VPRS cond type is not appearing after creating a sales order

Dear Friends,
I have copied pricing procedure from Std pric procedure i.e from RVAA01.
In Material master in Accounting 1the following things are maintained,
Valuation Class--7920 ( Finished products)
VC Sales Order Stock--7920 ( Finished products)
Pricing Control-V ( Moving average Price/Periodic unit price)
Standard Price--- Blank
Price Unit--1
Total stock--100
In Pricing procedure VPrS cond type is included and settings are as follow,
Statistics---Relevant
Subtotal-- B ( carry over value to KOMP-WAVWR (cost))
Requirement--4
Item Catg is TAN and in Business data it is relevant for Determine Cost.
Activated cost determination for item categ TAN
But when I am creating sales order VPRS cond type is not appearing.
Analysis is saying
The requirement 004 is assigned to this condition in the pricing procedure. This requirement was not met and so the condition was excluded from further processing.
Can anybody tell me where I am going wrong?
Regards,
Shrikant

Hi Friends,
Thanks for your reply as per your instruction I have maintained cond type and also in Pric procedure I removed 4 from Requirement column.
Now I am getting following error,
Diagnosis
This condition has not been determined using condition records. The amount or value should be determined from another data source. For cost (condition category 'G') it is read using conditions from the material valuation segment, for a cash discount condition it is read using conditions from the terms of payment table.
In this transaction an error occurs - the material valuation segment or the terms of payment table could not be read or a currency translation has failed.
System Response
The condition has been provided with the deactivated indicator 'X'.
Procedure
Refer to the messages in the status line of the condition overview screen.
Regards,
Shrikant

Tax cond types are different in SD & FI

Dear All
One thing I am not able to understand..
Tax cond type which I define in FI, I am not able to see in SD. Here is the path in FI
SPRO-->FINANCIAL ACCOUITNG > FINANCIAL ACCOUTING GLOBAL SETTINGS->TAX ON SALES/PURCHASES>BASIC SETTINGS-> define cond type
Whereas I define cond type in SD, path is
SPRO --> Sales & Distribution --> Basic Functions --> Pricing --> Define cond type.
at both places cond type do not matches and this causes error in billing doc and accounting doc is not generated.
Can any body help.
Regards
Neeraj Jain

Hi SJ
First of all thanks for answering me.
When I try to release the invoice for Accounting, I get t he error message.
Tax code in procedure ZTAXIN is invalid
Message no. FICORE704
Diagnosis
The tax code entered is not defined in the country for this company code.
System Response
Procedure
Check and, if necessary, correct the entry.
Procedure for System Administration
If it is not an input error, check and possibly change the system settings.
To do this, choose Maintain entries (F5).
1. Check whether the required tax determination procedure is assigned to the relevant country. the Procedure field is in the detail screen.
2. Create a new tax code if required.
The above one is error message.
Regards
Neeraj Jain

Assignment of Step type and CR step for MDG_S

Hi
This is in continuaton for thread MDG_S workflow.
I original issue which is for MDGS when I assigned WS543000005 to CR type and sumitted CR goes no where,
As as per SWEL it shows No Reciver Found enen though GET_AGENT table is maintained.
In another system I found that WS531000044 is assigned ti CR Type Then I tested it and found that CR creates Work Items also upto final processing.
as per below
Before CR Submission : CR status is 02: Changes to be executed
After CR Submission : CR status is 01:To be considered and Approved
After CR Reviewer approves : CR status is 09: Dependant Data to be processed /Approved
After Purchase reviewer Finalize processing :CR status is 09: Dependant Data to be processed /Approved
After Finainace reviewer Finalixe processing :CR status is 09: Dependant Data to be processed /Approved
Now I can not see CR any where even though CR step 04 and 04 assigned to my user ID
I have some questions as Description in Define Change Request Steps is not Mataching with description in GET_AGENT desesion table.
Also it is observed that step 80 is not assigned to WS531000044 in IMG node Define Change Request Steps but it can be seen in GET_AGENT decesion table and step no 06 and 07 does not appears in GET_AGENT decesion table ( In edit mode).
Can you explain from where assignment of CR steps to CR type in desion table are taken ino accout ?
Why description is not matched for steps under IMG and in decesion table?
Can you explain me releationship between CR step and step type,CR Status and where they \maintained in IMG and how proceeses modelling is diffenent t for determination of Next CR step in case of WS531000044 ?

Please keep in mind that "hard-wired" workflow templates are just that: hard-wired. This means that a specific workflow template (for example WS53100044) will always have the same number of steps, each step will always have the same type and number, agents will always be assigned in the same way, and those can't be altered by configurations. To understand each workflow template's behavior, you can either open that template in transaction PFTC or SWDD, or alternatively, read the exact behavior in SAP Help documentation. You basically need to google the workflow template number and you should be able to find the description of each template's behavior (by the way, the number you type has an extra zero so if you can't find a match on Google, you will know why ).
Now, the assignment of CR steps to CR type is done in the workflow template itself and NOT in the decision table. See the first screenshot:
The step number above "should" correspond to what is in the configuration table (for readability and consistency of documentation purposes). However, if for some reason, it does not, the hard-coded value is the value that will actually be considered. So, in technical terms, the assignment of step numbers in MDGIMG has no influence on how the workflow template will behave. Again, the main purpose is for the corresponding description in the step number configuration table to show on the CR window.
The other thing is the step type. A step type purpose is mainly to indicate what set of buttons will show at the top of the CR window. The fact that step types are represented by numbers confuse a lot of people with step numbers. I would have personally preferred if step types were a 2-char field so that a clear distinction can be made between step types and step numbers. In any case, buttons on the CR correspond to actions and you can see in MDGIMG that you can assign step types to actions. SAP delivers a pre-defined set of step types and associated actions. Those must NOT be altered because they could break the standard workflow templates. However, you can create your own custom step types and link them with as many actions (standard or custom actions) as you like. But again, you can't assign those custom step types to hard-wired workflow templates. You can only use them in your custom workflow templates or in the rule-based workflow.
Now, the question is how does the hard-wired workflow know what step type to use. The answer is easy: you can either find that in the SAP Help documentation or in the workflow template definition in transaction SWDD. For the above screenshot, the step type is 2. You can find that if you double-click the task ID TS75707980 (or display it using transaction PFTC) and look in the "Cntainer" tab. In this case, this task will ALWAYS have type 2. Other tasks are assigned different step types or are more dynamic in the sense that they expect the step type to be passed from the main workflow template calling them. For example TS53200002 will always have type 7, TS60808005 will always have type 5, and TS60807954 accepts the step type dynamically. This last one is the one used in the rule-based workflow (hence it has to read the step type configured in the decision table).
I hope this answers you question. You definitely need some level of workflow design/build knowledge in order to be able to completely understand all of this. Hopefully, this gives you a good starting point.

Condition Type to add up prev cond types

hi All,
Sorry for my limited knowledge--I want to know if I've to create a new cond type and put in the Pricing Proc:
10     ZPR0     List Price
15     ABCD       jk;avvjnk;
20     ZABC     ABC Discount
25    GHIJ          aknvnan
30     ZXYZ      Temporary price reduction
40          Gross Net Price
50     ZSSS     SSS standard discount
60     ZSUM       Sum of ZPROZABCZXYZ
280     NETW     Value of Goods
290     ZGRV     Gross Value
how can I do the step 60, without using subtotals?
Regards,
Rags.

Dear Rags
Not sure, whether you can succeeed but make a try.
You have to insert three step numbers as follows:-
Step::CType::Description::::::::::From:::To:::BasTyp
55:::::::::::::::::subtotal1:::::::::::::::10::::::15:::::164
56:::::::::::::::::subtotal2:::::::::::::::20::::::25:::::164
57:::::::::::::::::subtotal3:::::::::::::::30:
60:::::ZSUM::::Sumtotal:::::::::::::::55::::::57
Last but not least, dont feel sorry as everybody is learning by trying to give solution as like your case.
thanks
G. Lakshmipathi

How to assign a pricing type to the pricing procedure ?

Business Scenario : When the prices change from the time the order is taken to the time the invoice is created, how can setup the system to handle the changes automatically ?
I would like to know How to create a pricing type and How to assign a pricing type to the pricing procedure so that I can use the 'new pricing document' function in the sales document and 'Update prices' on the condition screens in the Billing document.
Thanks for your input in advance.
Oscar

Hi !! Oscar,
1) For pricing type definition you would require the help of a developer.
2) However, most of the commonly occuring requirements are supplied with standard SAP.
You can assign a pricing type to pricing procedure as follows:-
IMG>S & D >Basic Functions>Pricing>Pricing Control>Define & Assign pricing procedures>Maintain pricing procedure> Here, locate your pricing procedure , in the fourth coloumn using the drop down list, you can assign a pricing type to the pricing procedure.
Now you can use the 'new pricing document' function in the sales document and 'Update prices' on the condition screens in the Billing document !
Regards,
PATHIK
Message was edited by:
Pathik Pandya

Account assignment for Movt type 101 and 501

All SAP Gurus,
We want to do the account assignment for movt types 101, 102, 122, 123, 201, 202, 261, 262 accourding to the movement types.
We are aware that the Transaction Key is 'GBB'.
But how to know that which 'General Modification' is used for which movement types.
(in short where we can find this link between movement types and Transaction Key and 'General Modification')
Regards,

To know this first you have to know what does the different general modifications means for GBB:
AUA: for order settlement
AUF: for goods receipts for orders (without account assignment)
and for order settlement if AUA is not maintained
AUI: Subsequent adjustment of actual price from cost center directly
to material (with account assignment)
BSA: for initial entry of stock balances
INV: for expenditure/income from inventory differences
VAX: for goods issues for sales orders without
account assignment object (the account is not a cost element)
VAY: for goods issues for sales orders with
account assignment object (account is a cost element)
VBO: for consumption from stock of material provided to vendor
VBR: for internal goods issues (for example, for cost center)
VKA: for sales order account assignment
(for example, for individual purchase order)
VKP: for project account assignment (for example, for individual PO)
VNG: for scrapping/destruction
VQP: for sample withdrawals without account assignment
VQY: for sample withdrawals with account assignment
ZOB: for goods receipts without purchase orders (mvt type 501)
ZOF: for goods receipts without production orders
(mvt types 521 and 531)
You can also define your own account groupings. If you intend to post goods issues for cost centers (mvt type 201) and goods issues for orders (mvt type 261) to separate consumption accounts, you can assign the account grouping ZZZ to movement type 201 and account grouping YYY to movement type 261
Then go and check OMWN.
Regards,
Indranil

Assign an output type to a message type

Hi all,
How do I assign an output type to a message type?
Thanks in advance.
JM

You maintain the output type determination settings for the inbound and outbound delivery handlers, so that output types can be determined for deliveries, pursuant to the message control mechanism.
 a. You maintain the output types in Customizing for Logistics - General ->upply Chain Planning Interfaces (SCPI)-> Auto-ID Backend Integration->IDoc Processing ->Operational IDocs -> Output Type Determination -> Output Type Determination for Inbound/Outbound Deliveries-> Maintain Output Types.
reward points if it is usefull....
Girish

Table to see pricing procedures assigned to document types

Hi Folks,
Greetings for the day,
How can i see the pricing procedures that are assigned to document types.
1. Is there a specific table name?
2. Is there a tcode where we assign pricing procedures to document types.
For example if there is pricing procedure "abc0000", how can i know what are the different document types that are assignes to this pricing procedure.
I would like to know the table name or transaction code.
Thank you in advance.
Best wishes,
Sarath

First of all, you should know where we assign the pricing procedure. If you come to know this, you would not have opened this thread. As already suggested, you can see all pricing procedures assigned to the available combination in table T683V.
In one way, you can check this. Execute VBAK table, input all document types with some validity period where you can see the related pricing procedure. But here, if you have not created any document with a document type, then this table won't show. So you have to be sure on this.
G. Lakshmipathi

Assignment of output type to billing document

I have a billing document for which output type is not assigned.
Now, whenever I am trying to take the print by VF02, it is asking for output type. and i am giving any output type, the error is coming that " No output type is assigned to the billing document".
Please suggest, whether we need to assign the output type to the billing document??

Hi Praveen,
You should have a output determination procedure along with the billing type assigned to the output type(for eg: RD00,RD01 etc).Apart from this you should have a valid condition record which you create using VV31 in which you can control the key combination by maintaining chosen fields in the condition table which pulls the data as per the access sequence and provide you enough combination(for eg: for a certain sales org and Billing type combination etc )
In the condition record you define the medium,dispatch time and language and not forgetting the output device as well.
Hope this info has been useful.
Rgds,
Aram K.

Assigning the output type to the shipment number

hello,
can any one tell me how to assign the output type to the shipment number.
Ex: ALTR to all my shipment numbers. By default, its taking other output types.
Thanks in advance.

Hello!
Please check which output-types for shipment have been maintained in transaction code VV7x (Output-Condition Records).
Menu path: Logistics -> Sales and Distribution -> Master Data -> Output -> Shipment
- VV71 - Create
- VV72 - Change
- VV73 - Display
Or go to customizing (TCode: SPRO) to verify how they have been maintained:
Menu path: IMG -> Logistics Execution -> Transportation -> Basic Transportation Functions -> Output Control -> Maintain Output Determination for Shipments
Regards.

How to assign the trip type to a particular employee. - Urgent

Hi,
In HR - Module - Travel Management.
I am trying to create a travel request for an employee.
i am getting the error message :
Statutory trip type does not exist in the system (T702G)
how to assign the trip type to a particular employee.
regards
Giri
*Points will be assigned for all the valid answers.

Hi Fred,
If you open any activities or opportunities, you can see the description if you select new button and click on the process type. It will be display Activities and below that New: Activity. Instead of always displaying the same description I want to override the description according to the process type. For me the application is not activity but Incident. Hope I am clear with the question.
Thanks,
Anu

Assign sales order type to Sales Area

Hello everybody,
I am trying to assign a sales order type to my sales area, and i have an error : the system tells me that my sales area is not defined. What can i do?
I already defined my sales area, and i can see it in IMG->Entreprise Structure->Assignment->Sales and Distribution->Set up Sales Area.
whwn i try to assign my sales order type to the predifined Sales Area it works. what am I supposed to do to be able to assign a document type to my sales area.
Thank you in advance,
Silvia

1. Defining Common Distribution Channels for Master Data
Use
The purpose of this activity is to define distribution channels which have common master data..
Procedure
Access the activity using one of the following navigation options:
IMG Menu -> Sales and Distribution -> Master Data -> Define Common Distribution Channels
Transaction Code: VOR1
2. Defining Common Divisions for Master DataUse
The purpose of this activity is to define distribution channels which have common master data..
Procedure
Access the activity using one of the following navigation options:
IMG Menu -> Sales and Distribution -> Master Data -> Define Common Division
Transaction Code: VOR2
3. Assign Sales Area To Sales Document Types:
A. Combine sales organizations / Combine distribution channels / Combine divisions: Ensure to maintain these, else Sales Order creation will give error.B. Assign sales order types permitted for sales areas: Assign only required Sales Order Types to required Sales Area. This will minimize selection of Sales Order Type as per sales area.
Check the above configuration. It should resolve the error once it is maintained appropriately.
Regards,
Rajesh Banka
Reward points if helpful.

Can a GL be assigned to Cond type RA01?

Similar Messages

Maybe you are looking for