Can GG work in a RAC environment which has no shared storage except ASM

Gurus:
I have a 2 nodes RAC which is on ASM for database data and FRA. However, it has no other shared space on the file systems.
Can I still use GoldenGate? How can I do it.
Please advise.
dz

GoldenGate needs to be able to read the online redo logs for each thread, and running on ASM requires a few extra configuration steps. You need an ASM user to be able to connect to the ASM instance (involving listener and tnsnames.ora files). Extract parameter file uses the TRANLOGOPTIONS parameter. This is covered in the installation guide ("Additional requirements for ASM," plus the section on "Additional requirements for Oracle RAC").
In 11gR2, you can use ACFS for the GoldenGate software and its files.
Oracle GoldenGate High Availability using Oracle Clusterware Technical Whitepaper
http://www.oracle.com/technetwork/middleware/goldengate/overview/ha-goldengate-whitepaper-128197.pdf

Similar Messages

  • In Oracle RAC environment which is OLTP database? load balancing advantage.

    In Oracle RAC environment which is a OLTP database? List the options for load balancing along with their advantages.

    You can use a software load balancer.
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Software+AND+Load+AND+Balancer&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Installing and Configuring Web Cache 10g and Oracle E-Business Suite 12 [ID 380486.1]
    Thanks,
    Hussein

  • How can i export the data to excel which has 2 tables with same number of columns & column names?

    Hi everyone, again landed up with a problem.
    After trying a lot to do it myself, finally decided to post here..
    I have created a form in form builder 6i, in which on clicking a button the data gets exported to excel sheet.
    It is working fine with a single table. The problem now is that i am unable to do the same with 2 tables.
    Because both the tables have same number of columns & column names.
    Below are 2 tables with column names:
    Table-1 (MONTHLY_PART_1)
    Table-2 (MONTHLY_PART_2)
    SL_NO
    SL_NO
    COMP
    COMP
    DUE_DATE
    DUE_DATE
    U-1
    U-1
    U-2
    U-2
    U-4
    U-4
    U-20
    U-20
    U-25
    U-25
    Since both the tables have same column names, I'm getting the following error :
    Error 402 at line 103, column 4
      alias required in SELECT list of cursor to avoid duplicate column names.
    So How can i export the data to excel which has 2 tables with same number of columns & column names?
    Should i paste the code? Should i post this query in 'SQL and PL/SQL' Forum?
    Help me with this please.
    Thank You.

    You'll have to *alias* your columns, not prefix it with the table names:
    $[CHE_TEST@asterix1_impl] r
      1  declare
      2    cursor cData is
      3      with data as (
      4        select 1 id, 'test1' val1, 'a' val2 from dual
      5        union all
      6        select 1 id, '1test' val1, 'b' val2 from dual
      7        union all
      8        select 2 id, 'test2' val1, 'a' val2 from dual
      9        union all
    10        select 2 id, '2test' val1, 'b' val2 from dual
    11      )
    12      select a.id, b.id, a.val1, b.val1, a.val2, b.val2
    13      from data a, data b
    14      where a.id = b.id
    15      and a.val2 = 'a'
    16      and b.val2 = 'b';
    17  begin
    18    for rData in cData loop
    19      null;
    20    end loop;
    21* end;
      for rData in cData loop
    ERROR at line 18:
    ORA-06550: line 18, column 3:
    PLS-00402: alias required in SELECT list of cursor to avoid duplicate column names
    ORA-06550: line 18, column 3:
    PL/SQL: Statement ignored
    $[CHE_TEST@asterix1_impl] r
      1  declare
      2    cursor cData is
      3      with data as (
      4        select 1 id, 'test1' val1, 'a' val2 from dual
      5        union all
      6        select 1 id, '1test' val1, 'b' val2 from dual
      7        union all
      8        select 2 id, 'test2' val1, 'a' val2 from dual
      9        union all
    10        select 2 id, '2test' val1, 'b' val2 from dual
    11      )
    12      select a.id a_id, b.id b_id, a.val1 a_val1, b.val1 b_val1, a.val2 a_val2, b.val2 b_val2
    13      from data a, data b
    14      where a.id = b.id
    15      and a.val2 = 'a'
    16      and b.val2 = 'b';
    17  begin
    18    for rData in cData loop
    19      null;
    20    end loop;
    21* end;
    PL/SQL procedure successfully completed.
    cheers

  • Can I import iWork from my Mac, which has Snow Leopard, to my MacBook Air, which has Mountain Lion?

    Can I import iWork from my Mac, which has Snow Leopard, to my MacBook Air, which has Mountain Lion?
    I would appreciate any advice on the intricacies of operating with Snow Leopard on my main computer and Mountain Lion on my MacBook Air.

    I'm not sure there are any intricacies except you can't use iCloud to keep the two things synced. It would be mostly contacts, Safari bookmarks, Calendars, notes, etc.
    Also, iCloud allows saving iWork documents in the Cloud, so you can access them on both systems. That would not be available for the old Mac.
    The two OSes are similar enough that it wouldn't be too difficult to work between the two, but there will be differences in using the Finder (contextual menu changes)
    I thought I would have more, but I've been off Snow Leopard for so long now, I'll leave this for someone who is currently operating like that or recently switch to Mountain Lion from SL.

  • Is MAC OS X v10.6.8 same as MAC OS X Snow Leopard. Since i want to download MAC OS X LION can it be downloaded on my mac which has MAC OS X v10.6.8 ??

    Is MAC OS X v10.6.8 same as MAC OS X Snow Leopard. Since i want to download MAC OS X LION can it be downloaded on my mac which has MAC OS X v10.6.8 ??

    Yes, assuming you can run Lion, & can deal with no more Save or Save As... functions...
    Lion/101.7 System requirements
        •    x86-64 processor (Macs with an Intel Core 2 Duo, Intel Core i3, Intel Core i5, Intel Core i7, or Xeon processor.)
        •    At least 2GB of memory, (I say 4GB)
        •    Latest version of Mac OS X Snow Leopard (10.6.8), with the Mac App Store installed
        •    At least 4GB of disk space for downloading, (I say 40GB at least)
    Like Snow Leopard, Lion does not support PowerPC-based Macs (e.g., Power Macs, PowerBooks, iBooks, iMacs (G3-G5), eMacs).
    Lion also does not support 32-bit Intel Core Duo or Core Solo based Macs. Rosetta is no longer available in Lion, which means Lion no longer supports PowerPC applications.

  • Can anyonehelp, i have updated to ios7 which has put a passcode on my ipad, i keep getting the code wrong, i have ne itunes of cloud sync

    can anyonehelp, i have updated to ios7 which has put a passcode on my ipad, i keep getting the code wrong, i have no itunes or cloud sync

    Duncanray10 wrote:
    ...  I keep getting a message stating my ipad needs software to be 10.6.3. ...
    You are misreading it... it is referring to iTunes on your computer...
    Download and Install the Latest version of iTunes onto your computer...
    http://www.apple.com/support/itunes/install/

  • How can I use Airdrop in my iMac which has OX 10.9.2

    How can I use Airdrop in my iMac which has OX 10.9.2

    If you have an iPhone5 and an IMac,
    - you should have your photos in phototstream (last 1000)
    - your iphone should have your icloud account linked
    - your imac should have your icloud account linked
    more info http://support.apple.com/kb/HT4486

  • Can we create aggregates on the cube which has been compressed

    Hello Gurus,
    Can we create aggregates on the cube which has been compressed. We have a AP cube with 60 Millions of data. If we compress it now, going forward, can i create Aggregates on that cube. How is the performance will effect.
    Answers will be rewarded...

    Hi......
    This is a tablespace problem........its better u contact any Basis people.......Since the no of records is huge......due to this the problem arrise..........they can solve the issue.....
    Anyways check this......
    http://help.sap.com/saphelp_46c/helpdata/en/2e/d9507794f911d283d40000e829fbbd/content.htm
    Regards,
    Debjani.....

  • Pointing existing RAC nodes to a fresh Shared Storage discarding old one

    Hi,
    I have a RAC Setup with the Primary Database on Oracle 10gR2.
    For this setup, there is a Physical Standby Database Setup (using DataGuard configuration) also with 30min delay.
    Assume that the "Shared Storage" of the Primary DB fails completely.
    In the above scenario, my plan is to refresh a "fresh" shared storage device using Physical Standby Database Setup and then "point" the RAC nodes to the new "Shared Storage".
    Is this possible?
    Simply put, how can I refresh the Primary database using the Standby Database?
    Please help with the utilities (RMAN, DatGuard, other non-Oracle products etc.) that can be used to do this.
    Regards

    Does following Shared Device configuration is fine for 10g RAC on Windows 2003?
    . 1 SCSI drive
    • Two PCI network adapters on each node in the cluster.
    • Storage cables to attach the shared storage device to all computers.
    regard.

  • Query can't  work in others language environment

    I created a query , also linked transcation code.   The query can work in english language environment ,  but  use others language login( example 'ZH' ) ,the query can't  work .  meet error as below .   Please help what it's happen and how to solve, thanks.
       Exception condition "NO_FIELDCATALOG_AVAILABLE" raised.
    错误分析
    A RAISE statement in the program "CL_GUI_ALV_GRID===============CP" raised the
    exception
    condition "NO_FIELDCATALOG_AVAILABLE".
    Since the exception was not intercepted by a superior program
    in the hierarchy, processing was terminated.
    Short description of exception condition:
    For detailed documentation of the exception condition, use
    Transaction SE37 (Function Library). You can take the called
    function module from the display of active calls.

    Hi NS MENG.
    You can try two ways:
    1. GoTo->SE63->Translation->Logical Objects->Logical Objects.
    You can also try other options available.
    2. GoTo->SE41(Menu Painter)->GoTo->Translation.
    You can try using some options.
    Hope this helps.
    Good Luck.
    Harsh Dave

  • Can't send mail to POP Account which has attachment or signature

    Since installing the Update 10.4.6, I have been unable to send email to my pop account which has either a signature or an attachment (when there is no attachment or signature it works fine). I have cleared the caches using tiger cache cleaner. I have tried adding a new user account to mail. It doesn't work in Entourage either. I've reinstalled Mail. What else do you recommend?
    Prior to installing the update, mail worked great for over a year!
    Additional Information:
    Whenever I press the send icon, the mail message disappears, then in the activity viewer it gives the message “Delivering message / Sending data (28% done) and hangs there for a long time and finally gives the following message:
    Cannot send message using the server XXX
    Use the pop-up menu below to try a different outgoing mail server. All messages will use this server until you quit Mail or change your network settings.
    Whenever I send an email with text and a signature, the activity viewer it gives the message “Delivering message / Sending data (100% done) and hangs there for an extremely long time and finally gives the same message.

    Mario_MM wrote:
    For sending mail the POP server is not important what you need to check are the settings of the SMTP server. Verify the settings of the SMTP server again and compare it to your settings on your iMac.
    Checked SMTP settings and they are identical to the working iMac. I had not changed any settings on my MBP when it stopped sending, plus it did work briefly last night with those settings, so I don't see how it could have anything to do with my settings being incorrect.
    The only thing even remotely different that I did prior to this happening was to use it away from home. I was out of town and used someone else's wifi to send some emails, but can't see how that should matter. It was the same ISP that I use at home, so I never even had to change settings for remote access. I never touched a thing, but when I got home I could no longer send emails.

  • How can I release (or abort) a download which has stuck at Processing?

    I have a music download (which I have been charged for) which has been stuck at Processing for over 10 days.
    Unable to cancel or abort from iTune Store. My Music is now locked and unavailable. (VERY frustrating)
    Unable to fully open iTune Store as it freezes part way and all I get is the text and boxes with no graphics or interaction
    One discussion suggested that my modem may need re-flashing. As it was over 6 years old, I replaced it - but still can't clear the download.

    Hi, Philipp,
    Thank you very much for your prompt reply and support. The IE icon disappeared immediately after I downloaded MF. I tried to download IE again but without success. In the end all my icons on my start page disappeared, although I do not think this was to do with MF. I had to resort to restoring my lap top to factory settings for the umpteenth time and I have now got IE back but no MF. I will keep your advice and will try again when I am feeling brave enough and have sufficient time to try and download MF again. I am not confident with technical problems and greatly appreciate your help and support.
    Kind regards, K.

  • Hi I have 2 apple id's one which has pulled through everything except my calendars and one which has pulled through just my calendars. How do I move my calendars from one apple id to another?

    Hi I have 2 apple id's one which has pulled through everything into icloud except my calendars and one which has pulled through just my calendars. How do I move my calendars from one apple id to another so that I can see everything in icloud with one apple id?

    Having read some other posts I think I have answered my question. If I was somehow able to terminate my old (unwanted) account and Apple ID I would no longer be able to access the material I bought with that ID-  so I'm stuck. I have to learn how to manage that situation.
    This is unfortunate for Apple consumers. Life is complicated for families these days and this "rule" although it is in place to prevent cheating and fraud makes things unnnecessarily difficult for me and my family as in my niaevity (sic) with the online world I bumbled into this situation. Not everyone is out to rip off Apple - one of the worlds richest corporations- or the entertainers who market their work through iTunes.I would just like to be able to enjoy the entertainment I pay for where and when I like to on whichever computer is available to me. And I'm not terribly computer literate.   
    It would have been nice to have had the opportunity to speak just once to a real person in the employ of Apple to explain my situation to them.

  • 10g RAC on varitas Cluster Software & Shared storage

    we are in process of making 10g RAC without using Oracle Clusterware , we will be using Varitas Cluster software and varitas shared storage , I am looking for some quick notes/article on setting up/Installing this RAC configuration.

    Step-By-Step Installation of 9i RAC on VERITAS STORAGE FOUNDATION (DBE/AC) and Solaris
    Doc ID: Note:254815.1
    These are the notes i was looking for, Question is Only the RDBMS version will be changes , all other setup will be same as mentioned in Notes, and DBA work will start from creating DBs, right?

  • How do i remote desktop to my mac which has internet shared to it?

    Hello,
    I am very new to remote desktop.
    I am trying to connect to my iMac at my office, using my macbook pro at home. However the iMac has internet shared to it from another iMac.
    The imac locally  has an ip address starting with 10.x.x.x . I am able to connect to it using my macbook pro in my office, but i am unable to do so at home.
    The other complication is the imac and the imac i am sharing internet from seem to have the same IP (a 192.36.x.x.x one).
    Any suggestion on how to over come this ?

    Messages (which is used to access iMessage) comes with Mountain Lion and above. It is not available for Snow Leopard.

Maybe you are looking for