Can I build an user Interface using a proccess with Human Task?

Hi,
I'm building an application, web application, with a several screens. The application just will be used for entering some data and depending on the data entered, some bpel process will be launched.
I'm thinking about implementing a MVC using a BPEL Process with Human Task. I mean: I'll make everything with bpel process (*including the application*). I would make a bpel process with some human task. This process would be like a Spring Webflow file or similar. Each screen wouldl be a human task but with synchronus nature. Will it be possible? Will it be so complicated? Is it usual?
Other way would be making a web application to enter data and then launch a proccess that will record the information in the database. That would be the normal way.
Thank you so much.

Hello,
There's a more powerfull solution you may use.
You can create a View. Some Views can be updatable (it means that it's possible to update
the Table from the View) and, you can add constraints (Primay Key) on a View.
For instance:
CREATE OR REPLACE VIEW {color:red}User2.view_name{color}
({color:red}col1{color}, {color:red}col2{color}
UNIQUE RELY DISABLE NOVALIDATE,
CONSTRAINT {color:red}pk_view{color}
PRIMARY KEY {color:red}col1{color}) RELY DISABLE NOVALIDATE
) AS
SELECT {color:red}col1{color},{color:red}col2{color} FROM {color:red}User1.Table1{color};This example is from the link bellow:
[http://www.psoug.org/reference/views.html]
Hope it can help.
Best regards,
Jean-Valentin

Similar Messages

  • Can I run a User Query using SDK?

    Hi I am new to SDK development.
    Can I run a user query using SDK?  what I am after is, when the user clicks a button on my screen, I want to run the user query already in the system.
    If this can be done, does anyone know how to do this? I have not been able to find a way of doing this so far. appreciate any help here.
    Thanks,
    Indika.

    Hi,
    I have an additional question to this thread. Does anyone know a way how to run an user query, and how to pass some parameters to it, so the user doesn't have to write them down manually?
    For example, I add a button on a Bussines partner form and when this button is clicked, I want a query to be started with parameter %1 = businnes partner's code...
    Is there some way how can I do this?
    Thanks
    Bohous

  • How can I have a single cursor using elements 9 with Windows 7?

    Currently the cursor on my screen is 3 small boxes in place of the single arrow.  I am using Photoshop Elements 9 With Windows 7.  I have loaded the patch files currently in the Adobe system without any success.

    Thank-you that solved the issue.
    In a message dated 4/20/2014 8:57:10 P.M. Eastern Daylight Time, 
    [email protected] writes:
    Re:  How can I have a single cursor using elements 9 with Windows 7? 
    created by Barbara B. (http://forums.adobe.com/people/Barbara+B.)  in 
    Photoshop Elements - View the full  discussion
    (http://forums.adobe.com/message/6315096#6315096)

  • Can I get iCloud if I use a MacBookPro with Intel Core Duo (not Core 2). I can't upgrade from 10.6.8 to 10.7 without a Core 2.

    Can I get iCloud if I use a MacBookPro with Intel Core Duo (not Core 2)? I can't upgrade from 10.6.8 to 10.7 without a Core 2.

    Lion (10.7.x) needs Core2Duo.

  • Can BEA JMS C APIs be used to communicate with other JMS servers?

    Hello,
              Can BEA JMS C APIs be used to communicate with other JMS servers?
              If yes, is it enough to download, compile the JMS C APIs, and link the C applications to the libraries (shared or static) produced?
              If not, can you point me to an open source framework that can be used to enable C applications to communicate with JMS servers?
              I have HP-UX server that has both C and Java compilers (Java 1.5).

    The JMS C client is a pre-compiled library - we don't supply the source - so C applications link to it. If I recall correctly, there is an HP version. The C client library is actually thin layer that uses JNI to directly invoke a Java JMS client running in an embedded JVM.
              The library might work with other vendor's Java JMS clients, but BEA does not officially support this usage.
              Tom

  • Error in report builder wizard user interface

    I am getting error 'REP-31954: Error in the Report Builder Chart Wizard user interface'.
    The help subsystem states that I should make sure that the Chart Builder Wizard libraries are properly installed.
    I am sure they are because all other wizards work fine, along with the Forms, Reports, etc.
    I searched using Google and found two messages that indicate this is a bug in the program and not library installation related.
    Does anyone know if this is indeed a bug that has not been resolved, or do I need to troubleshoot more on my end.
    I re-linked Oracle graphics and checked the env variables, but nothing gets the Chart Wizard to work within Reports or Forms.
    Any help/advice would be greatly appreciated.
    Thank you.

    Hi.
    I am running developer 6i on my home machine (with Oracle 8i, v 8.1.7). I am at work at the moment, and I can't recall what the Reports version is. The same error occurs with Forms.
    The filename that I downloaded is called 'd2k6irelease2.tar'.
    I downloaded the version that is currently on Oracle OTN's download site, so I presume that is the latest version that should contain all patches, updates, etc.
    Thank you for responding!

  • Re:error in report builder wizard user interface

    I am getting error 'REP-31954: Error in the Report Builder Chart Wizard user interface'.
    The help subsystem states that I should make sure that the Chart Builder Wizard libraries are properly installed. I am sure they are because all other wizards work fine, along with the Forms, Reports, etc. I searched using Google and found two messages that indicate this is a bug in the program and not library installation related. Does anyone know if this is indeed a bug that has not been resolved, or do I need to troubleshoot more on my end. I re-linked Oracle graphics and checked the env variables, but nothing gets the Chart Wizard to work within Reports or Forms. I am running developer 6i on my home machine (with Oracle 8i, v 8.1.7). The same error occurs with Forms. The filename that I downloaded is called 'd2k6irelease2.tar'. I downloaded the version that is currently on Oracle OTN's download site, so I presume that is the latest version that should contain all patches, updates, etc.
    Any help/advice would be greatly appreciated.
    Thank you for responding!

    Hi Adrian,
    Got the following when grepped through the web. You can give a try and see whether it works :
    1) Open the report in the Builder. In the properties for the graphic image, change to the proper UNIX path. Also, ensure the .ogd file which is referenced is also placed in the proper UNIX directory, so that the new path is reflected accurately.
    2) Ensure that your environment have the ORACLE_HOME set properly and then try re-linking with Graphics.
    Thanks,
    Vinod

  • How can I allow network users to use File Sharing on 10.8 Server?

    I am in the process of setting up a new OS X 10.8 Server. I have exported/imported the network users from my previous OS X 10.6.8 Server using Workspace Manager. I have re-entered the passwords of the users. I have existing clients running (stil logged in).
    I have set up the File Sharing service in Server.app. I have several mount points. I have made the Users mount point available for home directories over AFP.
    Now, the system administrator can connect to the server and get access to the file shares. So the basic file sharing system works.
    Also: the users on a client can get there password verified (e.g. when unlocking screen protection) by the server. It is just AFP they can't get access to, while the system administrator account (OD /Local on the server) can be used. So, the password in the server is OK too. It seems to be a matter of privileges.
    But no network user (OD user in directory /LDAPv3/127.0.0.1 on the server) can get access. Where can I give network users privileges for File Sharing on the server?
    I did try to add either the "Open Directory Users" group or a specific user that was imported into com.apple.access_afp. If I do that, there is partial success. I can connect to the server from the client with a user account other than system administrator from the server (but connecting is slow). But Mobile Home Sync does not work:
    1:: [13/04/05 16:11:10.379] Scheduling next sync of "HomeSync_Mirror" at 2013-04-05 14:11:20 +0000
    1:: [13/04/05 16:11:20.782] ==========================================================
    0:: [13/04/05 16:11:20.782] Starting automatic sync of "HomeSync_Mirror".
    1:: [13/04/05 16:11:20.786] Peer "network" reports changes since last sync.
    1:: [13/04/05 16:11:20.786] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:alias:]: isRemote = NO
    1:: [13/04/05 16:11:20.786] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:rootPath:rootAlias:rootRef:storePath:optionalStoreID:]: peer = <SPeer_FS:0x7fd5a5009520> = local, optionalStoreID = (null), peer.storeIDString = *
    1:: [13/04/05 16:11:20.786] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:rootPath:rootAlias:rootRef:storePath:optionalStoreID:]: rootPath        = /Users/gerben
    1:: [13/04/05 16:11:20.786] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:rootPath:rootAlias:rootRef:storePath:optionalStoreID:]: storePath       = /Users/gerben/.FileSync/store.filesyncstatetree
    1:: [13/04/05 16:11:20.787] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:rootPath:rootAlias:rootRef:storePath:optionalStoreID:]: rootAlias       = {path='/Users/gerben', targetName='gerben', volumeName='Macintosh HD', type=DIR, volumeCreateDate=2010-08-10-12:58:16, targetCreateDate=2011-08-28-18:39:13, parentDirID=37638, nodeID=3003598, filesystemID=0000 ('0000'), signature=0x482b ('H+'), isBootVolume=YES, isAutomounted=NO, isEjectable=NO, hasPersistentFileIDs=YES, mounted=YES, url='file://localhost/'}
    0:: [13/04/05 16:11:20.789] -[SPeer_FS _mountServerCallbackShares:status:]: received error 64
    0:: [13/04/05 16:11:20.790] EXCEPTION: _mountServerCallbackShares:status: (Host is down) <-[SPeer_FS mountPeerVolumeWithURLString:] (Peer-FS.m:446): "'(-1)' error 64">
    0:: [13/04/05 16:11:20.790] USERINFO: {
    0:: [13/04/05 16:11:20.790]     NSLocalizedDescription = "Host is down";
    0:: [13/04/05 16:11:20.790] }
    0:: [13/04/05 16:11:20.790] BACKTRACE: {
    0:: [13/04/05 16:11:20.790] ? | 0x105cb79b7  
    0:: [13/04/05 16:11:20.790] ? | 0x105cbf0e5  
    0:: [13/04/05 16:11:20.790] ? | 0x105c2c866  
    0:: [13/04/05 16:11:20.790] ? | 0x105c2babd  
    0:: [13/04/05 16:11:20.790] ? | 0x105c2acb4  
    0:: [13/04/05 16:11:20.790] ? | 0x7fff858bb72a
    0:: [13/04/05 16:11:20.790] ? | 0x7fff858bb6a2
    0:: [13/04/05 16:11:20.790] ? | 0x7fff874cf8bf
    0:: [13/04/05 16:11:20.790] ? | 0x7fff874d2b75
    0:: [13/04/05 16:11:20.790] }
    1:: [13/04/05 16:11:20.790] Peer "network" is unable to sync. (-[SPeer_FS mountPeerVolumeWithURLString:] (Peer-FS.m:446): "'(-1)' error 64")
    0:: [13/04/05 16:11:20.790] Peer "network" is unable to sync. Not enough peers will be available to continue syncing.
    0:: [13/04/05 16:11:20.790] Aborting sync of "HomeSync_Mirror".
    1:: [13/04/05 16:11:20.790] -[SPeer abortSync] "local"
    1:: [13/04/05 16:11:20.797] -[SStore_FS setupWithAlias:andRef:] (Store-FS.m:447): unlink('/Users/gerben/.FileSync/.fstemp.QW1Gh-bhvgEhVwmG3.noindex')
    0:: [13/04/05 16:11:20.798] EXCEPTION: !IF <-[SPeer(protected) doPrepareForSyncWithResolvedConflicts:] (Peer.m:1149): "'(([self checkAbort]))'">
    0:: [13/04/05 16:11:20.798] BACKTRACE: {
    0:: [13/04/05 16:11:20.798] ? | 0x105c2bb66  
    0:: [13/04/05 16:11:20.798] ? | 0x105c2acb4  
    0:: [13/04/05 16:11:20.798] ? | 0x7fff858bb72a
    0:: [13/04/05 16:11:20.798] ? | 0x7fff858bb6a2
    0:: [13/04/05 16:11:20.798] ? | 0x7fff874cf8bf
    0:: [13/04/05 16:11:20.798] ? | 0x7fff874d2b75
    0:: [13/04/05 16:11:20.798] }
    1:: [13/04/05 16:11:20.798] -[SStore_FS deleteStateTreeTurdFile] (Store-FS.m:476): unlink('/Users/gerben/.FileSync/store.filesyncstatetree.statetree_dirty')
    1:: [13/04/05 16:11:20.798] Peer "local" is unable to sync. (-[SPeer(protected) doPrepareForSyncWithResolvedConflicts:] (Peer.m:1149): "'(([self checkAbort]))'")
    0:: [13/04/05 16:11:20.798] Peer "local" is unable to sync. Not enough peers will be available to continue syncing.
    1:: [13/04/05 16:11:20.798] EXCEPTION: SFAbortedException <-[SSyncEngine _waitForPeers:] (SyncEngine.m:1922): "'(_abort)'">
    1:: [13/04/05 16:11:20.798] -[SSyncEngine threadMain_SyncEngine_sync:]: sync failed with exception "-[SSyncEngine _waitForPeers:] (SyncEngine.m:1922): "'(_abort)'"".
    0:: [13/04/05 16:11:21.066] Sync of "HomeSync_Mirror" encountered errors. (_mountServerCallbackShares:status: (Host is down))
    0:: [13/04/05 16:11:21.067] Last successful sync completed at 2013-04-04 20:17:15 +0000.
    0:: [13/04/05 16:11:21.067] Finished sync of "HomeSync_Mirror".
    1:: [13/04/05 16:11:21.067] Scheduling next sync of "HomeSync_Mirror" at 2013-04-05 14:31:21 +0000
    1:: [13/04/05 16:11:21.284] 1-pass sync of "HomeSync_Mirror" took 0.02 seconds

    Hi Gerben,
    Try creating a brand new user, that's not imported and see if that works. Every user/group has a little gear in the Server.app/Users or Groups which allows specific access to specific services, perhaps filesharing is off in that section?
    Is your DNS setup properly? Can you verify that clients can see the FQDN of your server?
    After setting up the Users folder for mobilehomes, did you check whether the group and the separate users have access to filesharing? I am able to select the correct homefolder /Users and restrict the homefolder size.
    Goodluck!
    Jeffrey

  • Labwindows/CVI 7.1 Remote user Interface using Enterprise Connectivity Toolkit

    I have an application programmed in Labwindows/CVI 7.1 controlling an Electromagnetic Instrument.
    Now am interested in extending its usability by adding remote user interface.The goal is to have the application available to be accessed 
    to remote users through website,with multiple users viewing it but one user controlling the instrument remotely at any given point.
    Since the possible methods would be 1.ActiveX 2.TCP/IP 3.DLL
    Which is the best technique to implement this with out having to manipulate much of my code also do we have any documentation available ?
    Thank you
    Solved!
    Go to Solution.

    Hi Mutha,
    This functionality was a part of the orignal Internet Toolkit for CVI.  However, the web server part of this was removed and isn't included in the Enterprise Connectivity Toolkit.  You might consider using LabVIEW with the Remote Front Panel feature.
    Cheers, 

  • Can't allocate any users to use iCal Server

    Have successfully set up 10.6.1 server. DNS and Open Directory both OK. iCal service is running on default port 8008 and is using the default server dns name.
    The problem we're having is that in Workgroup Manager we cannot allocate a user to use iCal. Under the Advanced settings tab for a user where you enable calendaring for the user the pull down menu only shows "No calendar host selected", the configured iCal server is not displayed.
    This has occurred on three separate fresh installs on three separate boxes.
    Any ideas appreciated!

    That doesn't really make any sense. I can connect iCal 10.5.x clients to the iCal 10.6 test server just fine and they pulled down test data. I plugged in account details and connected to the users iCal server calendar account.
    Perhaps you misunderstood them? The guy I spoke with told me that you manage almost all calendar data on the wiki/mypage tool now and not in workgroup manager. Users can access their calendar on mypage, groups manage their calendars via the wiki. It may not be ideal (I would have preferred using workgroup manager for this stuff) but it seems to work. You can also manage delegation to your calendar via the iCal client. If something specific for you isn't working, it'd probably be better to open a thread on these forums and post details if a specific feature isn't working so people can help you.
    The only feature I really find lacking with this web method of management is that you can't really have a user without that user having a calendar (and having access to that calendar). The SACL only prevents them from connecting via iCal client but they can still connect via the mypage tool.
    Also, 10.6 is a new server version and 10.5 had many of these same issues (perhaps more). Either you have this on a test server and you wait it out and just report fixes to Apple or you jumped the gun and installed it on a production server at which point you accepted the risk of a new server OS. Doing so on client systems is one thing (they're easily rolled back), servers is a completely different matter and should be handled with care. Obviously 10.5.x server matured enough for you to want to use it so 10.6 likely will as well so just bide your time on a test server and try to improve the release by reporting bugs or roll back to 10.5 and continue to use it until you're ready to jump to 10.6.
    In short, as of now, the "enable calendaring on this host" has nothing to do with whether a user can access iCal services on a 10.6.1 host. If you create a user in workgroup manager, the current behavior is that they now have at a bare minimum, a web calendar. If you enable the SACL for iCal, I believe you can limit access via the iCal client but they'd still have web access. If this behavior is poor (I believe it is and would prefer more fine grained control) then make sure and report it.

  • How can I give the "user interface thread" higher priority?

    We do alot of activex calls to front panels. We need to increase/decrease the priority of the user interface thread to resolve our thread problem. Anyone know how to do this?
    Chuck

    Hello,
    As P.M. was saying, you can adjust the thread priorities
    through the VI Properties dialogue. 
    Another place to modify the multithreading system in LabVIEW is a VI
    located at: [LabVIEW Directory]\vi.lib\Utility\sysinfo.llb\threadconfig.vi.  However I do not think this will remedy any
    problems you are having.
    From a Multithreading in LabVIEW tutorial (http://zone.ni.com/devzone/conceptd.nsf/webmain/d2e196c7416f373a862568690074c759)
    Priorities in the User Interface and
    Single-Threaded Applications
    Within the User Interface execution
    system, priority levels are handled in the same way for single-threaded and
    multithreaded applications.
    In single-threaded applications and
    in the User Interface execution system of multithreaded applications, the
    execution system queue has multiple entry points. The execution system places
    higher priority VIs on the queue in front of lower priority VIs.
    If a high-priority task is running and the queue contains only lower priority
    tasks, the high-priority VI continues to run. For example, if the execution
    queue contains two VIs of each priority level, the time-critical VIs share execution time exclusively until both finish.
    Then, the high priority VIs share execution
    time exclusively until both finish, and so on. However, if the higher priority
    VIs call a function that waits, the execution system removes higher priority
    VIs from the queue until the wait or I/O completes, assigning other tasks
    (possibly with lower priority) to run. When the wait or I/O completes, the
    execution system reinserts the pending task on the queue in front of lower
    priority tasks. Refer to the Synchronous/Blocking Nodes section for a list of
    asynchronous functions that wait.
    Also, if a high priority VI calls a lower priority subVI,
    that subVI is raised to the same priority level as the caller for the duration
    of that call. Consequently, you do not need to modify the priority levels of
    the subVIs that a VI calls to raise the priority level of the subVI.
    Thus changing the priority of your VI will change the
    priority of UI calls for that particular VI. 
    Again, I caution you because I suspect that if you are having problems
    with your application not running correctly, I do not believe that manipulating
    the thread priorities will resolve these issues.
    Hope this helps,
    Travis M
    LabVIEW R&D
    National Instruments

  • All Korean users are using V20 firm with their 580...

    Although Nokia is not so famous company in Korea because Samsung and LG are dominant mobile phone companies, there are more than 80,000 5800-users.
    But all of them use their phone with V20 firmware.Can you believe it ?
    5800's price in Korea is $470 without "CWM"
    Nowadays , V50 firm was released. But, we, Korean, still wait for V40 which was promised to support by Nokia till June.
    In Korea, OVI map is not serviced.
    It's very rough and tough circumstance, isn't it?

    From what I understand, phones in Korea all come from network providers right? Correct me if Im wrong please.
    Anyway, if your phone comes from a network provider, it is their responsibility to approve and release the update for the product codes of the phones they released, not Nokia's. Nokia would have already sent the update to their technical department by this time.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • How can I create a Online Store using Muse? (with not Business Catalyst)

    How can I create a Online Store using Muse with not Business Catalyst for example three services
    _ttps://orders.self-pub.net/checkout.php?m=fastcheckout
    _ww.self-pub.net/services/covers.html

    Hi,
    Unfortunately there is no option stand alone in Muse to create an online store. However if any hosting plan uses CMS feature like Business Catalyst and ecommerce using modules and tags, you can use the same proceedure as for Business Catalyst and integrate that system and host the Muse site on their platform and that would work.
    There is other thing that you can try is, Insert HTML codes to link the pages and some contents in Muse to your desired CMS. What you can also do is after you create the site in Muse, you can export the Muse site and get the layout and design of your site and copy paste the codes for pages with some HTML and coding skills to integrate with your desired hosting.
    Hope this helps.
    Regards,
    Rajan

  • Using Physical Databse In Human Task Of A BPEL Process

    Hello Fnds,
    I am Bhanu Teja,While creating a Human Task,we get a dialog box,"Identity lookup dialog",I want to get list of users from Database.....I want to know is this is possible,if so can anyone guide me how to do it.I am using 10.1.3.1 version of SOA suite...
    Regards,
    Bhanu Teja
    Edited by: user10998866 on Apr 11, 2009 12:43 AM

    Hi Bhanu Teja,
    i am also working on the same. But I want the users in the dailog come from the OID. Do you know where the users come from the OID Server. I want to know what the filter it applies to show the users in the dailog box.
    Its a bit urgent for me. could you please reply soon.
    Waiting for your reply.
    Thank you,
    Siva.

  • How to use External Routing in Human Task

    Hi,
    Could you please help me knowing how to create External Routing in Human Task in SOA Composite.
    Thanks

    When defining the external routing class in the .task, you can define the name value pairs which you want to pass to the program. Here you can pass dynamic values to the class as well by reading the appropiate node from the payload. In your class the name, value would be available in the "Map propertyBag" parameters in Rajiv's example link.
    Document says:
    Map of properties — When an assignment service is specified, a list of properties can also be specified to correlate callbacks with backend services that determine the task assignees.Or if you are too lazy to map many parameters and values, you can always read the whole Task task and then use getDocument and some xml reading to determine the values. This Task is the whole document.
    API:
    http://docs.oracle.com/cd/E17904_01/apirefs.1111/e10660/oracle/bpel/services/workflow/task/model/TaskType.html#getDocument__Document says:
    Task document — The task document that is executed by the workflow. The task document contains the payload and other task information like current state, and so on.Also you need to make sure that you are maintaining the state of the assignment class, doc says:
    The assignment service class cannot be stateful because every time workflow services need to call the assignment service, it creates a new instance.Thus if you are doing multiple serial assignments one after the another and if your server restarts in between, then the approval would start at the first assignee again. Suppose in Rajiv's doc link e.g., if the task is assigned to 'wfaulk' and the server restarts then the task would be assigned back to 'jstein'. In order to prevent this you need to modify the java code and each time the variable changes it's value you need to place it in a dehydration store. Also on each action over the process you need to reinitialize the variable from that dehydration store.
    -Bikash

Maybe you are looking for