Can i concatenate or add to the existing header text with new text  logic

Hi,
Is it possible to concatenate additional text into an existing text type? For example, would it be possible to write new logic where if certain conditions are met, the text in theheader detailswould be added to the existing Preparation Header text?
I have on e delivery , i want to add the header text with with  date field (concatenate header text with date (godds issue date)in a single text
please let me know.

Venkata
Unfortunately I am not aware of any such standard FM, I searched for it during my first reply itself, but no benefit.
You can develop one if no std FM is available for this with the help of your technical g uy.

Similar Messages

  • Can't replace old text with new text in a text box

    Hello everyone. This is my first time posting in the forum, so I'm hoping this works out well. We recently purchased a few copies of Adobe Acrobt X for the office, and one of the users is having an issue with editing text in a field. She can type new text into a box, but when she goes back to replace that text with something else, the old text stays. New text appears on top of the old text, and you can see both. Is there a way to simply highlight the old text, delete it, and then replace it with new text? Thanks in advanace for your assistance. I understand this might be confusing, so let me know if you have questions.
    Thanks,
    Dan

    You have to use the text touchup tool (there is a new name like text edit tool in AA X) to edit such text. It sounds like you are using the typewriter tool or something like it. Text editing in Acrobat is not for the weak at heart. It can be very frustrating and is not recommended except for very minor changes. If at all possible, you should edit the original and just recreate the PDF.

  • Change inbound IDoc 860 overlay the old text with new text

    Currently whenever change inbound IDoc 860 gets posted new text gets appended. My requirement is: old text needs to be overwritten with new text.  Can you please advice
    Thanks

    Hi Hock,
    thanks for your answer. Unfortunately i think your are right.
    Yesterday i got an answer from debopriyo mallick, does anyone know,
    why this answer is dissapear?
    Regards, Dieter

  • Front end issue (how to handle the existing work along with new one)

    We have upgraded a copy of our production system and are analyzing different pieces to make sure that we have enough confidence in moving ahead. We are getting a good feel in the back end activities but do have many questions in Front end area, such as
    ·     What is the best way to handle existing excel reports yet at the same time providing users ability to create new queries and excel reports. Currently users are using Bex browser to access reports but this is no longer supported for new reports.
    ·     Do we must have portal configured in order to access the new features?
    ·     Is there a risk if users open the existing workbooks with the help of new analyzer?
    ·     Is there a risk if users open the existing queries with the help of new query designer?

    Until you migrate them to 2004s, you can continue to access the 3.x queries, etc. using the 3.x tools. 
    However, once you modify/save the 3.x query using the 2004s tools, it will convert that object and all related objects (variables, structures, etc.) to the new 2004s version.
    A suggested strategy for conversion of BEx objects to 2004s is to migrate them by infoarea.  For example, convert all FI-GL objects together.  This method enables BW teams to create a "roadmap" for migration.

  • How to replace the existing selection screen with new selection screen

    Hi,
    I have first selection screen with parametre as a table name, then I have created dynamic selection screen as 2nd selection screen with different fields of that table as select options. This is done using genaration of dynamic report. Now If I click on button on this 2nd selction screen , then I want to replace this 2nd dynamic selection screen , with the other selection screen fields.
    Can anybody guide me, How to do replace one slection screen with different selection screen.
    and one imp thing is this selction screen is populating with dynamic fields on it.
    Regards,
    Mrunal

    As I can understand you want to make some of the screen field to disable or visible on screen  depending upon the interaction of user with screen 1.
    You may use this example code in PBO of screen 2.
    LOOP AT SCREEN.
        " action has been taken to modify the area office screen as per the option chosen at screen 99.
        CASE ACTION.
            " if the user has taken up the option of UPLOAD
          WHEN 'UP'.     " screen processing while we upload the plan
            " during upload we will make dates as output fields only
            IF SCREEN-NAME = 'ZSDTPLANVRSIO-DAT_TO' OR SCREEN-NAME = 'ZSDTPLANVRSIO-DAT_FRM'.
              SCREEN-INPUT = 0.
              MODIFY SCREEN.
            ENDIF.
            " also make 2 buttons disabled
            IF SCREEN-NAME = 'AO_DO' OR SCREEN-NAME = 'AO_VE'.
              SCREEN-ACTIVE = 0.
              MODIFY SCREEN.
            ENDIF.
          WHEN 'DN'.      " screen processing while we upload the approved plan
            " during upload we will make dates as output fields only
            IF SCREEN-NAME = 'ZSDTPLANVRSIO-DAT_TO' OR SCREEN-NAME = 'ZSDTPLANVRSIO-DAT_FRM'.
              SCREEN-INPUT = 0.
              MODIFY SCREEN.
            ENDIF.
            " also make 2 buttons disabled
            IF SCREEN-NAME = 'AO_UP' OR SCREEN-NAME = 'AO_VE'.
              SCREEN-ACTIVE = 0.
              MODIFY SCREEN.
            ENDIF.
          WHEN 'VW'.      " screen processing while we view the plan
            " during upload we will make dates as output fields only
            IF SCREEN-NAME = 'ZSDTPLANVRSIO-DAT_TO' OR SCREEN-NAME = 'ZSDTPLANVRSIO-DAT_FRM'.
              SCREEN-INPUT = 0.
              MODIFY SCREEN.
            ENDIF.
            " also make 2 buttons disabled
            IF SCREEN-NAME = 'RLGRAP-FILENAME' OR SCREEN-NAME = 'FNAME'.
              SCREEN-ACTIVE = 0.
              MODIFY SCREEN.
            ENDIF.
            " and hide the file input field
            IF SCREEN-NAME = 'AO_DO' OR SCREEN-NAME = 'AO_UP'.
              SCREEN-ACTIVE = 0.
              MODIFY SCREEN.
            ENDIF.
        ENDCASE.
      ENDLOOP.

  • Over write the existing master data with new master data.

    hi friends,
    we have 2 sources for master data text like source A and source B to load the master data text and as per requirement we have to stop load from source A. But if you check the master data target still the old records are existed (from Source A), if i try to delete those records as you know it is not allowing...and more over if we want to delet the mastr data we have delete the transaction data.
    In Mycase i don't want to delet the Transaction data and i need to over write the existing master data i.e Request A with Rquest B.
    Is there any solution for this issue.
    Thanks in advance,
    Sruthi.

    For overwriting the text from source B you have to have transformations from source B to your text datasource of your characteristic. Then you map the text coming from source B to the text for the characteristic.
    If it comes form source B the key for that characteristic with text, it will overwrite the text existed for that characteristic to the same key.
    For example you have 0employee and have a text datasource in source A which has employee_id and employee_name. In the Bw you have mapped in your transfer rules the employee_id to the employee_id and the employee_name to the employee_name. So for example you have extracted from source A the record:
    employee_id   employee_name
    0001               xpto
    If you have a same datasource of text coming from source B, if you do the same mapping in transfer rules in BW coming from source B, and you bring for example the record:
    employee_id   employee_name
    0001               zzzz
    You'll overwrite the old value of xpto to the new value zzzz
    Diogo.

  • Is there a way to add to the existing values in a container when a LabVIEW prototype (cluster) changes?

    Is there a way to add to the existing values in a container when a LabVIEW prototype (cluster) changes?
    I have a cluster with 90 values..  ninety!  yes that many.
    Change one bloody value and the prototype changes in the TestStand step...  Reload the prototype and guess what happens??!!??
    All the bloody values get reset to defaults!  AAAAAAAAAAAAAARRRRRRRRRRRRRRRRRRGGGGGGGGGGGGGGGGGHHHHHHHHHHHH!
    If it was in one place, I could survive the ordeal.  But I have to change bloody prototypes in many places!!!!
    more AAAAAAAAAAARRRRRRRRRRRGGGGGGGGGGGHHHHHHHHHHHHHH!!!!!!!!!!!!!!!!!!!!!!
    I can't even copy the bloody values!!!!!!!  AAAAAAAAAAAARRRRRRRRRRRRRRGGGGGGGGGGGHHHHHHHHHHHH!!!!!!!!!!!!!!!!!!
    Are there any tricks that I am not aware of, or have forgotten over the years, or...  ...   something??!!??!???!!
    If there are none, I will have to post an improvement to TestStand..  I should mention I am using an older version (4.1).

    Hmmmmmmmmmmmmmmmm,
    I am not not very famous with LV and its cluster types.
    So no idea if this works (it works for DataTypes updates very well and a LV cluster is Data Type so.... maybe)
    Make a copy of the step that has to be modified to an new sequencefile. 
    Make modifications the in the copy.
    Now you should have the same DataType Name but other contents in the container. Save it.
    Normally there should be a message box that tells you that version has been incremented. - Accept it.
    Set in StationOptions-File "Allow Automatic ...." to Never.
    Open original sequencefile. Now the there must be a type conflict. Accept/Apply to all  "Use Current Loaded.."
    You have updated the type.....
    Hope this worked,
    Juergen
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

  • How to transfer music from a iPod classic to computer to add to the existing library on computer but Without it erasing the music on the ipod when done?

    Trying to figure out to transfer music to computer to add to the existing libary  without erasing the music on the ipod.

    You can transfer music from iPod to computer by these steps:
    Open iTunes on your old computer.
    Connect your iPod to your old computer and wait for it to appear in iTunes.
    Select your iPod on the left side of the iTunes window under the Devices section to display your iPod preferences.
    Click the Summary tab in the main iTunes window.
    Select the "Manually manage music" checkbox. This will also select Enable disk use.
    If the above steps does not work, you can try some 3rd party apps like iPod Transfer.

  • When I upload any photos from iphoto or a folder it overwrites all the existing photos. is there a way to add to the existing library without deleting what's already in the library?

    When I upload photos from iphoto or any other folder it overwrites all the existing photos in my ipad. is there a way to add to the existing library without deleting what's already in the library?

    No, apart from using the emailing them, to yourself or using a third-party app such as Simple Transfer (in which case the photos will only go into the Saved Photos/Camera Roll album) or the camera connection kit (Imported album). You need to sync all the photos that you want on the iPad in one go, as only the contents of the most recent sync remains on the iPad - not including photos in a sync is how you delete them from the iPad

  • Hi, How much creative cloud storage can I purchase in addition to the existing 20Gb

    Hi,
    How much creative cloud storage can I purchase in addition to the existing 20Gb & what are the various plans & fees?
    Regards,
    Iain.

    Individual CC allocates 20GB of space. If you want more space you can buy CC for Team with one seat as each seat provides you 100 GB of space.
    Membership plans: Pricing | Adobe Creative Cloud
    Regards
    Rajshree

  • How can I use the old Apple TV with new iTunes?  It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync.  I can access the iTunes Store fine, just none of my Library

    How can I use the old Apple TV with new iTunes?  It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync.  I can access the iTunes Store fine, just none of my Library

    read this
    https://discussions.apple.com/message/20429789#20429789

  • How can I make two copies of the same picture one with my watermark and one without for printing for clients?

    how can I make two copies of the same picture one with my watermark and one without for printing for clients?

    Export the photo twice, once with a watermark and once without a watermark.

  • II  downloaded the OS X version 10.9 and my iPhoto version 9.2.3 will n.ot open.  I get a message that I can't use this version of the application I photo with this version of OSX.  What do I do now and how do I get the photos out of the old version?

    I downloaded the OS X version 10.9 and my Iphoto version 9.2.3 will not open.  I get a message that I can't use this version of the application I photo with this version of OS X.  How do I upgrade to a i photo that will run on 10.9.  Do I purchase a new program or can I do just an download?

    Check the "Purchases" page in the Mac App Store and see if there is a more recent version there already waiting for you.

  • I bought bought over 200 Apps back in 2011, can i re download them under the same account to my new iPad?

    I bought over 200 Apps back in 2011, can i re download them under the same account to my new iPad?

    Yes, you can re download them.
    http://support.apple.com/kb/ht2519.

  • I have a version 1 iPad. I would like to be able to use my LCD projector to display content to my students. I have the dongle to attach to the projector, but can't make it work. The process DOES work with my friend's iPad 2. Any advice? Thanks!

    I have a version 1 iPad. I would like to be able to use my LCD projector to display content to my students. I have the dongle to attach to the projector, but can't make it work. The process DOES work with my friend's iPad 2. Any advice? Thanks!

    Expanding on what deggie said, with an iPad 1 the app you're using must support video out. Only the iPad 2 can mirror the screen. The apps included with the iPad that output to external monitors are given here:
    http://support.apple.com/kb/HT4108
    For third-party apps, consult the app's documentation or contact the developer.
    Regards.

Maybe you are looking for