Can I force UWL iview to get the updated task items when first visit

Hi all:
We are implementing EP7 on aix. Currently UWL iView will not display the updated items when first click on. Only when I click on the tasks tab, it will display the updated items. I change set keepItemCountUpdated tag to Yes, but it doesnot work.
Can we force the UWL iview to connect to backend to get the updated items when it is first launch ?

Have a look at the properties of the UWL iView, for example "Wait duration before calling providers on loading of UWL" and similar properties.
You could try setting these to lower numbers to hurry up the initial update.......

Similar Messages

HT4972 I have an iphone 4s and it's telling me that there is a software update available to iOS 6. When I got to "settings" on my phone, the "download and install" tab is not highlited and I can't click on it to get the update.

I have an iphone 4s. I have an alert that there is a software update available to iOS 6. When I got to the settings tab, the "download and install" button is not highlited and I can't click on it. Below that, it says that this update requires a Wi-Fi network connection to download. So I connected my phone to my computer and tried to update throug itunes. When I clicked the update tab on itunes on my laptop, an alert pops up that says I need to be connected to the internet for th update to take place. I am confused because I am connected to the internet, but for some reason the connection is not being recognized when I try to update.
I am using a Gateway laptop and my internet connection is a verizon 4g device that I plug into a USB port. I feel like this should be so simple but have not been able to figure it out even when I called Apple and spoke to a rep...help!

In order to download to your phone over the air, you need to be connected to WiFi.
It's possible the Internet connection through Verizon is not stable enough for the downlaod to begin (it is a very large download).
You might want to head over to Starbucks with your laptop for the afternoon and see if you can download it over their WiFi.

I continually get the Update message and when I click it runs and never completes update. This has happened everytime I log in.

Whenever I log in on my computer, I get a Firefox Update message and when I click on it it continually runs for hours and never completes the update.

If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

How can I open a file and get the data inside file when using WebStart

When I use ClassLoader,
Which methold can I use the read the information inside that file?
Thanks
Ryan

Assuming you are trying to read the jar file.
http://forum.java.sun.com/thread.jspa?forumID=22&threadID=572955
rykk

I have an iPOD mini library and now have a IPhone 4S. I updated my library and synced my phone to the library but can not figure out how to get the music library to download to my iphone

I have an iPod mini library which I have update. I now have an iPhone 4S which I have synced to the library using a MS XP computer. I can not figure out how to get the library to download to my iPhone?

Thanks, This caused me to go back and try again since the solution seemed so simple. What I did was when it started downloading, it started with the iphones apps to my computer. I did not want the apps downloaded on my computer so I stopped it. If I would have waited, the music was uploaded right after the apps were downloaded.

I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes:Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufac

I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
Thanks for your help in advance....

Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks!

The updated iPhoto program is cumbersome. I am trying to create a Christmas card and can't figure out how to get the fold of the card on the left and not on the top of the card. I had no trouble with this for the past two years. Can someone help?

The updated iPhoto program is cumbersome. I am trying to create a Christmas card and can't figure out how to get the fold of the card on the left and not on the top of the card. I had no trouble with this for the past two years. Can someone help?

Click on the Layout button lower right and choose a Vertical lyout from the dropdown

I can't get the volume to work when I watch a you tube video, there's no volume slide under the play button, and my volume control on my I pad won't do anything either, but the volume of all my alarms and sounds works perfect, what can I do??

I can't get the volume to work when I watch a you tube video, there's no volume slide under the play button and my volume control on my I pad don't do anything to help, but yet my volume works perfect on everything else, what can I do???

do u have your ipad doing airplay because that could happen

I have Elements 10 and a Nikon D7100. PSE10 CR 6.7 does not support the 7100 NEF. How can I get the updates to do this?

I have Elements 10 and a Nikon D7100. PSE10 CR 6.7 does not support the 7100 NEF. How can I get the updates to do this?

The D7100 requires camera raw 7.4 which is not compatible with Photoshop Elements 10.
Your two main options are
1) Buy a newer version of Photoshop Elements
2) Use the Adobe DNG converter to convert the NEF files to DNG files which can then be used by Photoshop Elements 10.
DNG Converter 8.8
Win – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5888
Mac – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5887
Useful Tutorial
http://www.youtube.com/watch?v=0bqGovpuihw
Brian

HT201210 I keep getting unknown error 3 when trying to restore my Iphone. On line and chat support won't accept my request as I can't open my phone to get the serial number

this evening has been torturous My phone said I needed to restore thru Itunes/support
I tried and keep getting UNKNOWN Error 3
I tried to get support but I can't open my phone to get the serial number.
Now WHAT????

I was doing some research on this problem for a friend and came across your post and thought I should share this:
https://discussions.apple.com/thread/5372052?start=30&tstart=0
Hopefully it helps, good luck.

I get the following error message when trying to instal in copy: "Creative Cloud Installer" can't be opened because the identity of the developer cannot be confirmed.

I get the following error message when trying to instal in copy: “Creative Cloud Installer” can’t be opened because the identity of the developer cannot be confirmed.

Mac Unidentified Developer Issue
Here's how to open apps that apple should not be blocking:
http://www.imore.com/how-open-apps-unidentified-developer-os-x-mountain-lion

I can not sighn in. I get the message A network error has occurred while attempting to sign in.

I can not sighn in. I get the message A network error has occurred while attempting to sign in.

Hi rebjrbaker,
I'm guessing that you're trying to log in to the service from within Reader. If that's the case, you may need to update the version of Reader you're using. Choose Help > Check for Updates. You should be using version 11.0.9 (this update was just released on Tuesday, 9/16).
Best,
Sara

HT1600 I have an Apple TV 2nd Gen, iPad 2 and can't get the icon to appear when i swipe from left to right. What am I missing? I am able to get the 'Home sharing' 'user and password on my Mac.

I have an Apple TV 2nd Gen, iPad 2 and can't get the icon to appear when i swipe from left to right. What am I missing?
I am able to get the 'Home sharing' 'user and password on my Mac.
Also using IPad 2 I am able to get the ITunes to accept the user name and same password as the Mac.
However, the only way I can see the 'Home sharing; icon is in Music on the Ipad. When I tap on the Icon it asks for a password.
When I give the same password, it is rejected.
Help!!!!
Jaxxdiggs

Personally I think the iOS devices are poor at reconnecting - Airplay establishes that a link is available but when the iPhone/iPad has been away from the house and rejoins the network i think AppleTV already thinks it's connected with a different IP address and fails to recognise it has joined the network again with new credentials.
Something along those lines anyway.
I find that a combination of restarting AppleTV, router and iOS device tends to fix it, but not for everyone.
AC

HT1526 I can't delete any files, can't empty the trash bin, can't open my iTunes. Safari isn't working properly either. I keep getting the error message -50 when i try to delete anything...HELP!

I can't delete any files, can't empty the trash bin, can't open my iTunes. Safari isn't working properly either. I keep getting the error message -50 when i try to delete anything...HELP!

Hello, not too helpful, but...
enum {
paramErr = -50, /*error in user parameter list*/
Usually means a bvad or unacceptable Charachter in a File or Folder name...
http://support.apple.com/kb/TA20831
Solving Trash Problems...
http://thexlab.com/faqs/trash.html
Open Console in Utilities & see if there are any clues or repeating messages when trying to open Safari or iTunes.

I need to update specific records(of variable lengths) in a file. I can get the correct record but when I update it(add info), it overwrites part of the record following it. I am using labview 6.0

I need to update specific records(of variable lengths) in a file. I can get the correct record but when I update it(add or change info), it overwrites part of the record following it. I am using labview 6.0. I need to be able to insert information into the middle of a file without disturbing the data before and after

It's hard to give more specifics without more detail, but in general you're going to need to read in the entire file, split it into three pieces (everything before the record of interest, the record itself, and everything after the record of interest), modify the record, reassemble the three pieces in proper order, and write the whole thing back to the file.Of course if the file is very large you might not want to actually implement it this way, but conceptually at least, this is what you are looking at.If this file some sort of proprietary format?Mike...PS: this type of issue is why I really like databases...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Can I force UWL iview to get the updated task items when first visit

Similar Messages

Maybe you are looking for