Can I have RAC 1st node in RHEL 5 and 2nd node in RHEL 4?

Can I have my RAC 1st node in RHEL5 and 2nd node in RHEL 4?
I am just checking if there is any possibility like that.
Thanks,
Mahi

Even if it works by accident, it wouldn't be supported.

Similar Messages

I have a 1st generation AirPort Extreme and want to create a guest network, can I? If so, how? Can I do this by adding an Airport Express?

I have a 1st generation AirPort Extreme and want to create a guest network, can I? If so, how? Can I do this by adding an Airport Express?

I have a 1st generation AirPort Extreme and want to create a guest network, can I?
This version of the AirPort Extreme does not have guest network capability.
Can I do this by adding an Airport Express?
Why not simply buy a new Airport Express.....which does have main and guest network capability*.....and sell the AirPort Extreme?
* The AirPort Express will need to connect to a simple modem.....not a modem/router or gateway type of device.....for the guest network feature to work correctly.

I have a 1st generation time capsule and an extreme b/g. Is the extreme slowing the network down

I have a 1st generation time capsule and an appe extreme b/g. Is the extreme slowing the network down? Should I dump it an get the new n version?

yes it is likely to be slowing down the network because you are using 802.11b/g
from what i recall with b/g a slow client can slow down the entire network to that clients speed.
this was the major improvement with 802.11n and Mimo. each client can be connected to the access point without affecting your speed to the rest of the network
its reccomended to get all new "N" equipment if you have the budget for it. some of those old airports and time capsules can still be worth something on amazon marketplace so you might be able to sell them
if you want to create / join / extend a netwowrk your going to probably need all "n" based equipment.
buy the new 4th generation time capsule or the new 5th generation airport they have better stronger radios
in the mean time configure your base station router to a high multicast rate, so it will prevent devices connecting to it at 1-2 mbps speeds and slowing down your network
if you have an apple care covered mac remember the airport / time capsule rule. all airports and time capsules purchased 2 years before you bought your mac to the 3 years of apple care covers them. if you do not have apple care then the standard warranty applies

I have a 1st generation MacBook Pro and I recently downloaded OS X Maverick. My iTunes will not open because it says i need a 64 bit version. Already followed the promted instructions but no luck. Any suggestions??

I have a 1st generation MacBook Pro and I recently downloaded OS X Maverick. My iTunes will not open because it says i need a 64 bit version. Already followed the promted instructions but no luck. Any suggestions??

Oh, you do have the C2D! That's great!
I'm no technical expert, I just like to help out whenever or wherever I can so... I don't know if this can help you, but let me tell you about how I got my Snow Leopard to run in 64 bit mode. When I got my (late 2008) iMac it was running in 32 bit mode under Tiger (2.4 GHz/Core 2 Duo). I eventually upgraded to Snow Leopard & it was running in 32 bit mode (by default) w/1 GB RAM.
Somewhere along the line, I happened to watch a YouTube Video that showed how to upgrade an iMac's RAM, so I ordered two - 2GB sticks of Crucial RAM and then - under the guidance of the 14 or 15 year-old young man who posted the video on YouTube; wearing a rather fashionable static-electricity-neutralizer-wrist-strap, I removed 1GB of RAM & plugged in the 4GBs of RAM. So - boom like that, it was like I bought a brand new machine.
It was over a year later when I stumbled across a way to boot Snow Leopard into 64 bit mode. Turns out that if you boot while holding down the 6 & 4 key combo (the ones above the QWERTY keys), then the machine runs in 64 bit mode. Go figure. Now my Snow Leopard and just about all of my applications - with the ironic exception of iTunes - runs in 64 bit. iTunes seems fine though; if there's a performance bottleneck, I really can't tell.
Well, that's about it..
I hope that something I've mentioned can help you achieve your overall goal.
Finally, it's hard to jump onto a train, a large cat, or a surfboard that's already moving. But don't be surprised when someone a fraction of your age shows you how to.
Best Regards,
mm~

Hi, I have the 1st gen apple tv and suddenly when trying to rent a movie I only see movie trailors or my movies. What do I do to see the rental interface??

hi i have the 1st gen apple tv and suddenly when trying to rent a movie i don't see the rental interface. i did a factory restore and now i see movie trailors and my movies but not rental option. any idea what could be wrong??

Judging by all the posts on the forum, there seems to be an issue at Apple's end, although they have made no announcement on their status page. Some users have reported that Apple is aware of the issue. You can leave feedback for Apple at the link below.
http://www.apple.com/feedback/

Can i have a apple id for music and another for icloud?

can i have a apple id for music and another for icloud?

You can use one ID for the iTunes store account where you buy music, and another for an iCloud account.

How many lines can you have on a nation wide talk and text plan?

How many lines can you have on a nation wide talk and text plan?

A max of five lines is allowed on the Nationwide Talk & Text family plan.

My MacBook Pro keyboard not working correctly after Win7 bootcamp installation. In OSx boot it keep Win keyboard. How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

My MacBook Pro keyboard not working correctly after Win7 bootcamp installation.
Installation went well but when I boot either with OSx or Win it always keeps Windows keyboard.
How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

Hi - I have the exact same model as your MacBook and had a few questions as mine is acting up. I upgraded the ram to 8gb (2x 4GB ram) and ever since then my computer has not been running as smoothly and the start up time is horrendous. Have you encountered this problem? And if so how did you fix? What would you advise me do?
I was thinking of reverting back to the original factory 4GB then rebooting the entire computer. Any suggestions?
Thanks in advance!
Allen

Can we have a common database for TARGER and CATALOG in RMAN?

Hi,
Can we have a common database for TARGER and CATALOG in RMAN?
I am trying to duplicate a auxilary database using rman. In this situation can i have common db for target and catalog?
Please suggest.
Thanks
Naveen.

You just won't use a CATALOG database.
Check Creating a Duplicate Database with RMAN for the full process.

Can we have the interface between microsoft excel and adobe illustrator

Can we have the interface between microsoft excel and adobe illustrator?

Feature Request/Bug Report Form
That aside, have you actually already explored variables or the graph tools?
Mylenium

Can you have different passwords for mail account and ICloud?

Can you have different passwords for mail account and ICloud?

Yes - you want to go under Notifications, Mail. Set each acct the way you want.

I changed my number along with my sim card and imessage will not recognize my new number. how can i have imessage forget my old number and use my new number?

i changed my number along with my sim card and imessage will not recognize my new number. how can i have imessage forget my old number and use my new number?
i have tried signing out of imessage and signing back in. (when i do that and am asked to select my email adress, i see my new number but it is greyed out and i cant select it)

But under send and receive, my old number is still displayed while my new number isn't.

Can I have iTunes music on my SSD and an external drive? How will this affect syncing to iOS devices?

I don't have space to keep my entire iTunes library on my SSD. Currently I have my iTunes library split as follows:
SSD: Contains a subset of music, apps, books, etc. New items usually get added here.
External HD: Contains all of my music and iTunes media (including apps... so many apps). It's usually missing the most recent items added, due to the fact I don't plug it in so often.
I ran into a problem maintaining these two libraries earlier while syncing my iPhone. When I tried to sync the iPhone with the SSD library, it would delete apps off of my phone because they weren't contained in the iTunes library there, even though I had the same base .itl file for both the SSD and the external libraries.
What I want to do is set it up so that I maintain a core of music on my SSD and the stuff I don't listen to as often on my external hard drive. I also want to keep all the space hogs (movies, apps, etc) on the external as well. However, I want this to appear as one seamless iTunes library and I DON'T EVER WANT ANYTHING DELETED FROM MY PHONE WHEN I SYNC IT. I want to be able to sync my phone without worrying that apps will be deleted and I'll have to restore them from iCloud and reset all the settings, sign in, etc. Right now I am backing up to iCloud, but my understanding is that iTunes will still delete things from my phone if they are not available in the library.
My question: How do I accomplish this? I have a lot of metadata in my iTunes library that I don't want to lose (playcounts, ratings, etc).
I currently have this:   SSD: .itl file pointing to music on the SSD, a mixture of iTunes media (some that I want easily accessible, some I don't)
                                  External drive: .itl file pointing to music on the external drive, all of my iTunes media (except for anything I may have added to the SSD)
I think I need this:       SSD: .itl file pointing to music on the SSD and the external, music that I listen to often
                                 External drive: music that I don't listen to often, things that take up a lot of space
My thought process is that I will need to somehow move music from the external to the SSD while maintaining the pointers so that iTunes knows where they are. For this I have unchecked "Keep iTunes Media Folder Organized" and "Copy Files to iTunes Media Folder When Adding To Library," and to maintain the pointers and move the songs, I'm thinking of using Doug's Applescripts for "Relocate Selected:" http://dougscripts.com/itunes/scripts/ss.php?sp=relocateselected
Once I have the songs split across these drives, I'm going to copy the .itl file from the external to the SSD and boot it up to see if it works.
Two things: 1.) Will this approach work? Can I maintain my library across separate drives this way and have it be seamless? I understand I won't be able to access the media on my external hard drive when it is not plugged in (duh), but...
2.) Will it affect syncing? When my external isn't plugged in, will iTunes try and delete things from my iPhone? It should still be able to "see" them, it just won't be able to access them. Will I have to turn off syncing apps while syncing with my external device unplugged?
Thanks very much for any help and insight! It is greatly appreciated as I deal with limited storage space and an expanding iTunes library.

This is all just a partial answer since details will depend upon how you want to do it.
Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
Commercial software utility for transferring songs from i-device to Mac - http://www.fadingred.com/senuti/
http://support.apple.com/kb/HT1848 - just media purchased from iTunes Store
You'll need to get it all onto one iTunes collection on your Mac Pro, then sync the devices to that. iTunes only lets you transfer purchases from a device, otherwise you have to use third party software.
I guess you could also look into getting iTunes Match.

How can I have unified contacts across outlook, iphone and gmail?

I am new to iPhone and cannot seem to get something that I really enjoyed on my blackberry, unified contacts across all three platforms. I use Outlook for work and Gmail for personal. I had it set up on my blackberry that I had one set of contacts, not separated by outlook or gmail. The goal was to have the same set of contacts in all three places. Any changes made in any place, outlook, gmail, or blackberry, was reflected in all three places.
Is there a way to do this on the iPhone? I had set up my iPhone to sync with gmail and outlook, but it created two sets of contacts, so when I searched for a person, it would show two or more records. I just want one contact list. Is there a way to turn off the contact seperation and just have one list? I just want to be able to make a change in any of the three places and have it reflected across all three.
I have both work and gmail set up via exchange for push email and syncing.

The contacts had to be separated on your Blackberry but were viewed as combined, which is possible with the iPhone's Contacts app.
With my iPhone, I sync business contacts over the air with my company Exchange account, and I sync personal contacts over the air with iCloud account - former MobileMe account. My personal iCloud contacts are also synced with the Address Book on my Mac and I would be doing the same with my Exchange business contacts but we aren't using a compatible Exchange Server software in order for me to do that. If I was doing so, my business contscts and my personal contacts would be separated in the Address Book on my Mac and I would have the ability to view business and personal contacts combined or separately as I can with my business and personal contacts on my iPhone.
Does Outlook support syncing your Gmail online contacts so your personal contacts would be kept synchronized between the three - Outlook, Google online address book, and your iPhone?
If you are syncing contacts over the air with your iPhone and syncing contacts direct with a supported address book app on your computer via the iTunes sync process, the contacts will be duplicated on your iPhone - one set stored locally, and one set stored in the online address book for the email account.

How can I have my contacts on the cloud and my Mac hard drive?

How can I have my contacts both on the cloud and my Mac hard drive?

go to icloud.com

Can I have RAC 1st node in RHEL 5 and 2nd node in RHEL 4?

Similar Messages

Maybe you are looking for