Can I set a text field to automatically type in caps when I have converted a form to fillable in ADO

When people get to the field where they have to enter their postal code, I want it to automatically type in capital letters whether they do that or not.

Is there something like this that will allow me to type only the first letter of each word in a fillable field as a capital letter?
For example:
This Is What I Want It To Look Like

Similar Messages

How can I set the audio conference to automatically start AS HOST when the meeting starts?

I can easily setup an audio conference for any meeting, and set that conference to start. However, there doesn't seem to be a way for the conference to start as the moderator (or, host) when the meeting starts. This means I still have to dial in to the conference with a land line or cell phone and enter my host code to get the audio conference started.
The only audio conference provider at my company is The Conferencing Center. I don't seem to have a TCC account. What do I do to get this working? It's nuts to have to use a land line just to get the audio going.

There are a number of integrated audio providers other than TCC, and those can be enabled in the Admin section of Connect. However, using the fully integrated bridge does still require that a Host/Leader be dialled in before audio will broadcast (or something other than hold music).
If you don't want to have to call in, I'd recommend that you use Universal Voice to tell Connect the dial in steps and give it the Host/Leader pin.Setting Up Universal Voice - Adobe Connect User Community.
The downside to this is that there will no longer be a dial out option for participants.

Is it possible to add text field in condition type in PO?

Dear Guru,
Please kindly advice. Is it possible to add text field in condition type?
I mean I have seen condition type "FRB1" Freight value in the condition detail we can input vendor code.
So I would like to know is it possible to add text field in condition detail and how to set it up.
Thank you very much.

We would like to maintain some text in condition because of we would like to get that text to PO print out and we don't want to do enhancement.
Ex: Condition Type: ZZZZ Insurance
PO Print out show
Item No.          Desc                                                  Qty Unit Price Amount
10                 Item description                                  10000   10         100000
20                 Item description                                  10000   10         100000
30                 Item description                                  10000   10         100000
                     Insurance <<Description about insurance>>                  9,999
Edited by: Saiyaman on Oct 1, 2009 1:35 PM
Edited by: Saiyaman on Oct 1, 2009 1:36 PM

Forms: How to set a maximum size in Text Fields with automatic size

¡Hi!
When I set a text field on my forms and I use automatic size for te text that the user can write, if the user don't need more space than the field size, when the text appears, Adobe Acrobat Pro always set the text-size to 14 or higher. How can I set a maximum size for that text? For example... 12 or 10...
Thank you very much,
Best regards from Spain,
David.

Ok. If I use a single line text field, changing the height of the field seems to be a simple way to solve the problem, but... what should I do when the fields are multi-lineal?
Thanx for your quick answer.

Required Text Field for automatically generated line items

Hi Experts,
I have noticed that when additional line items is automatically generated by SAP, the line item text field becomes required for those items. This happens regardless of the configuration made in the field status group....
For example, when posting cross company code transactions using account assignment model, the balancing entries (automatically generated by SAP) requires an input for text field. The same scenario happened when I run F-58 in background (BDC), and there are additional line items in my entry.
Can you please share some insights on SAP's behavior. And is it possible to turn it off?
Thank you.
Regards,
Reiko
Edited by: P. Reiko on May 16, 2011 10:25 AM

Dear:
              1st check out the configuration for text filed that whether it has been set mandatory in the following FSG
               1.... Field status groups which we assign to Recon Accounts of customer--OBC4
               2..... Posting keys---OB41
              3....... Field status group for Customer account group
              SPRO>> FA>> AP & AR>> Customer Acct >> Master Data >>Preparations for Creating Customer Master Data              Define Acct Groups with Screen Layout(Customers)
See if it has been set mandatory there. Revert back in case issue is not resolved.
Regards

How can I get the "text" field from the actionEvent.getSource() ?

I have some sample code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.ArrayList;
public class JFrameTester{
     public static void main( String[] args ) {
          JFrame f = new JFrame("JFrame");
          f.setSize( 500, 500 );
          ArrayList < JButton > buttonsArr = new ArrayList < JButton > ();
          buttonsArr.add( new JButton( "first" ) );
          buttonsArr.add( new JButton( "second" ) );
          buttonsArr.add( new JButton( "third" ) );
          MyListener myListener = new MyListener();
          ( (JButton) buttonsArr.get( 0 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 1 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 2 ) ).addActionListener( myListener );
          JPanel panel = new JPanel();
          panel.add( buttonsArr.get( 0 ) );
          panel.add( buttonsArr.get( 1 ) );
          panel.add( buttonsArr.get( 2 ) );
          f.getContentPane().add( BorderLayout.CENTER, panel );
          f.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
          f.setVisible( true );
     public static class MyListener implements ActionListener{
          public MyListener() {}
          public void actionPerformed( ActionEvent e ) {
               System.out.println( "hi!! " + e.getSource() );
               // I need to know a title of the button (which was clicked)...
}The output of the code is something like this:
hi! javax.swing.JButton[,140,5,60x25,alignmentX=0.0,alignmentY=0.5,
border=javax.swing.plaf.BorderUIResource$CompoundBorderUIResource@1ebcda2d,
flags=296,maximumSize=,minimumSize=,preferredSize=,defaultIcon=,disabledIcon=,
disabledSelectedIcon=,margin=javax.swing.plaf.InsetsUIResource[top=2,left=14,bottom=2,
right=14],paintBorder=true,paintFocus=true,pressedIcon=,rolloverEnabled=true,
rolloverIcon=,rolloverSelectedIcon=,selectedIcon=,text=first,defaultCapable=true]
I need this: "first" (from this part: "text=first" of the output above).
Does anyone know how can I get the "text" field from the e.getSource() ?

System.out.println( "hi!! " + ( (JButton) e.getSource() ).getText() );I think the problem is solved..If your need is to know the text of the button, yes.
In a real-world application, no.
In a RW application, a typical need is merely to know the "logical role" of the button (i.e., the button that validates the form, regardless of whether its text is "OK" or "Save", "Go",...). Text tends to vary much more than the structure of the UI over time.
In this case you can get the source's name (+getName()+), which will be the name that you've set to the button at UI construction time. Or you can compare the source for equality with either button ( +if evt.getSource()==okButton) {...}+ ).
All in all, I think the best solution is: don't use the same ActionListener for more than one action (+i.e.+ don't add the same ActionListener to all your buttons, which leads to a big if-then-else series in your actionPerformed() ).
Eventually, if you're listening to a single button's actions, whose text change over time (e.g. "pause"/"resume" in a VCR bar), I still think it's a bad idea to rely on the text of the button - instead, this text corresponds to a logical state (resp. playing/paused), it is more maintainable to base your logic on the state - which is more resilient to the evolutions of the UI (e.g. if you happen to use 2 toggle buttons instead of one single play/pause button).

Setting a Text field in adobe form non editable

Hi Experts,
I have generated a Adobe form using webdynpro java. I have couple text fields. They are binded with some values which a RFC returns. When I see the output These text fiels values which are populated from backend are editable. Can anyone suggest me how to make these text fields non editable.
Thanks,
Raj

Hi Raj,
You have to set the properties of these text field as readonly.
For this you have to select the text field ... Go to the Object Pallete.
There you will see three Tabs Field, Value and Binding.
You have to click on Value Tab and there you have select the Type as Read Only.
If you do not have Object Pallet open .. go to Menu Bar Window and Click Object
This will solve your problem.
Cheers
Satya

Corresponding text field coming automatically.

hi all
in my selection screen Material group and corresponding text is there.
this is a simple report program.
selection screen:::
matnr
text
my requirement is
if user select any matnr then the corresponding text field coming automatically.
but this text field is present in one text table.
pls help me.. what can i do.
thanks in advance.
indu

Hi....
Check this program...
selection-screen begin of block b1 with frame.
parameter: p_matnr like mara-matnr.
parameter: text like makt-maktx.
selection-screen end of block b1.
at selection-screen.
select maktx from makt into text where matnr = p_matnr.
endselect.
Now in output enter Material number and Press Enter....
Thanks,
Naveen.I

How can I program the text fields in my email forum to have rounded corners

How can I program the text fields in my email forum to have rounded off edges or corners.
this is the code im using.
// insert code here// insert code here// prepare email field
var email = sym.$("email")
email.html("Enter your Email: ");
inputEmail = $('<input />').attr({'type':'text', 'value':'', 'id':'email'});
inputEmail .css ('font-size', 14);
inputEmail .css ('width', 350);
inputEmail .css ('background-color', '#4e4e4e');
inputEmail .appendTo(email);
// prepare topic field
var topic = sym.$("topic");
topic.html("Topic: ");
inputTopic = $('<input />').attr({'type':'text', 'value':'', 'id':'topic'});
inputTopic .css ('font-size', 14);
inputTopic .css ('width', 350);
inputTopic .css ('background-color', '#4e4e4e');
inputTopic .appendTo(topic);
// prepare message field
var message = sym.$("message");
message.html("Message: ");
inputMessage = $('<textarea />').attr({'type':'textarea','rows':'10', 'cols': '25','value':'', 'id':'message'});
inputMessage .css ('font-family',"Arial,Helvtica,sans-serif");
inputMessage .css ('color',"#ffffff");
inputMessage .css ('font-size', 14);
inputMessage .css ('background-color', '#4e4e4e');
inputMessage .css ('box-shadow', '#4e4e4e');
inputMessage .css ('width', 350);
inputMessage .css ('height', 150);
inputMessage .appendTo(message);
var submitBtn = sym.$("btn");
submitBtn.html("Submit");
submitBtn.css("text-align", "center");
submitBtn.css("font-size",14);
submitBtn.css("font-weight","bold");
submitBtn.css("color","#ffffff");

Try this: inputEmail.css ('border-radius', '25px');
attachment
more details

How can i set predictive text to a foreign language

I'm new to apple and iPhones. I've got everything setup in English but I frequently want to send text and/or email messages in French. When I do this predictive text jumps in and changes things to what it thinks I want in English. e.g. if I type tous it predicts I want toys and inserts it accordingly. How can I set predictive text to a foreign language.
(p.s. my wife's iPad works fine as it has a button to press for alternative language but I don't see anything similar for iPhone)

Add the French keyboard.
Settings > General > Keyboard > Keyboards > Add > French

How can I set up cross fade to automatically trim files ?

How can I set up cross fade to automatically trim the two files to size when fading between them? Thanks

Hi, thanks for the reply. What I meant was that in Pro Tools, you can highlight an area between two tracks and crossfade. Then the files are exactly trimmed automatically so there is no excess overlap of the edges of both files. In Logic it seems to leave the overlap, and this can be a problem when you accidently click the wrong place and the underlying file is bought to the front, changing the crossfade area. I wish it to trim the excess so there is no danger of the lower file edges coming forward.

How Can I Set the Search Field in iTunes?

In applescript...
In another app - I have copied a song title to the clipboard...
Q: Now - How Can I Set the Search Field in iTunes to the clipboard contents?
Q: Also how can I also open the main library itunes window?

Hi Rev Dave,
Q: Now - How Can I Set the Search Field in iTunes to
the clipboard contents?
Unfortunately the only way I can think to achieve this involves the use of "UI Scripting". The other previous posters have given you the preferred method you should consider using. If you want to script iTunes so that you visually see the search take place in iTunes you'll need to use the method shown in the script I've posted below.
Q: Also how can I also open the main library itunes
window?
Cyclosaurus has given you the answer to this part of your question already.
Here is a script that (though ugly IMHO) should achieve what you are asking for:set theSearch to (the clipboard) as string
tell application "iTunes"
activate
set allPlaylists to playlists
repeat with aList in allPlaylists
if name of aList is not "Library" then
set view of front browser window to aList
exit repeat
end if
end repeat
set LibList to playlist "Library"
set view of front browser window to LibList
end tell
tell application "System Events"
tell process "iTunes"
if "iTunes" is not in name of windows or ¬
focused of window "iTunes" is false then ¬
keystroke "1" using command down
keystroke tab
keystroke theSearch
end tell
end tellIn order for the above script to work you need to have "Enable access for assistive devices" enabled in the "Universal Access" section of the "System Preferences" application.
If you have any further questions about the above script feel free to ask.
Hope this helps...
iBook G4 1GHz Mac OS X (10.4.3) 640 MB RAM

Can I set my Macbook to open automatically all video files with VLC?

I have some movies that I have download and they automatically open with quick time. But then the message error comes about because it can not open it!
Now my question is can i set the computer to open all Video with VLC?
I have a macbook Mac OX Lion 10.7.
Thank you

Choose any one of the files you want to have opened by VLC by clicking once on it (highlight it, don't open it).
Right/control click on it and choose Get info. Or press -i
In the Info dialog box, select the pop up menu under "Open with:"
Choose VLC from the list.
Click the "Change all" button just below. You may need to confirm this.
That should do it.

Hello, I can not use my text field in PS cc. I can drag a text box, but when I write something in, I can't see the letters!

Hello, I can not use my text field in PS cc. I can drag a text box, but when I write something in, I can't see the letters!

Opacity at 100?
Does the cursor move as you type?
Reset the tool by right clicking here to see if that is the remedy.

Can not set OARG.cstAllcAcc field value with CustomsGroups Object

Can not set OARG.cstAllcAcc field value with CustomsGroups Object, please open this field in this Object because it is a key field related to financial system.

I guess, it should work; instead of html:submit, try with button.

Can I set a text field to automatically type in caps when I have converted a form to fillable in ADO

Similar Messages

Maybe you are looking for