Can I set autoSubmit="true" and partial trigger in Application Def. Editor?

Hello Expert,
Can I set autoSubmit="true" and partial trigger or other properties through JHeadstart Application Definition Editor?
If I have changed the layout or add item though the Def. Editor, I have to regenerate and the manually modification
on jsff will be overridden. Any suggestion to solve this problem?
So far I know the page generation can be disabled, however, what if I have to regenerate the definition but want
to remain the manual modification in Jsff?
Thanks
Neon

Neon,
You can use the "Depends on Item" property in the application definition editor. You can set this property on an item, or an item region, region container.
The items that is specified as depends on item, will get autoSubmit="true" and the dependent items of region will get partial triggers that listen to the depends on item.
Even if you need settings you can't generate, there is no need to switch off generation of the entire page.
We never do this, we always specify custom templates for the bits and pieces of the page that we want to customize.
Have you read section 4.7 "Customizing Using Generator Templates" in JHeadstart Developer's Guide?
Steven Davelaar,
JHeadstart team.

Similar Messages

I can't set up time and date / no response or it s...

Hi guys
I hope You will help me.
I purchased nokia 5800 (second hand) for my girlfriend this christmas as a present and everything is fine apart 'time and date settings'.
When you going to 'setting' and try to select 'date and time' there is no reaction, if you trying open by clicking 'options' and than 'open' it appears straight away 'System error' message or if you trying do it from the home screen/desktop by clicking on the clock 'System error' message appears straight away.
It is very confusing and driving me mad as this is christmas gift and she can't set up time and date.
I've tried update software using Nokia Software Updater and nothing
I've restored factory setting and nothing as well.
Please help me
Thank You very much for Your time
Kind regards
Martin
Solved!
Go to Solution.

Hi monpar77
If you are using restore factory settings in "Phone management" due to UDP = User Data Preservation feature of this device that may not be sufficient and you may need to carry out a "hard reset" as detailed elsewhere in the forum.
Happy to have helped forum in a small way with a Support Ratio = 37.0

My wife and I have iPhones with 2 different iTune accounts and iCloud accounts, How can I set my Mac and iTunes up to be able to sync all as 1?.

My wife and I have iPhones with 2 different iTune accounts and iCloud accounts, How can I set my Mac and iTunes up to be able to sync all as 1?.

You can't merge two iTunes accounts.

I just bought my apple tv and it says that it can't set the date and time? How do i fix this?

I just bought my apple tv and it says that it can't set the date and time? How do i fix this?

Welcome to the Apple Community.
A number of users have encountered this problem, for existing users the problem has largely been resolved by restarting the Apple TV. However since you are a new user it would be wise to check that your settings are correct to begin with. Ensure the router allows access over port 123 (TCP) and that you are using the DNS settings provided by the ISP and not your own.

Can I move the Toolbox and Menu panels in Elements 12 Editor to suit my workflow?[was: Peter London]

Can I move the Toolbox and Menu panels in Elements 12 Editor to one side when the monitor (1920x1080, 16:9) is in the lanscape position, and to the bottom when the monitor is rotated to the vertical position, so that I can work on the largest image possible?

I think you can .
1. Use extended monitor.
2. Open Photoshop Elements. Make sure following option is checked:
Edit>Preferences>General: Allow Floating Documents in Expert Mode
3. Create a new floating document and drag it to the second monitor.
Start working on the first monitor(having PSE) with canvas on second monitor....
I hope this is what you wanted?

How can I set up a delayed analog trigger on PCI 6115 DAQ

I have an S-Series PCI 6115 DAQ which I’m running with Labview. I’m using it to measure signals from an acoustic emission sensor and two force transducers. I’d like to set up a delayed analog trigger which will start acquisition on all three channels a period of time after a selected channel’s voltage exceeds a threshold.
Currently I’m using the AI Config VI in line with the AI Start VI and AI Read VI to capture data after a analog hardware trigger occurs. A software trigger probably wouldn't work because I have to sample my data at 10MS/sec. My setup works fine for triggering without any delay or skip counts. However, if I set the delay or skip count in the additional trigger parameter field of the AI start VI, there is no effect, and the device still starts capturing data immediately after the trigger is received. What is the cause of this, and how can I get around it?
Also, is it possible to sample the channels of a PCI-6115 DAQ at different rates? Right now, I’m sampling all my channels at 10MS/sec and throwing away data on all channels except one. However, this seems relatively slow and eventually I would like to attempt pseudo-real time control using my data.

rpursley8 is right about needing to get the counters involved if you want a hardware timed delay in your application.
Concerning whether or not you can sample at different rate, check this document out.
Sampling Different Channels at Different Rates with NI-DAQmx
Otis
Training and Certification
Product Support Engineer
National Instruments

ADF BC: createInsert and partial trigger

I notice when i add a createInsert operation to my page and then the corresponding table, JDev will add a partialTrigger to the button.
I don't see why.
When i press the createInsert, the table should have the partialTrigger, not the createInsert button because the table should be refreshed in order to show the new row. But when i add the partialTrigger to the table, than it like an infinite loop. Table refreshes button, button refreshed table,...
It's resolved by removing the partialTrigger from the button but i am wondering why jdev does it?
I think it has something to do with the disabled state of the button but that does not make sense. THe same for the commit button. If you want everything to work with partialTriggers, then you have lots of buttons/tables linking to each other causing loops or does ADF notices that and takes care of it?

Hi,
I reproduce your case and I do not see any loop,
about your question that why the createInsert need the partialtrigger :
1-first of all it is because of the the disabled attribute which depends on the table
2- Second, the table row selection is automatically partial, I mean when you click on the row partially the selected row is determind as it is done partially there is not any way
for depended components on the table to notify about the state of the tree(changes of row or anything) so the depended component such as CreateInsert need to set the partial trigger.
3-why the table does not need the partialtrigger at the time of drag and drop, the answer is easy because the default button that you drop on the page is not partialSubmit, so why any other depended component like Table, must have the partialtrigger?? it is only needed when the button is partialSubmit,
I hope my answer is clear enough.
to conclude, there is not any mistake or bug from Oracle for sure.

How can we set a process chain to trigger the nodes w/o manual intervention

SDNers,
We have a Master PC which has the loading & activation of some Hierarchies.Wats happening is some of the hier activations are failing (we got track of the root cause as well) and the nodes below are not getting triggered automatically, eventhough they have been designed to get triggered irrespective of success or failure of this hierarchy activation. The chain prompts for the u2018Status change & trigger the following eventsu2019 opo-up and only when it was said u2018yesu2019, the subsequent node gets triggered in the chain. If this manual intervention was not there, the Chain gets struck at the activation node, whic is running in yellow status for long, though a short dump - error has already been thrown.
My query is how can we set a process chain not to anticipate the manual intervention of chnaging the status & trigger events pop-up

Hi ravi,
i'm not sure abt the query but what i got thru ur qustion is u have to automtaically go to the next load/step even the proceess chain fails in the step......
for that we have the same master meta chains with link of so many local chains...for this even if there are some interventions/fails in between the process chains it never gets stopped....
it goes to the next step and we'll work, analyse and finish the failed load manually....the next day it'll be
fine...
b4 to this make sure that there is no dependency for the previous loads....
And now the solution i found for this is in the process chain design itself.......
while giving the links itself we'll be getting the options as status RED,GREEN and RED(or)GREEN.....now if u got for the third option the event goes to the next step even it is unsuceesful....
rgds,
nkr.

How can I create software start and stop trigger in LabView using 6023E series DAQ card? I don't want to use the external trigger.

I am using 6023E DAQ card to collect the signals, such as AE, Force, Torque from the machine. I want to collect only some part of signal for example between start triger and stop trigger. I'd like to know how I can creat those triggers in LabView from one of the channels that I am acquiring at the same time. I found one or two library file that is only for start trigger. I know that this is availabe in some of DIAdem functions. Please let me know if you have done some example for this requirement.

If you are wanting to create a software trigger based on an analog input voltage in LabVIEW, there are several options. One suggestion would be to compare the voltage values from one input channel to a number within a loop. If the input voltage crosses that threshold (is greater than the number), have a case statement that will acquire data from the other channels. This would simulate a software start trigger in LabVIEW.

How can I set my date and time to ebay network time server?

In the system preferences I would like to set the date and time to ebay UK time?
I thought a quick google would be bring up the server and I can't find it.
At the bottom of every ebay page there is a link to official ebay time
But its not a live feed of time to get it to the second.
I want it to be accurate so that I can use applescript to snipe bargins.
Many Thanks
Matt

Just trying to go along the free route. I found Garage Buy This doesn't work to well but lets you create an applescript and enters the auction into ical. Then you can set ical to run the script once it gets closer to the time.
Ical only lets you set a time of a minute before the date. So you have to edit the script to add a Delay 59 to have it run 1 second before. From a few refreshes of the time page it looks like ebay time is a second behind, that could be easily be due to time to load the page. anyway i'll opt for a delay of 57secs and give that a try.

Since the last update, my apple tv can t set the hour and apple id is not recognize..

Hello,
since the last update, my apple tv can set the hour and doesn t recognize my apple id.
i try to set To change DHCP to manual and reverse it s the same..
i restore it on network twice and with itunes and the problem is not solve..

Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

How can I set Yahoo mail as my default mail application on Mac Mail?

I am trying to make Yahoo Mail (free version, not Yahoo mail Plus!) my default mail application. This would allow me to cick on any link sending e-mails and it will launch the yahoo mail application to send mail from there, obviously. For this to happen I need to open Mac "Mail > Preferences >" and choose "Default email reader" under the "General". I then choose the email application of my choice (Yahoo in my case). "GMail Notifier" for Google fans.
I am not able to find a Yahoo application mail in my application folder or on the Internet, and frankly speaking, Yahoo mail support absolutely suck, and getting a hold of them is nearly impossible! There is a free applet out there called "Yahoomailer" that might do the job, but either I am installing it wrong since when I download and click on it nothing happens, or it does not work properly on my machine. So, I am turning to the community to get some help with this issue. All I need is to know if there is a Yahoo mail app out there that can be installed on MAC and shows up on my Mail > Preferences > Default email reader.
Thank you,
I am using MAC OS X 10.8.2

My tools menu does not show "options" as a choice - any idea why? Thanks

I can't set up contacts and calendar for iCloud on my PC

I'm trying to set up iCloud so it'll sync my Mail, Contacts, and Calendar & Tasks between my Windo. However, the iCloud Control Panel won't let me set up the Contacts and Calendar & Tasks. When setting up, it asks me to shut down Outlook (which I do). Then it tells me that I need to restart Outlook with Mail enabled and that I need to add my iCloud account in order to add Contacts and Calendar & Tasks. I have no idea what the former means. I have added my iCloud account although what I REALLY want to sync is the Contacts and Calendar data from the e-mail I use Outlook for (which is also my Apple ID). I have Outlook 2010. Any idea why I'm getting this message and how I can set up iCloud?

Hi there bakingcountrygirl2011!
I have a couple of articles here that should help you get iCloud set up on your Windows machine. The first is about activating iCloud mail in Outlook, and can be found below:
iCloud: Set up iCloud Mail on your devices and computers
http://support.apple.com/kb/PH2621
And here are the steps you need to follow:
Set up iCloud Mail on Microsoft Outlook 2010 or Microsoft Outlook 2007
Open the iCloud Control Panel, select (to turn on) the Mail, Contacts, Calendars, & Tasks checkbox, then click Apply.
To open the iCloud Control Panel in Windows 8, move the pointer to the upper-right corner of the screen to show the Charms bar, click the Search charm, then click iCloud Control Panel on the left.
To open the iCloud Control Panel in Windows 7 or Windows Vista, choose Start menu > All Programs > iCloud > iCloud.
Your iCloud Mail account is displayed in the left column of Microsoft Outlook.
To view your iCloud Mail account in Microsoft Outlook, click the disclosure triangle to the left of your iCloud email account.
If you are still having issues with your contacts after following the instructions in that article, you will want to see this article, about troubleshooting sync issues with your iCloud contacts:
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/TS3998
You will also probably want to pay special attention to this particular part of that article:
Ensure the iCloud Outlook Add-in is active within Outlook.
For Outlook 2010, follow these steps to verify the iCloud Outlook Add-in is active:
Open Outlook 2010.
Click the File menu.
Click Options in the left panel of the Outlook window.
Click Add-Ins in the left panel of the Outlook Options window.
Look at the list of add-ins beneath "Active Application Add-Ins," and verify that the "iCloud Outlook Add-in" is listed
For Outlook 2007, follow these steps to verify the iCloud Outlook Add-in is active
Open Outlook 2007
From the Tools menu, choose Trust Center.
Select Add-ins from the left column.
Look at the list of add-ins beneath "Active Application Add-Ins," and verify that the "iCloud Outlook Add-in" is listed.
For additional information about managing Add-ins with Microsoft Outlook, see this Microsoft support document.
Hope that helps. Thanks for using the Apple Support Communities!
Regards,
Braden

Can you set a BREAKPOINT and step through it

Hello all,
How do set a breakpoint in the app so that one can step through it and no where it is failing and the value of the variables returned?
Thanks

If you are trying to debug server side PL/SQL program units, you could use DBMS_DEBUG.
http://download-west.oracle.com/docs/cd/B14117_01/appdev.101/b10802/d_debug.htm#996728

Can we set Print Quality and Page 'Fit in to paper' thrue AS

Hi All,
while taking Movieclip printout thru actionscipt, whatever text i used inside the Movieclip is get blurred. Moreover the print is not fit into the paper size (A4 size used).
Is there any setting available to change resolution while its get convert to bitmap and also is there any option to set "fit in to the paper size"
Here i am using this...
import flash.display.BitmapData;
var newBitmap:BitmapData = new BitmapData(myMC._width, myMC._height);
var tempMC:MovieClip = this;
var printFC:PrintJob = new PrintJob();
newBitmap.draw(myMC);
tempMC.createEmptyMovieClip("printMC", 1);
printMC.attachBitmap(newBitmap, 1);
printFC.start();
printFC.addPage(printMC, null, {printAsBitmap:true});
printFC.send();

I found the solution form a website !!!
I missed out to mention the parameter while attaching bitmap.
The correct code is...
printMC.attachBitmap(newBitmap, 1, "auto", true);
"auto" is for pixelSnapping
true is for smoothing
Thanks,

Can I set autoSubmit="true" and partial trigger in Application Def. Editor?

Similar Messages

Maybe you are looking for