Can i use pci-7352 to run 4 or 6 axis (motors)

can i use pci-7352 to run 4 or 6 axis (motors) if i am not using them same time

There is no ready-to-run solution for this. Of course you could switch all motor signals with external relays or with a switch matrix to the two sets of axis-signals that are available on the PCI-7352 but I wouldn't recommend doing this as this would be way more expensive and complicated than purchasing a PCI-7354 or a PCI-7356 that support for 4 and 6 axes respectively.
Best regards,
Jochen Klier
National Instruments Germany

Similar Messages

  • Can i use pci-7352 to run 4 or 6 axis (motors) if i am not using them same time

    can i use pci-7352 to run 4 or 6 axis (motors) if i am not using them same time. This is a stepper motor

    This is a duplicate posting. I have answered this question here.
    Jochen Klier
    National Instruments Germany

  • No ISA slot available in PC. How can I use PCI-85 Modbus Plus card with Lookout?

    My application is to communicate with two Modicon PLCs using Modicon's ModBus Plus (PCI based PCI-85) network card inside my PC, and using Lookout as an SCADA software. Since there is no ISA slot available in new PCs, I can not use Modicon's ISA-85 Modbus Plus networc card. But Lookout does not support PCI based PCI-85 card, how can I use PCI-85 card then, with Lookout? Why doesn't Lookout support it? I asked the following question from from the Modicon's representative about it:
    If I purchase Modbus Plus Driver Suite CD (SWMXDS001, 05, or 10 etc),will I be able to use Lookout SCADA software (by the way, it supports standard MB+ prtocol) for my application? If yes, can I use any version of an
    y of the ISA, PCI, or PCMCIA based MB+ card?
    His answer was:
    The Modbus Plus Driver Suite will talk to any version of card, PCMCIA, ISA, and PCI. The question now is will the SCADA package you are
    planning on using be able to talk to the Modbus Plus Driver Suite? You must contact National Instruments and ask them if they support Modbus Plus, and if
    they used the MB+ system developement kit to develop their product. Or if they wrote their own MB+ drivers, do they work with Modicon hardware?

    Hi,
    currently Lookout does not support the PCI-85 card. The only card supported for Modbus Plus is SA-85. Please see for further information:
    Where can I Find Drivers for Communicating to PLCs, RTUs, and Other Industrial Hardware?
    How to configure the SA-85 card for Modbus Plus
    Hope this helps
    Roland

  • Can you use Apple TV to run Ap Players on your TV

    I use the comcast xfinity player and the ABC player on my  to watch on-line content.  I also access their respective web site directly from the Mac desktop to watch contents on-line as I cant run them through on my HDMI cabapable TV as my PS3 has an incompatable operating system with the flash player to view those applications or web content on-line,
    Can I use Apple TV to run either the Aps through my TV or to directly access content from on-line sites?  (and yes, I know I can hook my mac to my tv directly via an HDMI cable, but it wont work with my stereo system and the audio is substandard)

    No, the copyright holders have too many restrictions on how you are allowed to distribut content.  So you can not stream copyrighted content over AirPlay, and ATV does not support flash.   You can only watch content on ATV that there is an app for on ATV.  i.e Netflix, Hulu, MBA, etc. etc. etc.  Sorry.

  • I want to create fillable PDF that can be used by many people running on both MAC and PC.  What Adobe product should I use?

    want to create fillable PDF that can be used by many people running on both MAC and PC.  What Adobe product should I use?

    Hans-Gunter
    Thanks so much.  I downloaded Acrobat XI.  It's been "extracting" for the past 30 minutes (even with a fast wi-fi).  Hope this is not a problem.
    Anne

  • Can i use PCI-1411 to trigger NI 5112 to capture YUV vdieo wave of DVD sync?

    I have a PCI-1411 ,i can use this card to trigger NI5112 to capture a line signal of CVBS output of DVD. And i can see in the graph just a line's wave. But it seems that PCI-1411 cannot trigger the YUV output.The wave display still moves quickly,not just a line signal. Can i use PCI-1411 to trigger NI5112 to capture YUV output sync?

    A similar question to this one was answered before by an NI employee with an example program attached. Please search the discussion furoms with keywords "5112" and "imaq" and you will find a discussion on triggering a 5112 with an IMAQ board.

  • Can i use PCI 6115 both as an output and input device simultaneosuly?

    I would like to use PCI 6115 data acquisition card from National Instruments for both generating a signal and then configure it for receiving the generated signal. I am using MATLAB program.I ran a program and it shows no error. But the results are not what I expected. Any help will be appreciated

    Hello,
    The PCI-6115 can receive and generate signals. It can actually do both at the same time. However, this depends on how it is programmed. Since you are using MATLAB, I do not know what I can do to help. Are you making calls to NIDAQ32.dll?
    Please post any follow questions or maybe some more information on what you are seeing.
    Best regards,
    Justin T.

  • How can i use PCIe 1433 and basler line camera to construct image and pocess it?

    hello! every one ,I am new to machine vision.i have two problems to ask.First,how can i use line camera and 1433 to acquire 2-D image?second,if i want to pocess the 1-D signal ,how can i do it ?i expect for your answer ,thank you!

    What you are trying to do is not something you can easily do in a forum, but I can give you the basics.
    You have a CameraLink frame Grabber (PCIe 1433) and a LineScan Camera
    The framegrabber needs to be configured to understand how to communicate with the camera.  You need a file from the camera vendor.  This file might already be installed.  You can use MAX to check if it is, under Devices/IMAQ.
    Assuming you can get to the point where you can communicate with the camera, you need to configure your acquisition.
    Since the camera is a line scan camera, it captures image data one pixel ine at a time.  You will need to configure the frame grabber to determine how many lines per image you want.  The low limit is usually 1, and the high limit is either based on the framegrabber's internal memory, or that of the computer.
    If you are using labview, you will need to open a sessing to the camera, acquire the image(s), and then close the session when you are done.
    Once the image(s) are captured, you can performa analysis using the NI Vision Toolkit.
    Sorry, but there is no way to condense years into one post.
    Machine Vision, Robotics, Embedded Systems, Surveillance
    www.movimed.com - Custom Imaging Solutions

  • Most users can not use TEST PANELS or run EXE built vi's?

    On any fresh install of NI-DAQ, the System Administrator and the first user logged in afterwards can use the Test Panels... button in the "Measurement & Automation Explorer" as well as run the Standalone programs made by Application Builder (LabView 7.1)...all other users can not use the Test Panels... or run the Built-vi's that shows up with plenty of error code 21, "an external subroutine required for execution could not be found", and it seems to be vi's that are called by the vi's we use, like one step away. I have set the permissions to all the related files to FULL as well as hacked the registry's HKeyLocalMachine->Software->NI... as well as the CurrentControlSet->...->DAQCARD... all to full control.
    Since the Administrator and the frist user can run the programs it is definitely not a case of missing software, but just permission rights. Please help to get the other users productive as well!

    Hi, they have not got the application builder license here...

  • Can I use Remote Desktop to run Windows software from my Mac

    Here's what I want to do:
    1) Set up a small office LAN with an Apple Xserve as the file server; clients are mostly iMacs but a few PCs.
    2) There are one or two software apps I need that exist only in the Windows world (such as a good document comparison software like DeltaView).
    3) I want to have one dedicated PC for my one or two essential Windows apps and then run Remote Desktop Connection on my Mac client to launch the Windows app on the PC client and use it to edit or otherwise manipulate a data file stored on the server.
    Is this possible?

    Thanks for your prompt reply.
    OK, maybe I'm missing something basic but then why would I ever want to run Windows network in my office? The bugbear about Macs is that there is certain Windows software for which there is no good Mac equivalent. But you are telling me that as long as I have a couple of Windows boxes, I can run my Windows software on them through my Mac, even though the data files are stored on an separate box (an Xserve).
    Now, for the $64 question -- is it possible to set up a network in such a way that I could use RDC on my PowerBook in, say, Chicago to run the software installed on the Windows box and in turn to open and manipulate the files stored on the Xserve in my office, halfway across the world in Abu Dhabi? Would this be a particularly difficult configuration?
    Thanks,
    DXB Law

  • Can you use VMware Fusion to run a windows 7 VM on an external hard drive

    I have the latest version of Mountain Lion running on a MacBook Air 11' with 4GB or Ram and an SSD of 128GB.  I have purchased the latest version of VMWare's Fusion Product.
    Since it takes up so much room to run on the SSD drive, I was wondering if it was possible to install a Windows 7 instance (I have the ultimate version with ISO already sitting on the Msc and External Drive) and access it from the Mac to run my windows programs.
    So in short:
    MacBook 11"  Latest Version of Mountain Lion  Latest version of Fusion
    Want to run Windows 7 VM on an external hard drive rather than installing it on my internal drive.
    Can this be done?  If so, how?
    Thank you so much for reading this and hopefully someone can help.
    mkkoenig

    My external drive is FAT 32 and my MacBook recognizes it, however Fusion does not.  So if I buy a brand new external hard drive, format from scratch FAT 32, use Fusion to create that VM, I should be able to install Win 7 on the external drive and use it via Fusion?
    Sorry if I am dense, just trying to make sure I understand. :-)

  • Can I use two operative systems running in  my iMac G5?

    A few weeks ago I bought a digital videocamera, Canon MV830i, it's an easy and a cheap cam.
    Well, now I've filmed some stuffs and I want it over to my iMac. I put in the DV-cable, with firewire, into the cam and the computer. Nothing is happening. I try to open up iMovie but it says ther is no videocamera connected. And then I read on the box, which the videocamera were delivered in, and it says that I need to have an earlier operative system than Mac OS X Tiger, 10.4.3, that I have.
    So that i wonder is if I can download or buy an earlier operative system, ex. Panther 10.3, and still have my Tiger operative system in the computer.
    Do you knoe what I'm going to do? Please help me!
    Thank You Max Landegren, Stockholm, Sweden

    And then I read on the box,
    which the videocamera were delivered in, and it says
    that I need to have an earlier operative system than
    Mac OS X Tiger, 10.4.3, that I have.
    Max, it's unlikely the camera requires Panther. The box was probably printed before Tiger was available. If the camera ran in Panther, mostly likely it will run in Tiger too. That's how these things usually work.
    Before going to all the trouble to locate and install Panther, I suggest you try to get your camera to work in Tiger. iMovie Help has some tips about troubleshooting FireWire, as well as Apple's online information for iMovie. Both are available in iMovie's Help menu.
    Karl

  • Can i use PCIe X-Fi in PCIe x16 sl

    I'm wondering if i could fit a PCIe x X-Fi soundcard into PCIe x6 slot?
    The PCI slot on my ASUS P5Q Deluxe board is in rather crappy place and i was thinking of getting PCIe version of X-Fi and place it all the way below in a PCIe x6 slot. Is that posible or does it strictly have to be a x slot (which is also physically smaller).

    It was said somewhere that it can work in both type of slots however some motherboards reserve the x6 slots for video cards only.
    I have ASUS Maximus Extreme motherboard and my Titanium works in the x slot and the x6 slot both.

  • Can I use labview 7.1 run time in windows 98?

    I am going on update a too old test system. I use labview 7.1,but I find I can't install labview 7.1 runtime in windows 98.
    so should I use labview 6.1 instead of it?
    Sonic
    Diffrent Strokes for Different Folks

    Why cnt you update both ?!
    - Partha
    LabVIEW - Wires that catch bugs!

  • How can i use flash player in running movies online?

    fash player is installed in my pc but movies are not being played?

    http://forums.adobe.com/thread/1195540

Maybe you are looking for

  • Problem with Pages update

    Has anyone had a problem opening pages documents and it telling you that you need to update to the new pages but you already have? 

  • RunTime Exception in DrpDownByKey

    Runtime exception - com.sap.tc.webdynpro.progmodel.context.ContextException: MappedAttributeInfo(First_CompView.Color.VALUESET): must not modify the datatype of a mapped attribute Code for DropDownByIndex---- IWDAttributeInfo attrInfo = wdContext.nod

  • ID Server and Policy Agent for AS .. is secure?

    Hello there, I have a question. Quite critical question, concerning iPlanetDirectoryPro cookie. If I've got it right, this cookie contains SSO Token. And the SSO token can be used with identity server to obtain any SSO assetion. I've experimentaly co

  • Duplicate (sidecar) RAW & JPG files in Organiser

    Hello, I usually store both RAW and a small JPG file for each photo I take using a Canon EOS 7D. When these are imported into Lightroom 4.4, Lightroom only shows one image, reporting that the associated JPG is a 'sidecar' image. When imported into Ph

  • Minimizing page downloads

    I know this is a basic question, but I'm ignorant! I am creating a website using primarily Fireworks, Flash and Frontpage. I have a banner and buttons on the side that will appear on each page. Do browsers automatically display the banner and buttons