Can Inbound IDOC create a BP(Business partner) In SAP CRM system

Hi
Req:
Contractor data is transfered from ERP system to CRM using Message type HRMD_ABA with ALE Distribution Model in place.
Inbound IDOC is Successfully Posted  when checked in WE05  in SAP CRM System.
Question :
1. Can  an INBOUND Idoc create  BP automatically  or is there  need of Configuration or Any custom program .
Appreciate Your Response
Bhanu Polsani
Edited by: Bhanu Polsani on Oct 4, 2011 6:10 PM
Edited by: Bhanu Polsani on Oct 4, 2011 6:16 PM

You can maintain two different address for the business agreements (can be treated as mailing address for the printed invoice)but you can not maintain more than one standard address for BP as any given time.
Regards,
Sanjoy

Similar Messages

  • How To upload business partner into sap crm using xif Adapter by XML File

    HI Guru's,
                 I got Requirement to upload the business partner information into sap crm system using xif adapters from xml file , please give  imformation how can achive this .
    Regards,
    Naveen Kumar MS

    Dear Naveen,
    please see the information given in note 448742 General notes on CRM external interfaces!
    Hope you can find the information!
    Regards, Gerhard

  • How to stop the replication of a particular business partner from sap crm to sap ecc - BDOC

    Hi experts,
    I need to know the procedure to stop replicating a particular BP #1234(example) from CRM to ECC. I don't want this BP to be replicated in ECC as in ECC this BP will not be maintained.
    BDOC failure:
    In my current scenario BDOCs are failing with error like "No BP exist". Since this BP #1234 itself is not present in ECC, the error is obvious.
    This BP #1234 is defined in CRM as an Org. Unit. We don't maintain Org. Unit in ECC. All other BP are saved under this BP(#1234).
    Issue:
    So whenever a new BP(example #ABC) is created, the BUPA_REL type BDOC fails with error "BP with number #1234 doesnot exist.
    I don't want this to happen. So what i found if we can stop the replication of this particular BP #1234, then if we make any change to the relation BP, this error should not come.
    Please help me to resolve this BDOC error.
    regards,
    Vicky

    Hi Ganesh,
    1st we create a Organization structure through tcode-PPOSA_CRM.
    A business Partner is created which represent the Organization Structure partner ID.
    2nd we create a BP through and do a Org. assignment in tcode - PPOSA_CRM.
    A business Partner is created which represent the any customer partner ID.
    As soon as you do an assignment,assigning the customer BP to the org BP, a BUPA_REL BDoc flow but it fails.
    Error we get in the BDoc: "BP XXXX doesnot exist"
    Reason: Since this Org BP is not present in ECC, the BDoc fails in CRM.
    Possible Resolution 1:
    1. I created this Org. BP in ECC through CRMM_BUPA_MAP
    2. The BP got created.
    3.Then i tried to assign a new customer BP to Org BP to check if the issue is resolved, but we get another type of error 'BP is not defined as internal Org. Unit".
    I don't know how to define BP as an internal Org. Unit in ECC?
    Can you please help me in this.
    Possible Resolution 2:
    If i can stop this particular BUPA_REL BDoc which contains this Org.unit BP, from getting replicated, means when i assign the customer BP to Org.Unit BP, BUPA_REL should not be triggered.
    I don't know if this is possible or not, but if this is possible, i would consider this a last option to resolve this issue.
    Please let me know if this helps you to understand the issue i am facing?
    regards,
    Vicky

  • Synchronize Business Partner from SAP CRM - SAP ERP

    Hi experts,
    I would like to synchronize our BPs from the CRM into our SAP ERP System.
    What Ive done until now:
    1. start initial load "bupa_main" from "CRM" to "OTLP"
    2. check if everything is correct with R3AM1 - after ~ 1 hour -> done (green)
    3. I check with transaction BP in the ERP System if dates were transported - no
    4. I check the outbound queue of the CRM "SMQ1" - it seems ok
    5. Now Ive checked the inbound queue of our ERP Sytem "SMQ2" - but there is nothing - that means no queues available
    What did I do wrong.
    Ive checked both rfc connections with "remote login" and it works out. But only if my "RFCUSER" is on usertype "DIALOG". In the document C71: CRM Connectivity - the RFCUSER Usertype should be"Communication data"? Maybe thats the problem?
    Kind regards.
    Chris
    Edited by: blaxus on Dec 16, 2010 12:23 PM

    HI,
    Yes, RFCUSER dialog is not correct.
    Change to system or service.
    And that Tcode smw01 show?
    Denis

  • Mass Update of Business Partner Data in CRM

    Hi,
    I would like to know how I can perform a mass update of business partner data in CRM and then have this replicated into R/3.
    I have found notes 802804, 876602, 859632 but these only apply to CRM 5.0 and we are currently working on CRM 4.0.  Does anyone know of anything similar which exists in CRM 4.0?
    I have checked other posts and found help files links like the one below but is this only on CRM 5.0?  (http://help.sap.com/saphelp_crm50/helpdata/en/3c/9b56fae6c7424cafcdf17370399812/frameset.htm )
    Has anyone used the tx. MASS in CRM?
    Also our volume update levels is as high as 300,000 record and updating in CRM and replicating into R/3 through the middleware is causing performance problems.
    Does anyone have any tips on the best approach for this?  Many thanks.
    Regards
    JoJo

    Mass not available in 4.0, could write your own LSMW routine but you still will create bdocs for updates so not sure how that will improve your performance.

  • Create or Update Business Partner in CRM  ?

    Dear Folks  ,
    Scenario is to Create or update Business partner in CRM from  thirdparty system  via PI
    It would be great if you could  clarify the following
    Hope we have BAPI to create and Update Business partner in CRM system but my question is
    1. Can we use any predelivered PI content - Message Interfaces - as proxies ( Server proxies ) to create BP from system ?
    2. Same interface will work for Update as well ? 
             IF so what is that content ?  where to find for our PI System ?
    3. Can we use the same way for Client proxies as well  when we want to update the business partner ?
    4. What are the inbound and outbound Message Interfaces are available ?
    Any help will be highly appreciated
    Thanks.,
    Shiva

    Hi Ravi ,
    I think that i am not described my question properly    , Say i have CRM system where i have to create BP for this input comes from external system (forget about the system ) , Here i want to use Proxy (Server proxy ) which helps me create Business partner in CRM system .
    Here my question is If sap delivers the  Inbound interface ( where server proxy already generated by SAP) , which i will use to create BP ?
    Can we do in this way ?
    Thanks
    Shiva

  • BP: How to hide "Validity Period" on screen Create a new Business Partner

    Hi,
    On screen Create a new Business Partner, I want to hide field Validity Period
    -> Please tell me how to do in Customizing
    Thanks and Best regards
    Ms.Minh

    Hi,
    For each BP role, you can control the field status in configuration under BP-Role Settings. Please check whether validity period is available for field configuration or not.
    Regards
    Prasad AV

  • How to create a new business partner for notification with function module?

    Hello,
    I got a problem when I want to create a new Notification with its businiss partner (BAPI_ALM_NOTIF_CREATE). I can't find the proper way to create the new business partner. Anyone offer some help?
    Thanks a lot!
    Morgan

    when I look at the function you can transfer the partner in NOTIFPARTNR table.
    You must already have defined the appropiate partnerroll in customizing for you're businesspartner
    or do you have another problem with this function ?

  • Extracting Business Partner information from CRM to XI

    What is the best approach to extract Business Partner information from CRM to XI

    Hi,
    by IDOCs of course
    you can create them just like I did:
    /people/michal.krawczyk2/blog/2006/11/14/xipi-data-type-enhancements-standard-business-partner
    (you jut need to change from proxy to ALE - another module)
    but bisically it's a standard to generate
    a business partner record and send it as an IDOC from CRM
    Regards,
    michal

  • Business Partner distribution from  CRM-PI-MDM using XIF and PI Proxy

    Hi,
    I would like to know if there is any step-by-step documentation on configuration of ABAP proxy with XIF in SAP CRM for distribution of Business partner information to MDM system. There is XI Content for this but there is no documentation which highlights configuration of proxy.
    I did looked at following links but was looking for any other document with details.
    http://help.sap.com/saphelp_crm50/helpdata/en/42/b6efbe82103120e10000000a1553f7/frameset.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/406efa7e-388a-2910-f9b8-81913b0ca57f
    (Talks about using IDoc)
    Thanks,
    Divyakumar Jain

    HI,
    Have checked the blog
    /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
    Here you will get the steps to generate the client proxy in R/3.
    Or You can configure the proxy settings as per below blog
    You need to Setup the HTTP connection for ABAP Proxy,
    http://help.sap.com/saphelp_nw70/helpdata/en/da/11df3a9b10355ae10000000a11405a/frameset.htm
    Thanks
    Swarup

  • Business partner replication from CRM to ECC

    Hi everyone,
        In case of vendor master data after business partner creation  in CRM  the vendor Master Data should get created in ECC
    system also at the moment i dont have an idea whether it will get replicated to ecc are not can any one help me how to acheive this requirement.

    >>Messages sent when I test corresponding proxy interface, but not sent when I try to create or modify BP. What else should I check to find out the reason of this problem?
    BP Creation will be done be a standard SAP program may be a Function Module. Change Pointer or User Exist should be added to this BP Creation Function Module in order to trigger the Proxy Class with BP data.
    Though am not an ABAP expert, I guess the changesshould be done to the standard flow to trigger Proxy Class also..
    ~SaNv...

  • Updating business partner addresses in CRM

    Hi,
    I Need to build a interface to update business partner addresses in CRM and assign it to a address usage. I can not find a suitable FM/BAPI for this purpose. Please advise me how to accomplish this.

    Hi,
    Where do you start to activate or configure Business Address Services in R/3 Business partners. Any links to user guides or startup documents will be greatly helpful.
    Thanks very much
    Cheers!
    Padi

  • Instructions for installing Business Package for SAP CRM 7.0

    We hae CRM 7.0 and we have a Netweaver 7.0 (2004s) portal.  Can someone please either point me to the documentation or explain to me how to install the Business Package for SAP CRM on the portal?
    Thanks
    Angie

    need to go to service marketplace and go to Support Packages and Patches/My Companys Applciation Components/SAP CRM/SAP CRM 7.0/Entry by Component/CRM Portal Content and the business packages are there.

  • Problem in Creating Business Partner in E-REC system.

    Hi Dear Friends,
                                We are using SAP E-REC as External Instance . Problem is when we move Master data from ECC to E-REC infotype 1001 ( Sub type A 0008 ) is not moving so that Business Partner also not getting Created . I checked the INBOUND and OUTBOUND of IDOC there is no issue .   I tried with report HRALXSYNC where i could see (All Objects > Central Persons > Without Partner) when i tried to Repair i ended with  warning  message '
    Form of address 0001 does not exist and  Form of address 0002 does not exist
    .  However i got SAP note " 1412534 - Message "Form of address & does not exist" when creating BP"
    I couldn't understand what is this form of address ? how to maintain this ? if it is mandatory how it has created  BP for remaining users?  
    Also i tried with RHINTE00.10,20,30 programs , Can anyone help me to solve this issue ?
    And some time when i use PFAL Central Person itself not created . . how to fix this ? ?
    Thank you friends

    Hello Saket,
    The error "Personal Address does not exist" (AM013) indicates a DB inconsistancy. That is the address number in table BUT020 does not have data in table ADRC. Please check whether this is your case.
    If you can recreate such error in a non-modified SAP enverionment, please raise a customer message to SAP.
    To correct the inconsistancies, please use the reports in note 865271 and note 1096330.
    Best regards,
    Maggie

  • Inbound Idoc Create/Change Purchase Order

    Hi All,
    I have to do a inbound Idoc scenario for create as well as change Purchase Order.
    Which is the IDoc type for Create/Change purchase order.
    I went through this form found that ORDERS05 can be used but I am not sure this can be used for both create as well change Purchase Order.
    If ORDERS05 can be used then which is Process code,Function Module and Message type for both create and change Purchase order.
    I also found that IDoc type PORDCR102 can be used for  create Purchase order and PORDCH02 can be used for change Purchase order,but i don't want to use two Idoc types.
    Please suggest.
    Thanks in advance.
    Regards,
    John

    Hi John,
    For creating a IDoc for PO, whenever a PO is created/Changed, it has to be configured in Parter Profile(WE20) for a particular Partner in Outbound Paramtrs tab.
    Give ORDERS05 in Message Type and select the line & go to Display.
    In the screen which appears , choose tab Message Control and give the Process code
    ME10 - Creation of PO
    ME11 - Changes to PO & check the Change Message.
    Give respective Output Message Type & Application(VF) for PO.
    Create Output types for a vendor in T.Code MN04, else take help from MM Consultant.
    Create a PO & save. Then make some changes in Po & again save.
    Now IDoc will be created while saving the Po & IDocs will be created whenver you make changes to PO and saving it.
    Hope It helps.
    Regards,
    Anbalagan

Maybe you are looking for

  • Windows 8.1 Pro Activation Error Code: 0xC004C003

    I bought a HP Desktop - 110-a04 last month and registered with HP but last week I realized that my Windows 8.1 Pro is not activated yet. When I tried to activate the Windows it gives me an error which is  "The activation server determined the specifi

  • Database - Combo box

    Hi,i'am facing a problem when i'am adding the values retrived from a query into the combo box. 1)when the query is "order by" only few items are getting added to the list and the rest of the elements below this are not displayed. 2)when i remove the

  • Is there a place where I can get a Power Book G4 serviced?

    I am looking for a place to get service on my Power Book G4, any suggestions?

  • Changing standard output from Text to XML customization?

    Hi Team, We wanted to get an excel output for a standard reports Accounts Payables Trial Balance, we changed the output from Text to XML. We did not attach a data definition or template definition ..we just wanted to see the XML output.. We got an er

  • Why not use Jsp for  control in MVC2 ?

    hi i am rajendra , i am preparing interview FAQ, so please give me my Que. Ans. 1) we are using servlet for control in MVC2 Module,then why we can not use Jsp for control in mvc2 2) if we used jsp for control in mvc2 then what is disadvantage compare