Can LaserJet 4100tn be connected to ePrint?

I am trying to enable my LaserJet 4100tn to be connected to Web Services by following the instructions on HPconnected website, but when I get to the part where I need to get the EWS and click the HP Web Services tab, I cannot find this tab.
Does this printer even capable of ePrint? It is a network printer though not wireless.
Thank you for your thoughts and ideas!

Hi laserjet4200,
To get your issue more exposure, I would suggest posting it in the commercial forums since the Laserjet 400tn is a commercial product. You can do this at http://h30499.www3.hp.com/t5/HP-Designjet-ePrint-and-Share/bd-p/hp_eprint_and_share#.U9vZiihOPNw
The support page for your product may be helpful in the meantime: HP LaserJet 4100 Printer Series.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Similar Messages

  • Laserjet 200 m276nw cannot connect to eprint

    I have just installed a new Laserjet 200 M276nw printer.  It connects to my network and I can print just fine.  I tried to connect to eprint and it gives me a "cannot cnnect to internet" I also cannot check for printer updates as it cannot connect to the internet.  Is there a port in the firewall that needs to be opened to allow it to connect to the internet?  I have lgged into the web app using the ip address and tried to enabe web services and it comes up with an error "cannot connect to the internet".  I am not using a proxy server.

    Hi @Demetri,
    I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
    If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Can you see ink levels from Eprint center for the OfficeJet 7500A/E910

    Can You monitor ink levels from eprint center for the OfficeJet 7500A/E910?
    This question was solved.
    View Solution.

    Hello Raimonds,
    To answer your question, you are not able to check your ink levels from ePrint Center. The only thing that you can do in ePrint Center is monitor the status of your recent print jobs that you send via ePrint and monitor the status of connection of your printer to the ePrint Servers.
    If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • Airport Express Base Station and HP Laserjet 1020 printer connected

    Dear all,
    I have a Laptop (PC) Sony Vaio PCG-Z1XSP and an Airport Express Base Station which work perfectly together (internet access and I-tunes). I recently bought a printer HP Laserjet 1020 and connected it to the Airport Express USB soket. I managed to make it work and print a couple of times, but as soon as I turn off the printer or the computer or Airport Express, the next time I want to print, it doesn't work anymore.
    The Airport Admin Utility recognises the printer (I can see it listed). I have updated the Airport Express software to the Firmware version 6.3 as well as downloaded the latest driver available on HP's website for my printer. I've also substituted the USB cable. Can anybody help me here? Thank you very much and best regards.

    Hallo everybody,
    Thanks for all the answers. I have contacted HP's chat online and gone through the problem with 3 different technicians. I've tried a lot myself too. The issue was partially solved by restarting the printer spooler, i.e. stop, then start and then restart it.
    However after I was so happy that the printer worked, I turn off everything. When I turn on again, it was not working anymore. Then I tried to see by exclusion what the problem is, I had to restart the Hardwar I don't know how many times.
    Conclusion:
    1. The USB cable must be plugged into the airport express before turning on anything.
    2. Turn on the printer first.
    3. Turn on the airport express and the computer.
    4. If you try to print it doesn't work, even if you reset the airport express through the airport express utility software. The printer is recognized and appears in it though.
    5. Disconnect the USB cable from the airport express and connect it to the PC directly.
    6. Print a document.
    7. Disconnect the cable and reconnect it to the airport express.
    8. Now you should be able to print wireless. You may need to reset the airport expresst with the utility softwar, but I managed to print without having to do it.
    9. The pörinter works even if you turn off and on again the computer, or you suspend the windows session and restart it, or if you put it in standby and restart it.
    10. The printer works even if you turn off the airport express and the computer, or the airport express alone and restart them/it.
    11. The printer doens't work anymore if you turn it off and onn again. In such a case you have to plug in/out as discribeb above.
    Solution: Leave the printer always on, or make the plug in/out every morning when you start the computer and print one page direclty before being able to print wireless.
    Does anybody have a solution to this problem? I mean it prints, but it is annoying to plug in/out every day, no?
    HP's technician says that it is not a recommanded solution the HP Laserjet 1020 with the airport express, since the printer works on a host based server basis... I mean it is easy to say that, but one expects to buy a printer that works always and not to have to plug in/out everyday, restart spooler and so on.
    Can anybody comment or suggest anything I can do to avoid this? Thank you and I hope this helps others too.

  • HP 8500 Printer and Connection to eprint server

    Refurbished Printer: HP Officejet Pro 8500 Premium A910 n (Changes status from new to refurbished 02-17-2011)
    ISP: ATT DSL
    Modem/Router: 2wire new from Best Buy. It is white with ATT logo on it. Is using latest firmware.
    Network: ethernet
    The printer downloaded and installed a firmware update after initialization. So it is connected to the internet.
    It then tried to register to the eprint server and said it cannot connect to eprint server.
    The printer functions normally in every way except it will not register to eprint server.
    Numerous calls and hours with HP Support rebooting, resetting and everything else under the sun have done nothing.
    I tried setting IP and DSN addresses per all the suggestions in these forums and nothing works.
    Could there be an issue with the HP Sever? Does it really exist? Are there compatibility issues with 2wire router.
    ATT did remote session on my computer and could find nothing they could do. They were able to plot a test page remotely.
    Any suggestions or help would be greatly appreciated. Thanks.
    NEW INFORMATION (02-11-2011):
    I noticed today while looking at the EWS that the printer SSID is not the same as the router, but it was grayed out. Does this matter for ethernet? If so how do I change it? I do not think this matters for ethernet.
    NEW INFORMATION (02-12-2011):
    The support team at 2wire have given me procedure to completely open all in and out traffice to the printer. They said if this does not work then the problem is with the eprint server. I will try this on Monday, but I expect there is a communication problem between the printer and the eprint server that has nothing to with anything at my location or my ISP. Is there any way to check the server this printer is trying to connect to? Where is it? Is it operational? If not, is it rerouting properly to an operational server? The printer must be trying to access a particlar IP address or DNS to establish communication.
    NEW INFORMATION (02-14-2011):
    Per the instructions from 2wire support team I opened all ports and allowed all services then turned the printer off and on. It did not work. The printer will not connect to the HP eprint server. So the problem is with the HP eprint server. This printer is programmed to look somewhere for a server to connect to. Where is it? Is it operational? Why will not allow a connection? HP the ball is in your court. What can we do?
    I have ATT DSL at work and Charter Cable service at home. The problem is the same for both locations and ISP's. Is there anyone out there has connected that has ATT DSL or Charter Cable? If so what are your settings?
    NEW COMMENT (02-15-2011)
    Can anyone at HP tell me why the printer will connect to the HP Server and download the firmware update, but will not connect to the HP Server to register to eprint? It all seems to be on HP's side. When will we get a fix?
    NEW COMMENT (02-16-2011)
    The model number is blank in the engineering menu and the printer diagnositc page. If this is an issue can it be added with a firmware update? Do I need to get money back for this one and buy a fully configure one in a local store? Maybe the blank model number is throwing all the other information out of place that is being sent to the server. Can the server be updated to accept blank model numbers?
    POSSIBLE SOURCE OF PROBLEM - SOLUTION PENDING (02-16-2011)
    I JUST LOOKED ON THE BACK OF MY PRINTER. IT HAS A REMANUFACTURED STICKER ON IT.
    It appears that the missing model number on the remanufacturered units is the reason why it will not connect to the eprint server. Print out the printer diagnostic page and see if the model number is blank.
    HP is working on a fix.
    SOLUTION- (02-22-2011)
    I UPGRADED MY ORDER FROM REFURBISHED TO NEW REPLACEMENT. THE NEW REPLACEMENT CONNECTED THE FIRST TIME TO EMPRINT SERVER - NO PROBLEMS. I HAD TO PAY FOR A NEW ONE AND THEY WILL CREDIT MY CARD WHEN THEY GET THE REFURBISHED ONE BACK.
    LESSON LEARNED - IF YOU HAVE PRINTER WITH BLANK MODEL NUMBER YOU WILL NOT ABLE TO CONNECT TO EPRINT NO MATTER WHAT YOU DO!
    Thanks if anyone can help.
    This question was solved.
    View Solution.

    Try setting a fixed IP/DNS…hopefully you haven’t tried that yet.  (The problem is most likely w/how therouter and the printer are communicating…setting the fixed IP/Manua DNS should fix it. )          If previous steps didn’t help, you may need to set a fixed IP address/DNS Server on your printer.
    Setting a fixed IP address/DNS Server for your printer may resolve web services connectivity issues that can occur on some networks with some routers.  Note:  This may be particularly helpful with networks using DSL/VIOS routers.   
    Please read the entire set of instructions through completely before trying them.  You should not attempt these on your own if you don't understand networking basics.  Most of us have a "techie" buddy/friend/family member...if you're not comfortable this might be a good time to call him/her, or contact HP support.  
    Before you begin, we recommend you first remove Web Services from your printer.  (See the previous section for where to find this on your printer.)   Removing web services will remove your printer from your HPePrintCenter.com account (if you have previously set up an account and added it).  When you re-enable web services after completing these steps you will have a new ePrint email address and need to add your printer to your ePC account again. 
    Setting a manual IP address/DNS Server on your web-connected printer:
    Print a Network Configuration Page from the printer front panel.  On some printers this will be under Wireless>Wireless Settings, and on other models use the “Print Report” option from the Wireless status screen accessed from the wireless icon on the printer home screen.   Note the printer's IP address that is listed in the IPv4 section of the report.  On most printers you can also see the printer’s IP address from the Wireless menu, or on the Wireless status screen.  
    Type that IP address into your browser address bar (where you would normally type a web page URL) and hit enter - this will load the printer's internal settings page (also known as an Embedded Web Server, or EWS)
    Select the “Network” or “Networking” tab (the label varies depending on printer model) from the tabs along the top of the screen in the EWS
    Depending on your printer model, the next step(s) will vary:
    Select the “IPv4” option from along the left side of the Networking screen   
    or
    Select the “Networking” option from the left side of the screen
    Then select the “Network Address (IP)” option from the left side of the screen
    The screen you end up on should be the “IP Address Configuration” screen.  That screen allows you to choose an Automatic or Manual (i.e., fixed) IP address for your printer, as well as Subnet Mask and Default Gateway values.   You will use this screen to set a Manual IP address for your printer.  
    To continue:
    Select the radio button next to “Manual IP”
    Select the “Suggest a Manual IP Address” option below the IP address fields.  The Manual IP address fields will automatically populate with suggested values.
    Select the “Manual DNS Server” radio button in the DNS Address Configuration section
    Enter the address just entered in the “Manual Default Gateway” into the “Manual Preferred DNS Server” field.  Leave the “Manual Alternate DNS Server” entry blank.
    Carefully double-check the values you entered to make sure they are all correct. 
    Click 'Apply'
    Save any open documents and close any web browsers on any computers
    Turn off the printer and unplug the router. 
    Plug in the router, wait for it to start up and for status lights to settle down (approximately a minute at least), then turn on the printer.
    If you removed web services from your printer before starting this process, after the printer has connected to your network, re-enable web services on your device and add your printer to your account on HPePrintCenter. 
    If you did not remove web services before setting a manual IP address and are still having connection issues, remove and re-add web services.  
    In some cases you might need to add the printer to your computer’s Printer/My Printers folder again, after you set the new fixed IP address.   If you have problems printing to your printer, simply use the option to add a printer, select the Networked printer type, and complete the add printer wizard.  You will not need to reinstall any printer software on your computer.  
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • Can I access printer connected to windows PC on my airport network

    I have an airport extreme network with 3 MACs and 1 Dell laptop (yes I had to get a used Dell to run Mural Creator and TileCreator). Three printers (a dye sublimation printer, a Canon i9900, and an HP laserjet 3380) are connected to my airport extreme base station using a USB hub. I can print to any of them from all computers. The Dell is in my studio and I connected a HP Photosmart printer to it. How do I print to it from the MACs?

    Hi Stephen!
    You're not providing us much information about your problem. Is the printer still connected to the Windows computer or do you have it connected to the Mac? Or are you trying to print across a network from the Mac to the Windows computer? What model printer? What have you tried? What doesn't work?
    Do this...
    First, while in the Finder on your Mac go to the Help menu and search for an answer there.
    Next, if you don't find an answer come back here to this forum and use the Search feature in the upper right corner of each page to search the older posts. Mac and Windows printing questions are plentiful here and just about every answer has probably been given.
    Finally, if you get stuck post a new question that specifically details how your computers are set up with your printer, what you've tried and what you're needing to know or have answered.
    Since you're already here and looking for information I'll also point you to this excellent information posted by iFelix, a regular visitor to this forum <http://www.ifelix.co.uk/tech/index.html>.
    Hope this helps and good luck! bill
    1 GHz Powerbook G4   Mac OS X (10.4.8)  

  • Unable to connect to eprint server

    Though it had been working fine, my photosmart b210 can no longer connect to eprint server. iPad and iPhone can not find printer. Wireless network diagnostic by b210 shows everything fine.

    Thanks for the reply and sorry for the trouble. Check out this document which goes out troubleshooting the iPad no finding the printer. There is two different sections, one for AirPrint and one for the Home & Biz app.
    'The Printer is not Found,' 'No Printers Found,' or 'Printer is Offline' Message Displays on the iPa...
    Be sure to response so I know if this resolved your issue. Good luck!
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • HP Laserjet P 2055d - Connect to the network

    Does anyne know if it is possible to modify a Laserjet P2055d to connect to the network?
    I think that the 2055dn is the network model, can a network card be added?

    It has a USB connection in back.  What you may need is a wireless USB Print Server.  Just search the web.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Can not create the connection in the enrironment!!

    hello,every one:
    please see the following code:
              Environment *env = Environment::createEnvironment(Environment::OBJECT);
              Connection *conn = env->createConnection(userName,password,connectString);
    try
    //use the conn
              catch (SQLException &ex)
                   env->terminateConnection(conn);
                   Environment::terminateEnvironment(env);
                   throw;//re-throw
              env->terminateConnection(conn);
              Environment::terminateEnvironment(env);
              Environment *ev = Environment::createEnvironment(Environment::OBJECT);
    //the program stopped here,display i can not create the new connection
              Connection *cn = ev->createConnection(userName,password,connectString);
              ev->terminateConnection(cn);
              Environment::terminateEnvironment(ev);
    I have terminated the connection and the environment,then why I can not create the
    connection in the new environment?
    I have tried several times,if you connect the same database as the former,then it
    does not work,but if you connect a new database ,it can create the new connection!
    plus:I don't want to use conection pool .
    Can I have some method to solve the problem?
    Please help me!
    Thanks a lot in advance!
    tony from China

    Hi Tony,
    This similar sample works perfectly fine for me. Can you
    retry with this?
    #include <iostream>
    #include <occi.h>
    using namespace std;
    using namespace oracle::occi;
    int main()
            Environment *env = Environment::createEnvironment(Environment::OBJECT);
            Connection *conn = env->createConnection("scott","tiger","inst1");
            try
            //use the conn
            catch (SQLException &ex)
                    env->terminateConnection(conn);
                    Environment::terminateEnvironment(env);
                    cout<<ex.getMessage();
            env->terminateConnection(conn);
            Environment::terminateEnvironment(env);
            Connection *cn;
            Environment *ev;
            try{
            ev = Environment::createEnvironment(Environment::OBJECT);
            cn = ev->createConnection("scott","tiger","inst1");
            catch (SQLException &ex)
                    ev->terminateConnection(cn);
                    Environment::terminateEnvironment(ev);
                    cout<<ex.getMessage();
            ev->terminateConnection(cn);
            Environment::terminateEnvironment(ev);
    }Rgds
    Amogh

  • How can I use VPN connection to access my Outlook email?

    My company doesn't support iPhone's so I can't get any help from them -- here is my problem:
    We run Outlook 2003 and they won't tell me the server name for Outlook. I have been able to connect to our Cisco VPN and access internal webpages, etc. Is there anyway I can use this VPN connection to retrieve my Outlook email?
    Or is there anyway I can identify the server name I need to allow the iphone to connect to my Outlook?
    Any help would be much appreciated.

    Yes, it is possible to connect via VPN. However,if IT hasn't set up ActiveSync on the internal Exchange server, this won't work anyway.
    The server name for your Exchange server is in the configuration of Outlook, so you can find it and use that to connect. But that doesn't mean that things are set up correctly to have this work.
    To find your server name, (this is for Outlook 2007), Tools->Options and double-click on the account under the Email tab. The server name is next to "Microsoft Exchange server" on that screen.

  • Can anyone help me connect my Macbook Air to a SAMSUNG TV.  When I follow the basic instructions (Thunderbolt to HDMI connection) the screen on my computer goes grey and an error message appears inviting me to press any button to restart th

    Can anyone help me connect my Macbook Air to a SAMSUNG TV.  When I follow the basic instructions (Thunderbolt to HDMI connection) the screen on my computer goes grey and an error message appears inviting me to press any button to restart the Macbook.  When I do this nothing happens.  Only when I disconnect the computer from the TV does the Macbook allow me to login. The TV does not receive any signal from the Macbook even though I know the HDI port works fine.  Any ideas what I'm doing wrong?  Do I need to enable something on the Macbook?

    An update...
    I downloaded Apple's (rather large!) list of software updates today, and I was finally able to recognize my iPod again. I did a restore using the iPod updater from 06-2006, and all seemed to work OK. (I'm afraid to try the new one again!)
    Then I tried to re-load my music library from iTunes, and got stuck. It froze up after a while and wouldn't go any further.
    When I disconnected my iPod from my computer, I find 2 podcasts and nothing else, though iTunes told me it had transferred 600+ songs. Those 2 podcasts do play fine, and the basic iPod software all seems to be intact.
    So -- anyone get through this connection problem and have any ideas to share??
    iMac Mac OS X (10.4.7)

  • Buletooth is not working in ipod touch 4g. When i want to connect my i pod touch with my friend ipod touch same 4g we can not able to connect.

    Buletooth is not working in ipod touch 4g. When i want to connect my i pod touch with my friend ipod touch same 4g we can not able to connect.

    The BT profiles on the iPod do not support direct iPod-to-iPod use.  There are apps that support peer-to-peer gaming between iPods and maybe transfer like for photos.  Also see:
    iPhone, iPad, iPod touch: Supported Bluetooth profiles

  • I have an Iphone 4s and i can't make a connection to my mac and other devices via bluetooth! Why is this a problem and how can i repair it?

    I have an Iphone 4s and i can't make a connection to my mac and other devices via bluetooth! Why is this a problem and how can i repair it?

    "I have an Iphone 4s and i can't make a connection to my mac and other devices via bluetooth! ":
    That is correct.
    "Why is this a problem and how can i repair it?"
    Becasue this has never been a feature of iphone/ipod/ipad.  There is nothing to repair.

  • Can I install 'Cisco connect' software on more than one PC in the network?

    Can I install 'Cisco connect' software on more than one PC in the network? Do multiple installs conflict? Who did try this before?

    yes you can
    SAP

  • Sorry, we can't seem to connect to the SharePoint Store. Try again in a bit.

    hello
    I'm having trouble connecting to SP store,
    I'm sure that I've done the configuration correctly, I used this https://technet.microsoft.com/en-us/library/fp161236(v=office.15).aspx for configuration
    ULS shows the following:
    03/19/2015 10:41:04.76 w3wp.exe (0x1E28) 0x1F9C SharePoint Foundation App Marketplace ahnhh Medium Sending Request to Office.com with the following URL:http://office.microsoft.com/en-in/store/config15 e435f49c-983e-707d-00de-3bb087aaf7dc
    03/19/2015 10:41:04.83 w3wp.exe (0x1E28) 0x1F9C SharePoint Foundation App Marketplace aep7f Unexpected Request to office.com with the following URL:http://office.microsoft.com/en-in/store/config15 caused an exception. System.Net.WebException: The remote server returned an error: (404) Not Found. at System.Net.HttpWebRequest.GetResponse() at Microsoft.SharePoint.Marketplace.OfficeProxy.OfficeProxy.SendWebRequest(String url, Boolean autoRedirect, String userIP, String postBody, String contentType, Encoding encoding, String jobRunIdLogPrefix) e435f49c-983e-707d-00de-3bb087aaf7dc
    03/19/2015 10:41:04.83 w3wp.exe (0x1E28) 0x1F9C SharePoint Foundation App Marketplace agdhz Unexpected Response from office.com was null or its HTTP status code was not 'OK'. Actual status code: 'InternalServerError' e435f49c-983e-707d-00de-3bb087aaf7dc
    03/19/2015 10:41:04.83 w3wp.exe (0x1E28) 0x1F9C SharePoint Foundation General ajlz0 High Getting Error Message for Exception Microsoft.SharePoint.SPException: Sorry, we can't seem to connect to the SharePoint Store. Try again in a bit. at Microsoft.SharePoint.Marketplace.OfficeProxy.OfficeProxy.GetConfigProperties(Dictionary`2& configProperties) at Microsoft.SharePoint.Marketplace.OfficeProxy.OfficeServiceUrls.Init() at Microsoft.SharePoint.Marketplace.OfficeProxy.OfficeServiceUrls.GetUrlFromProperty(String key) at Microsoft.SharePoint.Marketplace.OfficeProxy.OfficeProxy.MakeRequestMarkets(String userIp) at Microsoft.SharePoint.Marketplace.OfficeProxy.OfficeProxy.GetMarkets(String userDefaultBillingMarket, String userDefaultContentMarket, String userIP, List`1& markets, Boolean& validDefault) at Microsoft.SharePoint.ApplicationPages.StorefrontBase.GetOfficeMarkets(HttpRequest request, List`1& markets, Boolean& validDefaults) at Microsoft.SharePoint.ApplicationPages.StorefrontBase.TaskGetOfficeMarkets() at Microsoft.SharePoint.ApplicationPages.StorefrontBase.TryRunTask(TryGetOutput taskMethod) e435f49c-983e-707d-00de-3bb087aaf7dc
    03/19/2015 10:41:04.83 w3wp.exe (0x1E28) 0x1F9C SharePoint Foundation App Marketplace aep7g High An exception was thrown while running task 'GetOfficeMarkets'. Microsoft.SharePoint.SPException: Sorry, we can't seem to connect to the SharePoint Store. Try again in a bit. at Microsoft.SharePoint.Marketplace.OfficeProxy.OfficeProxy.GetConfigProperties(Dictionary`2& configProperties) at Microsoft.SharePoint.Marketplace.OfficeProxy.OfficeServiceUrls.Init() at Microsoft.SharePoint.Marketplace.OfficeProxy.OfficeServiceUrls.GetUrlFromProperty(String key) at Microsoft.SharePoint.Marketplace.OfficeProxy.OfficeProxy.MakeRequestMarkets(String userIp) at Microsoft.SharePoint.Marketplace.OfficeProxy.OfficeProxy.GetMarkets(String userDefaultBillingMarket, String userDefaultContentMarket, String userIP, List`1& markets, Boolean& validDefault) at Microsoft.SharePoint.ApplicationPages.StorefrontBase.GetOfficeMarkets(HttpRequest request, List`1& markets, Boolean& validDefaults) at Microsoft.SharePoint.ApplicationPages.StorefrontBase.TaskGetOfficeMarkets() at Microsoft.SharePoint.ApplicationPages.StorefrontBase.TryRunTask(TryGetOutput taskMethod) e435f49c-983e-707d-00de-3bb087aaf7dcO
    I reviewed a lot of posts but none of them fixed my issue
    my network admin gave the SP server full internet access
    when I try to open http://office.microsoft.com/en-in/store/config15 from the ULS I get
    Sorry, the page you're looking for can't be found.
    You may have clicked an old link or the page may have moved.
    when I try to open http://officeclient.microsoft.com/ from the TechNet guide
    I get error 404 page not found
    but I can open this https://office.microsoft.com/config15
    I tried setting (Set-SPAppStoreConfiguration) to all the above links then IIS reset each time .. still same problem
    I tried deactivating-activating (Apps that require accessible internet facing endpoints) from CA and then IIS reset .. same problem
    it is not my first time configuring app store
    I configured it 2 months ago on a different server and its running fine, I didn't face any problems
    ideas ?

    Hi,
    Thank you for your sharing! It will be beneficial to others in this forum who meet the same issue in the future.
    Thanks,
    Wendy
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

Maybe you are looking for