Disabling IPv6 seems to solve AEBS connection drop problem

As I posted earlier, I have had (like many others) a lot of problem with my Aiport ExtremeN base station. Connection was dropping every 20 minutes or so, for ethernet as well as Airport. I know it's not my DSL connection, I have used a NetGear WRT300N with no issue whatsoever in over a year.
I was really frustrated with the 180€ spent on the AEBS and about to try downgrading to earlier 7.1.1 firmware when I tried to switch the default IPv6 setting ("Tunnel") to "Local link only" (sorry if the translation is not accurate, my Airport Utility is in french).
3 days now with not a single connection dropout or AEBS reboot !
Can't explain why that is, but it works for me with the 7.2.1 firmware and Mac OS X 10.4.10 with last updates.
I thought I'd share and see if anyone has had the same experience (or can explain why !).

Glad I could help
I thought this was worth having a topic not buried into the forums.
Funny, now that I have found this, the Google search for "IPv6 AEBS" gives quite instructing results raising security issues :
http://arstechnica.com/journals/apple.ars/2007/2/14/7063
http://www.karppinen.fi/2007/04/17/turning-a-feature-into-a-flaw/
{quote}If you don't block incoming IPv6 sessions, you can actually connect to a Mac sitting behind the Airport Extreme from the outside, using SSH or FTP over IPv6, assuming those services are enabled. Long story short, you've lost your first line of defense on your home network for IPv6-enabled servers on your Macs.{quote}
Now I am warned about it !

Similar Messages

  • 10.5.2 failed to fix wireless connection dropping problem

    10.5.2 did not fix wireless connection dropping problem. I lose wireless connection whenever my MBP restarts or wake up from sleep in the building where I am and have to retype password about 10 times a day. I had not had this problem when I used Tiger. Everyone who has upgraded to Leopard or has it installed on their Mac is experiencing the same problem. Is there any solution or trick to resolve this problem? Thank you.
    Message was edited by: FrenchQuarter
    Message was edited by: FrenchQuarter

    Amularya,
    Please read the post I made in this thread earlier. No less than a dozen solutions are offered in the link I provided for wireless issues. Troubleshooting wireless issues requires individual attention because of the plethora of issues which can't be tested for. So please start a new topic thread here:
    http://discussions.apple.com/forum.jspa?forumID=1225&start=0
    So you can get a wider audience, and won't confuse the original poster with solutions that don't apply to them.
    There literally hundreds of different WiFi adapters.
    Dozens of different virus and firewall combinations.
    Possibilities for damaged WiFi cards and routers, as well as routers whose firmware is not to spec with the latest wireless standard.
    To top it off, bad RAM, hard disk being too full, and bad preference, cache or or logfiles can make various aspects of the operating system misbehave, and/or even the directory leading to those files.
    Until each person starts their own thread looking for solution individually, chances are they won't find one. Yes, 10.5.2 addresses WiFi for some people. Obviously it doesn't for everyone. The point is, there are some people, like myself who have never had a WiFi issue either with Intel or PowerPC Macs that they couldn't resolve without a little bit of troubleshooting. I'm happy to help you walk through it, but only if you start your own thread asking for help.

  • [SOLVED] WiFi connection drops

    Hey guys,
    I'm having some trouble with my WiFi connection lately as it tends to drop the connection every like 2-10 mins.
    It is not directly linked to any specific action, it just happens while browsing the web, watching a video or chatting.
    It's definitely not hardware related either as I do not have any connection losses when running windows on the same laptop (Dell Latitude E4300).
    lspci: 0c:00.0 Network controller: Intel Corporation WiFi Link 5100
    iwconfig: wlan0     IEEE 802.11abgn  ESSID:"****" 
              Mode:Managed  Frequency:2.422 GHz  Access Point: 00:1C:28:1C:D6:8A   
              Bit Rate=54 Mb/s   Tx-Power=15 dBm   
              Retry  long limit:7   RTS thr:off   Fragment thr:off
              Power Management:off
              Link Quality=61/70  Signal level=-49 dBm 
              Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
              Tx excessive retries:0  Invalid misc:14   Missed beacon:0
    Is this some known bug or is anyone else having the same problem? I couldn't find anything specifically similar to my problem on the forums and the rest of the web but maybe you guys know how to fix this?!
    Cheers
    Tobi
    Last edited by zoryfl (2012-02-20 17:32:38)

    masutu wrote:
    You can try out to load the module with
    modprobe iwlwifi 11n_disable=1 swcrypto=1
    or, to make it permanent, create a file /etc/modprobe.d/iwlwifi.conf containing
    #/etc/modprobe.d/iwlwifi.conf
    options iwlwifi 11n_disable=1 swcrypto=1
    That did it for me (i had the same problems: "wlan0: deauthenticating from 00:11:22:33:44:55 by local choice (reason=3)"). Don't know, if both parameters are needed, wasn't patient enough for testing.
    Big maustu! that did the job for me as well.
    This problem may be related to iwlwifi and some adsl routers. Everything was ok for me until we changed internet provider. The new provider (Fastweb, italy). placed their own router. Since then, my connection drops every 15 minutes or so and then it hangs. I have to restart network in order to reconnect.
    I tried disabling networmanager and connecting with wpa_supplicant and wpa_supplicant.conf and fiddling with the file templates but the problem persisted.
    I did pacman -Syu after we got the new router. Just to verify that it is the new router causing the problem I downgraded iwlwifi to previous version and the problem persisted. I didn't bother downgrading the kernel though...
    Booting the same pc with another distro that loads iwlagn everything is ok. Another pc with ubuntu that uses iwl3945 is also fine. The problem seems to be just with iwlwifi, my network card and that f...g router which I have not access to.
    My network card is Intel WiFi Link 5300.
    The logs in case it really is a problem with iwlwifi and someone know how to deal with it.
    Feb 5 14:34:38 localhost NetworkManager[574]: <info> (wlan0): bringing up device.
    Feb 5 14:34:38 localhost NetworkManager[574]: <info> WiFi hardware radio set enabled
    Feb 5 14:34:38 localhost NetworkManager[574]: <info> WiFi now enabled by radio killswitch
    Feb 5 14:34:38 localhost NetworkManager[574]: <info> (wlan0): bringing up device.
    Feb 5 14:34:38 localhost kernel: [ 7642.175703] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
    Feb 5 14:34:38 localhost kernel: [ 7642.176099] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0
    Feb 5 14:34:38 localhost NetworkManager[574]: <info> (wlan0): supplicant interface state: starting -> ready
    Feb 5 14:34:38 localhost NetworkManager[574]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
    Feb 5 14:34:38 localhost NetworkManager[574]: <info> (wlan0): supplicant interface state: ready -> inactive
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Auto-activating connection 'FASTWEB-1-XqkFmfh2na6e'.
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Activation (wlan0) starting connection 'FASTWEB-1-XqkFmfh2na6e'
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Activation (wlan0/wireless): access point 'FASTWEB-1-XqkFmfh2na6e' has security, but secrets are required.
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Activation (wlan0/wireless): connection 'FASTWEB-1-XqkFmfh2na6e' has security, and secrets exist. No new secrets needed.
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Config: added 'ssid' value 'FASTWEB-1-XqkFmfh2na6e'
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Config: added 'scan_ssid' value '1'
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Config: added 'psk' value '<omitted>'
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Config: set interface ap_scan to 1
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> (wlan0): supplicant interface state: inactive -> scanning
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> (wlan0): supplicant interface state: scanning -> associating
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> (wlan0): supplicant interface state: associating -> 4-way handshake
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> (wlan0): supplicant interface state: 4-way handshake -> group handshake
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> (wlan0): supplicant interface state: group handshake -> completed
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'FASTWEB-1-XqkFmfh2na6e'.
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds)
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> dhcpcd started with pid 6079
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> Activation (wlan0) Beginning IP6 addrconf.
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
    Feb 5 14:34:45 localhost dhcpcd[6079]: version 5.2.12 starting
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> (wlan0): DHCPv4 state changed nbi -> preinit
    Feb 5 14:34:45 localhost dhcpcd[6079]: wlan0: rebinding lease of 192.168.1.128
    Feb 5 14:34:45 localhost dhcpcd[6079]: wlan0: acknowledged 192.168.1.128 from 192.168.1.254
    Feb 5 14:34:45 localhost dhcpcd[6079]: wlan0: leased 192.168.1.128 for 1800 seconds
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> (wlan0): DHCPv4 state changed preinit -> reboot
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled...
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started...
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> address 192.168.1.128
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> prefix 24 (255.255.255.0)
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> gateway 192.168.1.254
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> hostname 'pabhost'
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> nameserver '62.101.93.101'
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> nameserver '83.103.25.250'
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> domain name 'fastwebnet.it'
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete.
    Feb 5 14:35:05 localhost NetworkManager[574]: <info> (wlan0): IP6 addrconf timed out or failed.
    Feb 5 14:35:05 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) scheduled...
    Feb 5 14:35:05 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) started...
    Feb 5 14:35:05 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) scheduled...
    Feb 5 14:35:05 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) complete.
    Feb 5 14:35:05 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
    Feb 5 14:35:06 localhost NetworkManager[574]: <info> (wlan0): writing resolv.conf to /usr/sbin/resolvconf
    Feb 5 14:35:06 localhost NetworkManager[574]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0]
    Feb 5 14:35:06 localhost NetworkManager[574]: <info> Policy set 'FASTWEB-1-XqkFmfh2na6e' (wlan0) as default for IPv4 routing and DNS.
    Feb 5 14:35:06 localhost NetworkManager[574]: <info> Activation (wlan0) successful, device activated.
    Feb 5 14:35:06 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
    Feb 5 14:35:06 localhost dbus[548]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
    Feb 5 14:35:06 localhost dbus[548]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
    Feb 5 14:49:46 localhost dhcpcd[6079]: wlan0: renewing lease of 192.168.1.128
    Feb 5 14:49:46 localhost dhcpcd[6079]: wlan0: acknowledged 192.168.1.128 from 192.168.1.254
    Feb 5 14:49:46 localhost dhcpcd[6079]: wlan0: leased 192.168.1.128 for 1800 seconds
    Feb 5 14:49:46 localhost NetworkManager[574]: <info> (wlan0): DHCPv4 state changed reboot -> renew
    Feb 5 14:49:46 localhost NetworkManager[574]: <info> address 192.168.1.128
    Feb 5 14:49:46 localhost NetworkManager[574]: <info> prefix 24 (255.255.255.0)
    Feb 5 14:49:46 localhost NetworkManager[574]: <info> gateway 192.168.1.254
    Feb 5 14:49:46 localhost NetworkManager[574]: <info> hostname 'pabhost'
    Feb 5 14:49:46 localhost NetworkManager[574]: <info> nameserver '62.101.93.101'
    Feb 5 14:49:46 localhost NetworkManager[574]: <info> nameserver '83.103.25.250'
    Feb 5 14:49:46 localhost NetworkManager[574]: <info> domain name 'fastwebnet.it'
    Feb 5 14:49:46 localhost dbus[548]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
    Feb 5 14:49:46 localhost dbus[548]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
    Feb 5 15:04:46 localhost dhcpcd[6079]: wlan0: renewing lease of 192.168.1.128
    Feb 5 15:09:57 localhost NetworkManager[574]: <info> (wlan0): device state change: activated -> unavailable (reason 'none') [100 20 0]
    Feb 5 15:09:57 localhost NetworkManager[574]: <info> (wlan0): deactivating device (reason 'none') [0]
    Feb 5 15:09:57 localhost dhcpcd[6079]: received SIGTERM, stopping
    Feb 5 15:09:57 localhost dhcpcd[6079]: wlan0: removing interface
    Feb 5 15:09:57 localhost NetworkManager[574]: <info> (wlan0): canceled DHCP transaction, DHCP client pid 6079
    Feb 5 15:09:57 localhost NetworkManager[574]: <info> (wlan0): removing resolv.conf from /usr/sbin/resolvconf
    Feb 5 15:09:57 localhost dbus[548]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
    Feb 5 15:09:57 localhost dbus[548]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
    Feb 5 15:09:57 localhost NetworkManager[574]: <info> (wlan0): taking down device.
    Feb 5 15:09:57 localhost kernel: [ 9761.463858] cfg80211: Calling CRDA to update world regulatory domain
    Feb 5 15:09:57 localhost NetworkManager[574]: <info> WiFi hardware radio set disabled
    Feb 5 15:09:57 localhost NetworkManager[574]: <info> WiFi now disabled by radio killswitch
    Feb 5 15:09:57 localhost NetworkManager[574]: <warn> (pid 6079) unhandled DHCP event for interface wlan0

  • Do I need to drop Mozilla since they can't seem to solve the Adobe Flash problem?

    I have followed every step suggested to fix Adobe Flash crashing problem. Is the real solution to just drop Mozilla and switch to Chrome? Seem Adobe Flash works just fine there...

    By the way, it would be useful if you could mention which settings you have changed. The headline suggestions for working around Flash problems usually include the following:
    (1) Disable protected mode (Win Vista and Win 7 only)
    See this support article from Adobe under the heading "Last Resort": [http://forums.adobe.com/message/4468493#TemporaryWorkaround Adobe Forums: How do I troubleshoot Flash Player's protected mode for Firefox?]
    (2) Disable hardware graphics acceleration in Firefox and in Flash
    (A) In Firefox, un-check the box here and restart:
    orange Firefox button ''or'' classic Tools menu > Options > Advanced > General > "Use hardware acceleration when available"
    (B) In Flash, see this support article from Adobe: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues
    (3) Check for and resolve conflicts with Firefox add-ons (e.g., using Safe Mode or a clean profile)
    (4) For display issues with scrolling, disable Smooth Scrolling and Autoscrolling here:
    orange Firefox button ''or'' classic Tools menu > Options > Advanced > General

  • Nothing seems to solve my MacBook Pro problem 'Could not sign in.Please Check your network connection and try again'

    On old MacBook Pro Version 10.6.8 downloaded Facetime from the Mac Store as instructed but error loging in says 'Could not sign in.Please Check your network connection and try again'.
    I have follwed all these discussion fixes with DNS settings 8.8.8.8 and 8.8.4.4 and refreshing everything but nothing works.
    Help!
    I have also logged out of my other laptop and closed my phones Facetime.

    Hi KateD14!
    I have an article here that addresses this sign in issue with FaceTime and may have some troubleshooting steps to help you resolve this issue:
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Resolution
    Try the following:
    Ensure that you have an active Internet connection.
    Verify that you are using a valid Apple ID at appleid.apple.com. You can also create an Apple ID or reset your password from this website. Other things you should confirm while logged into appleid.apple.com:
    Confirm that the email addresse(s) for your Apple ID has been verified.
    Check for miss-types of the email address
    Check the spelling of the email address
    Check that all letters are lower case
    Make sure that special characters are correct, e.g. no commas (,) where there is supposed to be full stops (.), etc.
    Note You may experience issues if your email address is associated with more than one Apple ID. If you have multiple Apple IDs, log in to appleid.apple.com with each Apple ID and confirm that each email address you wish to use for FaceTime or Messages is associated with only a single Apple ID.
    Make sure the date, time, and time zone are set correctly in Data & Time preferences, in System Preferences. Tip: Enable "Set date and time automatically" in Date & Time preferences to automatically keep this information accurate.
    If third-party firewall or port filtering software is installed, it needs to be configured to allow connections to apple.com, verisign.com and verisign.net. A list of ports required for using FaceTime and Messages is in Using FaceTime and iMessage behind a firewall. Please consult this article for further help configuring firewalls and Internet security software.
    If your /private/etc/hosts file has been modified, make sure that it is not interfering with communications to apple.com, verisign.com or verisign.net servers. Note: Some third-party software installers may modify the /private/etc/hosts file without alerting you. Instructions about how to check and resolve issues with a /private/etc/hosts file are in the "Blocked by configuration: (Mac OS X/Windows)" section of iTunes: Advanced iTunes Store troubleshooting
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • VW Iphone 4s bluetooth connection drop problem, is there a solution or do apple not care

    Many people are finding their Iphone 4S drops connection with their VW (Passat etc) integrated bluetooth hands free system after working fine for 5, 10, 20 minutes. The only way to reconnect is to switch the car off or turn the Iphone bluetooth off & back on.
    This is a dangerous fault and it appears that both Apple & VW have no solution (or are ignoring as they have already sold you a phone & a car).

    VW UK (unofficial information) have admitted that their bluetooth system in cars produced prior to 2012 has a
    compatibility problem with the Iphone 4S.
    This is due to that bluetooth system being developed prior to the launch of the Iphone 4S.
    VW cars produced in 2012 have a different bluetooth system that works OK with the Iphone 4S.
    As the bluetooth systems are different we are told there is no update software for pre 2012 cars & it is unlikely that
    there will be any update in the future.
    We have checked this theory as we have 2011 & 2012 VW Passats in our fleet & the drivers of the 2012 cars
    have no problems with their 4S bluetooth, the drivers of the 2011 cars all have drop out problems.
    The best we can hope for is that Apple acknowledge the problem that they have created (as it is not a VW only issue)
    & bring out an update for the 4S that makes its bluetooth as reliable as the Iphone 4.

  • How to solve the wifi dropping problem on Att UVerse.

    Today with aid from others on the forums and help from apple I figured out how to stop the problem where your iPad will drop wifi while your using it.
    Wat was wrong before:
    While surfing the web my wifi would disconnect, and I would have to go to settings>wifi and turn It off and then back on, this would happen every two to three minutes.
    YouTube videos would load very fast and about half way would stop and need to buffer.
    When streaming pandora, it would only be be able to play one song, before needing to restart the Internet.
    My router:
    I have a homeportal 3000 router through AT&T
    http://www.convergedigest.com/images/articles/v12n140-2wire.jpg
    First you will need to know your account password for Uverse.
    On the side of the router it will tell you system password, key, and Mac ID, at the top it will say for more info visit and there will be a number separated by some periods.
    Go to that link, (on either your iPad or any computer)
    When you get there you should see the name of your router and how it's performing.
    At the top there will be four tabs, click on settings.
    Six more tabs will pop up below the two tabs, click LAN.
    Below the six tabs, another six tabs will appear, click wireless.
    Scroll down and find security.
    Under authentication type, change it to "WPA2-PSK (AES)"
    Scroll down to the bottom and click save, it should then ask you for your password. NOTE: this is your uverse password, not the password on your router.
    There should be a green box that says you were successful.
    I've been going five hours now and havn't had one disconnect.
    Thanks and hope this helps.

    Thanks, this has been driving me crazy on both my MacBook and iPhone. It was dropping my wifi every few seconds! Changed the Authentication Type to WPA2-PSK (AES) and wow! It's been at least 2 entire minutes without dropping!

  • WRT54G vers 7 connection drop problem

    I've bought this router a week ago and sometimes in 10 minutes he dissapear out the wireless list... Sometimes it is in 2 hours and sometimes in few minutes.. I updated my FW to 7.00.4 But the problem stays..
    In games or MSN I log out then and 30 seconds later the wireless router is again in the wireless list and I must log back in.. Or I must turn the power off my router 30 sec. and then turn back in... It's very frustating
    Someone Can help me?
    Message Edited by JASL on 02-18-200702:46 AM

    try out a few tweaks in the wireless settings....
    change the ssid , channel to 1 or 11...
    under the "advanced wireless settings" , change the beacon interval - 50 , fragmentation threshold - 2304 and RTS threshold - 2304 ....
    do a power cycle after changing the settings

  • Wifi connection drops down. [SOLVED]

    Hi, I'm having some issues with the wifi, in my notebook lenovo b5070. The main problem is that the connection drops down after 20, 30 minutes. I tried to change from NetworkManager to Wicd, but that didn't change anything. I also tried to create a profile and connect me through netctl, but again that didn't change anything. Other issues that I'm having are: Sometimes I can't even connect to the wifi, or if I can connect finally, and I try to request some website, the browser keeps idle and finally shows a "Server not found" message. Also the wifi signal seems pretty fine. I also tried change the tx, rts to the max with iwconfig, but this didn't change anything. I'm running out of ideas. Any idea?
    Here is some info:
    [astinx@compu ~]$ lsusb
    Bus 003 Device 002: ID 8087:8000 Intel Corp.
    Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 001 Device 005: ID 138a:0011 Validity Sensors, Inc. VFS5011 Fingerprint Reader
    Bus 001 Device 004: ID 0bda:b728 Realtek Semiconductor Corp.
    Bus 001 Device 003: ID 0c45:6514 Microdia
    Bus 001 Device 002: ID 0458:012b KYE Systems Corp. (Mouse Systems)
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    [astinx@compu ~]$ iwconfig
    wlp9s0 IEEE 802.11bgn ESSID:"albele"
    Mode:Managed Frequency:2.437 GHz Access Point: 00:1D:7E:6A:C4:67
    Bit Rate=54 Mb/s Tx-Power=20 dBm
    Retry short limit:7 RTS thr=2347 B Fragment thr:off
    Power Management:off
    Link Quality=52/70 Signal level=-58 dBm
    Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
    Tx excessive retries:0 Invalid misc:0 Missed beacon:0
    lo no wireless extensions.
    enp8s0 no wireless extensions.
    [astinx@compu ~]$ ifconfig
    enp8s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
    ether f0:76:1c:0c:12:99 txqueuelen 1000 (Ethernet)
    RX packets 0 bytes 0 (0.0 B)
    RX errors 0 dropped 0 overruns 0 frame 0
    TX packets 0 bytes 0 (0.0 B)
    TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
    lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
    inet 127.0.0.1 netmask 255.0.0.0
    inet6 ::1 prefixlen 128 scopeid 0x10<host>
    loop txqueuelen 0 (Local Loopback)
    RX packets 336 bytes 29472 (28.7 KiB)
    RX errors 0 dropped 0 overruns 0 frame 0
    TX packets 336 bytes 29472 (28.7 KiB)
    TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
    wlp9s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
    inet 192.168.1.111 netmask 255.255.255.0 broadcast 192.168.1.255
    inet6 fe80::fa77:2850:54a4:4213 prefixlen 64 scopeid 0x20<link>
    ether 38:b1:db:4f:f7:33 txqueuelen 1000 (Ethernet)
    RX packets 192 bytes 52270 (51.0 KiB)
    RX errors 0 dropped 0 overruns 0 frame 0
    TX packets 1297 bytes 138803 (135.5 KiB)
    TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
    [astinx@compu ~]$ lspci -k
    00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 0b)
    Subsystem: Lenovo Device 3978
    00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
    Subsystem: Lenovo Device 3978
    Kernel driver in use: i915
    Kernel modules: i915
    00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b)
    Subsystem: Lenovo Device 3978
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd_hda_intel
    00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)
    Subsystem: Lenovo Device 3978
    Kernel driver in use: xhci_hcd
    Kernel modules: xhci_pci
    00:16.0 Communication controller: Intel Corporation 8 Series HECI #0 (rev 04)
    Subsystem: Lenovo Device 3978
    Kernel driver in use: mei_me
    Kernel modules: mei_me
    00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
    Subsystem: Lenovo Device 3978
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd_hda_intel
    00:1c.0 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 1 (rev e4)
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:1c.1 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 2 (rev e4)
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:1c.2 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 3 (rev e4)
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:1c.3 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 4 (rev e4)
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:1d.0 USB controller: Intel Corporation 8 Series USB EHCI #1 (rev 04)
    Subsystem: Lenovo Device 3978
    Kernel driver in use: ehci-pci
    Kernel modules: ehci_pci
    00:1f.0 ISA bridge: Intel Corporation 8 Series LPC Controller (rev 04)
    Subsystem: Lenovo Device 3978
    Kernel driver in use: lpc_ich
    Kernel modules: lpc_ich
    00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] (rev 04)
    Subsystem: Lenovo Device 3978
    Kernel driver in use: ahci
    Kernel modules: ahci
    00:1f.3 SMBus: Intel Corporation 8 Series SMBus Controller (rev 04)
    Subsystem: Lenovo Device 3978
    Kernel modules: i2c_i801
    02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
    Subsystem: Lenovo Device 3801
    Kernel driver in use: rtsx_pci
    Kernel modules: rtsx_pci
    08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)
    Subsystem: Lenovo Device 380e
    Kernel driver in use: r8169
    Kernel modules: r8169
    09:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter
    Subsystem: Lenovo Device b736
    Kernel driver in use: rtl8723be
    Kernel modules: rtl8723be
    [astinx@compu ~]$ lsusb
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.18.5-1-ARCH (builduser@tobias) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jan 30 07:31:50 CET 2015
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=37f0494b-6280-4a2a-92af-9abc262b3476 rw resume=UUID=38f5c3ea-1283-4a7e-a952-49dee4e9b5ae quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009735ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000097360000-0x0000000097b5ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000097b60000-0x000000009c36efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009c36f000-0x000000009c56efff] type 20
    [ 0.000000] BIOS-e820: [mem 0x000000009c56f000-0x000000009cebefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] efi: EFI v2.31 by INSYDE Corp.
    [ 0.000000] efi: ACPI=0x9cffe000 ACPI 2.0=0x9cffe014 SMBIOS=0x9cebef98
    [ 0.000000] efi: mem00: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000001000) (0MB)
    [ 0.000000] efi: mem01: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000001000-0x000000000006f000) (0MB)
    [ 0.000000] efi: mem02: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000006f000-0x0000000000070000) (0MB)
    [ 0.000000] efi: mem03: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000070000-0x0000000000080000) (0MB)
    [ 0.000000] efi: mem04: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000080000-0x0000000000082000) (0MB)
    [ 0.000000] efi: mem05: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000082000-0x0000000000088000) (0MB)
    [ 0.000000] efi: mem06: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x0000000000088000-0x000000000009f000) (0MB)
    [ 0.000000] efi: mem07: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000009f000-0x00000000000a0000) (0MB)
    [ 0.000000] efi: mem08: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000000f3b000) (14MB)
    [ 0.000000] efi: mem09: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000f3b000-0x0000000037926000) (873MB)
    [ 0.000000] efi: mem10: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000037926000-0x0000000037c8b000) (3MB)
    [ 0.000000] efi: mem11: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000037c8b000-0x000000006ea96000) (878MB)
    [ 0.000000] efi: mem12: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000006ea96000-0x0000000094b70000) (608MB)
    [ 0.000000] efi: mem13: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000094b70000-0x0000000094b90000) (0MB)
    [ 0.000000] efi: mem14: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000094b90000-0x00000000968e3000) (29MB)
    [ 0.000000] efi: mem15: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000968e3000-0x0000000097360000) (10MB)
    [ 0.000000] efi: mem16: [Reserved | | | | | |WB|WT|WC|UC] range=[0x0000000097360000-0x0000000097b60000) (8MB)
    [ 0.000000] efi: mem17: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000097b60000-0x0000000097d52000) (1MB)
    [ 0.000000] efi: mem18: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x0000000097d52000-0x0000000097d6f000) (0MB)
    [ 0.000000] efi: mem19: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000097d6f000-0x000000009951f000) (23MB)
    [ 0.000000] efi: mem20: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009951f000-0x0000000099f09000) (9MB)
    [ 0.000000] efi: mem21: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000099f09000-0x0000000099f0e000) (0MB)
    [ 0.000000] efi: mem22: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000099f0e000-0x0000000099f14000) (0MB)
    [ 0.000000] efi: mem23: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000099f14000-0x0000000099f16000) (0MB)
    [ 0.000000] efi: mem24: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000099f16000-0x0000000099f3f000) (0MB)
    [ 0.000000] efi: mem25: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000099f3f000-0x0000000099f40000) (0MB)
    [ 0.000000] efi: mem26: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000099f40000-0x000000009a08e000) (1MB)
    [ 0.000000] efi: mem27: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a08e000-0x000000009a094000) (0MB)
    [ 0.000000] efi: mem28: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a094000-0x000000009a095000) (0MB)
    [ 0.000000] efi: mem29: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a095000-0x000000009a097000) (0MB)
    [ 0.000000] efi: mem30: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a097000-0x000000009a09b000) (0MB)
    [ 0.000000] efi: mem31: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a09b000-0x000000009a09c000) (0MB)
    [ 0.000000] efi: mem32: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a09c000-0x000000009a0d5000) (0MB)
    [ 0.000000] efi: mem33: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a0d5000-0x000000009a0d7000) (0MB)
    [ 0.000000] efi: mem34: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a0d7000-0x000000009a0dc000) (0MB)
    [ 0.000000] efi: mem35: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a0dc000-0x000000009a0df000) (0MB)
    [ 0.000000] efi: mem36: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a0df000-0x000000009a0e7000) (0MB)
    [ 0.000000] efi: mem37: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a0e7000-0x000000009a0ea000) (0MB)
    [ 0.000000] efi: mem38: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a0ea000-0x000000009a0eb000) (0MB)
    [ 0.000000] efi: mem39: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a0eb000-0x000000009a0ef000) (0MB)
    [ 0.000000] efi: mem40: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a0ef000-0x000000009a193000) (0MB)
    [ 0.000000] efi: mem41: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a193000-0x000000009a194000) (0MB)
    [ 0.000000] efi: mem42: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a194000-0x000000009bd6f000) (27MB)
    [ 0.000000] efi: mem43: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009bd6f000-0x000000009bf51000) (1MB)
    [ 0.000000] efi: mem44: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009bf51000-0x000000009bf5b000) (0MB)
    [ 0.000000] efi: mem45: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000009bf5b000-0x000000009c36f000) (4MB)
    [ 0.000000] efi: mem46: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x000000009c36f000-0x000000009c56f000) (2MB)
    [ 0.000000] efi: mem47: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x000000009c56f000-0x000000009cabf000) (5MB)
    [ 0.000000] efi: mem48: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000009cabf000-0x000000009cebf000) (4MB)
    [ 0.000000] efi: mem49: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x000000009cebf000-0x000000009cfbf000) (1MB)
    [ 0.000000] efi: mem50: [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC] range=[0x000000009cfbf000-0x000000009cfff000) (0MB)
    [ 0.000000] efi: mem51: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009cfff000-0x000000009d000000) (0MB)
    [ 0.000000] efi: mem52: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x000000015f600000) (1526MB)
    [ 0.000000] efi: mem53: [Reserved | | | | | | | | | ] range=[0x00000000000a0000-0x00000000000c0000) (0MB)
    [ 0.000000] efi: mem54: [Reserved | | | | | | | | | ] range=[0x000000009d000000-0x000000009fa00000) (42MB)
    [ 0.000000] efi: mem55: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000e0000000-0x00000000f0000000) (256MB)
    [ 0.000000] efi: mem56: [Reserved | | | | | | | | | ] range=[0x00000000fe101000-0x00000000fe113000) (0MB)
    [ 0.000000] efi: mem57: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000feb00000-0x00000000feb10000) (0MB)
    [ 0.000000] efi: mem58: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fec00000-0x00000000fec01000) (0MB)
    [ 0.000000] efi: mem59: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed00000-0x00000000fed1c000) (0MB)
    [ 0.000000] efi: mem60: [Memory Mapped I/O |RUN| | | | | | | | ] range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
    [ 0.000000] efi: mem61: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed20000-0x00000000fee01000) (0MB)
    [ 0.000000] efi: mem62: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000ffa00000-0x0000000100000000) (6MB)
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: LENOVO 20384/Lenovo B50-70, BIOS 9DCN21WW(V2.02) 06/27/2014
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x15f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-E7FFF write-protect
    [ 0.000000] E8000-EFFFF write-combining
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
    [ 0.000000] 1 base 009D000000 mask 7FFF000000 uncachable
    [ 0.000000] 2 base 009E000000 mask 7FFE000000 uncachable
    [ 0.000000] 3 base 00A0000000 mask 7FE0000000 uncachable
    [ 0.000000] 4 base 00C0000000 mask 7FC0000000 uncachable
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] BRK [0x01b38000, 0x01b38fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x15f400000-0x15f5fffff]
    [ 0.000000] [mem 0x15f400000-0x15f5fffff] page 2M
    [ 0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x15c000000-0x15f3fffff]
    [ 0.000000] [mem 0x15c000000-0x15f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
    [ 0.000000] [mem 0x100000000-0x13fffffff] page 1G
    [ 0.000000] [mem 0x140000000-0x15bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x9735ffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
    [ 0.000000] [mem 0x80000000-0x971fffff] page 2M
    [ 0.000000] [mem 0x97200000-0x9735ffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x97b60000-0x9c36efff]
    [ 0.000000] [mem 0x97b60000-0x97bfffff] page 4k
    [ 0.000000] [mem 0x97c00000-0x9c1fffff] page 2M
    [ 0.000000] [mem 0x9c200000-0x9c36efff] page 4k
    [ 0.000000] BRK [0x01b3a000, 0x01b3afff] PGTABLE
    [ 0.000000] BRK [0x01b3b000, 0x01b3bfff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x9cfff000-0x9cffffff]
    [ 0.000000] [mem 0x9cfff000-0x9cffffff] page 4k
    [ 0.000000] RAMDISK: [mem 0x37926000-0x37c8afff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x000000009CFFE014 000024 (v02 LENOVO)
    [ 0.000000] ACPI: XSDT 0x000000009CFFE210 0000B4 (v01 LENOVO CB-01 00000001 01000013)
    [ 0.000000] ACPI: FACP 0x000000009CFF8000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: DSDT 0x000000009CFE7000 00DA18 (v02 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: FACS 0x000000009CFBA000 000040
    [ 0.000000] ACPI: UEFI 0x000000009CFFD000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: FPDT 0x000000009CFFB000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: MSDM 0x000000009CFFA000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: ASF! 0x000000009CFF9000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: HPET 0x000000009CFF7000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: APIC 0x000000009CFF6000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: MCFG 0x000000009CFF5000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: WDAT 0x000000009CFE6000 000224 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 0x000000009CFE5000 000700 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: BOOT 0x000000009CFE3000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: LPIT 0x000000009CFE2000 000094 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: ASPT 0x000000009CFE0000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: DBGP 0x000000009CFDF000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 0x000000009CFDA000 000539 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 0x000000009CFD9000 000AD8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 0x000000009CFD5000 003537 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: BGRT 0x000000009CFD4000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000015f5fffff]
    [ 0.000000] NODE_DATA(0) allocated [mem 0x15f5f9000-0x15f5fcfff]
    [ 0.000000] [ffffea0000000000-ffffea00057fffff] PMD -> [ffff88015ac00000-ffff88015ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x15f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0006efff]
    [ 0.000000] node 0: [mem 0x00070000-0x00087fff]
    [ 0.000000] node 0: [mem 0x00100000-0x9735ffff]
    [ 0.000000] node 0: [mem 0x97b60000-0x9c36efff]
    [ 0.000000] node 0: [mem 0x9cfff000-0x9cffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x15f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x15f5fffff]
    [ 0.000000] On node 0 totalpages: 1028342
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 24 pages reserved
    [ 0.000000] DMA zone: 3974 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 9902 pages used for memmap
    [ 0.000000] DMA32 zone: 633712 pages, LIFO batch:31
    [ 0.000000] Normal zone: 6104 pages used for memmap
    [ 0.000000] Normal zone: 390656 pages, LIFO batch:31
    [ 0.000000] Reserving Intel graphics stolen memory at 0x9da00000-0x9f9fffff
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x97360000-0x97b5ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9c36f000-0x9c56efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9c56f000-0x9cebefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9cebf000-0x9cfbefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
    [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88015f200000 s82880 r8192 d31808 u262144
    [ 0.000000] pcpu-alloc: s82880 r8192 d31808 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1012248
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=37f0494b-6280-4a2a-92af-9abc262b3476 rw resume=UUID=38f5c3ea-1283-4a7e-a952-49dee4e9b5ae quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3909256K/4113368K available (5480K kernel code, 908K rwdata, 1720K rodata, 1160K init, 1184K bss, 204112K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
    [ 0.000000] NR_IRQS:8448 nr_irqs:760 0
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2394.377 MHz processor
    [ 0.000041] Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.28 BogoMIPS (lpj=7981256)
    [ 0.000045] pid_max: default: 32768 minimum: 301
    [ 0.000053] ACPI: Core revision 20140926
    [ 0.018809] ACPI: All ACPI Tables successfully acquired
    [ 0.039185] Security Framework initialized
    [ 0.039194] Yama: becoming mindful.
    [ 0.039553] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.040627] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.041121] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.041129] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.041378] Initializing cgroup subsys memory
    [ 0.041384] Initializing cgroup subsys devices
    [ 0.041386] Initializing cgroup subsys freezer
    [ 0.041389] Initializing cgroup subsys net_cls
    [ 0.041391] Initializing cgroup subsys blkio
    [ 0.041417] CPU: Physical Processor ID: 0
    [ 0.041419] CPU: Processor Core ID: 0
    [ 0.041424] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.042651] mce: CPU supports 7 MCE banks
    [ 0.042667] CPU0: Thermal monitoring enabled (TM1)
    [ 0.042682] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
    Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
    [ 0.042812] Freeing SMP alternatives memory: 20K (ffffffff81a07000 - ffffffff81a0c000)
    [ 0.043856] Ignoring BGRT: invalid status 0 (expected 1)
    [ 0.045955] ftrace: allocating 20931 entries in 82 pages
    [ 0.058119] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.091151] smpboot: CPU0: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz (fam: 06, model: 45, stepping: 01)
    [ 0.091159] TSC deadline timer enabled
    [ 0.091185] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [ 0.091212] ... version: 3
    [ 0.091214] ... bit width: 48
    [ 0.091215] ... generic registers: 4
    [ 0.091216] ... value mask: 0000ffffffffffff
    [ 0.091217] ... max period: 0000ffffffffffff
    [ 0.091218] ... fixed-purpose events: 3
    [ 0.091220] ... event mask: 000000070000000f
    [ 0.111308] x86: Booting SMP configuration:
    [ 0.111311] .... node #0, CPUs: #1
    [ 0.125959] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.132620] #2 #3
    [ 0.168461] x86: Booted up 1 node, 4 CPUs
    [ 0.168465] smpboot: Total of 4 processors activated (19162.14 BogoMIPS)
    [ 0.173479] devtmpfs: initialized
    [ 0.176167] PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes)
    [ 0.177292] pinctrl core: initialized pinctrl subsystem
    [ 0.177339] RTC time: 15:39:50, date: 02/08/15
    [ 0.177475] NET: Registered protocol family 16
    [ 0.189973] cpuidle: using governor ladder
    [ 0.203321] cpuidle: using governor menu
    [ 0.203363] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.203364] ACPI: bus type PCI registered
    [ 0.203366] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.203456] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.203459] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.203881] PCI: Using configuration type 1 for base access
    [ 0.217092] ACPI: Added _OSI(Module Device)
    [ 0.217094] ACPI: Added _OSI(Processor Device)
    [ 0.217096] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.217098] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.222927] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.237854] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.250192] ACPI: Dynamic OEM Table Load:
    [ 0.250204] ACPI: SSDT 0xFFFF880158F80C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
    [ 0.263714] ACPI: Dynamic OEM Table Load:
    [ 0.263726] ACPI: SSDT 0xFFFF880158F59800 0005AA (v01 PmRef ApIst 00003000 INTL 20121220)
    [ 0.276877] ACPI: Dynamic OEM Table Load:
    [ 0.276887] ACPI: SSDT 0xFFFF880158E92800 000119 (v01 PmRef ApCst 00003000 INTL 20121220)
    [ 0.303769] ACPI: Interpreter enabled
    [ 0.303781] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
    [ 0.303790] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
    [ 0.303817] ACPI: (supports S0 S3 S4 S5)
    [ 0.303818] ACPI: Using IOAPIC for interrupt routing
    [ 0.303851] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.416427] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    [ 0.416435] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.417003] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
    [ 0.417721] PCI host bridge to bus 0000:00
    [ 0.417725] pci_bus 0000:00: root bus resource [bus 00-fe]
    [ 0.417728] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.417730] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.417732] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.417734] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
    [ 0.417736] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
    [ 0.417738] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
    [ 0.417740] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
    [ 0.417742] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.417744] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.417746] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.417748] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.417750] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
    [ 0.417760] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
    [ 0.417946] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
    [ 0.417962] pci 0000:00:02.0: reg 0x10: [mem 0xb2000000-0xb23fffff 64bit]
    [ 0.417971] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
    [ 0.417977] pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f]
    [ 0.418153] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
    [ 0.418164] pci 0000:00:03.0: reg 0x10: [mem 0xb2610000-0xb2613fff 64bit]
    [ 0.418365] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
    [ 0.418385] pci 0000:00:14.0: reg 0x10: [mem 0xb2600000-0xb260ffff 64bit]
    [ 0.418450] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.418565] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.418612] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
    [ 0.418635] pci 0000:00:16.0: reg 0x10: [mem 0xb2618000-0xb261801f 64bit]
    [ 0.418711] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.418877] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
    [ 0.418893] pci 0000:00:1b.0: reg 0x10: [mem 0xb2614000-0xb2617fff 64bit]
    [ 0.418968] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.419082] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.419126] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
    [ 0.419198] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.419353] pci 0000:00:1c.1: [8086:9c12] type 01 class 0x060400
    [ 0.419428] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.419584] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
    [ 0.419659] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.419813] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
    [ 0.419888] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.420052] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
    [ 0.420074] pci 0000:00:1d.0: reg 0x10: [mem 0xb261c000-0xb261c3ff]
    [ 0.420172] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.420309] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.420363] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
    [ 0.420631] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
    [ 0.420647] pci 0000:00:1f.2: reg 0x10: [io 0x6088-0x608f]
    [ 0.420655] pci 0000:00:1f.2: reg 0x14: [io 0x6094-0x6097]
    [ 0.420663] pci 0000:00:1f.2: reg 0x18: [io 0x6080-0x6087]
    [ 0.420671] pci 0000:00:1f.2: reg 0x1c: [io 0x6090-0x6093]
    [ 0.420678] pci 0000:00:1f.2: reg 0x20: [io 0x6060-0x607f]
    [ 0.420686] pci 0000:00:1f.2: reg 0x24: [mem 0xb261b000-0xb261b7ff]
    [ 0.420728] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.420878] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
    [ 0.420894] pci 0000:00:1f.3: reg 0x10: [mem 0xb2619000-0xb26190ff 64bit]
    [ 0.420915] pci 0000:00:1f.3: reg 0x20: [io 0x6040-0x605f]
    [ 0.421136] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.421234] pci 0000:02:00.0: [10ec:5229] type 00 class 0xff0000
    [ 0.421269] pci 0000:02:00.0: reg 0x10: [mem 0xb1000000-0xb1000fff]
    [ 0.421424] pci 0000:02:00.0: supports D1 D2
    [ 0.421427] pci 0000:02:00.0: PME# supported from D1 D2 D3hot
    [ 0.421466] pci 0000:02:00.0: System wakeup disabled by ACPI
    [ 0.427022] pci 0000:00:1c.1: PCI bridge to [bus 02-07]
    [ 0.427027] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
    [ 0.427030] pci 0000:00:1c.1: bridge window [mem 0xb1000000-0xb1ffffff]
    [ 0.427036] pci 0000:00:1c.1: bridge window [mem 0xb0000000-0xb0ffffff 64bit pref]
    [ 0.427119] pci 0000:08:00.0: [10ec:8168] type 00 class 0x020000
    [ 0.427139] pci 0000:08:00.0: reg 0x10: [io 0x4000-0x40ff]
    [ 0.427169] pci 0000:08:00.0: reg 0x18: [mem 0xb2504000-0xb2504fff 64bit]
    [ 0.427188] pci 0000:08:00.0: reg 0x20: [mem 0xb2500000-0xb2503fff 64bit]
    [ 0.427291] pci 0000:08:00.0: supports D1 D2
    [ 0.427293] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.427358] pci 0000:08:00.0: System wakeup disabled by ACPI
    [ 0.433685] pci 0000:00:1c.2: PCI bridge to [bus 08]
    [ 0.433689] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
    [ 0.433693] pci 0000:00:1c.2: bridge window [mem 0xb2500000-0xb25fffff]
    [ 0.433780] pci 0000:09:00.0: [10ec:b723] type 00 class 0x028000
    [ 0.433803] pci 0000:09:00.0: reg 0x10: [io 0x3000-0x30ff]
    [ 0.433837] pci 0000:09:00.0: reg 0x18: [mem 0xb2400000-0xb2403fff 64bit]
    [ 0.433959] pci 0000:09:00.0: supports D1 D2
    [ 0.433961] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.433994] pci 0000:09:00.0: System wakeup disabled by ACPI
    [ 0.443696] pci 0000:00:1c.3: PCI bridge to [bus 09]
    [ 0.443699] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
    [ 0.443703] pci 0000:00:1c.3: bridge window [mem 0xb2400000-0xb24fffff]
    [ 0.443740] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 0.497639] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.497696] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.497748] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.497800] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.497851] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.497902] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.497953] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.498004] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.498197] ACPI: Enabled 5 GPEs in block 00 to 7F
    [ 0.498242] ACPI : EC: GPE = 0x27, I/O: command/status = 0x66, data = 0x62
    [ 0.498365] vgaarb: setting as boot device: PCI:0000:00:02.0
    [ 0.498368] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.498372] vgaarb: loaded
    [ 0.498373] vgaarb: bridge control possible 0000:00:02.0
    [ 0.498519] PCI: Using ACPI for IRQ routing
    [ 0.504636] PCI: pci_cache_line_size set to 64 bytes
    [ 0.504686] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
    [ 0.504688] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
    [ 0.504689] e820: reserve RAM buffer [mem 0x97360000-0x97ffffff]
    [ 0.504691] e820: reserve RAM buffer [mem 0x9c36f000-0x9fffffff]
    [ 0.504693] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
    [ 0.504695] e820: reserve RAM buffer [mem 0x15f600000-0x15fffffff]
    [ 0.504822] NetLabel: Initializing
    [ 0.504823] NetLabel: domain hash size = 128
    [ 0.504824] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.504838] NetLabel: unlabeled traffic allowed by default
    [ 0.504863] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.504870] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.506900] Switched to clocksource hpet
    [ 0.512939] pnp: PnP ACPI init
    [ 0.513126] system 00:00: [io 0x0680-0x069f] has been reserved
    [ 0.513129] system 00:00: [io 0x0500-0x053f] has been reserved
    [ 0.513132] system 00:00: [io 0xffff] has been reserved
    [ 0.513134] system 00:00: [io 0xffff] has been reserved
    [ 0.513136] system 00:00: [io 0xffff] has been reserved
    [ 0.513139] system 00:00: [io 0x1800-0x18fe] could not be reserved
    [ 0.513141] system 00:00: [io 0x164e-0x164f] has been reserved
    [ 0.513145] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.513202] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.513256] system 00:02: [io 0x1854-0x1857] has been reserved
    [ 0.513259] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.513288] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.513351] pnp 00:04: Plug and Play ACPI device, IDs SYN2b39 SYN0700 SYN0002 PNP0f13 (active)
    [ 0.563797] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.563800] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.563802] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.563804] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.563807] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.563809] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.563811] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.563813] system 00:05: [mem 0xff000000-0xff000fff] has been reserved
    [ 0.563816] system 00:05: [mem 0xff001000-0xff0010ff] has been reserved
    [ 0.563818] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
    [ 0.563821] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.563823] system 00:05: [mem 0x9fa20000-0x9fa20fff] has been reserved
    [ 0.563825] system 00:05: [mem 0x9fa10000-0x9fa1ffff] has been reserved
    [ 0.563829] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.564138] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.564571] pnp: PnP ACPI: found 7 devices
    [ 0.571172] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.571185] pci 0000:00:1c.1: PCI bridge to [bus 02-07]
    [ 0.571188] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
    [ 0.571193] pci 0000:00:1c.1: bridge window [mem 0xb1000000-0xb1ffffff]
    [ 0.571197] pci 0000:00:1c.1: bridge window [mem 0xb0000000-0xb0ffffff 64bit pref]
    [ 0.571203] pci 0000:00:1c.2: PCI bridge to [bus 08]
    [ 0.571206] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
    [ 0.571211] pci 0000:00:1c.2: bridge window [mem 0xb2500000-0xb25fffff]
    [ 0.571218] pci 0000:00:1c.3: PCI bridge to [bus 09]
    [ 0.571221] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
    [ 0.571226] pci 0000:00:1c.3: bridge window [mem 0xb2400000-0xb24fffff]
    [ 0.571235] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.571237] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.571239] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.571241] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    [ 0.571243] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    [ 0.571245] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    [ 0.571247] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
    [ 0.571249] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
    [ 0.571251] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
    [ 0.571253] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
    [ 0.571255] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
    [ 0.571257] pci_bus 0000:00: resource 15 [mem 0x9fa00000-0xfeafffff]
    [ 0.571260] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
    [ 0.571261] pci_bus 0000:02: resource 1 [mem 0xb1000000-0xb1ffffff]
    [ 0.571264] pci_bus 0000:02: resource 2 [mem 0xb0000000-0xb0ffffff 64bit pref]
    [ 0.571266] pci_bus 0000:08: resource 0 [io 0x4000-0x4fff]
    [ 0.571268] pci_bus 0000:08: resource 1 [mem 0xb2500000-0xb25fffff]
    [ 0.571270] pci_bus 0000:09: resource 0 [io 0x3000-0x3fff]
    [ 0.571272] pci_bus 0000:09: resource 1 [mem 0xb2400000-0xb24fffff]
    [ 0.571305] NET: Registered protocol family 2
    [ 0.571528] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.571618] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
    [ 0.571715] TCP: Hash tables configured (established 32768 bind 32768)
    [ 0.571736] TCP: reno registered
    [ 0.571744] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.571763] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.571824] NET: Registered protocol family 1
    [ 0.571842] pci 0000:00:02.0: Video device with shadowed ROM
    [ 0.583761] PCI: CLS 64 bytes, default 64
    [ 0.583812] Unpacking initramfs...
    [ 0.665763] Freeing initrd memory: 3476K (ffff880037926000 - ffff880037c8b000)
    [ 0.665775] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.665778] software IO TLB [mem 0x90b70000-0x94b70000] (64MB) mapped at [ffff880090b70000-ffff880094b6ffff]
    [ 0.665818] Simple Boot Flag at 0x44 set to 0x1
    [ 0.666015] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
    [ 0.666080] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x17
    [ 0.666087] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x17
    [ 0.666095] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x17
    [ 0.666104] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x17
    [ 0.666156] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 0.666187] Scanning for low memory corruption every 60 seconds
    [ 0.666541] futex hash table entries: 2048 (order: 5, 131072 bytes)
    [ 0.666577] Initialise system trusted keyring
    [ 0.666959] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.668721] zpool: loaded
    [ 0.668726] zbud: loaded
    [ 0.668990] VFS: Disk quotas dquot_6.5.2
    [ 0.669031] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.669172] msgmni has been set to 7751
    [ 0.669234] Key type big_key registered
    [ 0.669453] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.669499] io scheduler noop registered
    [ 0.669502] io scheduler deadline registered
    [ 0.669540] io scheduler cfq registered (default)
    [ 0.669759] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [ 0.669935] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
    [ 0.670110] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
    [ 0.670269] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
    [ 0.670374] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 0.670379] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 0.670396] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
    [ 0.670398] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    [ 0.670402] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
    [ 0.670419] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
    [ 0.670421] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
    [ 0.670424] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
    [ 0.670440] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
    [ 0.670442] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
    [ 0.670446] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
    [ 0.670466] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.670499] pciehp 0000:00:1c.1:pcie04: Slot #1 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
    [ 0.670533] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
    [ 0.670539] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.670583] efifb: probing for efifb
    [ 0.670605] efifb: framebuffer at 0xa0000000, mapped to 0xffffc90010800000, using 4160k, total 4160k
    [ 0.670606] efifb: mode is 1366x768x32, linelength=5504, pages=1
    [ 0.670607] efifb: scrolling: redraw
    [ 0.670609] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.674675] Console: switching to colour frame buffer device 170x48
    [ 0.678177] fb0: EFI VGA frame buffer device
    [ 0.678188] intel_idle: MWAIT substates: 0x11142120
    [ 0.678190] intel_idle: v0.4 model 0x45
    [ 0.678191] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.678506] GHES: HEST is not enabled!
    [ 0.678574] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.679056] Linux agpgart interface v0.103
    [ 0.679108] rtc_cmos 00:01: RTC can wake from S4
    [ 0.679243] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
    [ 0.679273] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 0.679287] Intel P-state driver initializing.
    [ 0.679431] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.679696] TCP: cubic registered
    [ 0.679919] NET: Registered protocol family 10
    [ 0.680456] NET: Registered protocol family 17
    [ 0.681245] Loading compiled-in X.509 certificates
    [ 0.681277] registered taskstats version 1
    [ 0.682279] Magic number: 3:299:689
    [ 0.682435] rtc_cmos 00:01: setting system clock to 2015-02-08 15:39:50 UTC (1423409990)
    [ 0.682615] PM: Checking hibernation image partition UUID=38f5c3ea-1283-4a7e-a952-49dee4e9b5ae
    [ 0.682621] PM: Hibernation image not present or could not be loaded.
    [ 0.684595] Freeing unused kernel memory: 1160K (ffffffff818e5000 - ffffffff81a07000)
    [ 0.684599] Write protecting the kernel read-only data: 8192k
    [ 0.688817] Freeing unused kernel memory: 652K (ffff88000155d000 - ffff880001600000)
    [ 0.690614] Freeing unused kernel memory: 328K (ffff8800017ae000 - ffff880001800000)
    [ 0.702916] random: systemd-tmpfile urandom read with 3 bits of entropy available
    [ 0.718779] sdhci: Secure Digital Host Controller Interface driver
    [ 0.718781] sdhci: Copyright(c) Pierre Ossman
    [ 0.720168] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS1] at 0x60,0x64 irq 1,12
    [ 0.726783] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.726825] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.727977] ACPI: bus type USB registered
    [ 0.727998] usbcore: registered new interface driver usbfs
    [ 0.728005] usbcore: registered new interface driver hub
    [ 0.728031] usbcore: registered new device driver usb
    [ 0.728826] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.728833] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
    [ 0.728904] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 0.728919] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
    [ 0.729105] hub 1-0:1.0: USB hub found
    [ 0.729116] hub 1-0:1.0: 9 ports detected
    [ 0.729254] rtsx_pci 0000:02:00.0: irq 45 for MSI/MSI-X
    [ 0.729269] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 45
    [ 0.729962] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.730134] ehci-pci: EHCI PCI platform driver
    [ 0.731658] SCSI subsystem initialized
    [ 0.732538] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.732545] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
    [ 0.732737] hub 2-0:1.0: USB hub found
    [ 0.732750] hub 2-0:1.0: 4 ports detected
    [ 0.733058] libata version 3.00 loaded.
    [ 0.733952] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.733959] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
    [ 0.733972] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.737882] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.737904] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb261c000
    [ 0.747112] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.747298] hub 3-0:1.0: USB hub found
    [ 0.747312] hub 3-0:1.0: 2 ports detected
    [ 0.747491] ahci 0000:00:1f.2: version 3.0
    [ 0.747673] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
    [ 0.747695] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
    [ 0.760531] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
    [ 0.760537] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst
    [ 0.761117] scsi host0: ahci
    [ 0.761280] scsi host1: ahci
    [ 0.761400] scsi host2: ahci
    [ 0.761527] scsi host3: ahci
    [ 0.761587] ata1: SATA max UDMA/133 abar m2048@0xb261b000 port 0xb261b100 irq 46
    [ 0.761590] ata2: SATA max UDMA/133 abar m2048@0xb261b000 port 0xb261b180 irq 46
    [ 0.761591] ata3: DUMMY
    [ 0.761592] ata4: DUMMY
    [ 0.763988] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.054094] usb 3-1: new high-speed USB device number 2 using ehci-pci
    [ 1.080772] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1.090784] usb 1-3: new low-speed USB device number 2 using xhci_hcd
    [ 1.108052] ata1.00: ATA-8: ST500LT012-1DG142, 0002LVM1, max UDMA/133
    [ 1.108057] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [ 1.147102] ata1.00: configured for UDMA/133
    [ 1.147357] scsi 0:0:0:0: Direct-Access ATA ST500LT012-1DG14 LVM1 PQ: 0 ANSI: 5
    [ 1.178260] hub 3-1:1.0: USB hub found
    [ 1.178324] hub 3-1:1.0: 8 ports detected
    [ 1.267676] usb 1-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 1.269353] hidraw: raw HID events driver (C) Jiri Kosina
    [ 1.271432] usbcore: registered new interface driver usbhid
    [ 1.271435] usbhid: USB HID core driver
    [ 1.427737] usb 1-6: new high-speed USB device number 3 using xhci_hcd
    [ 1.467751] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.472648] ata2.00: ATAPI: PLDS DVD-RW DA8A5SH, RL61, max UDMA/100
    [ 1.473654] ata2.00: configured for UDMA/100
    [ 1.487478] scsi 1:0:0:0: CD-ROM PLDS DVD-RW DA8A5SH RL61 PQ: 0 ANSI: 5
    [ 1.506690] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 1.506695] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [ 1.506762] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.506765] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.506805] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.526586] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.526589] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.526753] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 1.576727] sda: sda1 sda2 sda3 sda4
    [ 1.577520] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.668501] tsc: Refined TSC clocksource calibration: 2394.458 MHz
    [ 1.834689] usb 1-7: new full-speed USB device number 4 using xhci_hcd
    [ 1.866481] PM: Starting manual resume from disk
    [ 1.866486] PM: Hibernation image partition 8:2 present
    [ 1.866488] PM: Looking for hibernation image.
    [ 1.866742] PM: Image not found (code -22)
    [ 1.866745] PM: Hibernation image not present or could not be loaded.
    [ 2.008615] usb 1-7: No LPM exit latency info found, disabling LPM.
    [ 2.168326] usb 1-8: new full-speed USB device number 5 using xhci_hcd
    [ 2.200127] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.668929] Switched to clocksource tsc
    [ 2.998993] random: nonblocking pool is initialized
    [ 5.035645] EXT4-fs (sda4): re-mounted. Opts: discard
    [ 7.983617] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 8.001442] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input2
    [ 8.001451] ACPI: Power Button [PWRB]
    [ 8.001539] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input3
    [ 8.001584] ACPI: Lid Switch [LID0]
    [ 8.001677] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 8.001681] ACPI: Power Button [PWRF]
    [ 8.067218] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X
    [ 8.169733] thermal LNXTHERM:00: registered as thermal_zone0
    [ 8.169739] ACPI: Thermal Zone [TZ00] (29 C)
    [ 8.239918] ACPI: Battery Slot [BAT1] (battery present)
    [ 8.270385] ACPI: AC Adapter [ACAD] (on-line)
    [ 8.341145] [drm] Initialized drm 1.1.0 20060810
    [ 8.435780] ACPI Warning: SystemIO range 0x0000000000006040-0x000000000000605f conflicts with OpRegion 0x0000000000006040-0x000000000000604f (\_SB_.PCI0.SBUS.SMBI) (20140926/utaddress-258)
    [ 8.435788] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 8.524972] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input5
    [ 8.571862] [drm] Memory usable by graphics device = 2048M
    [ 8.571868] checking generic (a0000000 410000) vs hw (a0000000 10000000)
    [ 8.571870] fb: switching to inteldrmfb from EFI VGA
    [ 8.571892] Console: switching to colour dummy device 80x25
    [ 8.571969] [drm] Replacing VGA console driver
    [ 8.590169] i915 0000:00:02.0: irq 48 for MSI/MSI-X
    [ 8.590182] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 8.590184] [drm] Driver supports precise vblank timestamp query.
    [ 8.590211] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 8.648474] fbcon: inteldrmfb (fb0) is primary device
    [ 8.665898] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 8.665971] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
    [ 8.665996] [drm] Initialized i915 1.6.0 20140905 for 0000:00:02.0 on minor 0
    [ 8.789354] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:0458:012B.0001/input/input7
    [ 8.789415] hid-generic 0003:0458:012B.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:14.0-3/input0
    [ 8.812071] media: Linux media interface: v0.10
    [ 8.833777] input: PC Speaker as /devices/platform/pcspkr/input/input9
    [ 8.840567] Linux video capture interface: v2.00
    [ 8.897231] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (0c45:6514)
    [ 8.929823] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input10
    [ 8.929908] usbcore: registered new interface driver uvcvideo
    [ 8.929909] USB Video Class driver (1.1.1)
    [ 9.036891] cfg80211: Calling CRDA to update world regulatory domain
    [ 9.056738] Bluetooth: Core ver 2.19
    [ 9.056751] NET: Registered protocol family 31
    [ 9.056751] Bluetooth: HCI device and connection manager initialized
    [ 9.056757] Bluetooth: HCI socket layer initialized
    [ 9.056758] Bluetooth: L2CAP socket layer initialized
    [ 9.056766] Bluetooth: SCO socket layer initialized
    [ 9.348730] usbcore: registered new interface driver btusb
    [ 9.452303] iTCO_vendor_support: vendor-support=0
    [ 9.452955] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 9.452990] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
    [ 9.453081] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 9.494632] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 9.494637] r8169 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 9.501333] r8169 0000:08:00.0: irq 49 for MSI/MSI-X
    [ 9.501800] r8169 0000:08:00.0 eth0: RTL8168g/8111g at 0xffffc90010788000, f0:76:1c:0c:12:99, XID 10900800 IRQ 49
    [ 9.501802] r8169 0000:08:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 9.582307] rtl8723be: Using firmware rtlwifi/rtl8723befw.bin
    [ 9.640127] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
    [ 9.640351] rtlwifi: rtlwifi: wireless switch is on
    [ 9.653001] mousedev: PS/2 mouse device common for all mice
    [ 9.667517] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x2a800, board id: 2848, fw id: 1581875
    [ 9.686347] r8169 0000:08:00.0 enp8s0: renamed from eth0
    [ 9.708662] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
    [ 9.727739] Console: switching to colour frame buffer device 170x48
    [ 9.730327] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 9.730328] i915 0000:00:02.0: registered panic notifier
    [ 9.737976] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
    [ 9.743445] AVX2 version of gcm_enc/dec engaged.
    [ 9.743448] AES CTR mode by8 optimization enabled
    [ 9.745577] snd_hda_intel 0000:00:03.0: irq 51 for MSI/MSI-X
    [ 10.040841] sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
    [ 10.040848] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 10.040851] sound hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
    [ 10.040852] sound hdaudioC1D0: mono: mono_out=0x0
    [ 10.040854] sound hdaudioC1D0: inputs:
    [ 10.040857] sound hdaudioC1D0: Mic=0x19
    [ 10.040859] sound hdaudioC1D0: Internal Mic=0x12
    [ 10.046345] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
    [ 10.046446] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
    [ 10.046909] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
    [ 10.047361] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input14
    [ 10.047575] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
    [ 10.047649] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
    [ 10.097496] rtl8723be 0000:09:00.0 wlp9s0: renamed from wlan0
    [ 10.655545] cfg80211: World regulatory domain updated:
    [ 10.655549] cfg80211: DFS Master region: unset
    [ 10.655550] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
    [ 10.655553] cfg80211: (2402000 KHz - 2472000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A)
    [ 10.655555] cfg80211: (2457000 KHz - 2482000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A)
    [ 10.655557] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
    [ 10.655559] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
    [ 10.655561] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
    [ 10.655563] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
    [ 10.655564] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
    [ 10.655566] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
    [ 10.732705] intel_rapl: Found RAPL domain package
    [ 10.732711] intel_rapl: Found RAPL domain core
    [ 10.732714] intel_rapl: Found RAPL domain uncore
    [ 10.732717] intel_rapl: Found RAPL domain dram
    [ 10.844302] Adding 4009760k swap on /dev/sda2. Priority:-1 extents:1 across:4009760k FS
    [ 13.353211] systemd-journald[146]: Received request to flush runtime journal from PID 1
    [ 18.647280] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 18.647284] Bluetooth: BNEP filters: protocol multicast
    [ 18.647293] Bluetooth: BNEP socket layer initialized
    [ 21.632791] r8169 0000:08:00.0 enp8s0: link down
    [ 83.137005] wlp9s0: authenticate with 00:1d:7e:6a:c4:67
    [ 83.729985] wlp9s0: send auth to 00:1d:7e:6a:c4:67 (try 1/3)
    [ 83.731584] wlp9s0: authenticated
    [ 83.731753] rtl8723be 0000:09:00.0 wlp9s0: disabling HT as WMM/QoS is not supported by the AP
    [ 83.731757] rtl8723be 0000:09:00.0 wlp9s0: disabling VHT as WMM/QoS is not supported by the AP
    [ 83.734174] wlp9s0: associate with 00:1d:7e:6a:c4:67 (try 1/3)
    [ 83.737516] wlp9s0: RX AssocResp from 00:1d:7e:6a:c4:67 (capab=0x411 status=0 aid=3)
    [ 83.737660] wlp9s0: associated
    [astinx@compu ~]$ systemctl status
    ● compu
    State: running
    Jobs: 0 queued
    Failed: 0 units
    Since: dom 2015-02-08 13:47:04 ART; 24min ago
    CGroup: /
    ├─1 /sbin/init
    ├─system.slice
    │ ├─dbus.service
    │ │ └─301 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation
    │ ├─org.cups.cupsd.service
    │ │ └─299 /usr/bin/cupsd -l
    │ ├─ModemManager.service
    │ │ └─303 /usr/bin/ModemManager
    │ ├─wpa_supplicant.service
    │ │ └─346 /usr/bin/wpa_supplicant -u
    │ ├─lightdm.service
    │ │ ├─314 /usr/bin/lightdm
    │ │ └─329 /usr/bin/Xorg.bin :0 -seat seat0 -auth /run/lightdm/root/:0 -nolisten tcp vt1 -novtswitch
    │ ├─accounts-daemon.service
    │ │ └─331 /usr/lib/accountsser

    So long I tried as Gusar said to loading the rtl8723b module with those params:
    sudo modprobe rtl8723be fwlps=0
    sudo modprobe rtl8723be ips=0
    So far by now, the connection hasn't dropped (one hour since I made the change)
    But is quite strange that when I do
    [astinx@compu ~]$ more /sys/module/rtl8723be/parameters/ips
    Y
    I mean, the parameters changed or not? I also tried with setting with N instead of 0.
    EDIT:
    The drop downs come back shortly after. I find quite strange that I cannot manage the power from iwconfig
    [astinx@compu ~]$ sudo iwconfig wlp9s0 power off
    [sudo] password for astinx:
    Error for wireless request "Set Power Management" (8B2C) :
    SET failed on device wlp9s0 ; Operation not supported.
    Last edited by astinx (2015-02-08 21:46:47)

  • Issues After Disabling IPv6 on Your NIC on SBS 2008

    If you uncheck the IPv6 protocol from your network interface card on your Windows SBS 2008 server you may see the following issues after a reboot:
    Microsoft Exchange services fail to start
    Server hangs at “Applying Computer Settings…” (can eventually logon after 30 – 60 minutes)
    Network icons show as offline
    Some or all of the following events
    Application Log Events
    Source: MSExchange ADAccess
    Event ID: 2114
    Task Category: Topology
    Level: Error
    Description:
    Process MAD.EXE (PID=2088). Topology discovery failed, error 0x80040a02 (DSC_E_NO_SUITABLE_CDC). Look up the Lightweight Directory Access Protocol (LDAP) error code specified in the event description. To do this, use Microsoft Knowledge Base article 218185,
    “Microsoft LDAP Error Codes.” Use the information in that article to learn more about the cause and resolution to this error. Use the Ping or PathPing command-line tools to test network connectivity to local domain controllers.
    Source: MSExchange ADAccess
    Event ID: 2601
    Task Category: General
    Level: Warning
    Description:
    Process MSEXCHANGEADTOPOLOGY (PID=952). When initializing a remote procedure call (RPC) to the Microsoft Exchange Active Directory Topology service, Exchange could not retrieve the SID for account <WKGUID=DC1301662F547445B9C490A52961F8FC,CN=Microsoft Exchange,CN=Services,CN=Configuration,…>
    – Error code=80040a01.
    The Microsoft Exchange Active Directory Topology service will continue starting with limited permissions.
    Source: MSExchange ADAccess
    Event ID: 2102
    Task Category: Topology
    Level: Error
    Description:
    Process MAD.EXE (PID=2088). All Domain Controller Servers in use are not responding: SBS.sbs2008.local
    Source: MSExchange ADAccess
    Event ID: 2105
    Task Category: Topology
    Level: Warning
    Description:
    Process MAD.EXE (PID=2088). Exchange Active Directory Provider failed to obtain DNS records for domain sbs2008.local. DNS Priority and Weight for the Domain Controllers in this domain will be set to the default values 0 (priority) and 100 (weight).
    Source: MSExchange ADAccess
    Event ID: 2114
    Task Category: Topology
    Level: Error
    Description:
    Process MSEXCHANGEADTOPOLOGYSERVICE.EXE (PID=952). Topology discovery failed, error 0x80040a02 (DSC_E_NO_SUITABLE_CDC). Look up the Lightweight Directory Access Protocol (LDAP) error code specified in the event description. To do this, use Microsoft Knowledge
    Base article 218185, “Microsoft LDAP Error Codes.” Use the information in that article to learn more about the cause and resolution to this error. Use the Ping or PathPing command-line tools to test network connectivity to local domain controllers.
    Source: MSExchangeFBPublish
    Event ID: 8197
    Task Category: General
    Level: Error
    Description:
    Error initializing session for virtual machine SBS. The error number is 0x80040a01. Make sure Microsoft Exchange Store is running. Also, make sure that there is a valid public folder database on the Exchange server.
    Source: MSExchangeTransportLogSearch
    Event ID: 7005
    Task Category: General
    Level: Error
    Description:
    Microsoft Exchange couldn’t read the configuration from the Active Directory directory service because of error: Failed to load config due to exception: Microsoft.Exchange.Data.Directory.NoSuitableServerFoundException: The Exchange Topology service on server
    localhost did not return a suitable domain controller.
    System Log Events
    Source: Service Control Manager
    Event ID: 7044
    Task Category: None
    Level: Warning
    Description:
    The following service is taking more than 16 minutes to start and may have stopped responding: Microsoft Exchange System Attendant
    Source: Service Control Manager
    Event ID: 7022
    Task Category: None
    Level: Error
    Description:
    The Microsoft Exchange Transport service hung on starting.
    Source: Service Control Manager
    Event ID: 7024
    Task Category: None
    Level: Error
    Description:
    The Microsoft Exchange Information Store service terminated with service-specific error 0 (0×0).

    Hi,
    Based on your description, it seems to be the same as the following blog.
    Issues
    After Disabling IPv6 on Your NIC on SBS 2008
    Did you mean that encounter the same issue? If so, there is a resolution in that blog, please check if can
    help you solve the issue.
    If any other issue exists or any update, please don’t hesitate to let me know and provide more details. It
    will help me understand clearly.
    Best regards,
    Justin Gu

  • Completely disable a specifict key {solved...kinda}

    {Solved} ---> since i couldn't find a way to solve my problem i decided to remove the keyboard and manually cut off the connection of the key, i am glad to say it actually worked and that it seems the rest of my keyboard isn't going haywire i am a bit....dissapointed that i wasn't able to find a more....elegant way to do so (not cutting the key off, for example) but, it works.
    thanks to all of you who read my post}
    My keyboard's(laptop) "Left" key is broken (due to a water related incident) so i am trying to find a way to completely disable it. I kinda found one using "xmodmap -e 'keycode #=NoSignal' and that solves most of my problem, normally there are no problems and i would be able to type whatever i desire without issues. The problem arises when i have to modify some file for one reason or another from the terminal and i have to go into SU mode, it ask for a password but for some reason my left key "reactivates"  it isn't actually moving my cursor but inserting some other text. It also bothers me when im trying to select something in a right click menu(or any sort of menu that allows for keyboard based selection) that has sub menus in it. I verify xev and indeed even if its not actually doing what it should (for example moving my cursor as a type) it is still stuck (aka spam as if i was holding it).
    So i wonder if there is a method to completely disable my left key?
    apologies for the bad grammar.
    Last edited by Renol (2011-08-29 01:41:48)

    First, think really hard about why you want to disable the PK. If it turns out that you really must change the PK, then do this:
    1. drop the primary key.
    2. recreate the PK with the DEFERRABLE INITIALLY DEFERRED clause.
    This will cause the PK to be created with a non-unique index so that if you disable the PK, you will not get an ORA-1 exception. It will also defer checking and enforcing the PK until you commit. This could eliminate the need to disable/enable the PK.

  • Connection drops randomly for hours at a time, can...

    Hi everyone
    We've been experiencing this problem since just before Christmas and it seems to be getting worse as time passes.
    For the majority of the time everything works fine with great speeds but periodically the connection will drop to incredibly slow speeds (~0.20mbps) for about half an hour and then the connection will just drop out completely. The bizarre thing is, while the speed is slow accessing "bthomehub.home" becomes just as slow as accessing a website and when the internet goes down you simply cannot access it at all. After physically unplugging the hub and powering it back on, internet speeds return to normal only to repeat the cycle a few hours later.
    After getting in contact with BT, they sent us a replacement hub, which didn't help the issue, and they've also said that there's apparently nothing wrong with our line. My first thought was that it is a wireing issue but surely that doesn't explain the fact that when our internet goes down we cannot access "bthomehub.home"? That doesn't make any sense to me at all as we can access it fine when the internet's behaving!
    The downtime also seems to be much worse between the hours of 1am and 5am but will also happen at random times during the day.
    Anyway, I'm at a loss and it appears BT is also so I was wondering if anyone else has had a similar situation and has managed to find a fix.
    EDIT: Forgot to mention I'm using the HH3. I've also realised that disabling the router's Firerwall seems to stop the internet dropping out completely and instead the speed seems to only drop to about 10mbps (we get ~40 normally) which I can certainly live with. Not sure if this will be a long term fix but could it be the Firewall that's causing the problem?
    Thanks
    Solved!
    Go to Solution.

    You could see if BT are willing to supply an HH3B.  People generally seem to have better experience with those than the 3A. Probably best to contact the mods to see if they can help with that.  http://bt.custhelp.com/app/contact_email/c/4951 .  But be aware they take 3 working days to reply: sometimes more if busy. 
    I can't suggest any alternative; it's not perfect but the HH3B has been fine for us.  Main drawback has been the inability to set alternative DNS servers at the router.  There are a few threads about alternative routers.  One active one is http://community.bt.com/t5/BT-Infinity/List-of-Routers-to-replace-Home-Hub-3/m-p/742512#U742512

  • ESMTP connection dropped

    hello,
    We are working with an ASA 5520 and it seems there is an issue with some email messages sent throught it.
    When there are many recipients in the emails the email messages are not sent, and I have revised the server an the only thing I see is connecting dropped.
    When I went to see ASA log and see this log report:
    ESMTP Classification: Dropped connection for ESMTP Request from 'interface': servername/portnumber to outside: IP address/25; matched Class 2: cmd RCPT count gt 100
    tcp flow from interface:servername/portnumber to outside: IP address/25 terminated by inspection engine, reason - inspector disconnected, dropped packet.
    So I think there should be an inspection of ESMTP packets and if they detect an email message sent to over 100 addresses, then the packet is dropped, am I right? if so, what should I do to let those email messages be sent?
    Thank you very much.
    Regards.

    I just looked it up and there is (also to my suprise) a default for this parameter. The complete defaults for ESMTP are these values:
    policy-map type inspect esmtp _default_esmtp_map
    description Default ESMTP policy-map
    parameters
      mask-banner
      no mail-relay
      no special-character
      no allow-tls
    match cmd line length gt 512
      drop-connection log
    match cmd RCPT count gt 100
      drop-connection log
    match body line length gt 998
      log
    match header line length gt 998
      drop-connection log
    match sender-address length gt 320
      drop-connection log
    match MIME filename length gt 255
      drop-connection log
    match ehlo-reply-parameter others
      mask
    To solve that problem you could disable the whole ESMTP-inspection or overwrite the parameter in question as by Jounis direction.
    Don't stop after you've improved your network! Improve the world by lending money to the working poor:
    http://www.kiva.org/invitedby/karsteni

  • Mac OS X lion 10.7.3 Wi-Fi connection Drop Issue

    Hi All,
      I've iMAC OS X Lion 10.7.3 latest version desktop. For couple of months, I'm dealing with dropping wi-fi connection during working. I've look at all the forums and discussions and tried many things to solve the issuse, however, issue still exist.
       Every a few minutes, even during surfing though internet pages, wi-fi connection drops. When you look at the signal level etc.. everything is seems to be fine, but it is not possible to connect internet after close-open wi-fi.
       For a while, connection drop happens again.
       I do not understand why Apple does not give a fix for this while most the customer having such an issue.
      Any one having any idea how to solve this ?
    Regards
    Gokcer

    I have a similar problem.  My Macbook Pro won't keep a constant wi-fi connection, becuase it continues to seek alternative networks even after locking onto a strong signal.  I've reset preferences and started from scratch with all the settings and let the Mac set them by itself, but still it does the seeking.  At home I used to have a direct LAN into my Airport Extreme, but now I use wi-fi on 4G/LTE and I've tried the computer with and without the Airport Extreme, with and without a Cradlepoint, and with various channels and security levels. 
    As has been document probably hundreds of times in these forums, Macbook Pros (my model) and some other Macs have had this issue from either 10.7.2 or 10.7.3 (I've got 10.7.4 right now).  I'm glad you found a solution to your problem, but for the hundreds or thousands of us who've had this problem since last August with no solution from Apple, it's quite frustrating.  I know it's not politically correct to blame the computer when it's been given a defective upgrade with Lion, but let's call it what it is.  I'll side with the numbers.  Either a sudden batch of defective routers showed up from Taiwan, and a group of late 2008 and 2009 Macbook Pros bought them all en masse, or it's the software. 
    So if you still have problems after you get a clear signal, start sending messages to Apple to get it fixed for all of us.  I bring this up for you as an alternative, as I noticed you were running 10.7.3, and the problems started somewhere around 10.7.2 or 10.7.3.  Something to keep an eye on. 

  • AEBS "Connecting to ISP..."

    I have an AEBS (rev 5.5.1) that connects to an ISP via dial-up (there is no broadband where I live). One Airport client computer (iBook G4). I have two issues with the AEBS:
    1) About every 10th connection attempt, it gets into a "Connecting to ISP... Connecting to ISP... Connecting to ISP..." loop. After waiting a minute or two, it does not go away, so I open Airport Admin Utility and reset the base station. Clicking cancel from the Airport menu (the one with the signal bands and the time connected) has no effect. It seems that the AEBS ignores external commands when it gets into this state. Is this a bug ? Is there a later software rev to fix it ?
    2) The logs on the AEBS never seemed to have the correct date or time. Logs can be viewed with the Airport Management Utility. Using the AMU, I reset the NTP server host to time.apple.com. I suppose this is the correct solution for an AEBS that has a continuous connection to the internet, but it caused the AEBS to dial the ISP every 60-90 mins (all night long). Is there a better solution (like not to inquire to the ntp server unless already dialup connected) ?
    Otherwise, the unit works well. Very pleased (other than #1 above).
    iBook G4 (mid 2005)   Mac OS X (10.4.3)  

    According to the Actiontec website, the device is both a DSL modem and an NAT/DHCP router. If your AirPort Extreme Base Station (AEBS) is still configured as a wireless network, it will also be acting as a NAT/DHCP router, which will confuse any clients connected to it.
    I suggest that you first do a "hard" reset of the AEBS. (ref: http://docs.info.apple.com/article.html?artnum=107451) Then, connect your iBook to it's LAN (<->) port directly, using an Ethernet cable, and run the AirPort Admin Utility to configure it. You will want to disable the "Distribute IP addresses" option on the "Network" tab. This way the AEBS will pass-thru the private IP addresses from the Actiontec router to any wired or wireless clients attached to it.

Maybe you are looking for

  • I am unable to transfer my contacts from my ms outlook t...

    i am unable to transfer my contacts from my ms outlook to my new blackberry 8900 curve. how do i go about doing this since i've lost my phone and am handicapped without my contacts

  • Pdf Links don't work

    Hello all, I'm working on my office intranet, and there are links on a pdf (which links to other pdf files, and they all make up our policy and safety manuals). It all works fine on a PC, but I can't seem to make the links work if I open it in Safari

  • When will Apple give us Amazon instant video on Apple tv?

    I have been waiting for a long time for this.

  • Workflow to be set to ERROR Mode

    Hi, We have a requirement where we should set the STATUS of the current workflow to ERROR mode explicitly based on certain Condition. Actually I am using a EXPRESSION as the agent for an ACTIVITY STEP which contains the POSITION ID. Well, now, if I a

  • Reading something into a mike connected to an I-pod

    I'm trying to submit mp3 recordings of my poetry to some internet radio stations, & using a taperecorder & i-mik hasn't worked. I have an i-pod shuffle. someone told me to get a griffin mik, attach it to my I-pod & read my poem into it. Then what I r