Can not kill report job

Hi all,
I uses OracleAS9i and run report services. I kill job id 28 but it show a error:
"Cannot Kill Job with Job ID 28SQL-6550: ORA-06550: line 1, column 13: PLS-00201: identifier 'RW_SERVER.REMOVE_JOB' must be declared ORA-06550: line 1, column 7: PL/SQL: Statement ignored"
I don't know why, can you hep me? Thanks a lot!
Trung

Check http://technology.amis.nl/blog/2892/how-to-stop-running-rman-jobs-in-oem-grid-control
Eric

Similar Messages

Can't kill a job in Reports Server 9i

i have installed Oracle 9ias release 2 patch 3 under winnt.
i review the current jobs queue of my report server and i have a job started since two day ago. i try to kill that job use a command like this
http://servername/reports/rwservlet/killjobid1281?server=servername
and i recieved the following error
can't kill the job with id 1281REP-50125: Excepción obtenida: org.omg.CORBA.UNKNOWN: minor code: 0 completed: No
anybody can help me? i want to kill this job without have to restart the Report service

time for process identification and pskill I think

"can not start a job" issue in AWM

Hi ALL,
I am maintaining my cube from PLSQL with following options
1. buildtype = "BACKGROUND"
2. trackstatus = "true"
3. maxjobqueues = 3
i get following error when i see the "olapsys.xml_load_log" table
***Error Occured: Failed to Build(Refresh) DB_OWNER.MY_ANALYTICAL_WORKSPACE Analytic Workspace. Can not start a job.
Can anybody explain when and why this error occurs? I have wasted a lot of time searching for this issue, but have found no person facing such issue.
Hi Keith, it will be great if you can answer this one.
My database version is 10.2.0.4.0 and AWM version is also 10.2.0.3.0
Kind Regards,
QQ
Message was edited by:
dwh_10g

Applies to:
Oracle OLAP - Version: 10.1 to 11.1
This problem can occur on any platform.
Symptoms
- We have an AW maintenance / refresh script or procedure that contains BuildType="BACKGROUND", so that the AW maintenance task will be sent to the Oracle Job queue.
- When we execute the AW maintenance / refresh script or procedure, we do not get any errors in the foreground, the script/procedure has been executed successfully.
- However when we look into the build/refresh log (see <Note 351688.1> for details) we see that the maintenance/refresh task failed with:
13:29:39 Failed to Submit a Job to Build(Refresh) Analytic Workspace <schema>.<AW Name>.
13:29:39 ***Error Occured in BUILD_DRIVER
- In the generated SQL trace for the session of the user who launches the AW build/refresh script or procedure, we see that ORA-27486 insufficient privileges error occurred at creation of the job.
We see from the relevant bit of the SQL trace that err=27486 occured while executing the #20 statement which is 'begin DBMS_SCHEDULER.CREATE_JOB ...', and the statement is parsed and tried to be executed as user having uid=91:
PARSING IN CURSOR #20 len=118 dep=2 uid=91 oct=47 lid=91 tim=1176987702199571
hv=1976722458 ad='76dd8bcc'
begin
DBMS_SCHEDULER.CREATE_JOB(:1, 'plsql_block', :2, 0, null, null, null,
'DEFAULT_JOB_CLASS', true, true, :3); end;
END OF STMT
PARSE
#20:c=1000,e=1100,p=0,cr=0,cu=0,mis=1,r=0,dep=2,og=1,tim=1176987702199561
EXEC #20:c=65990,e=125465,p=10,cr=1090,cu=3,mis=1,r=0,dep=2,og=1,tim=
1176987702325167
ERROR #20:err=27486 tim=465202984
Cause
User who tries to create a job (executes DBMS_SCHEDULER.CREATE_JOB() procedure) does not have the sufficient privileges.
Solution
1. Identify the user under which the job is supposed to be created. This user is not necessarily the same as the user who launched AW build/refresh script or procedure. Get the corresponding username from one of the %_USERS views e.g. from ALL_USERS.
e.g.
SELECT user_id,username FROM all_users WHERE user_id=91;
2. Identify the system privileges currently assigned to the user by connecting as the user whom the privileges need to be determined, and execute:
SELECT * FROM SESSION_PRIVS ORDER BY PRIVILEGE;
3. Ensure that the CREATE JOB privilege is listed.
The CREATE JOB privilege can be granted in various ways to a user:
- via role OLAP_USER or via role OLAP_DBA (see view ROLE_SYS_PRIVS for what privs are assigned to a role):
GRANT OLAP_USER TO <username>;
- explicitly
GRANT CREATE JOB TO <username>;

Can not print report directly to printer.

Hi,
We are using Crystal Report Server for reporting in our project.
The version we are using is Crystal Report Server XI R2 and Crystal Report Server XI R2 SP 2.
Please kindly advice us on the following issues we faced:
- Can not print report directly to printer.
The print button on the Crystal Report Viewer prints the report to pdf and user have to click "Print" again in the pdf file. This is unusual and not convenient. As we have hundreds of reports to print, is there a way we can print the reporrt directly to printer?
- "Set to Null"
In the default interface of the Crystal Report View, there's is this "set to null" check box that we can not remove. Is there a way to do without it?
Thank you,
Kenny Tew

Morning Kenny,
The printer settings are in server management console. Additionally see what settings you have setup for the printer for the report in the server. If it is setup to use End User printer then check your End user machine settings and make sure the printer is setup as a default printer on his/her machine.
Please let us know how you get along with the issue.
As far as "Set to Null" I am not sure where it is set up. A screenshot of it might help understanding it better?
Many thanks
Regards
Jehanzeb
Edited by: Jehanzeb Navid on Oct 6, 2008 11:07 AM
Is this issue on all computers or only one computer?
I have just tested this on my colleague machine and it asks for default printer and not pdf however on mine I setup for pdf.

Can not print report when using HTML or DHTML

Can not print report when using HTML or DHTML. When I open the report and click the print icon I get a small blank dialog box and then nothing. If I change to activex it works and I can print.
Any Ideas?
Thanks
Jeff

Hi,
I did not come across this situation before. Did you apply any fix packs. Try to check whether its a issue which can be fixed by applying fix pack( try to check release notes of fix pack and see if they mentioned any thing about this).
Thanks,
SK.

URGENT : FRM-41219 Can not find report : INVALID ID

hello all
The same problem i have also posted in forms forum..
i am getting the exception FRM-41219 when calling the report from my form with the method RUN_REPORT_OBJECT.
I m calling the report in my program unit method as follows :
DECLARE
Pl_Id ParameterList;
RepId REPORT_OBJECT;
Vrep Varchar2(1000);
BEGIN
add_parameter(pl_id,'report_parameter',text_parameter,record_block.input_box);
RepId := find_repor_object('report_name');
Vrep := RUN_REPORT_OBJECT(RepId,Pl_Id);
END;
But when i run the fmx .. i get the exception "FRM-41219 can not find report :Invalid ID"
I have checked all possiblities i.e. i have also called the method as RUN_REPORT_OBJECT(RepId) and also RUN_REPORT_OBJECT(ReportName)..but in all cases i am getting the same error..i have also checked the environment variable ..it contains the correct path of my application folder where the report is available.
Kindly help me with this
if any body knows the solution..or the cause for it..please let me know here or contact me on this address
[email protected]
thank you.

Try this:
DECLARE
Report_Id report_object;
v_rep varchar2(200);
rep_status varchar2(20);
BEGIN
report_id:=FIND_REPORT_OBJECT('EMP');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,:REPORT_NAME);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,:REPORT_DESFORMAT);
if :REPORT_DESTYPE='CACHE' then
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
elsif :REPORT_DESTYPE='FILE' then
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,FILE);
end if
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESNAME,:REPORT_DESNAME);
v_rep := RUN_REPORT_OBJECT(report_id);
rep_status := REPORT_OBJECT_STATUS(v_rep);
if rep_status = 'FINISHED' then
message('Report Completed');
else
message('Error when running report.');
end if;
END;
Thanks
Rohit

Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

Hi,
I believe this would be your Prod system, so don't just cancel it but look at the job log. If it is still processing then don't kill it and wait for the change run to complete but if you can see that nothing is happening and it is stuck for a long time then you can go ahead and cancel it.
But please be sure, as these kind of jobs can create problems if you cancel them in the middle of a job.
Regards,
Arminder Singh

FRM 41215: CAN NOT FIND REPORT - Please help

Hi,
I am new to oracle 9i. I am trying to convert the forms in 8i to 9i. While i am doing i have many forms calling reports thru run_product. Now i am changing those into run_report_object. Even though i am getting errors like FRM 41215: CAN NOT FIND REPORT , INVALID REPORT ID.
declare
repid report_object;
v_rep varchar2(100);
begin
repid := find_report_object('mrnr0028');
v_rep := RUN_REPORT_OBJECT(repid);
end;
This is the command i have used. Is there anything wrong, or is there any necessity to specify any particular path for report files.
Pls help me asap.
Thanks

I HAVE CREATE THIS PROGRAM UNIT(WITH LOT OF HARD WORK) FOR CHARACTRE AS WELL AS DEFAULT REPORT
RUNING ON WEB
-----------------FOR CHARACTER REPORT
procedure web_report_c ( type varchar2,parameter varchar2) is
report_id Report_Object;
report_job_id VARCHAR2(100);
report_status varchar2(100);
FILE_NAME VARCHAR2(100);
web_name varchar2(300);
user_name varchar2(30);
BEGIN
user_name:=get_application_property(username);
if type='PRINTER' THEN
report_id:= find_report_object('REPORTNODE');
     file_name:=user_name||to_char(sysdate,'-ddmmyy_hh24miss')||'.RRPT'; --use in case of character mode report
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_EXECUTION_MODE,BATCH);
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,ASYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE,file);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESNAME,'c:\logiWWW\temp\'||file_name); --where u want to save report TEMPRARY
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,'REPSERVER'); --report server name
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,parameter); --passing parameter to report
report_job_id:=run_report_object(report_id);
     report_status:=REPORT_OBJECT_STATUS(report_JOB_id);
               while report_status IN ('RUNNING','OPENING_REPORT','ENQUEUED') loop --checking report status
                    report_status:=REPORT_OBJECT_STATUS(report_JOB_id);
               end loop;
               IF report_status='FINISHED' THEN --if report is finished then make call to report
          --          web_name:='HTTP://logi/'||file_name;
               WEB.SHOW_DOCUMENT('/logi/'||file_name,'_BLANK');
               else
                    MESSAGE('Report has failed. '||'status is -'||report_status);
               end if;
ELSIF type='SCREEN' THEN
     report_id:= find_report_object('REPORTNODE');
     file_name:=user_name||to_char(sysdate,'-ddmmyy_hh24miss')||'.txt'; --use txt in case of character mode report
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_EXECUTION_MODE,BATCH);
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,ASYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE,file);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESNAME,'c:\logiWWW\temp\'||file_name); --where u want to save report TEMPRARY
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,'REPSERVER'); --report server name
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,parameter); --passing report parameter
report_job_id:=run_report_object(report_id);
     report_status:=REPORT_OBJECT_STATUS(report_JOB_id); --checking of report status
               while report_status IN ('RUNNING','OPENING_REPORT','ENQUEUED') loop
                    report_status:=REPORT_OBJECT_STATUS(report_JOB_id);
               end loop;
               IF report_status='FINISHED' THEN --if report status is finished then make call to report
                    --web_name:='HTTP://ORACORP/logi/'||file_name;
               WEB.SHOW_DOCUMENT('/logi/'||file_name,'_BLANK');
               else
                    MESSAGE('Report has failed. '||'status is -'||report_status);
               end if;
end if;
end;
------------FOR DEFAULT REPORT
procedure web_report_c ( type varchar2,parameter varchar2) is
report_id Report_Object;
report_job_id VARCHAR2(100);
report_status varchar2(100);
FILE_NAME VARCHAR2(100);
web_name varchar2(300);
user_name varchar2(30);
BEGIN
user_name:=get_application_property(username);
if type='PRINTER' THEN
report_id:= find_report_object('REPORTNODE');
     file_name:=user_name||to_char(sysdate,'-ddmmyy_hh24miss')||'.RRPT'; --use in case of character mode report
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_EXECUTION_MODE,BATCH);
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,ASYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE,file);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESNAME,'c:\logiWWW\temp\'||file_name); --where u want to save report
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,'REPSERVER'); --report server name
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,parameter); --passing parameter to report
report_job_id:=run_report_object(report_id);
     report_status:=REPORT_OBJECT_STATUS(report_JOB_id);
               while report_status IN ('RUNNING','OPENING_REPORT','ENQUEUED') loop --checking report status
                    report_status:=REPORT_OBJECT_STATUS(report_JOB_id);
               end loop;
               IF report_status='FINISHED' THEN --if report is finished then make call to report
          --          web_name:='HTTP://logi/'||file_name;
               WEB.SHOW_DOCUMENT('/logi/'||file_name,'_BLANK');
               else
                    MESSAGE('Report has failed. '||'status is -'||report_status);
               end if;
ELSIF type='SCREEN' THEN
     report_id:= find_report_object('REPORTNODE');
     file_name:=user_name||to_char(sysdate,'-ddmmyy_hh24miss')||'.txt'; --use txt in case of character mode report
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_EXECUTION_MODE,BATCH);
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,ASYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE,file);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESNAME,'c:\logiWWW\temp\'||file_name); --where u want to save report
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,'REPSERVER'); --report server name
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,parameter); --passing report parameter
report_job_id:=run_report_object(report_id);
     report_status:=REPORT_OBJECT_STATUS(report_JOB_id); --checking of report status
               while report_status IN ('RUNNING','OPENING_REPORT','ENQUEUED') loop
                    report_status:=REPORT_OBJECT_STATUS(report_JOB_id);
               end loop;
               IF report_status='FINISHED' THEN --if report status is finished then make call to report
                    --web_name:='HTTP://ORACORP/logi/'||file_name;
               WEB.SHOW_DOCUMENT('/logi/'||file_name,'_BLANK');
               else
                    MESSAGE('Report has failed. '||'status is -'||report_status);
               end if;
end if;
end;

Can not cancel print job hp officejet 8500 in windows 8

I can not cancel print job for a HP officejet 8500 in windows 8
This question was solved.
View Solution.

Hi,
From the Desktop, hold down the Windows key and press R. Into the Run window, type services.msc and hit enter. Browse down to the print spooler service, right click it and select Properties then click on the Stop button. Now browse to C:\Windows\System32\Spool\PRINTERS and delete the job inside this folder - You may need to click a prompt to gain the appropriate authority to open the PRINTERS folder.
Restart the computer and you should find the document(s) have been removed.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Why I can not find reports object in Jdeveloper

How are you!
I want to use Jdeveloper to generate a report jsp file,but I can not find reports object . How can I do! I have installes Oracle9iDSrelease2.0 in my computer.
Best regards!
Jonan Zhou

If you installed Oracle9iDS then you should have the report object inside the JDeveloper that came with this install (9.0.2). It won't work in a JDeveloper that you installed separatly.

Administrator can not move reports from users' favourites folder

Hi,
I am using BO XIR2. With the Administrator account, I am not able to move the reports from favourites folders of users.
I tried giving all the rights to administrator for the favourites folder, but still the move option is disabled for reports.
I can move the folders inside favourites, but not individual reports inside that folder.
Any suggestions?
Thanks and Regards

As for as i know, we can not move reports of users favorites folder. To control that remove the favorites options for users. So that they can save reports in folders only.
Thanks,
Anil

Form can not connect report service

Dear all,
My application using fileupload utility from demo files form90 and combine with report.
If I not upload some file into IAS server using fileupload utility then I cannot execute command to print a report. It says 'Cannot connect to report server'.
But if I don't run fileupload, it can print the report.
Is it some conflict between fileupload utility and report server?
the code is :
DECLARE
     report_id Report_Object := find_report_object('TRANSFER');
     ReportServerJob VARCHAR2(100);
     vc_rep_status VARCHAR2(100); -- status of the Report job
     vjob_id VARCHAR2(100); -- job_id as number only string
BEGIN
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,SYNCHRONOUS);
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE,CACHE);
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,'iasrep');
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,'p_trfno='||:V_PB_REPORT.FTTRNO ||
          ' paramform=no');
     ReportServerJob:=run_report_object(report_id);
     vjob_id := substr(ReportServerJob,length('iasrep')+2,length(ReportServerJob));
     vc_rep_status := REPORT_OBJECT_STATUS(ReportServerJob);
     IF vc_rep_status='FINISHED' THEN
          WEB.SHOW_DOCUMENT ('/reports/rwservlet/getjobid'||vjob_id||'?server=iasrep','_blank');
     ELSE
          message ('Report failed with error message '||vc_rep_status);
     end if;
END;
pls help me.
best regards
Jansen Hutagalung

Hi Jansen,
The problem could be caused by incorrect PATH or CLASSPATH. Set the PATH and CLASSPATH not in Windows system environment but in default.env file like :
ORACLE_HOME=d:\806_home
PATH=d:\806_home\bin;D:\ias9i\Apache\jdk\jre\bin\classic
CLASSPATH=d:\806_home\forms60\java;d:\806_home\forms60\java\UploadServer.jar
The above ones are just example, edit to suit your environment.
Next, ensure the uploadclient.jar.sig is in the FORMS_HOME\forms60\java and you have set the
archive_jini parameter in the formsweb.cfg as follows:
archive_jini=f60all_jinit.jar,uploadclient.jar.sig
Please try and update the results.
Thanks,
Vinod.

Can not see running jobs from, package

I have a problem with processing parallely runing jobs:
I am creating another immediately runned jobs in a main job. Those two parallel jobs (2 loads from different databases) have to be finished before I run next operation (working out loaded data). Problem is that, after starting those 2 parallel jobs, I can not see them by select from ALL_SCHEDULER_RUNNING_JOBS that is executed immediately after I create those jobs in a package. If I take a look into ALL_SCHEDULER_RUNNING_JOBS from anonymous statement I can see all my running jobs. Let's sum it up:
1/ Start of main job
2/ Running 2 immediately created jobs (load data)
3/ Checking in loop if jobs created in step 2 are still running
3.1/ Jobs are running (ALL_SCHEDULER_RUNNING_JOBS check) - sleep for a
while - It never happens - can't see any running jobs from select executed in
package but can see them in
anonymous statement
3.2/ Jobs finished - start processing loaded data
Can somebody help me with this task?
Thanks alot!
Jakub

Hi,
There is no reason a job should be visible from an anonymous block but not from inside a job. There are two things that may be happening here.
- jobs scheduled to run immediately my not start running as soon as they are created/enabled, you may need to wait a bit before they start running (they will appear in all_scheduler_jobs immediately but maybe not all_scheduler_running_jobs immediately)
- you may be running into privilege issues. Is the user that executes the anonymous block the same as the user that the job is running as (the job's schema) ? If not maybe the job user does not have privileges to see the job (you can grant alter on the job to the user to ensure this).
Can you see the jobs in the all_scheduler_jobs view from within the job with status RUNNING ? If you can see jobs in all_scheduler_jobs as RUNNING but not in all_scheduler_running_jobs then this is a bug of some sort.
Thanks,
Ravi.

Can not open report

I prepared a report in 3.1.36 using Oracle apps.
When a co-worker tries to open it, it has error message: Can not open due to Multiple Outer Joins.
Checked security and disabled fan trap already. Is there anything else to check?

That error is the default error you run into when something is wrong with your print server configuration. Please make sure you followed all the instructions outlined here:
http://www.oracle.com/technology/products/database/application_express/html/configure_printing.html
If you're still encountering issues after following these instructions, please reply back and provide detailed information on your setup: DB version, APEX version, BI Publisher / Apachae FOP version, print URL, etc
Regards,
Marc

Can not print Report to printer

Hello,
I am printing a report using the run_report_object and can not print to printer when the report returns some data.
When there is no data returning, the report prints fine from printer and it prints only the header.
On the other hand, when the report contains data it prints on the screen using the web.showdocument procedure.
I am using Oracle Forms 6i and Report Builder for the report.

When running a Report from a Form using the RUN_REPORT_OBJECT
built-in with the Reports server, you encounter the FRM-41214 error,
and the reports status is TERMINATED_WITH_ERROR.(if you insert a message in loop yo'll see this message)
FRM-41214 indicates that an invalid parameter has been passed to the Report
Server. In this case,it is the DESTYPE that is invalid. SCREEN or PREVIEW is
valid for the reports background engine, but is not a valid parameter for the
Report Server. The correct parameter for the Report Server when the output
needs to be shownin the browser window is a DESTYPE of CACHE.
check all parameter you set
Regards

Can not kill report job

Similar Messages

Maybe you are looking for