Can not restore my iPhone 4 with error code 1611 and can not activate it to work too.

My iPhone 4 can not be activated and when I tried to restore it with itune there is error code 1611 about hardware issue.If anyone ever had the same problem please help.

Have you googled to see what the error code means?  Perhaps that will give you a clue as to how to solve your problem.

Similar Messages

  • HT201210 No matter what i Do it comes up with error code 9 and wil not even find the Iphone 3GS 16GB ....What to do ??

    No matter what i Do it comes up with error code 9 and wil not even find the Iphone 3GS 16GB ....What to do ??
    The Home and Sleep buttom does only promt the Connect to itunes...
    Have closed down anti V and is admin and so on.....
    Regards Martin

    Hello mftoby,
    Error 9 occurs when the device unexpectedly loses its USB connection with iTunes.
    This issue can usually be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    iOS: Troubleshooting USB connection
    http://support.apple.com/kb/TS1286
    iTunes: Troubleshooting security software issues
    http://support.apple.com/kb/TS3125
    Note: For best results and the fastest resolution, it may be best to try the restore on a different computer. This will help isolate if it is an issue with the device or the computer itself.
    Thanks,
    Matt M.

  • How to restore iPhone 3gs with error code 21

    I have an Iphone 3GS. I replaced the battery and digitizer. When I plug in to Itunes the Iphone wants to "restore", but I recieve an error code 21, and it will not "restore.
    Any suggestions?
    Thank you,
    Peter

    Peter,
    In the past, I have had some devices show that error but I was able to simply hard reset the device and it booted fine. 
    Was the phone jailbroken before?  Also, I would make sure you are attempting the restore in DFU mode versus Recovery mode.  It sounds like it is having a conflict with the baseband which is why the device is not allowing itself to boot.  You might also try using TinyUmbrella to fix recovery. 
    If you continue having issues, let me know.  Also let me know if you are using PC or Mac and which OS you are running. 
    Let me know how it goes!  If it doesn't work I may have a few other tricks up my sleeve. 
    Jonathan

  • How to restore iPhone 3gs with error code 1015 ??

    How to restore iPhone 3gs with error code 1015 ??

    The only advice we can give is to try and put it into DFU mode and restore. If that doesn't fix it, buy a new phone.
    There is a reason that Jailbreaking isn't supported. You have just been kicked in the donkey by it.

  • HT4623 I was updating my iPhone 4S when the internet got disconnected. By the time I get connected again it could not restore due to an unknown error code 1611, pls help

    was updating my iPhone 4S when the internet got disconnected. By the time I get connected again it could not restore due to an unknown error code 1611, pls help

    Try:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    Or it could be an Apple problem and you will have to wait.

  • I just bought an iphone 4s. phone service and wifi kept disconnecting and so i restored the phone. i had error code 1645 and 1602. so i stopped the restore. but now my iphone is stuck in the restore screen and is not recognised by itunes or com

    I just bought an iphone 4s. phone service and wifi kept disconnecting and so i restored the phone. i had error code 1645 and 1602. so i stopped the restore. but now my iphone is stuck in the restore screen and is not recognised by itunes or com

    i have restarted my com, re-installed itunes and repeatedly tuned on and off my iphone to no avail. please help!!!

  • How do i fix error code 1611 and restore my iphone 4

    how do i fix error code 1611 and restore my iphone 4

    The music continued to play with the iPod?
    If so, when a call is received while listening to music with the iPod, when the call is answered the music should be paused. When ending the call, the music starts playing again from where is was paused.
    There is no automatic mute with notifications for received email or messages while on a call and there is no setting for this.

  • PSE12 download keeps failing with error codes DF006 and DF016. [was:Question]

    I have purchased elements 12 for my Macbook pro but the download keeps failing with error codes DF006 and DF016.
    What can I do?

    Is there an Exit Code indication that precedes the DF indications?  If so, try searching this forum using that "Exit Code #" substituting the number for #

  • 'The termination occurred in system E03 with error code 403 and for the rea

    hello gurus,
                     i am very new webdynpro for abap.i strucked in one place at the time of designe a webdynpro component.
    i created one webdynpro component with one view.when i am going to design the view it is showing an error like .
    Service cannot be reached.
    'The termination occurred in system E03 with error code 403 and for the reason Forbidden'
    for this we need to activate some service at sicf transaction level.
    could anybody suggest me which service i need to activate to overcome my problem.
    best regards,
    raja.

    If you are creating webdynpro component for first time then check the below link and activate the service mentioned.
    http://translate.google.co.in/translate?hl=en&sl=de&u=http://help.sap.com/saphelp_nw70/helpdata/de/43/e86de5008b4d9ae10000000a155369/content.htm&ei=C56BTqinCMTqrAfr5sycDg&sa=X&oi=translate&ct=result&resnum=1&ved=0CB8Q7gEwAA&prev=/search%3Fq%3Dhttp://help.sap.com/saphelp_nw70/helpdata/de/43/e86de5008
    First check above one.
    this is for understanding
    http://sdnabape.blogspot.com/2010/11/step-by-step-configuration-for-running.html
    Regards
    Srinivas

  • I can not restore my Iphone 4 as an error message keeps coming up with error code 1611 what does this ,=mean and what shoud i do please let me know how to get rid of this and get my phone restored. thank you

    Hi
    My name is Lubna Ruby abd would like help with my IPhone 4, I am unabke to restore my phone as it keeps on coming up with an error message as code 1611,  please help me to solve this error as my phone has gone compleatly blank, if possible please contact me to resolve this matter.
    Thank you

    I bet if you Google "iPhone error code 1611" you'll get a clue as to how to fix your problem

  • SSPI handshake failed with error code 0x8009030c and Login failed for user''

    I got the following error when tried to connect to local machine in the
    non-domain environment with Windows Authentication by SSMS.
    "SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security."
    "Login failed for user''. the user is nothing associated with a trusted SQL server connection."
    questions
    1,if I saw the "SSPI handshake failed ", does it means it must used Kerberos but failed? or it is also possible used the NTLM but failed?
    2,Any ideas for this issue?
    Please click the Mark as Answer button if a post solves your problem!

    Hi Michael,
    Firstly, "SSPI Handshake Failed" error happens usually when connection failed between the server and domain controllers or failed Kerberos authentication. For more details about "SSPI Handshake Failed" error, please review this
    FAQ.
    Secondly, regarding to your error message, it could be caused by loopback check. To resolve the issue, please set the DisableLoopbackCheck registry entry to 1 by performing the following steps.
    1.Click Start, click Run, type regedit, and then click OK.
    2.Locate and then click the following registry subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
    3.Right-click Lsa, point to New, and then click DWORD Value.
    4.Type DisableLoopbackCheck, and then press ENTER.
    5.Right-click DisableLoopbackCheck, and then click Modify.
    6.In the Value data box, type 1, and then click OK.
    7.Exit Registry Editor.
    8.Restart the computer.
    There is a similar blog about your scenario for your reference.
    http://www.bhcblog.com/2009/10/08/fix-for-login-failed-for-user-the-user-is-not-associated-with-a-trusted-sql-server-connection/
    Thanks,
    Lydia Zhang
    If you have any feedback on our support, please click
    here.
    Lydia Zhang
    TechNet Community Support

  • OLEDB select from Analysis Services fails with error codes 0x80040E21 and 0xC0202009

    Hi,
    In IS2008 SP1, I have an OLEDB source component that uses an Analysis Services OLEDB connection to run an MDX statement (set in the "SQL command text" property). This already worked for other cubes with the same MDX statement (apart from different hierarchy
    and cube names) in several other IS packages.
    But in this package, I keep getting the following errors when executing:
    Error: 2011-12-08 14:12:42.70
       Code: 0xC0202009
       Source: myDataflow myOLEDBsource [190]
       Description: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred.
     Error code: 0x80040E21.
    End Error
    Error: 2011-12-08 14:12:42.70
       Code: 0xC004701A
       Source: myDataflow SSIS.Pipeline
       Description: component "myOLEDBsource" (190) failed the pre-execute phase and returned error code 0xC0202009.
    End Error
    As usual with AS OLEDB, you get warnings for all columns that the data type is unknown and hence set to DT_WSTR(255). This is the case for the working packages and for the non-working one.
    And when I click on the "Preview" button in the OLEDB source, I see the three column two row resultset as expected.
    As I found some other posts with similar error messages that could be resolved by changing the 32 bit and 64 bit setting, I tried in BIDS 2008 (32 bit) on Vista 32 bit, dtexec 32 bit on the same computer, dtexec 64 bit and dtexec 64 bit on a Win2008 server,
    all with the same results.
    SQL Server Profiler shows that the MDX statement is executed without errors when running the package. I do not see any relevant difference between the working packages/cubes and those not working. I re-created the OLEDB source component several times, even
    copied it over from a working package, and still have no success.
    I even executed the statements in an XMLA sheet in Management Studio with the PropertyList taken from the trace, without seeing anything obvious in the result.
    Any ideas what I could do to get this working?
    Is there any reference explaining OLEDB error codes?
    Thanks
    Frank

    Hi,
    I finally got it working. Re-creating the connection manager solved the issue. There was no difference between the not working and the working connection in the Connection Manager Editor. When I compared on XML source level in the package, I found that the
    working version contained Format=Tabular in the connection string, while the not working version did not contain this.
    Frank

  • I can't restore my iPhone 4S with error 1611

    i restored my iphone4s and when itunes said "Preparing to restore iPhone" then iPhone screen has Apple logo with bar below it
    the bar didnt fill and then error code just popped up..... how to fix this....

    Hi KiltedTim....I was wondering if you could help me?
    My iPhone has never been jailbroken, but since yesterday my iPhone 4S became a BRICK, nothing less, nothing more.....its so frustrating, cause I hear my alarm, which I cant stop because the only thing on my screen is this message: ''Were unable to complete your.....'' ''This device is not registered as part of the iPhone Developer Program.''
    PLEASE I BEG YOU TU HELP, i'll be forever in your debt.......
    (I tried to restore it in iTunes but it wouldn't let me, I dont know what else to do...)
    Many thanks

  • Why can't I restore my iPhone 4 with error 28?

    My iPhone 4 wouldn't turn on for 3 days, so eventually I plugged it into iTunes - it said the phone was in recovery and that I needed to restore it. After doing this, it gave me the eror code 28 and I have tried everything to restore it?!

    See here http://support.apple.com/kb/TS3694#error28
    These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.

  • TS3694 Can't update iOS7 to Iphone 4 with error code 3004

    Hi Support,
    I can't upgrade my iphone 4 OS to iOS7. Please advise what error code 3004 means.
    Regards,
    Alex Man

    From the article that the question was posted from:
    Network connection or download errors
    Errors 3000-3999 (3004, 3013, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes can't contact the update server (gs.apple.com)  on ports 80 or 443.
    Update to the latest version of iTunes.
    Verify the computer's date and time are accurate.
    Check that your security or firewall software isn't interfering with ports 80 or 443 or with the server gs.apple.com.
    Follow these steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
    An entry in your hosts file may be redirecting requests to gs.apple.com (go to "Unable to contact the iOS software update server gs.apple.com" above).
    Internet proxy settings can cause this issue. If you're using a proxy, try again without using a proxy.
    Test restoring while connected to a known-good network.
    Error 3004: If you're using a Mac, you may be able to resolve an error 3004 by quitting iTunes and using the following command in the command line: dscacheutil -flushcache.

Maybe you are looking for

  • How can I go back to 3.6? I'm thoroughly disgusted with 4.0

    I've been trying to find the buttons for stop, reload, etc., and they are eluded me. In trying different things I then somehow lost my button for bookmarks, and the new orange Firefox button. This thing is a mess. I decided to try loading 4.0 to at l

  • Could someone help me with this error: java.sql.SQLException: Closed Connec

    My code: <%@ include file="../setupcache.jsp"%> <% if(connectionPool_dig==null){ %> <p>Could not connect to database. Please try again, thank!</p> <%                return ; Connection con = connectionPool_dig.getConnection(); if(con==null){ %> <p>Co

  • MPLS TE equal or unequal load balancing doesn't work? - step2

    Previous question in thread: Dear Sir! I've two MPLS TE tunnels from one PE to another PE. And there are traffic share count between them (as tunnel mpls traffic-eng load-share command define). But in real life all traffic from the same source to the

  • How do Import a csv file that contains strings

    I have a file that contains numbers as US formmated $$$  such as $1,123,123,123  I have a perl script on one of our linux servers that creates the csv file as "Total Dollars","$1,123,123,123","some other string","etc"  but when I import the file into

  • Errors with Dreamweaver

    I am running Dreamweaver CS4 on Mac OS X version 10.6.7. When I try to insert an image I get this error: And this is what happens to my code after I push ok: I do have my visual aids on and I also reset my prefrences. Anyone have any solutions for th