I just bought an iphone 4s. phone service and wifi kept disconnecting and so i restored the phone. i had error code 1645 and 1602. so i stopped the restore. but now my iphone is stuck in the restore screen and is not recognised by itunes or com

i have restarted my com, re-installed itunes and repeatedly tuned on and off my iphone to no avail. please help!!!

Similar Messages

HT4848 Hi my name is Hajk and i got a friend that has a problem with her macbook, she gets a blue screen and cant log on. So i told her if she had an reinstall disk so that i could reinstall for her but she didn't get one with the macbook. what can she do

Hi my name is Hajk and i got a friend that has a problem with her macbook, she gets a blue screen and cant log on. So i told her if she had an reinstall disk so that i could reinstall for her but she didn't get one with the macbook. what can she do ?

If this is a fairly new Mac running either v10.7 Lion or v10.8 Mountain Lion she can use Lion or Mountain Recovery to repair the startup disk or reinstall OS X.

G4 450 and protools, somehow ran out of memory to startup. Error code 10. Tried turning off extensions to boot but now just locks up as I tried a HD verify/repair and then moved the folder to the desktop screen. cant get it off now.froze.

Ok, I have a Mac g4, os9. ..450 Processor. I Think I upgraded ram, can't remember. Maybe a 512 card. Added an 80 gig internal HD for music storage. Computer was solely used for protools LE 5. I knew I was kinda close on my memory for running the program after recording things with plug ins etc. It was beginning to get slow at startup. Anyway it's been a couple years since I used it. I got it set up yesterday and it wouldn't launch and kept giving me error code 10. So I replaced the battery and tried again. the small finder icon in middle of screen would then pop up and alternate with a "?". Then it would change to a pict of a hard drive disk and then a me alternating "?". It would still give me the error code if I clicked on anything. So I then held down the shift key to turn off extensions as it had mentionEd to do a couple times. Still would give me the error code on my home page. If I tried to get into my hd which is on desktop it would give me the message, but somehow it did open one occasion and I went into it and scrolled to disk verify and repair. Did it. Said things were fine. I then saved the results in a file which was then offered along with location. I chose desktop. Probably really bad idea in hind sight.. It did it, but now no matter if I turn extensions off, the home screen pops up but then goes blank. The hard drive icon along with the new folder, and my protools icon immediately dissapear. And it freezes. at one point a message did pop up saying finder could not start up because there is not enough memory available. I'm not a computer guy. Ive tried finding the guy who helped me set this thing up 10 years ago but to no avail. If I can be guided to somehow uncover some of the unneeded memory usage I would then learn how to more efficiently use it. How the heck do I even start. I can't get to a screen which shows what's eating my computers space to even start getting rid of unneeded stuff. Please help if you can. I have so much to loose if I can't get it to work. Btw...I no longer have the os9 disk. I think it was tossed 10 years ago or more. May not even have my original pro tools disks anymore. Uggh.

Ouch, tough spot, but offhand I'd say some memory may have gone bad, or maybe just needs re-seating after all this time.
Not much you can do, but try this anyway...
PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/ht1379
In fact, do 3 in a row, takes a bit of time.

SCCM 2012 Deploy --- Error = The software change returned error code 0x87D00324(-2016410844).

Deployment to the client is successful but the error reported within Clients "SCCM Software Center"
The software change returned error code 0x87D00324(-2016410844).
Also States on "Status" Past Due - Will be Retired"
Can't figure this one out and I did some googling with no success in finding a solution?
I am running an Adobe Flash install (.EXE)
Any help or direction would be greatly appreciated
RF

Hi,
Thank you for your response
""Wow6432Node is not valid on x86 systems."""
Yes, that I am aware of that.....Windows on Windows, for running x86 apps on x64 Windows<o:p></o:p>
When I first created the detection method I had only created the "WoW" Check
for Flash value in the reg, which was running against both x86 & x64 Win 7
systems, and forgot to include the x64 check/, either case, the error appeared
on the WOW check. Presently I have 2 "Detection Clauses" one for x86
and the second clause is x64 ( non WOW Path), and still receive the same erorrs
on both x86 & x64 systems. ( and x64 system have both reg entries since Win 7 has both x86 & x64 versions of IE)
Looking at the registry of an x64 Win 7 system I find the Adobe Flash registry entry is
located in both Wow6432Node and also in the x64 sections of the reg.....<o:p></o:p>
""""Also, why use the default value? I doubt there's anything in there (the default value is the
value display in a key in regedit with the name of
"@").""""<o:p></o:p>
When Default Value is selected the boxes/options below that allow for more detailed
information to be entered when performing the "reg check"? This is
where I had been able to enter specific Build/Version to look for, Flash
11.4.402.265, so that if it does not discover the build # it will proceed with
the install.....<o:p></o:p>
I figured having the option to check for Build/Version # would omit SCCM reinstalling on
systems that have build 11.4.402.265 already?<o:p></o:p>
From what I understand is that Adobe Flash x64 installs both versions x86 & x64 since Win 7 has both IE
x86 & IE x64 bit versions by default, and this would explain the Wow6432Node reg
entries and the true x64 reg entries in both locations when installing.
Overall, I am thinking I may be heading in the wrong direction in resolving this, as x86 & x64 versions install on the systems, so this tells me it is detecting when / what needs to be installed, the issue seems to be how it reports back after installing......
Looking further, I view the Content Status Page, and there reporting info in Asset Detail under [Success] all others { / In Progresss / Error /Unknown } has no info......
If this helps provide further details.....
Thanks
Regards,
Ron
RF

My ipod touch is stuck on a white screen and i did everything hold the home botton and sleep botton togher, but it wont respnd it is just stuck on the white flash scree HELP PLEASE!

My ipod touch is stuck on a white screen and i did everything hold the home botton and sleep botton togher, but it wont respnd it is just stuck on the white flash scree HELP PLEASE!

- Let the battery fully drain. The charge for an hour and see what happens, Try resetting too:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Connct to computer and restore if it shows in iTunes.
- You can try placing the iPod in recovery mode and then trying to restore. See:
iPhone and iPod touch: Unable to update or restore
- Also see:
iPod touch: Hardware troubleshooting
Frequenly the white scree is due to a hardware problem.

While I was updating my ipod touch to ios 6 the battery got drained during the process, i tried restoring it, it couldnt now my ipod is stuck on the Apple logo screen.

while I was updating my ipod touch to ios 6 the battery got drained during the process, i tried restoring it, it couldnt now my ipod is stuck on the Apple logo screen.
Can anyone help me with this issue???

Connect your iTouch to your PC then open iTunes, if iTunes does not recognize your device, try to hold the SLEEP Button and the HOME button at the same time (iPod Reset) for a couple of seconds until the "Charging Tone sounds, now you should be seeing your device name in the iTunes " Device List". If you do, just click RESTORE and iTunes will automatically restore your iTouch to original set-up and download the iOS6 update.
Hope this helps..

I jailbroken my ipod and when i try to restore it, its stuck on the loading screen with a skull on it but now i cant even look at the apps or lock it plz up i tried everything pretty much. i tried putting it in dfu and dfu pwn mod

i jailbroken my ipod and when i try to restore it, its stuck on the loading screen with a skull on it but now i cant even look at the apps or lock it plz up i tried everything pretty much. i tried putting it in dfu and dfu pwn mod
< Edited By Host >

Jailbreaking has its consequences and voids the Apple warranry. We can't discuss jailbreading on this Apple forum.

HT4623 I was updating my iPhone 4S when the internet got disconnected. By the time I get connected again it could not restore due to an unknown error code 1611, pls help

was updating my iPhone 4S when the internet got disconnected. By the time I get connected again it could not restore due to an unknown error code 1611, pls help

Try:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
Or it could be an Apple problem and you will have to wait.

Hi, I am worried about the old Iphones, couldn't we change them for another version? I have my Iphone 3, love it, but now I am feeling out of the picture. The phone works perfect...Is there any plan to do so? like recycling?

I am worried about the old Iphones, couldn't we change them for another version? I have my Iphone 3, love it, but now I am feeling out of the picture. The phone works perfect...Is there any plan to do so? like recycling?

You can purchase any model (currently sold) iPhone that you desire.
What's the big deal or so complicated about figuring that out?

HT4623 i have pressed start to install updates, but now my iphone 4 will not stay on, screen showing picture of cable & itunes sign when i attach to computer it only ask me to restore to factory setting and i dont want to lose my photos ect, Thanks Angela

i have pressed start to install updates, but now my iphone 4 will not stay on, screen showing picture of cable & itunes sign when i attach to computer it only ask me to restore to factory setting and i dont want to lose my photos ect,
Thanks Angela

Your phone is in recovery mode. All your data are already gone.

I did an automatic update to my daughter's iphone and it did not complete teh update. I tried to restore my updated setting but now my iphone will not start. I see the apple and a white line that never moves past 15%.

I did an automatic update to my daughter's iphone and it did not complete the update from version 6.0 to I believe 8. I waited for hours but the line stopped at 70%. I tried to restore my old settings but now my iphone will not start. When I try to start the
phone, I see the apple and a white line that never moves past 15%.

Hi JG14usa,
Welcome to the Apple Support Communities!
I understand that you attempted an update on your daughter’s iPhone but the update will not complete. For this type of situation, it may be necessary to place your iPhone into recovery mode and restore. Please use the instructions located in the attached article to complete this process.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Best regards,
Joe

I had my iphone 5c in my lifeproof case in the water and when i took my phone out there was a few drops on it but i didnt worry about it, but now it wont charge at all except to 4% and then it stops and ive had it in rice for 8 days........WHAT DO I DO

i had my iphone 5c in my lifeproof case in the water and when i took my phone out there was a few drops on it but i didnt worry about it, but now it wont charge at all except to 4% and then it stops and ive had it in rice for 8 days........WHAT DO I DO

It sounds like the LifeProof case may have leaked. Did you pay for the Waterproof protection? If so, you can file a claim with lifeproof, pay the deductable, and get a replacement.
If you didn't purchase the Waterproof guarantee, if you have Applecare Plus, $79.00 will get you a replacement. If you don't have AppleCare Plus, then this is a $269.00 replacement lesson.

My iPod Nano (fourth generation) is stuck on a black screen and will not charge. It's done this before and you can still see a faint outline of the green charging sign and the time/date. HELP

My iPod Nano (fourth generation) is stuck on a black screen and will not charge. It's done this before and you can still see a faint outline of the green charging sign and the time/date. HELP

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

When i charge my iphone it has the plug instead of the lightning bolt showing its fully charge but the percentage will stay the same or go down. when i plug it in it turns back on but turnes right back off because its at one percent and it keeps repeating

when i charge my iphone it has the plug instead of the lightning bolt showing its fully charge but the percentage will stay the same or go down. when i plug it in it turns back on but turnes right back off because its at one percent and it keeps repeating the process. if i just try to turn it on it loads the aoole logo the the lock screen then turnes right back off. please help!!! i have a cdma verizion iphone 4 if that matters

Bring your phone into Apple for battery diagnostics.

I tried to eject a cd, didn't work so I turned off the computer and now it keeps getting stuck at the gray screen. How do I fix it?

Here are a few more details. I put in a game cd for a windows computer, once I opened the folder on the desktop I noticed the install application was .exe so I tried to eject the cd but no matter what I tried on the computer it wouldn't come out. I will say though that I didn't try the manual cd eject cause I didn't have anything small to hit the button in the cd drive with. It was getting late so we decided to just turn off the computer and leave it for the next day. I can't remember if we turned the computer off with apple shut down or by holding down the power button but we walked away pretty quickly before it was fully shut down. The next day the computer won't turn on. When I walked into the room I was the computer stuck with a grey background with the apple logo showing and the circular thing under it frozen. Since no one was in the room I held down the power button and turned the computer off. We tried to start the computer again later but again it keeps getting stuck at the same spot. Now when we hold the power button down to turn it off I'm not sure if it's really turning off all the way. The screen goes dark but it sounds like the fan is still going. I tried disconnecting everything but the keyboard and mouse but when I started it up again it got stuck on the grey screen with just the apple logo. I'd really apprechiate help on this cause I live in Germany right now and support call centers work so much worse when you don't speak the language well... Thanks for any help you can give!

Restart your computer while holding down left mouse key. That will eject the CD and your Mac will start as normal.
Lupunus

I just bought an iphone 4s. phone service and wifi kept disconnecting and so i restored the phone. i had error code 1645 and 1602. so i stopped the restore. but now my iphone is stuck in the restore screen and is not recognised by itunes or com

Similar Messages

Maybe you are looking for