CAN NOT waiting for the UI animation/transitions

The worst user experience.
Users can not do anything when the animation is running.
How to turn off or make it faster without jlbrking?
Really useless and annoying feature it is.

Similar Messages

How do I call the subvi in parallel with main VI. Main vi should not wait for the subvi

I have a subvi which takes the parameters like port name, transmit rate, message to transmit over serial port and Start/stop flag. This subvi calls VISA write vi in a loop continuously, till the Start/Stop flag is false, to write a message to serial port at a mentioned transmit rate. This subvi will be called from another VI. Actual intension is to transmit different messages to different ports continuously and stop them when required. In this senario, please provide solution for below points:
1. How do I call the subvi in parallel with main VI. Main vi should not wait for the subvi.
2. How does main vi can control already running subvi in parallel to it. In the above example I would like to start the subvi from main vi when start\stop flag is true and would like to stop it when the flag is false.
3. How do I call the subVI with one set of parameters from main vi, when same subVI is running with other set of parameters already from main vi(subvi being called in a case with different set of parameters each time when the case is called). Means, how do I keep track of reentrant subvi (different calls to same vi)from the same main vi.

Hi Dharani24,
Try if these are helpful,
http://digital.ni.com/public.nsf/allkb/DB92C44E7D4D8A1B862577CB007D9C45
http://zone.ni.com/reference/en-XX/help/371361J-01/lvconcepts/asynchronous_vi_calls/
http://zone.ni.com/reference/en-XX/help/371361J-01/lvconcepts/reentrancy/
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

[Solved] systemd does not wait for the unit to finish

My problem is described in the title. I have made a test by enabling the following unit:
[Unit]
Description=/etc/rc.local Compatibility
[Service]
Type=forking
ExecStart=/bin/sleep 1000
TimeoutSec=0
RemainAfterExit=yes
After=network.target
[Install]
WantedBy=multi-user.target
The unit is well started (a process sleep 1000 exists). But with a type=forking, systemd is supposed to hang in this case. Instead, the graphical.target is launched, systemctl list-units mention it as dead, but the display manager is started before the sleep 1000 completes. Ho can I force systemd to wait?
Last edited by olive (2015-03-16 16:49:34)

olive, now you're making even less sense. I didn't say the sleep example was stupid and I didn't question your reasons for doing/wanting this.
I suggested you add "Before=display-manager.service" and you respond "I added Before=graphical.target and it didn't change anything."
I also tried to explain why systemd has no reason to delay the display-manager.service. You could have asked for further clarification, as berbae has now done. Let's try a longer explanation.
Service startup
Services can be started in different ways, as configured with Type=. This determines when a service is considered "started" (or when the service's start-up is considered finished). When a service reaches this state (some time after being started), units that are supposed to start After= this service will be started (and no sooner).
With simple systemd has no further information about the start-up process. It launches whatever you specify in ExecStart and this is the main process that continues to run till the service stops. systemd assumes this type of service is started immediately. All the other types have some way for the process to indicate to systemd (either directly or indirectly) when it has finished starting.
Actually oneshot is also a bit special and that is where RemainAfterExit comes in. For oneshot, systemd waits for the process to exit before it starts any follow-up units (and with multiple ExecStarts I assume it waits for all of them). So that automatically leads to the scheme in berbae's last post. However, with RemainAfterExit, the unit remains active even though the process has exited, so this makes it look more like "normal" service with
begin of unit/startup ---- end of startup ------ end of unit
This is the relevant behavior for this thread. First sleep starts, then after 1000 seconds, start-up finishes and follow-up units will be started. Then either the unit dies, or (with RemainAfterExit) it stays "active".
The man page describes how "end of startup" is determined for each Type.
Targets
Targets are meant to group units together, to provide synchronization points (and replace runlevels). When you start a target, all its units will be started (in parallel if possible). The man page says:
Unless DefaultDependencies= is set to false, target units will
implicitly complement all configured dependencies of type Wants=,
Requires=, RequiresOverridable= with dependencies of type After= if the
units in question also have DefaultDependencies=true.
This means that (by default) when a target is requested, all it units are started first. Only after all units have finished starting, the target itself will be started (and since the target doesn't do anything by itself, this startup is basically instantaneous). Without this dependency, the order between the target and its units is unspecified, so in theory the target could finish starting immediately while its units are still being started.
Back to olive
graphical.target has these DefaultDependencies, so it is not started until all its units (like display-manager.service) and other After= dependencies (like multi-user.target) have finished starting. Your sleep service has to be started before multi-user.target starts (again due to default target dependencies). So first display-manager and the sleep service are started and after 1000 seconds, the sleep service finishes starting and then (assuming all other dependencies were quicker) multi-user.target is started and graphical.target as well (assuming display-manager didn't need 1000 seconds).
If you want display-manager.service after the sleep service, add a Before/After line to specify that (this was your original goal and my suggestion).
olive wrote wrote:However, units that are parts of the graphical target are still launched before the graphical target become active. I am still unable to completely delay the starts of the graphical target before a specific unit completes.
It should be clear now how this works. "units that are part of the graphical target" can only mean "units that are wanted/required by the graphical target" but that is basically all the units that are started when you boot your system, because multi-user.target is a part of graphical.target. And your sleep service is a part of multi-user.target, so in fact you're saying you want to delay starting the sleep service until the sleep service completes
What you probably intended was to delay all units that are a part of graphical.target but not of multi-user.target until after the sleep service. I can't think of an easy (or even good) way to do this and this post is already too long, so I'll table that for now.

New Mac Mini. Can not boot for the first time.

Hello Mac to all the mini community. I recently buy a mac mini and it is not able to boot for the first time.
The only progress is the apple logo, the grey screen and the loading circle.
I was able to boot in safe mode by holding the power button and plug the power cord and i saw the following message:
'Unable to find driver for this platform: \ACPS\.\n'0/sourcecache/.....
debugger called <panic>
can't perform kext scan: no kext summary
OSD process name correspondling to current threat: unknown
MAC OS Version:
Not yet set
Kernel Version:
Orvin Kernetl Version 11.0.1....
So can you please provide any feedback on how to reslove the issue?
Thanks in advance

A new Mac should already have OS X installed on it and boot right up .....?
Mac Pro & Mac mini Fast Start: The new user's guide to the Mac
You should be able to open the box, plug in the power cord, your Display, Keyboard and Mouse, push the power button and start using it.
If not, then you need to return it or exchange it for one that works properly.

How do I re-install 10.1.1 or 10.1.2? Because 10.1.3 is constantly crashing and I can't wait for the fix.

I upgraded to 10.1.3 last week and have had nothing but problems. The program crashes continually for a variety of reasons, and while I can eventually get it up and running again, I can't isolate the causes of the crashes. I would like to "revert" to 10.1.2 or 10.1.1. How do I do this? ( I don't have the old program saved).
I have been using FCPX since it came out and FCP (the original) since it was introduced. Thanks, John Feldman, Hummingbird Films

This doc should be very helpful – going forward.
Also: If your practice had been to perform routine system backups, you could restore from one of them.
Russ

How can I not wait for a RFC response

Hi everyone, i want to execute an RFC and not wait for the response, i don´t care, so, is there a way to achieve this ? thanks

Hello Isaac,
If you are calling the RFC from WebDynpro then you have to wait for the RFC response. However, there is a way that you can get early response from a RFC.
Suppose you are using RFC1 in your program and it contains business logic. Now, don't directly call the RFC1, instead, write another RFC2 which calls RFC1 asyncronously. This way, when you call RFC2 it automatically call RFC1 and does not wait for any response for RFC1
You can call RFC1 from RFC2 asynchronously:
CALL FUNCTION RFC1 STARTING NEW TASK taskName
Your WD application will immediately get a response from RFC2 while RFC1 still executing.
To know more about asynchronous RFC refer [Parallel Processing with Asynchronous RFC |http://help.sap.com/saphelp_nwpi71/helpdata/en/22/0425c6488911d189490000e829fbbd/content.htm]
Hope this helps
Abhinav

I locked my iPad and I don't want to wait for the time limit. How can I reset it?

My brothers locked my iPad and I can't wait for the time limit to unlock it. Is there a way to reset it?

If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad into Recovery Mode
http://support.apple.com/kb/ht1808

Can't close tab. Don't get an X in tab.ASSERT: Giving up waiting for the tab closing animation to finish (bug 608589) Stack Trace: 0:([object XULElement],[object XULElement],0)

error msg: ASSERT: Giving up waiting for the tab closing animation to finish (bug 608589)
Stack Trace:
0:([object XULElement],[object XULElement],0)

A work around is goto about:config
toggle the following line so that it is set to false.
browser.tabs.animate

Slave instance can not synchronized with the master for a long time

Hi,
Slave instance can not synchronized with the master for a long time, and the gap of LSNs between slave and master are more and more larger. The transfer bytes per second between master and slave is 118MB/s , upper limit to the ethernet card. Why???
ENVIRONMENT:
1. A network program which we called mcdb is based on BDB 4.8.30. It is used to accept get/set requests and then query data from bdb or save data to bdb.
2. mcdb implements replication with bdb replication manager api. The default start replication policy is DB_REP_ELECTION, rep ack policy is DB_REPMGR_ACKS_ONE_PEER and rep priority is 100.
3. The bdb data files, bdb log files, region files and rep files are all in the same home directory.
4. There are two instances of the mcdb are separately on two standalone servers which has no other programs. These two instances are in one replication group which can elect a master automatically.
5. The master instance is online, which has lots of requests (get, set, delete).
ACTIONS:
1. Start two mcdb instances on two servers and the two instance make a replication group. Slave has already synchronized with the master.
2. Stop the slave for a long time (more than 20 hours).
3. Start the slave instance to synchronize data with master.
RESULT:
1. the gap of LSNs between slave and master are more and more larger.
2. db_stat of master and slave:
master db_stat:
467170     Number of PERM messages not acknowledged
9245     Number of messages queued due to network delay
172415     Number of messages discarded due to queue length
25880     Number of existing connections dropped
3407     Number of failed new connection attempts
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
DB_REPMGR site information:
10.67.15.146 (eid: 0, port: 30011)
Environment configured as a replication master
331726/3574994     Next LSN to be used
0/0     Not waiting for any missed log records
328872/466092     Maximum permanent LSN
0     Next page number expected
0     Not waiting for any missed pages
0     Number of duplicate master conditions originally detected at this site
2147M     Current environment ID (2147483647)
100     Current environment priority
49     Current generation number
50     Election generation number for the current or next election
2323     Number of duplicate log records received
0     Number of log records currently queued
6768     Maximum number of log records ever queued at once
55284     Total number of log records queued
120M     Number of log records received and appended to the log (120475988)
111     Number of log records missed and requested
2147M     Current master ID (2147483647)
2     Number of times the master has changed
0     Number of messages received with a bad generation number
8505306     Number of messages received and processed
12     Number of messages ignored due to pending recovery
471869     Number of failed message sends
12M     Number of messages sent (12959945)
0     Number of new site messages received
1     Number of environments believed to be in the replication group
990543     Transmission limited
0     Number of outdated conditions detected
0     Number of duplicate page records received
0     Number of page records received and added to databases
0     Number of page records missed and requested
Startup complete
6244678     Number of transactions applied
0     Number of startsync messages delayed
1     Number of elections held
1     Number of elections won
No election in progress
0.057097     Duration of last election (seconds)
8944103     Number of bulk buffer sends triggered by full buffer
0     Number of single records exceeding bulk buffer size
5273M     Number of records added to a bulk buffer (5273592170)
10M     Number of bulk buffers sent (10490865)
0     Number of re-request messages received
0     Number of request messages this client failed to process
0     Number of request messages received by this client
slave db_stat:
0     Number of PERM messages not acknowledged
0     Number of messages queued due to network delay
0     Number of messages discarded due to queue length
1454     Number of existing connections dropped
0     Number of failed new connection attempts
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
DB_REPMGR site information:
10.67.15.147 (eid: 0, port: 30011)
Environment configured as a replication client
329544/2916048     Next LSN expected
330433/2013808     LSN of first log record we have after missed log records
329543/5500501     Maximum permanent LSN
0     Next page number expected
0     Not waiting for any missed pages
0     Number of duplicate master conditions originally detected at this site
2147M     Current environment ID (2147483647)
100     Current environment priority
49     Current generation number
50     Election generation number for the current or next election
5256M     Number of duplicate log records received (5256599432)
3925284     Number of log records currently queued
3925285     Maximum number of log records ever queued at once
4880561     Total number of log records queued
3578038     Number of log records received and appended to the log
1912297     Number of log records missed and requested
0     Current master ID
1     Number of times the master has changed
0     Number of messages received with a bad generation number
12M     Number of messages received and processed (12980442)
2     Number of messages ignored due to pending recovery
0     Number of failed message sends
1912307     Number of messages sent
0     Number of new site messages received
0     Number of environments believed to be in the replication group
0     Transmission limited
0     Number of outdated conditions detected
0     Number of duplicate page records received
0     Number of page records received and added to databases
0     Number of page records missed and requested
Startup incomplete
110568     Number of transactions applied
80     Number of startsync messages delayed
0     Number of elections held
0     Number of elections won
No election in progress
0     Number of bulk buffer sends triggered by full buffer
0     Number of single records exceeding bulk buffer size
0     Number of records added to a bulk buffer
0     Number of bulk buffers sent
0     Number of re-request messages received
0     Number of request messages this client failed to process
0     Number of request messages received by this client
Edited by: 899585 on 2013-1-4 下午10:54
Edited by: 899585 on 2013-1-4 下午10:55

Hi,
Unfortunately, this issue is beyond the level of what is supported over the forum. Performance related issues are extremely complex and require an in-depth understanding of your environment and dedicated support. In a generic sense, you can look at this as a basic queueing problem. You have a server that went down and work is still coming in. When the server gets started it is possible that it may never catch up depending on new work coming in and the rate at processing the old work.
So what would you do in this case --- one thing would be to reduce the new work coming in. In HA terms this would be slowing the master down and you can increase DB_REP_ACK_TIMEOUT for this. Another thing you could do is add fresh servers to help reduce the workload. In HA terms, this would be the equivalent of restarting the client and give it a fresh look at everything. Another thing you could do is replan the system and load balance. In HA terms, it would mean something like take a hot backup of the master and reinit a client from scratch.
If you are interested in getting a dedicated support person working on this concern, please let me know and we can move forward down that path. Just respond to the thread with your email address and I will get in contact with you so we can pursue that approach.
thanks
mike

I have two hard drives on my mac 10.5.8 power pc and hear the clickking sounds of the first hard drive and think that it may be dying, can I install everything on the other hard drive also and wait for the first drvie to die before i use the other drives

I have two hard drives on my mac 10.5.8 power pc and hear the clickking sounds of the first hard drive and think that it may be dying, can I install everything on the other hard drive also and wait for the first drive to die before i use the other drives? Or, what is the best way to handle this?

I do not know what you are waiting for.
I'd make a backup of your important stuff before cloning the entire disk.
Carbon Copy Cloner will copy your startup drive to an external firewire drive. You can boot from the external drive to verify that you have a good clone. When you upgrade your existing startup drive, you can at any time boot from your external drive and go back to your existing system.
http://www.bombich.com/software/ccc.html
SuperDuper is the wildly acclaimed program that makes recovery painless, because it makes creating a fully bootable backup painless. Its incredibly clear, friendly interface is understandable, easy to use, and SuperDuper's built-in scheduler makes it trivial to back up automatically. And it runs beautifully on both Intel and Power PC Macs!

Can not connect to the internet. This is a new problem since I have been using firefox for years.

I can not connect to the internet. I called mediacom due to the problem and they connected me to internet explorer. They indicated I should contact you for help in connecting to the internet. It appears firefox has made some kind of change since last night since I was using firefox for my internet connection last night. Something has changed. Your help will be appreciated.

http://en.wikipedia.org/wiki/Keyhole_Markup_Language
The only way that file opens thru IE8 for me ''(but not actually in IE8)'' is by using the Zip Utility (then IE closes) that is in WinXP and then opening the two image files in the Windows Fax and Picture Viewer.
I think Firefox is trying to display that file because the MIME-type is for '''''text/plain''''' instead of the appropriate MIME-type of '''application/vnd.google-earth.kml+xml''' or '''application/vnd.google-earth.kmz'''
That is something that needs to be configured in the server that is hosting that file type. Sorry, I don't know how that can be fixed. The one support person here that might know lives in Europe ''(I believe)'', so you might need to wait for an answer.

I WANT TO BUY A MAC BOOK PRO. MUST I WAIT FOR THE ONE WITH RETINA DISPLAY. WILL THE FACT THAT THERE IS NO CD ROAM BE A PROBLEM. CAN YOU USE A EXSTERNAL CD ROAM ON A MAC?

I WANT TO BUY A MAC BOOK PRO. MUST I WAIT FOR THE ONE WITH RETINA DISPLAY. WILL THE FACT THAT THERE IS NO CD ROAM BE A PROBLEM? CAN YOU USE AN EXSTERNAL CD ROAM WITH A MAC?

Apple will gladly sell you a color coordinated and texture matching external SuperDrive to go with your Retina'ized MBP for about $80 bucks.
Note that those models are completely sealed with no serviceable or upgradeable parts inside. So if you decide to bite the bullet, be sure to customize its guts to your heart's content from the get-go as no further change will be possible. This means CPU speed, amount of RAM and size of the solid state drive. Other external options, like the Superdrive, can be added later.

Faxing does not work. Says it's waiting for the driver to connect.

I set up the bluetooth fax printer but when I click to send the fax, it says that it's waiting for the driver to connect.
Any ideas?

If you don't have a land line you can't fax without a system like eFax which uses e-mail to send faxes to a phone number. If you have a land line, you must tie up the land line to connect to another phone number to Fax to it.
You can probably also fax over VOIP based lines, but not all have a strong enough signal for faxing. Check with your VOIP carrier if you have one if Faxes are supported. Regardless, the Fax capability of any multifunction printer or scanner is only operable through an actual phone line. VOIP offers phone line to internet capability.

LATINOS ARE SCREWED with final cut pro x. Everytime I use tildes like á for example. FCPX freezes and restarts.... really is a bummer. And on a side note, Color Curves? 3 Wheel Color Wheels? XML support? Can´t wait for multicam. God Bless!

With final cut pro x. Every time I use tildes like á for example. FCPX freezes and restarts.... really is a bummer. PLZ FIX. Here in Colombia I can not use FCPX for projects which involve names or text. (ALL PROJECTS)
And on a side note, Color Curves? 3 Wheel Color Wheels (color board is great, but i didnt read a 400 page book on 3 wheel color correction for nothing) ? XML support? Can´t wait for multicam. God Bless!
FCPX IS GREAT. It really is. Just a few features are required.....

w andrewfromjupiter wrote:
Tildes can be both
I think the idea that an acute accent can also be called a "tilde" is total nonsense.
http://en.wikipedia.org/wiki/Tilde
http://en.wikipedia.org/wiki/Acute_accent
But good idea to report the bug here:
http://www.apple.com/feedback/finalcutpro.html

What is a quick alternative to launching an enterprise DPS app if Apple Store rejects the App? We are under a major deadline and can't wait for Apple. We want to host the app elsewhere. How do we host our DPS app on our client's website?

What is a quick alternative to launching an enterprise DPS app if Apple Store rejects the App? We are under a major deadline and can't wait for Apple to approve. We want to host the app elsewhere. How do we host our DPS app on our client's website? Thanks.

Unless I misunderstand the question, you can't do what you're asking to do. Apple doesn't allow you to bypass their store and host public apps on a website. The exception is an enterprise app, which requires an Enterprise account with both Apple and Adobe. This type of enterprise app can be distributed only within the company. If that's what you want to do, you can learn more here:
Digital Publishing Suite Help | Creating viewer apps for private distribution
Distributing enterprise iOS viewer applications with Digital Publishing Suite | Adobe Developer Connection
Another option is to add the development app to several devices and use those for your demo.

CAN NOT waiting for the UI animation/transitions

Similar Messages

Maybe you are looking for