Can't Add WCCP v2 Service

Hi,
I've got virtual WSA (v7.7.5-194) and I'm trying to add new WCCP service for https traffic.
But the web GUI is refusing every single Dynamic service IDs I enter (70, 90, ....).
Any idea what could be the issue?

Hi, just figured out what is the problem - I already had static (web-cache) group configured for http traffic.
I wanted to add 1 dynamic group for https traffic (port 443) and WSA refused it.
Static group has to be deleted before you can create dynamic group(s).
Problem solved

Similar Messages

  • Can't add Office Online Services account to Outlook 2010

    Yesterday, one of our employees changed his webmail password, what it's necessary when that password expires, every three months. But now Outlook don't accept his new password.
    I've checked the password again, changed it to another one, deleted the email profile from windows and created another one, but without success...
    Have someone any advice to solve this? Thanks in advance!

    Hi,
    What is the error message that you get when Outlook doesn't accept the new password? What is the account type?
    The issue may be caused by the corrupted credentials cache, I suggest you remove the credentials from Windows Credentials Manager, then re-add the account to Outlook, check if then the new password can be accepted:
    1. Launch the Credential Manager (from [Control Panel] and [User Settings])
    2. In the Windows Credentials
    section you’ll see a setting for [MS Outlook]. Click the downward-pointing arrow to the right of that value
    3. The section will expand to show further details. Under those details is a link to Remove from vault. Click this and Outlook will no longer have a stored copy of your password
    Hope this helps.
    Regards,
    Melon Chen
    TechNet Community Support

  • I can't add a database service for a listener.

    HI!
    I used the netmgr to configure the listener,when I choosed a listening address and clicked "database service" on the dropdown list of the netmgr window,it prompted out a window with the message---------A valid "Log File" is required,and here is the message from the terminal:
    [oracle@rht db]$ bin/netmgr
    Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException
    at java.util.ListResourceBundle.handleGetObject(ListResourceBundle.java:107)
    at java.util.ResourceBundle.getObject(ResourceBundle.java:319)
    at java.util.ResourceBundle.getString(ResourceBundle.java:285)
    at oracle.net.mgr.container.NetStrings.getString(Unknown Source)
    at oracle.net.mgr.listener.ListenerGeneral.setFocus(Unknown Source)
    at oracle.net.mgr.listener.ListenerGeneralParameters.setFocus(Unknown Source)
    at oracle.net.mgr.listener.ListenerConfigure.itemStateChanged(Unknown Source)
    at oracle.ewt.lwAWT.LWDataSourceChoice.processItemEvent(Unknown Source)
    at oracle.ewt.lwAWT.LWChoice.processItemEvent(Unknown Source)
    at oracle.ewt.lwAWT.LWDataSourceChoice.processEventImpl(Unknown Source)
    at oracle.ewt.lwAWT.LWChoice.processEventImpl(Unknown Source)
    at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
    at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
    at oracle.ewt.lwAWT.LWDataSourceChoice.fireItemEvent(Unknown Source)
    at oracle.ewt.lwAWT.LWChoice.fireItemEvent(Unknown Source)
    at oracle.ewt.lwAWT.LWDataSourceChoice$ListListener.mouseReleased(Unknown Source)
    at java.awt.Component.processMouseEvent(Component.java:5501)
    at oracle.ewt.lwAWT.LWComponent.processMouseEvent(Unknown Source)
    at oracle.ewt.lwAWT.LWDataSourceList$Content.processMouseEvent(Unknown Source)
    at java.awt.Component.processEvent(Component.java:5266)
    at java.awt.Container.processEvent(Container.java:1966)
    at oracle.ewt.lwAWT.LWComponent.processEventImpl(Unknown Source)
    at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
    at oracle.ewt.event.tracking.GlassMouseGrabProvider$Disp._redispatchEvent(Unknown Source)
    at oracle.ewt.event.tracking.GlassMouseGrabProvider$Disp._redispatchEvent(Unknown Source)
    at oracle.ewt.event.tracking.GlassMouseGrabProvider$Disp.mouseReleased(Unknown Source)
    at java.awt.Component.processMouseEvent(Component.java:5501)
    at oracle.ewt.lwAWT.LWComponent.processMouseEvent(Unknown Source)
    at java.awt.Component.processEvent(Component.java:5266)
    at java.awt.Container.processEvent(Container.java:1966)
    at oracle.ewt.lwAWT.LWComponent.processEventImpl(Unknown Source)
    at oracle.ewt.event.tracking.GlassMouseGrabProvider$Proxy.processEventImpl(Unknown Source)
    at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
    at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
    at java.awt.Component.dispatchEventImpl(Component.java:3968)
    at java.awt.Container.dispatchEventImpl(Container.java:2024)
    at java.awt.Component.dispatchEvent(Component.java:3803)
    at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
    at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
    at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
    at java.awt.Container.dispatchEventImpl(Container.java:2010)
    at java.awt.Component.dispatchEvent(Component.java:3803)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
    at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
    What should I do?
    Thanks!
    Huang

    Thanks!
    Of couse,it's a good way,but I just want to know the answer.
    Huang

  • How can i add my outlook email to my ipad without useing the Exchange Service?

    Please help me in this, How can i add my outlook email to my ipad without useing the Exchange Service?

    I'm afraid you've posted in the wrong place. This is a technical forum around a particular product called 'SharePoint'. This does talk to Exchange and Outlook in places but we don't specialised in either of those. You should have a look for one of the
    generic Outlook support forums or contact your IT department if it's a work related account.

  • Can I add cellular service on an iPad that only has wifi?

    i want to add cellular service to an iPad I originally bought with just wifi. Is that possible?

    You can't add it to the 'guts' of the iPad. It's a sealed system.
    What you can do is go for a device like a Mifi. It's a battery operated portable wifi hotspot that you can then connect your ipad to.
    I believe that every major provider has their version of the device so look for hte provider that offers you the best options and go from there.

  • Can't add data source in Provider Services

    I have upgraded from 9.3.1 to 11.1.1 Everything has been configured. When I go into Excel, I see the addin and click on the add-in it opens the provider services window and I see the three options, but I can't add a data connection. Any ideas at what I am doing wrong?

    I figured it out. I somehow wound up the format of my cell to pop-up menu, not automatic or text or whatever. Problem solved! I think it's dumb how I randomly wound up like that, though, and find the very feature (pop-up menu), itself, dumb.

  • Can we add custom Service Component categories?

    Hi Experts, when we open up the Business Service form, and then navigate to the "Service Components" tab, we're able to add a Category in the Service Components section of the form, when we click "Add Category", we're presented with a
    list of 8 default categories to choose from -- Can we add to this list our own custom categories?
    Thanks!
     

    Hi David,
    You should be able to, using the same technique as I use in this blogpost to add list items to the Knowledge Article Status list:
    http://www.scsm.se/?p=1287
    Give it a try and ping me here if you need more help!
    Regards
    //Anders
    Anders Asp | Lumagate | www.lumagate.com | Sweden | My blog: www.scsm.se

  • Master Data Services - Can not add new User and MDS can not Identify LOCAL Users

    Team,
    We are using  SQL Server 2008 R2 and system working since long and suddenly we observed mentioned two issues. The server MyServer is already restarted but did not help.  The MDS installed and configured on SAME Machine (MyServer).
      I  have two issues here.
    1. MDM website can not Identify the local Users (MyServer\MyUser).
    The User created on local Machine (MyServer\MyUser). I logged into MDM website using Admin login and click on User and Permission. Then I click on add and Text box appears to type UserName. Here I type "MyServer\MyUser" (MyServer\MyUser is already
    exists and working since long). Then click checkName; I received a message "No exact Match was found for MyServer\MyUser". Where as User from OTHER domain identified in MDM but could not identify ONLY the local users like "MyServer\MyUser".
    2. Can not add new user in Existing working MDM.
    I created windows user on machine (MyServer\MyUser1) and add it in UserGroup having an access to MDM. and then I tried to login to MDM using newly created user (MyServer\MyUser1) ; I see error Access Is Denied. The Permission assigned to UserGroup (not
    to individual user). The new User (MyUser1) should automatically get added in MDM once logged in. This is working for existing users in UserGroup; BUT NOT ONLY for new user (MyUser1).

    Now I Solved this problem in my case.
    I just grant again all permissions according http://msdn.microsoft.com/en-us/library/ff486994.aspx. Now all work fine.
    Hope, it will help 

  • Can't add a family member to family share on icloud?

    I Successfully added one child to family share but when I went to add second child it gets hung up on the screen where you type family members email. I type it in or select child's name from my list of contacts and then select NEXT. Nothing Happens. the blue letters of next fade to the light blue then the circle thing spins and the NEXT pops back up in blue and nothing happens. Can someone please help me figure out why I can't add a second child. Yes, they have an icloud account, I turned phone off and back on. Not sure what the problem is.

    See if you can go to your Calendars App and select a previous event to see what Calendar the event was added to (iCloud or Yahoo). After that is determined you can go to www.iCloud.com or calendar.yahoo.com and add the event there to see if it will populate on your device. Another troubleshooting step is deleting the iCloud account from your device and also deleting the Yahoo account. Then check to see if you can add an event without it syncing to a email. If you can then it may have just been a bug and you can add both accounts back and try adding the event again. I would also recommend only using one service to sync your Contacts, Calendars, Reminders, etc. Such as either iCloud only or Yahoo only, as using multiple accounts means your data is spread around and can be hard to isolate when something goes wrong.

  • Can not add Exceptions to Transparent proxy

    Hello all,
    I am sure this is simple but I can not figure out what has changed to cause this. Currently, I can not add items to the exception list in HTTP Transparent Proxy.
    I only see refresh and close buttons on the screen - no Apply changes.
    I have 2 BM servers and one I have access to without issues but the other does not work.
    It definitely worked at some point in time because it has 25 entries but has since stopped.
    What am I missing?
    Thanks,
    Steve D.

    sjdimare wrote:
    > Here are the details:
    >
    > Both servers are identical in configuration (other than ip addresses):
    >
    > NW 6.5 SP7 and updated TCP
    > BM 3.9 SP2 (tweaked per CJ website)
    >
    > Both servers exist in their on OU which is partitioned
    >
    > The server that is working currently only has 17 exceptions but I do
    > not think it is a # of exceptions issue.
    >
    > While in iManager, if I select Proxy Services, on the main page the
    > buttons on the bottom of one server shows "Apply Changes, Backup and
    > Close" while the non-working server only has " Refresh and Close". This
    > seems to indicate to me that their is a rights or roles issue in
    > iManager that did not exist before but I can not figure out where.
    >
    > Thanks for your assistance.
    >
    > Steve D.
    >
    >
    1. Tid 3506678. Apply Changes button is missing in the iManager server
    configuration proxy screen
    Be aware of the issue when you manager a bm server from non local
    iManager instance. Tid 7001625:Apply changes button not submitting changes

  • Can I add my existing, licensed apps to my list of 'Purchases' on the Mac App Store so I don't have to buy them twice?

    Hello,
    I was wondering if I could add my existing, licensed apps to the list of app 'Purchases' that I have on the Mac App Store.
    The reason for this is that I recently suffered the inevitable hard disk failure and I had to rebuild my MacBook Pro from scratch (with the help of Time Machine and Migration Assistant, etc.). As usual, I hadn't really maintained my MBP for quite a while and things sort of got away from me, in terms of data, apps, preferences, permissions, users (my personal account, my wife's account, my old work account...), etc.
    So I wanted to rebuild my MBP on a clean slate. I like having the ability to quickly download and install just the right apps that I "really" need from MAS safe in the knowledge that:
    they are there (assuming they're still available through MAS) with a full description of what they do and when I bought them, etc.
    they are going to be in the most up-to-date version,
    I'll be able to download and install them cleanly with no corruption from years of multiple user preference changes and permissions, etc.
    that they will be managed and maintained (updated) through the same mechanism,
    so much more.
    The benefits of having apps from MAS are easy to see when compared to going through my downloads folder and emails looking for the latest installers, working out what they're for in the first place, finding the license key in some forgotten e-mail, etc.
    I am aware that I can build a clean machine and then restore just the right apps in their most up-to-date version as I had them on my backups.  The one thing to say about that is that the apps may have been used and abused once too many times and their preferences, etc. may not be in the most desirable form. It's just not as elegant as the MAS solution.
    I realise that not all apps, app versions, or app vendors, are available through MAS. But I still have a fair few apps currently available on MAS that were bought prior to the existence of MAS, prior to them becoming available on MAS, or were bought directly for some other reason (by mistake).
    So I wondered if there was any way I could convert my legitimate licenses from simply a direct purchase to one through MAS and have those apps listed under my 'Purchases' list. It would reduce the amount of work I'd have to do, not only to rebuild my machine but also to maintain it.
    I cannot find any reference or way of having this work the way I would like it to. But I was hoping that some Apple guru would enlighten me.
    I have thought about the possible mechanisms something like this would need to work and I must admit I see some not insurmountable issues (not as much technical as legal or possibly logistical). I realise that MAS is a service in its own right and as such has its own Terms, Conditions and Licensing that may not be compatible with the licenses that I already have. I also realise that when I purchase an app from MAS that I'm paying for the entire service including updates and use on multiple machines that I may own, etc. Obviously I do not want to pay the full purchase cost again for the same app twice, but I am willing to pay a small conversion/upgrade fee to have it managed as part of my 'Purchases' on MAS.  Think of it in the same terms as iTunes works.  I can purchase music, etc. but I can also add my own CD collection and have it managed by iTunes and store it in the cloud should anything go wrong with my local machine, etc.
    So if this is currently not possible, then for the Apple MAS product managers out there, consider this as a suggestion/feedback.  I'd be happy to discuss my thoughts in more detail about not only how to achieve this for now but also for the future when you may add existing applications to MAS that people may have previously bought direct and would like to have managed through MAS going forward. The benefits to the users are hopefully clear, but from Apple's perspective I hope that you can see the advantages too, commercially, etc.
    PS: I apologise for the wordiness of my query and overuse of 'etc.', etc.

    Can I add my existing, licensed apps to my list of 'Purchases' on the Mac App Store so I don't have to buy them twice?
    No. Only apps purchased from the App Store can be re downloaded for free including updates.

  • I recently updated my iPhone 4s to ios6, and lost 1200 odd contacts. I have a backup from about 4-5 months ago avaiable.  Can I add/update contacts from the back up rather than restore which i assume will literally delete any new contacts added...?

    I recently updated my iPhone 4s to ios6, and lost 1200 odd contacts. I recently sold my macbook air and also my mac book pro, so have no recent backups avaiable.  I have a backup from about 4-5 months ago available on an external hdd as a time machine backup.  Can I add/update contacts from the back up rather than restore?  The reason i wish to do this is because in the update i didnt lose any messages, so all of the people i have met and networked with since that last update those many months ago, i have in my messages listings.  They are all unidentified numbers at present but over time i will be able to work through the messages and based on the conversation recall who each was with.  Also, yesterday, some two weeks after the update had left my contacts list entirely empty... a vast majority just reappeard, though all of them are without any phone numbers, all just emails or facebook contacts.  This is the work of facebook not mac/ios6 isnt it...?  Any help here would be greatly apprecaited.  I am about 2 days from flying to canada and having those contacts would make life a lot easier.

    You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup.  If you haven't been doing this, start now and then restore your old backup.  You will then be able to sync the new contacts back into the phone.  However, you will lose all messages, etc newer thant the backup.

  • My spooler won't stay running, I can't add printers.

    My spooler won't stay running, I can't add printers.
    Not able to figure out even after firewall on/off, network on/off and all setting to default...
    Regards
    Reddy

    find some possibility solution for spooler wont start here
    https://social.technet.microsoft.com/Forums/en-US/d875ab83-1b17-4a28-8738-e67249a2bdfd/cannot-print-after-update-to-81-printers-gone-print-spooler-keeps-stopping-cannot-add?forum=w8itprohardware
    I recommended this step
    1. do printer troubleshooting
    http://windows.microsoft.com/en-us/windows/printer-problems-in-windows-help#fix-printer-problems=windows-8&v1h=win8tab3&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1
    2. Uninstall antivirus using removal tools (Kapersky)
    3. Registry trick as
    JSB43211 suggested, backup your registry before perform this
    1. Open Regedit as Administrator 
    2. Find the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\ key. 
    3. If you are on a 64-Bit machine, browse to the "Windows x64" sub-key (else "Windows NT x86") 
    4. Under the "Print Processors" sub-key DELETE ALL THE SUB-KEYS EXCEPT "winprint" key 
    5. Start the Print Spooler service. 
    6. Test to see if you can Add a printer. 

  • Can't add a new address card to Address Book

    Hi!
    Well, I searched and searched the site all over and haven't found any info about this, so I hope I'm not repeating. When I open my address book app and try to add a new card the options under file for "New Card" and "New group", etc. are dimmed and not available and I cannot add any new addresses.
    I tried to add addresses out of the "previous recipient" under "window" in the Mail app but it marked it as added and then didn't add it -- it was not in my address book when I checked.
    I also tried to throw my address book preference lists in my user library in the trash, emptied the trash and then restarted and it still would not work. ( I am the only user on this computer)
    I recently had a reinstall done of my OS X (i'm running 10.4.3) which was done by the guys at my Apple store and I THOUGHT it was working -- although frankly this was not something I checked -- I just saw that my addresses were there. [I had had them do a reinstall because I was having trouble with my Help files working, but that is a very long, sad story...] The only other thing I have done is to install the most recent security update 2005-009 using the software update, but again I'm not sure that this problem was not present before that since I had not tried to add an address.
    I even threw out the cache from my user library for the address book that says Metadata (after I printed out my addresses on paper, just in case -- I don't have hundreds and i can manually add them back if needed) Restarted -- and oddly enough there were my addresses in my address book just as if I hadn't trashed them. But I still could not add any new addresses.
    I also ran a check on my fonts with Font book and one was found to be defective so I deleted it and restarted -- no effect.
    What can I do? I haven't had any of this type of problem before and I think the guys at my Apple store are probably getting tired of seeing me! Thanks for your help!
    Quicksilver G4   Mac OS X (10.4.3)  
    Quicksilver G4   Mac OS X (10.4.3)  

    The address book database is stored under the user's home folder in library>application support>AddressBook>AddressBook.data - i would save that some place safe (RW CD) and then delete it or move it to see if Address Book regains it's functionailty. If so that means one of the files might be corrupt. Add them back one by one and see if you can have contacts and functionality.
    Alternatively you can also try, repair permissions, check disk etc from disk utility (utilities folder), and you can also try reinstalling the 10.4.3 update, i would suggest a fresh download of the combo update (yes i know it's big but it has worked wonders for me in the past).
    If all else fails the apple shop should offer a free follow up, usually if there are still problems within a time period after getting it back they will re-service it for free.
    Hope that helps, keep us updated
    DKR

  • How can I add contacts in my iphone that are backuped in a pim file in my pc

    how can I add contacts in my iphone that are backuped in a pim file in my pc

    You have to get them from the file you have into iCloud, google, yahoo, outlook.com, AOL, an Exchange server, or some other service the phone can sync with, or into MS Outlook on your PC. Then you can sync them to the phone.

Maybe you are looking for