Can't cancel a print request?

Set up a remote printer with the netstandard.
lpadmin �p p5net �v /dev/null
lpadmin �p p5net �i /usr/lib/lp/model/netstandard
lpadmin �p p5net �o dest=p5 :9100 �o protocol=tcp
enable p5net
accept p5net
Everything works fine, but when I disabled the printer queue with "disable p5net" and then sent a few print requests it is not possible to cancel the print request.
Has anyone a idea on how to fix this.
Thanks
Iwan Celissen

Delete the printer from System Preferences (under the Apple menu) > Print & Fax. Then add it back again.
Best of luck.

Similar Messages

How can I cancel my return request

How can I cancel my return request?

Call the Apple Store, if you are referring to a request for return for refund, or Apple Support, if you are referring to a request to send in a product for repair, and let them know you no longer wish to return your product.
Regards.

How can I cancel a printing task?

I began printing a tex in a HP Photosmart Premium from my iPhone, but I realized that the text is too long (97 pages). How can I cancel this printing?

Double press the home button on the iPhone and it will reveal Print Center. You can cancel the print job there. The printer may have a red 'x' that is shown while printing. This red X will also cancel the job.
I was an HP employee.
Please mark the post that solves your problem as "Accepted Solution"

Can we cancel the print out of a scheduled report?

Suppose a report is scheduled and configured to printer.
We want send a cancel command to the printer.
how can this be done?

Hi Sriram,
Once you send any request to printer it will take it into printer buffer. You can't pass any command to cancell the printer buffer. You will have to go in printers and cancell the print job.
If you switch off the printer also the print que will wait till the printer comes in ready mode.
You will have to change the configuration of the scheduled report.
Hope this will help you.
Thanks,
Sastry

I just upgraded and now can't cancel a print job.

The icon to delete is not there anymore. It was so easy to cancel. I'm trying to print a photo and it wanted to print on paper. That mistake will waste a lot of ink, so I want to cancel the job, but can't. Of course, I could unplug my printer, but obviously I don't want to have to do that every time I want to cancel a job. Help!

No it's not, that's the reason you should click the x if you want to cancel a print job. If is has already started, pausing it will pause a partially finished job. Subsequently canceling it may cause corrupted print output or a communications error the printer ought to handle.
If there is nothing in the print queue then the job has already been sent to the printer and your Mac is finished with it. In that case, use the printer's front panel control to cancel the job.

Pinter won't print; can't cancel failed print job; cannot print anything

If I try to cancel a print job, the printer dialog box claims the print job is being deleted, but it never is. The only nway I can get rid of the message and clean up the print queue is to reinstall the printer. This is absurd. HP's help is anything but. What is the problem. I have a Deklsjet 1660.

Debra,
Look at my solution just above your post. Go here:
http://support.microsoft.com/kb/290301/en-us
Scroll to the bottom of the page for the download link, and download it to your desktop. The link looks like this:
Download the Windows Installer Cleanup Utility package now.
Double click the icon that is on your desktop to install it. Startt eh program through "start", then "Programs".
Find Adobe reader in the list, highlight it and click the "Remove" button.
Got to www.adobe.com and download Adobe Reader to your desktop, and install it. You should be good to go.

How can I cancel the return request

i order an iphone 6 then i send a return request but then today arrived so now i want to cancel the return request

Call whoever you sent the return request to (your carrier? Apple?) and tell them you want to cancel the return request.

HT1918 how can i cancel one pending request of add money

i put some money in my credit card. im in china. but the softwear of the bank of china is all in chinese so i didnt succed in finishing the request to add money. now i have 4 requested to add money in pendinng. i arange whit one friend of mine to help my whit his account to by one application, but i have to change the country from china, that was automatic selection when i made id, to my country romania. pls cant you delete this 4 request???

i contact the bank. they say no bank order was rich untill them. but i have some bank oredrs in pending and i dont now how to get ridd of them in oreder to change the country or region. other posibility is not existing??? plss

ME9F : no update message 'NEU' when user cancel the printing

I use transaction ME9F and when the user click on the button Output message, a specific program is called.
A popup is displaying in order to display a choice for the user. He can choose print Original document or Copy and he can also cancel the printing.
But when he cancel the printing the message NEU is OK (green cross) but the PO is not printed.
Do you a solution for not changing the message NEU when the user cancel the printing.
Thanks for your help.
Best regards.

Hi ,
u need to check ur driver program , if its standard SAP , then u need to change driver program.
Regards
Peram

'Send Print Request' button can send paystub output to R/3 print spool:

Hi
Portal Experts
Current state of the SAP environment on ECC 5.0 and EP 6 SP17
'Send Print Request' button can send paystub output to R/3 print spool:
When I clicked on send print request, I expected a printout to my default printer but didnt get one. If the dialog user has the 'print immediate' option turned off, their paystub will spool up in R/3. When a user clicks on the printer ICON within Adobe, they get to choose their printer and know that it will go straight to the printer. This could be confusing to R/3 dialog users.
Any solution,How to change the option from spool to print immediate.
Thanks
Vanteru

Facing the same problem.
Please let me know if you have found a solution.

On device control panel HPofficejet 6500 E709n keeps coming every time i turn printer can't cancel

On device control panel HPOfficejet 6500 E709n - Align printhead keeps coming up the cancell button is lit up and I can not cancel this action.   I turn off the printer and it still comes up and I can do anything on the control panel
thanks    Delores    [Edited for Personal Information]
This question was solved.
View Solution.

sabretooth04 wrote:
OK, relax. We got the original problem fixed now this.   So as not to duplicate or make any mistakes please go here.
http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&cc=us&dlc=en&lc=en&pro...
This should be your printers support page.   Please click on the links and follow what HP has set up for troubleshooting to see if we can't get it back up and running. You may have to read most of the links and steps to see what works. Let us know.
Can i use the link again - I was printing thank you cards and one jamed and i corrected the jam an then my black would not print again.   I wrote and thanked you and could not thank you enough gave the thumbs up NOW I AM IN THE SAME SPOT
AGAIN i DON'T KNOW WHY IT WOULD NOT PRINT - i HAVE PURCHASE 2 COLOR INK AND NEED MORENOW AGAIN. WHAT DO U SUGGEST I DO i LIKE THS PRINTER - DO I NEED A NEW PRINT HEAD    GUESS MY LUCK HAS RUN OUT IN FIXING THE PRINTER

Can not cancel print job hp officejet 8500 in windows 8

I can not cancel print job for a HP officejet 8500 in windows 8
This question was solved.
View Solution.

Hi,
From the Desktop, hold down the Windows key and press R. Into the Run window, type services.msc and hit enter. Browse down to the print spooler service, right click it and select Properties then click on the Stop button. Now browse to C:\Windows\System32\Spool\PRINTERS and delete the job inside this folder - You may need to click a prompt to gain the appropriate authority to open the PRINTERS folder.
Restart the computer and you should find the document(s) have been removed.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

TS4006 how can i cancel request for erasing iPhone?? i pressed erase an iphone instead of lost mode or display message =( i want to cancel this operation

how can i cancel request for erasing iPhone?? i pressed erase an iphone instead of lost mode or display message =( i want to cancel this operation
my lost iphone is still offline and erasing not started yet and i want to cancel this request!

You can't, but after the erasure the activation lock will still be in place, so the device will be useless for anyone not knowing your apple-id and password.

How can I fix this printer error with Samsung SCX-4300 and SCX-4521f on Windows Server 2008 R2?

I have two printers installed on Windows Server 2008 R2 (64-bit):
1. Samsung SCX-4521f
2. Samsung SCX-4300
There are two computers (Windows 7 Professional, 32-Bit) connected to this server that utilise these shared printers.
The drivers installed are as follows:
SCX-4x21_Win7_Print.exe (Win 2000/XP/2003/Vista/2008/Win 7 3.04.96:03 Print Driver 11 Dec, 2009 12.37 MULTI LANGUAGE)
SCX-4300_Print.exe (Win 2000/XP/2003/Vista/2008/Win 7(32,64bit) 3.04.95:07 Print Driver Jan 19, 2011 53.07 MULTI LANGUAGE)
After printing documents for some time (within a 24 period) the printers no longer respond to print requests.
On the server opening "Control Panel\Hardware\Devices and Printers" shows the two printers with yellow exclamation marks.
The "SCX-4x21" printer shows the "Status" as "Needs troubleshooting" and "Printer: Error".
The "SCX-4300" printer shows the "Status" as "Needs troubleshooting".
Neither will print a test page.
Searching for new drivers automatically returns saying: "The best driver software for your device is already installed".
The error persists and nothing will print.
When double-clicking on the "SCX-4x21" printer (or going to "Control Panel\Hardware\Devices and Printers\Samsung SCX-4x21 Series") you see the following:
"Printer: Error" and "N document(s) in queue".
Clicking on either of these brings up the print queue and shows a document with the status of "Error - Printing".
As each job with an error is cancelled the next one attempts to print and also displays an error like the last.
Once all the jobs are cleared the printer information says "Printer: Ready".
Sending a "Print Test Page" sends the printer into an error state saying "Printer: Error".
With the "SCX-4300", sending a "Print Test Page" displays a bubble saying: "Toner Empty: Replace Toner".
However, I can't see any specific error messages.
How do I find out what exactly "Needs troubleshooting"?
Please can anyone advise further?

The printer (SCX-4300) has stopped again.
Since it has been stopped I have done your recommendations:
Unticked the "Enable bidirectional support" option under the "Ports" tab in the printer properties.
Set the "Interactive Services Detection" to Automatic and started it.
Unfortunately the printer did not start printing, the print jobs did not restart or delete.
I decided to check the Operational logs that we enabled.
The first job I see goes like this:
Information: Rendering job 41.
Error: The print spooler failed to delete the file C:\Windows\system32\spool\PRINTERS\00041.SHD, error code 0x2. See the event user data for context information.
Information: The print job 41 was sent through the print processor SSE1MPC on printer Samsung SCX-4300 Series, driver Samsung SCX-4300 Series, in the isolation mode 1 (0 - loaded in the spooler, 1 - loaded in shared sandbox, 2 - loaded in isolated
sandbox). Win32 error code returned by the print processor: 0x0.
Information:Printing job 41.
Information:Spooling job 41.
This job actually printed.
Other jobs printed fine with no error.
There are no other errors in the "Operational" log other than the "print spooler failed to delete" error.
Any ideas what to try now?
Update: Unticking the "Enable bidirectional support", clearing the print queue and then trying again seems to have fixed the problem for now.

C7280 prints multiple copies of any print request

I have a Photosmart C7280. It is connected wirelessly to three computers at home. One is running Win7 (Home Premium), one is running Vista (Home Premium, SP1), and one is running XP (Home, SP3). It works perfectly with the XP machine.
However, when printing any document (simplex or duplex, single page or many pages) from the Win7 or Vista computers, it is printed on this printer multiple times. It has nothing to do with the number of copies requested. I have reinstalled the printer software several times and it has made no difference. One time I reinstalled it I requested the test page to be printed, and I watched as it printed copy after copy of this single page sent from the installation package . I left it just to see how many it would produce. After about 25 I opened the printer activity window on the PC and saw that the status was 'Printing' as you would expect. However, as each page was produced, the status changed to 'Printing - Restarting', and another copy came out. I suspect this would go on forever. Both parts of the Pages entry (x/y) seemed to change, with numbers I couldn't understand. Hitting Cancel on the printer just cancels that particular copy and another just comes along. The only way to stop it is to cancel the print from the PC. This is a bit tedious to say the least.
It will print an unknown number of copies of any document sent to it from Word or Excel. Printing from Adobe Acrobat sometimes does it right, and sometimes produces multiple copies. Switching it off and on has no effect as it just resumes from where it left off.
I contacted HP's email support a while ago but they tried to fix the wrong problem (not printing at all - I'm not sure if they actually read the problem as I laid it out, which was much the same as I have given above). When the issue finally penetrated it was a case of 'this is too complicated to deal with by email - you'll have to phone tech support'. At a price though. So, does anyone here have any ideas before I spend a fortune on phone bills? All the MAC and IP addresses seem set right (same on all machines), and turning off ZoneAlarm makes no difference. The problem has survived a change in my wireless router.
This hasn't been a huge issue for us as most of the printing on this machine has been done from the XP machine, but that's about to get replaced and any new one will come with Win7, no doubt. I'd like to get this resolved before that happens.

Thanks for your reply... searching on Google one can see that's an issue that plagues HP printers and not only under Windows. It must be an issue with the printer or its driver because it happens also under several versions of Mac OS X. Good luck to you I hope by now you solved the issue on your own. The support by HP is abysmal! My client's OfficeJet 4500 series has the same issues under OS X still unresolved.
My current solution (may not work for you): sell the HP printer and buy a different one. I've been burnt by Epson many times so that's no option either, but for SOHO uses, I found Brother Inkjets (like the MFP-J835DW I just took a chance on) to work fairly well across Macs and PCs. Works great for me so I recommend to all my SOHO clients. No more ink and paper gets wasted, but most importantly no more time wasted in frustrations caused by sub-par printers with sub-par drivers and non-existing support... unless coming across to helping a client who made the mistake to buy an HP.
I'm set, no more HP (or Epson) for me so that's what I'd suggest, save money and time and get as far away as possible from HP they've shown they are not worthy of your business by leaving you stranded and shunning customers so why even consider investing your hard earned money in their products? Bring your business elsewhere.

Can't cancel a print request?

Similar Messages

Maybe you are looking for