Can't connect to any webpages with any browser
Our Powerbook G4 can not connect to any webpages with any browser (safari, firefox, IE) but other TCP/IP applications work fine. IE, the AOL application can connect via TCP/IP, iChat and skype both work fine.
Any idea?
Thanks,
Alan
It sounds to me like either a DNS server issue, or your Mac is looking for a web proxy and not finding it.
If you don't have the DNS server filled out in your network settings, find out the DNS IP info from an ISP and try inputting it.
Also, click on the Proxies tab in Network Settings to see if you have a proxy configuration listed (either automatic config or manually inputted proxies per port). If you do, disable the proxies and try again. If not, see if you can get the web proxy info for where you are from either your ISP or your work place.
Similar Messages
-
I can't connect to I tunes with my I pad 3, it say cannot connect to I tune store, any tips on how to overcome this issue, thanks.
Usually it's because you are not making internet connection via wifi.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Cheers, Tom -
After I upgraded to IOS 8 my iPhone is not working well at all .. the most serious issue is the wifi which is too slow and can't connect to apple store and can't update my application .. also tried to search or update for ios 8 but also can't connect . safari also always can't connect to any the server . please check and advise
Hey ahmedfromtanta,
Thanks for the question. After reviewing your post, it sounds like trouble with Wi-Fi. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iOS: Troubleshooting Wi-Fi networks and connections
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
Can't Connect to any WiFi network
I just got my iPhone yesterday and I'm already having a serious problem,I can't connect to any WiFi networks.
I can see the networks around me and I can select networks that I've setup and I know are open or I know the security passwords, I can even enter the network passwords for the ones that require them and it accepts them without complaint. When I select a network I get a little check mark next to that network which I assumes means it should be connected to that network. However, the iPhone never actually connects to them, i.e. no IP address, no router no nothing in the network settings screen for each network, and always appears to the using the Edge wireless network when accessing the internet.
I've tried DHCP and static IP but neither works.
I updated the phones software to 1.1.4, has anybody reported problems like this with this or any version of the software.
Any help would be much appriciated.
If I can't get this resolved today I'm returning to the AT&T store tonight for a new one.
Thanks
Matt S.theevilone,
I have personally used an iPhone with routers from D-Link, Netgear, Linksys, Apple and Belkin.
Some routers, regardless of manufacturer need to have their firmware updated. Generally speaking if you look at the release notes, the same updates that resolve issues with DHCP for game systems and PDAs, also resolves them for the iPhone.
In addition hardware or MAC address filtering can cause issues where you connect to the network and not get DHCP.
Hope this helps,
Nathan C. -
Can't connect to any players on game center
I'm able to connect to game center just not actual players.
I purchased street fighter volt and noticed that my connection times out when attempting to connect to players. This started 3 days ago.
Since then I tried using my other game center apps and while I can post scores I can't connect to any players for actual multiplayer matches.
My connection just times out. It's not my wifi since I've done numerous test with other consoles and my router has open nat and port set up for gaming.
Any ideas? ThxUpdate:
Tested in other networks and still can't get any matches to connect. Also my iPod has no restrictions for multiplayer .
My iPod isn't jailbroken and running 4.3.5 now.
Anybody? -
Airport Extreme can't connect to any server
I can't connect to any websites using my Airport Extreme, which worked fine until yesterday, everything is set up correctly and Network assistant tells me I'm connected to the internet. Every website I try to open (in Safari, Opera, and Firefox) gives me a message that I can't connect to the server, same with Mail. Everything works fine with an Airport Express or plugging directly to the modem. All of this started yesterday when my internet was down, but the airport never came back. I've tried resetting to factory defaults, and yes I've unplugged everything about 400 times. Anyone experience anything like this before?
joshIt sounds like when the Internet went down, the modem got "confused" and didn't remember that the 802.11n AirPort Extreme Base Station (AEBSn) was connected to it.
Please try the following:
o Power-down the modem, AEBSn & computers. Order is not critical.
o While the power is off, check to see if the modem employs a backup batter. If it does, temporarily remove it, and then, replace it.
o Power-on the modem. If it has one, press and hold the modem's reset button for at least 3-5 seconds. After power-up or reset, wait at least 10-15 minutes.
o Power-on the AEBSn; wait at least 5-10 minutes.
o Power-on the computer(s).
Your computers should be able to access the Internet (& access web sites) now. Please post back your results. -
Can't connect to any secure WiFi network. Help...!
Hello,
I am unable to connect to any secure wifi network. Using iPhone 5, Model : MD300B/A, Software : 6.1.4 (10B350). Whenever I try to connect to any secure wifi network, it says password incorrect. But it connects fine with unsecured networks. Double checked the same secure networks with my iPad and it works fine. Tried reseting the network settings and all settings. Updated to latest firmware (6.1.4). Still not working.
Please help.
Regards,
MadhavanI have the same problem. I can't connect to any password protected networks. I type in the correct password, but I'm unable to login. I don't have the option for the iphone to forget the network, because I've never been able to log in and therefore there is nothing to forget. The option doesn't even come up. Is anyone else having this problem? It is this way for 2 different networks.
-
Can't connect to any wireless networks
My macbook pro can't connect to any wireless networks outside of my home router. I've just taken it on holiday and I can't use it in any free wireless coffee shops or hotels.
Whenever i select a network it shows it's connected with black bars in the radar icon but I cant access the internet or mail. Most frustrating is it's working fine in windows when I use boot camp.
I hope someone can helpSometimes they can be stored in your Router and/or Modem, but having them in your Mac makes it so you don't have to rely on what's in or not in other's Routers.
I don't understand DNS...
Simply put.. you type in apple.com, your Browser goes out to a DNS Server somewhere with the request to link to the number of that name, then comes back with 17.254.3.183... if you ever wonder, you could type in that 17.254.3.183 IP, if it doesn't load Apple, then you are not connected to the Internet, yet if it does, and apple.com doesn't... then it's just that nothing is looking up the addy! -
My iPhone 4s has been update as I said in subject bar.. Now can't connect to any of my cars Bluetooth systems. Also even more frustratingly can't connect to any wifi networks at home or work!!
How can apple put out such an update that causes so much grief and inconvenience to hundreds of people. Not to mention risking lives with Bluetooth kits not working...outraged!!!!!!First, grow up. Just because YOUR phone isn't working, doesn't mean Apple put out bad software. I've not had any difficulty, nor has anyone else I know. And just how is Apple risking lives with Bluetooth kits not working? It's YOUR decision to talk on the phone or text and drive. Not Apple's.
We're users here, volunteering our time to help others. Posts like yours, which are whiny and ranting, simply means we're likely to ignore you and not provide you with any help. Not to mention, it makes you look absolutely foolish.
Further making you look foolish is the fact that you haven't even asked a technical support question, nor have you provided anyone here with any troubleshooting steps you might have taken, including those recommended in the user guide.
Good luck getting help.
GDG -
I have a MacBook Pro. My mac can detect wifi. But will not connect anywhere. I did get connected via TCP/IP settings but I can't connect to any wifi anywhere. Network diagnostic has a green light for wi-fi and wi-fi settings. Red light for the rest. (Network settings, ISP, Internet and server.)
Hello NotAppleSavy,
Thanks for the question. After reviewing your post, it sounds like the computer wont connect to networks. I see you have used network diagnostic. I would recommend that you read this article, there are a lot of other things you can do in this article that may be able to help you resolve or isolate the issue.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
Can we connect to any SAP system if we have connection details.
Hi Experts,
Can we connect to any SAP system if we have connection details.
In this thread I found Diego Lombardini asking connection details.
Needed help on this report
I am working in ABAP for couple of years but donu2019t have much idea about connection to SAP system, Please let me know how it is possible .
High points will be rewarded for any helpful answer.
Regards
BikasHi Bikas,
That reply is just because Diego got irritated by Ravi asking the same question in many threads many times .
Otherwise if a SAP server is not secureed using secureclient you can always connect to that SAP system using the internet and your own SAP GUI ( perhaps based on the GUI compatibility )
But i bet, nobody will reveal SAP server as open for you.
Cheers
Kothand -
I have an iphone 4s, and i can not connect to any wirless router through wifi??
i have an iphone 4s and i can not connect to any wirless router using wifi, the only way it to put it in the freezer for a few minutes and the i only get like 5 minutes of wifi time and the the connection drops again and the phone can not even recognize the network??
any help??!!Seriously...and where did you get this tech tip? You do realize that all iPhone 4S's are still under warranty, although there's a very good chance your freezer trick has tripped a moisture sensor, thus voiding your warranty. Make an appointment at an Apple store, but be prepared for bad news. Good luck.
-
Can't connect to any networks while aboard
Hi, I am on holidays in Ireland and can't connect to any networks here. My mobile is a galaxy mini s4.
Any help much appreciated!
Thanks
TaraDid you enable roaming on your a/c before you left? You may still be able to via your online a/c. Buying a roaming pack doesn't in itself enable roaming. See Roaming – Everything you need to know!.
-
Can I connect to the internet with an Ipad in Santo Domingo, DR while I'm on vacation?
Can I connect to the internet with an Ipad in Santo Domingo, DR while I'm on vacation?
Lots of hotels in the DR have WiFi. And there is plenty of cellular coverage in Santo Domingo (and elsewhere).
One thing to be careful of, the WiFi networks are usually not secured and are very vulnerable to people "listening" for passwords and user names, so don't do any financial transactions online and perhaps consider setting up some temporary passwords for the trip and changing them when you get home.
-dan -
How can I connect NetBeans 6.1 with SQL Server 2005?
Hello guys...
how can i connect NetBeans 6.1 with SQL Server 2005?
there is no SQL Server in Server list when we create a new Web Project and choose Server.
I'm new to NetBeans and this is my first time of posting.
If has some errors and unwanted disturbing,pls understand me. Thanks.
(If you have references or some snippets, i'll be glad if u can share.)
scsfdevThe JDBC-ODBC bridge wasn't recognizing any of the primary keys I had set up in SQL Server. After lots of head banging, here's the solution I came up with:
1. Download the appropriate driver. SQL Server 2000 requires the SQL Server 2000 JDBC driver (http://www.microsoft.com/downloads/details.aspx?FamilyId=07287B11-0502-461A-B138-2AA54BFDC03A&displaylang=en).
SQL Server 2005 download: (http://www.microsoft.com/downloads/details.aspx?familyid=C47053EB-3B64-4794-950D-81E1EC91C1BA&displaylang=en)
3. After installing, right-click on "Libraries" in your project, and choose "Add Library...". Next, give it a name (i.e. SQLServer2000), and select "Class Libraries".
4. On the next screen, find the JAR files (should be in C:\Program Files\Microsoft SQL Server 2000 Driver for JDBC\lib\), and add them under the "Classpath" tab. It will now be available under "Libraries" for future projects.
5. You can now create a connection to a specific database under the "Services" tab (next to "Projects" and "Files" in the top left of the screen). Select "Microsoft Sql Server 2000 (Microsoft Driver)" and format the "Database URL" like this:
jdbc:microsoft:sqlserver//YOURSERVER:1433;DatabaseName=YOURDATABASE
1433 is the default port, though your DBA may have changed it.
I posted a simpler version of this on the NetBeans.org FAQ page - they had the following title with no content on the answer page:
"Cannot Select Tables From MsSql 2000 Because It Says No Primary Key Next To Each Table But The Tables DO Have A Primary Key. What Do I Do?"
Maybe you are looking for
-
Automating Importing a Visio OLE Object or Changing the Source of a Previously Imported OLE Object
My colleagues and I import our Visio files into FrameMaker 10 via the following mechanism: File > Import > Object... > Create from File (with Link checked). We do this because, for us, the benefits of object linking and embedding outweight the pitfa
-
So yesterday i found out that my iPhone's screen is making a creepy sound when i push the upper right corner of the screen (loud and cracky) so i immediately took it to apple, the genius told me she can definitely hear the sound, she opened the iPhon
-
Illustrator and other CS4 Apps crashing in snow leopard
Hello, Just upgraded from 10.5.8 to 10.6 and am having some very serious CS4 issues. I first noticed in flash when it constantly kept crashing on save. Now it seems that same issue is also on Illustrator durring open or save or export. I went over to
-
How do I sync albums made on iPhone 4 with iPhoto on my MacBook? Photo stream syncs fine.
-
Forced to render same audio every time I export
My source material is all synced with audio in 8 timelines ranging from 45 min to 4 hours and I am editing from those, nesting into new working timelines. These original sequences need to be rerendered nearly every time I am working, even though I ha